AWAnna Sofia Westermeier

Anna Sofia Westermeier

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Anna Sofia Westermeier has a total of 58 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Facing the Green Threat: A Water Flea’s Defenses against a Carnivorous Plant

    by Sebastian Kruppert, Martin Horstmann, Linda C. Weiss, Elena Konopka, Nadja Kubitza, Simon Poppinga, Anna S. Westermeier, Thomas Speck, Ralph Tollrian

    Every ecosystem shows multiple levels of species interactions, which are often difficult to isolate and to classify regarding their specific nature. For most of the observed interactions, it comes down to either competition or consumption. The modes of consumption are various and defined by the nature of the consumed organism, e.g., carnivory, herbivory, as well as the extent of the consumption, e.g., grazing, parasitism. While the majority of consumers are animals, carnivorous plants can also pose a threat to arthropods. Water fleas of the family Daphniidae are keystone species in many lentic ecosystems. As most abundant filter feeders, they link the primary production to higher trophic levels. As a response to the high predatory pressures, water fleas have evolved various inducible defenses against animal predators. Here we show the first example, to our knowledge, in Ceriodaphnia dubia of such inducible defenses of an animal against a coexisting plant predator, i.e., the carnivorous bladderwort (Utricularia x neglecta Lehm, Lentibulariaceae). When the bladderwort is present, C. dubia shows changes in morphology, life history and behavior. While the morphological and behavioral adaptations improve C. dubia’s survival rate in the presence of this predator, the life-history parameters likely reflect trade-offs for the defense.


  • Open Access

    Facing the green threat: A waterflea’s defenses against a carnivorous plant

    by Sebastian Kruppert, Martin Horstmann, Linda C. Weiss, Elena Barmaeva, Nadja Kubitza, Simon Poppinga, Anna S. Westermeier, Thomas Speck, Ralph Tollrian

    Water fleas of the family Daphniidae are keystone species in many lentic ecosystems and, as most abundant filter feeders, link the primary production to higher trophic levels. As a response to the high predatory pressures, water fleas have evolved a range of defenses, including inducible defenses against animal predators. Here we show inCeriodaphnia dubiaa first example of such defenses induced by the presence of a coexisting plant predator, i.e. the carnivorous southern bladderwort (Utricularia australis, Lentibulariaceae), which possesses ultrafast underwater suction traps. When the bladderwort is present,C. dubiashows changes in morphology, life-history and behavior. While the morphological and behavioral adaptations improveC. dubia’ssurvival rate in the presence of this predator, the life-history parameters likely reflect trade-offs for the defense. Our study demonstrates plant-induced animal defenses, implying their potential relevance in freshwater ecosystems and contributing to an overall yet underestimated biodiversity of inducible defenses.Open Research Statement: Data is not finally prepared for upload yet. Once most fitting file types are determined and metadata is created we aim to upload all raw data as supporting information.

  • Open Access

    Structural gradients and anisotropic hydraulic conductivity in the enigmatic eel traps of carnivorous corkscrew plants (Genlisea spp.)

    by Cora F. Carmesin, Andreas S. Fleischmann, Matthias M. Klepsch, Anna S. Westermeier, Thomas Speck, Steven Jansen, Simon Poppinga

    Premise: Among the sophisticated trap types in carnivorous plants, the underground eel traps of corkskrew plants (Genlisea spp., Lentibulariaceae) are probably the least understood in terms of their functional principle. Here, we provide a detailed analysis of structural and hydraulic features of G. hispidula traps, contributing to the ongoing debate on whether these traps can actively generate water streams to promote prey capture.Methods: Anatomical and hydraulic traits of detached traps, including inner trap diameters, chamber line element, hair length, glandular pattern, and hydraulic conductivity, were investigated quantitatively using light and electron microscopy, x‐ray microtomography, and hydraulic measurements.Results: Hydraulic resistivity in the neck of the trap, from the trap mouth toward the vesicle (digestive chamber) was 10 times lower than in the opposite direction. The comparison of measured and theoretical flow rates suggests that the retrorse hairs inside trap necks also provide considerable resistance against movement of matter toward the vesicle. Hairs showed a gradient in length along the neck, with the shortest hairs near the vesicle. Co‐occurrence of quadrifid and bifid glands was limited to a small part of the neck, with quadrifids near the vesicle and bifids toward the trap mouth.Conclusions: The combination of structural gradients with hydraulic anisotropy suggests the trap is a highly fine‐tuned system based on likely trade‐offs between efficient prey movement in the trap interior toward the vesicle, prey retention, and spatial digestion capacities and is not counter to the generation of water streams.


  • Top Cited Papers

    Snapping mechanics of the Venus flytrap (Dionaea muscipula)

    by Renate Sachse, Anna Westermeier, Max Mylo, Joey Nadasdi, Manfred Bischoff, Thomas Speck, Simon Poppinga

    Significance: The rapid closure of the carnivorous Venus flytrap (Dionaea muscipula) snap-trap incorporates snap-buckling instability as a speed boost. The trap actuation principles required to overcome the involved energy barrier, as determined by the double-lobe curvature, have remained speculative until now. Here we used 3D digital image correlation for the analysis of trap deformation during closure for both the outer and the inner trap surfaces. Accompanying biomechanical and physiological experiments revealed that successful snapping relies on full trap hydration. In combination with FEM simulations elucidating the mechanical contribution of the various trap tissues to the motion, we show that the trapping mechanics incorporate an elaborate interplay between swelling/shrinking processes of the various tissue layers and the release of trap-internal prestress.


  • 4D pine scale: biomimetic 4D printed autonomous scale and flap structures capable of multi-phase movement

    by David Correa, Simon Poppinga, Max D. Mylo, Anna S. Westermeier, Bernd Bruchmann, Achim Menges, Thomas Speck

    We developed biomimetic hygro-responsive composite polymer scales inspired by the reversible shape-changes of Bhutan pine ( Pinus wallichiana ) cone seed scales. The synthetic kinematic response is made possible through novel four-dimensional (4D) printing techniques with anisotropic material use, namely copolymers with embedded cellulose fibrils and ABS polymer. Multi-phase motion like the subsequent transversal and longitudinal bending deformation during desiccation of a natural pinecone scale can be structurally programmed into such printed hygromorphs. Both the natural concept generator (Bhutan pinecone scale) and the biomimetic technical structure (4D printed scale) were comparatively investigated as to their displacement and strain over time via three-dimensional digital image correlation methods. Our bioinspired prototypes can be the basis for tailored autonomous and self-sufficient flap and scale structures performing complex consecutive motions for technical applications, e.g. in architecture and soft robotics. This article is part of the theme issue ‘Bioinspired materials and surfaces for green science and technology (part 3)’.


  • Open Access

    Prey capture analyses in the carnivorous aquatic waterwheel plant (Aldrovanda vesiculosa L., Droseraceae)

    by Simon Poppinga, Jassir Smaij, Anna Sofia Westermeier, Martin Horstmann, Sebastian Kruppert, Ralph Tollrian, Thomas Speck

    We investigated the predator-prey interactions between an Australian ecotype of the carnivorous waterwheel plant (Aldrovanda vesiculosa, Droseraceae) and its potential natural prey, the water flea Daphnia longicephala (Daphniidae), which also occurs in Australia. A. vesiculosa develops snap-traps, which close within ~10–100 ms after mechanical triggering by zooplankton prey. Prey capture attempts (PCAs) were recorded via high-speed cinematography in the laboratory. From 14 recorded PCAs, nine were successful for the plant (the prey was caught), and five were unsuccessful (prey could escape), resulting in a capture rate of ~64%. The prey animals’ locomotion behaviour (antenna beat frequency and movement type) in trap vicinity or inside the open traps is very variable. Traps were mainly triggered with the second antennae. During trap closure, the animals moved only very little actively. A flight response in reaction to an initiated trap closure was not observed. However, several animals could escape, either by having a “lucky” starting position already outside the triggered trap, by freeing themselves after trap closure, or by being pressed out by the closing trap lobes. According to our observations in the successful PCAs, we hypothesize that the convex curvature of the two trap lobes (as seen from the outside) and the infolded trap rims are structural means supporting the capture and retention of prey. Our results are discussed in a broader biological context and promising aspects for future studies are proposed.


  • Adaptive Biomimetic Actuator Systems Reacting to Various Stimuli by and Combining Two Biological Snap-Trap Mechanics

    by Falk Esser, Frank D. Scherag, Simon Poppinga, Anna Westermeier, Max D. Mylo, Tim Kampowski, Georg Bold, Jürgen Rühe, Thomas Speck


  • Open Access

    How the carnivorous waterwheel plant (Aldrovanda vesiculosa) snaps

    by Anna S. Westermeier, Renate Sachse, Simon Poppinga, Philipp Vögele, Lubomir Adamec, Thomas Speck, Manfred Bischoff

    The fast motion of the snap-traps of the terrestrial Venus flytrap (Dionaea muscipula) have been intensively studied, in contrast to the tenfold faster underwater snap-traps of its phylogenetic sister, the waterwheel plant (Aldrovanda vesiculosa). Based on biomechanical and functional–morphological analyses and on a reverse biomimetic approach via mechanical modelling and computer simulations, we identify a combination of hydraulic turgor change and the release of prestress stored in the trap as essential for actuation. Our study is the first to identify and analyse in detail the motion principle ofAldrovanda, which not only leads to a deepened understanding of fast plant movements in general, but also contributes to the question of how snap-traps may have evolved and also allows for the development of novel biomimetic compliant mechanisms.


  • Flectofold—a biomimetic compliant shading device for complex free form facades

    by A Körner, L Born, A Mader, R Sachse, S Saffarian, A S Westermeier, S Poppinga, M Bischoff, G T Gresser, M Milwich, et al.

    Smart and adaptive outer façade shading systems are of high interest in modern architecture. For long lasting and reliable systems, the abandonment of hinges which often fail due to mechanical wear during repetitive use is of particular importance. Drawing inspiration from the hinge-less motion of the underwater snap-trap of the carnivorous waterwheel plant ( Aldrovanda vesiculosa ), the compliant façade shading device Flectofold was developed. Based on computational simulations of the biological role-model’s elastic and reversible motion, the actuation principle of the plant can be identified. The enclosed geometric motion principle is abstracted into a simplified curved-line folding geometry with distinct flexible hinge-zones. The kinematic behaviour is translated into a quantitative kinetic model, using finite element simulation which allows the detailed analyses of the influence of geometric parameters such as curved-fold line radius and various pneumatically driven actuation principles on the motion behaviour, stress concentrations within the hinge-zones, and actuation forces. The information regarding geometric relations and material gradients gained from those computational models are then used to develop novel material combinations for glass fibre reinforced plastics which enabled the fabrication of physical prototypes of the compliant façade shading device Flectofold.


  • Open Access

    Trap diversity and character evolution in carnivorous bladderworts (Utricularia, Lentibulariaceae)

    by Anna Sofia Westermeier, Andreas Fleischmann, Kai Müller, Bastian Schäferhoff, Carmen Rubach, Thomas Speck, Simon Poppinga

    Bladderworts (Utricularia, Lentibulariaceae, Lamiales) constitute the largest genus of carnivorous plants but only aquatic species (about one fifth of the genus) have so far been thoroughly studied as to their suction trap functioning. In this study, we comparatively investigated trap biomechanics in 19 Utricularia species to examine correlations between life-forms, trapping mechanisms, and functional-morphological traits. Our investigations show the existence of two functional trap principles (passive trap in U. multifida vs. active suction traps), and – in active suction traps – three main trapdoor movement types (with several subtypes). The trapdoor movement types and their corresponding functional-morphological features most presumably represent adaptations to the respective habitat. We furthermore give insights into fluid dynamics during suction in three representatives of the main types of trapdoor movement. The results on functional morphology and trapdoor movement were mapped onto a new phylogenetic reconstruction of the genus, derived from the rapidly evolving chloroplast regions trnK, rps16 and trnQ-rps16 and a sampling of 105 Utricularia species in total. We discuss potential scenarios of trap character evolution and species radiation, highlighting possible key innovations that enable such a unique carnivorous lifestyle in different habitats.