Mikko Närhi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mikko Närhi has a total of 48 co-authors. Here are the top co-authors by number of shared publications:
- Goëry Genty
Tampere University
14 shared publications Cyril Billet
Institut FEMTO-ST, Université Bourgogne Franche-Comté, CNRS UMR 6174, 25000, Besançon, France
7 shared publicationsJohn M. Dudley
Institut FEMTO-ST, UMR 6174 CNRS-Université Bourgogne Franche-Comté, Besançon, France
6 shared publicationsJean-Marc Merolla
Institut FEMTO-ST, UMR 6174 CNRS-Université Bourgogne Franche-Comté, Besançon, France
5 shared publications- John. M. Dudley
Universite Bourgogne Franche-Comte
5 shared publications - Benjamin Wetzel
Université de Limoges, XLIM, UMR CNRS 7252, Limoges, France
4 shared publications
Latest Publications
- Open Access
- 31 October 2024
- Published by EDP Sciences in EPJ Web of Conferences
- Vol. 309, 07006
Design of nonlinear pulse shaper for flexible repetition rate ultrashort pulse generation
Nonlinear pulse shaping based on Mamyshev regenerator is a powerful approach for ultrashort pulse generation. The performance strongly depends on the initial seed parameters. We investigate and design a nonlinear pulse shaper seeded by a long pulsed gain-switched laser diode for generation of high quality ultrashort pulses with flexible repetition rate. The shaper architecture provides more flexibility on the input diode requirements and can yield shorter pulses with the improved laser relative intensity noise. The system optimization is based on numerical simulations mapping the favourable parameters at each stage of the system and enabling identification of limiting factors.
- 31 October 2024
- Published by EDP Sciences in EPJ Web of Conferences
- Vol. 309, 07006
Open AccessDesign of nonlinear pulse shaper for flexible repetition rate ultrashort pulse generation
Nonlinear pulse shaping based on Mamyshev regenerator is a powerful approach for ultrashort pulse generation. The performance strongly depends on the initial seed parameters. We investigate and design a nonlinear pulse shaper seeded by a long pulsed gain-switched laser diode for generation of high quality ultrashort pulses with flexible repetition rate. The shaper architecture provides more flexibility on the input diode requirements and can yield shorter pulses with the improved laser relative intensity noise. The system optimization is based on numerical simulations mapping the favourable parameters at each stage of the system and enabling identification of limiting factors.
- Open Access
- 5 July 2024
- Published by Optica Publishing Group in Optics Letters
- Vol. 49 (14) , 3882-3885
Coherent beam combining of optical vortices
We experimentally demonstrate the power scaling of optical vortices using the coherent beam combining technique, encompassing topological charges ranging from ℓ = 1 to ℓ = 5 realized on the basis of a Yb-doped fiber short-pulsed laser system. The combining efficiency varies from 83.2 to 96.9% depending on the topological charge and beam pattern quality generated by the spatial light modulators. This work is a proof of concept for using a coherent beam combining technique to surpass the physical power/energy limitation of any single source of optical vortices, regardless of the generation methods employed. These results open a pathway to power scaling of optical vortices with diverse applications in science and industry by utilizing advances in light–matter interactions.
- 5 July 2024
- Published by Optica Publishing Group in Optics Letters
- Vol. 49 (14) , 3882-3885
Open AccessCoherent beam combining of optical vortices
We experimentally demonstrate the power scaling of optical vortices using the coherent beam combining technique, encompassing topological charges ranging from ℓ = 1 to ℓ = 5 realized on the basis of a Yb-doped fiber short-pulsed laser system. The combining efficiency varies from 83.2 to 96.9% depending on the topological charge and beam pattern quality generated by the spatial light modulators. This work is a proof of concept for using a coherent beam combining technique to surpass the physical power/energy limitation of any single source of optical vortices, regardless of the generation methods employed. These results open a pathway to power scaling of optical vortices with diverse applications in science and industry by utilizing advances in light–matter interactions.
- 30 April 2024
- Published by Optica Publishing Group in Optics Letters
- Vol. 49 (9) , 2473-2476
Reference-free dual-comb spectroscopy with inbuilt coherence
We demonstrate a simple system for dual-comb spectroscopy based on two inherently coherent optical frequency combs generated via seeded parametric downconversion. The inbuilt coherence is established by making the two combs share a common comb line. We show that the inbuilt coherence makes it possible to use a simple numerical post-processing procedure to compensate for small drifts of the dual-comb interferogram arrival time and phase. This enables long-time coherent averaging of the interferograms.
- 30 April 2024
- Published by Optica Publishing Group in Optics Letters
- Vol. 49 (9) , 2473-2476
Reference-free dual-comb spectroscopy with inbuilt coherence
We demonstrate a simple system for dual-comb spectroscopy based on two inherently coherent optical frequency combs generated via seeded parametric downconversion. The inbuilt coherence is established by making the two combs share a common comb line. We show that the inbuilt coherence makes it possible to use a simple numerical post-processing procedure to compensate for small drifts of the dual-comb interferogram arrival time and phase. This enables long-time coherent averaging of the interferograms.
- Open Access
Towards Ultimate High-Power Scaling: Coherent Beam Combining of Fiber Lasers
Fiber laser technology has been demonstrated as a versatile and reliable approach to laser source manufacturing with a wide range of applicability in various fields ranging from science to industry. The power/energy scaling of single-fiber laser systems has faced several fundamental limitations. To overcome them and to boost the power/energy level even further, combining the output powers of multiple lasers has become the primary approach. Among various combining techniques, the coherent beam combining of fiber amplification channels is the most promising approach, instrumenting ultra-high-power/energy lasers with near-diffraction-limited beam quality. This paper provides a comprehensive review of the progress of coherent beam combining for both continuous-wave and ultrafast fiber lasers. The concept of coherent beam combining from basic notions to specific details of methods, requirements, and challenges is discussed, along with reporting some practical architectures for both continuous and ultrafast fiber lasers.
Open AccessTowards Ultimate High-Power Scaling: Coherent Beam Combining of Fiber Lasers
Fiber laser technology has been demonstrated as a versatile and reliable approach to laser source manufacturing with a wide range of applicability in various fields ranging from science to industry. The power/energy scaling of single-fiber laser systems has faced several fundamental limitations. To overcome them and to boost the power/energy level even further, combining the output powers of multiple lasers has become the primary approach. Among various combining techniques, the coherent beam combining of fiber amplification channels is the most promising approach, instrumenting ultra-high-power/energy lasers with near-diffraction-limited beam quality. This paper provides a comprehensive review of the progress of coherent beam combining for both continuous-wave and ultrafast fiber lasers. The concept of coherent beam combining from basic notions to specific details of methods, requirements, and challenges is discussed, along with reporting some practical architectures for both continuous and ultrafast fiber lasers.
- 11 October 2021
- Published by Optica Publishing Group in Optics Express
- Vol. 29 (22) , 34977-34985
Amplifier similariton fiber laser with a hybrid-mode-locking technique
By employing both frequency shifting and nonlinear polarization rotation mechanisms in a Yb-doped fiber laser, similariton operation regime is demonstrated. Directly generated pulses from an oscillator has a duration of 7.8 ps with 20.5 nm spectrum width and average output power of 7.4 mW with a repetition rate of 26.4 MHz. The pulses can be externally dechirped to be 140 fs. Through numerical simulations we illustrate the details of similariton pulse formation under the simultaneous action of two mode-locking techniques and advantages of hybrid mode-locking approach.
- 11 October 2021
- Published by Optica Publishing Group in Optics Express
- Vol. 29 (22) , 34977-34985
Amplifier similariton fiber laser with a hybrid-mode-locking technique
By employing both frequency shifting and nonlinear polarization rotation mechanisms in a Yb-doped fiber laser, similariton operation regime is demonstrated. Directly generated pulses from an oscillator has a duration of 7.8 ps with 20.5 nm spectrum width and average output power of 7.4 mW with a repetition rate of 26.4 MHz. The pulses can be externally dechirped to be 140 fs. Through numerical simulations we illustrate the details of similariton pulse formation under the simultaneous action of two mode-locking techniques and advantages of hybrid mode-locking approach.
- Open Access
- 7 May 2021
- Published by Optica Publishing Group in Optics Express
- Vol. 29 (10) , 15699-15710
Design guidelines for ultrashort pulse generation by a Mamyshev regenerator
We study numerically the possibility of using various gain-switched seed laser pulse parameters and fibers for a low-cost, all-fiber Mamyshev regenerator scheme. We find that for increasing pulse durations, sufficient spectral broadening will be difficult to achieve in practice and careful design of the system parameters is required for the regenerator to function. Furthermore, an optimal input peak power level can be defined for a given fiber and pulse duration that results from a balance of competing Kerr effect and stimulated Raman scattering. We also demonstrate experimental results of 3 ps pulse generation seeded by an 80 ps gain-switched diode. Our results pave the way for designing pulse-on-demand picosecond scale fiber sources for applications.
- 7 May 2021
- Published by Optica Publishing Group in Optics Express
- Vol. 29 (10) , 15699-15710
Open AccessDesign guidelines for ultrashort pulse generation by a Mamyshev regenerator
We study numerically the possibility of using various gain-switched seed laser pulse parameters and fibers for a low-cost, all-fiber Mamyshev regenerator scheme. We find that for increasing pulse durations, sufficient spectral broadening will be difficult to achieve in practice and careful design of the system parameters is required for the regenerator to function. Furthermore, an optimal input peak power level can be defined for a given fiber and pulse duration that results from a balance of competing Kerr effect and stimulated Raman scattering. We also demonstrate experimental results of 3 ps pulse generation seeded by an 80 ps gain-switched diode. Our results pave the way for designing pulse-on-demand picosecond scale fiber sources for applications.
- 25 April 2019
- Published by Optica Publishing Group in Journal of the Optical Society of America B
- Vol. 36 (5) , 1320-1326
Interferometric autocorrelation measurements of supercontinuum based on two-photon absorption
We report on interferometric autocorrelation measurements of broadband supercontinuum light in the anomalous dispersion regime using two-photon absorption in a GaP photodetector. The method is simple and low-cost and provides a direct measure of second-order coherence properties, including quantitative information on coherence time and average duration of the supercontinuum pulses as well as on the presence of temporally coherent sub-structures. We report measurements in regimes where the supercontinuum is coherent and incoherent. In the former case, the interferometric measurements are similar to what is observed for mode-locked laser pulses, while in the latter case, the interferometric measurements and coherence properties are shown to have characteristics similar to those of a stationary chaotic light source.
- 25 April 2019
- Published by Optica Publishing Group in Journal of the Optical Society of America B
- Vol. 36 (5) , 1320-1326
Interferometric autocorrelation measurements of supercontinuum based on two-photon absorption
We report on interferometric autocorrelation measurements of broadband supercontinuum light in the anomalous dispersion regime using two-photon absorption in a GaP photodetector. The method is simple and low-cost and provides a direct measure of second-order coherence properties, including quantitative information on coherence time and average duration of the supercontinuum pulses as well as on the presence of temporally coherent sub-structures. We report measurements in regimes where the supercontinuum is coherent and incoherent. In the former case, the interferometric measurements are similar to what is observed for mode-locked laser pulses, while in the latter case, the interferometric measurements and coherence properties are shown to have characteristics similar to those of a stationary chaotic light source.
- Open Access
- 22 November 2018
- Published by Springer Nature in Nature Communications
- Vol. 9 (1) , 1-11
Machine learning analysis of extreme events in optical fibre modulation instability
A central research area in nonlinear science is the study of instabilities that drive extreme events. Unfortunately, techniques for measuring such phenomena often provide only partial characterisation. For example, real-time studies of instabilities in nonlinear optics frequently use only spectral data, limiting knowledge of associated temporal properties. Here, we show how machine learning can overcome this restriction to study time-domain properties of optical fibre modulation instability based only on spectral intensity measurements. Specifically, a supervised neural network is trained to correlate the spectral and temporal properties of modulation instability using simulations, and then applied to analyse high dynamic range experimental spectra to yield the probability distribution for the highest temporal peaks in the instability field. We also use unsupervised learning to classify noisy modulation instability spectra into subsets associated with distinct temporal dynamic structures. These results open novel perspectives in all systems exhibiting instability where direct time-domain observations are difficult.
- 22 November 2018
- Published by Springer Nature in Nature Communications
- Vol. 9 (1) , 1-11
Open AccessMachine learning analysis of extreme events in optical fibre modulation instability
A central research area in nonlinear science is the study of instabilities that drive extreme events. Unfortunately, techniques for measuring such phenomena often provide only partial characterisation. For example, real-time studies of instabilities in nonlinear optics frequently use only spectral data, limiting knowledge of associated temporal properties. Here, we show how machine learning can overcome this restriction to study time-domain properties of optical fibre modulation instability based only on spectral intensity measurements. Specifically, a supervised neural network is trained to correlate the spectral and temporal properties of modulation instability using simulations, and then applied to analyse high dynamic range experimental spectra to yield the probability distribution for the highest temporal peaks in the instability field. We also use unsupervised learning to classify noisy modulation instability spectra into subsets associated with distinct temporal dynamic structures. These results open novel perspectives in all systems exhibiting instability where direct time-domain observations are difficult.
- Top Cited Papers
- 5 March 2018
- Published by Springer Nature in Nature Photonics
- Vol. 12 (4) , 221-227
Real-time full-field characterization of transient dissipative soliton dynamics in a mode-locked laser
- 5 March 2018
- Published by Springer Nature in Nature Photonics
- Vol. 12 (4) , 221-227
Top Cited PapersReal-time full-field characterization of transient dissipative soliton dynamics in a mode-locked laser
- 1 January 2018
- Published by Optica Publishing Group
- p. AF2Q.1
Real-time Measurements of Nonlinear Instabilities in Optical Fibers
We review recent advances in the real-time characterization of instabilities in nonlinear fiber optics systems. In particular, we show how these techniques can provide novel insight into the dynamics of ultrafast complex optical systems.
- 1 January 2018
- Published by Optica Publishing Group
- p. AF2Q.1
Real-time Measurements of Nonlinear Instabilities in Optical Fibers
We review recent advances in the real-time characterization of instabilities in nonlinear fiber optics systems. In particular, we show how these techniques can provide novel insight into the dynamics of ultrafast complex optical systems.