Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Marco Stoller has a total of 76 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Sustainable Valorization of Kiwifruit Waste: Aroma and Pectin Recovery via Pervaporation and Extraction

    by Giuseppina Adiletta, Marco Stoller, Paola Russo

    In line with the principles of a circular and sustainable economy, this study explores a multi‐step approach for the recovery, identification, and quantification of aroma compounds and pectin from kiwifruit waste. Pervaporation experiments were conducted at temperatures ranging from 15°C to 45°C to assess their effect on the composition of permeate fractions. Higher temperatures (35°C and 45°C) enhanced permeate yield, with a significant increase from 0.91% ± 0.07% at 15°C to 1.75% ± 0.06% at 45°C ( p < 0.05). At 35°C, 1‐hexanol reached its highest concentration (4.336 ± 1.784 ppm), and 3‐octanone was detected exclusively (0.539 ± 0.140 ppm), confirming this as the optimal temperature for aroma enrichment. Additionally, kiwi pomace was valorized through the extraction of high‐methoxyl pectin using acid and enzymatic methods. The purity of the recovered pectin was confirmed by FT‐IR and DSC analyses. The pectin extracted with citric acid showed a degree of esterification of 64.93%, and the DSC thermogram exhibited a distinct endothermic peak at 175°C, characteristic of pectin melting. These findings demonstrate an efficient strategy for the valorization of kiwifruit waste, supporting sustainable resource utilization in the food industry. Compared to conventional valorization methods, often focused on either pectin or aroma recovery separately, this study introduces an integrated approach that combines selective pervaporation and green extraction techniques. This not only enhances compound recovery efficiency but also minimizes the use of harsh chemicals, offering a more sustainable alternative.

  • Production of model drug carried liposomes by means of a SDR for dermatology applications

    by Maoling Sun, Xinghua Gao, Xuegang Xu, Ruiqun Qi, Kunyu Jiang, Marco Stoller

  • Open Access

    Physical-Chemical Characterization of Different Carbon-Based Sorbents for Environmental Applications

    by Simone Marzeddu, María Alejandra Décima, Luca Camilli, Maria Paola Bracciale, Virgilio Genova, Laura Paglia, Francesco Marra, Martina Damizia, Marco Stoller, Agostina Chiavola, et al.

    Biochar has been used in various applications, e.g., as a soil conditioner and in remediation of contaminated water, wastewater, and gaseous emissions. In the latter application, biochar was shown to be a suitable alternative to activated carbon, providing high treatment efficiency. Since biochar is a by-product of waste pyrolysis, its use allows for compliance with circular economics. Thus, this research aims to obtain a detailed characterization of three carbonaceous materials: an activated carbon (CARBOSORB NC 1240®) and two biochars (RE-CHAR® and AMBIOTON®). In particular, the objective of this work is to compare the properties of three carbonaceous materials to evaluate whether the application of the two biochars is the same as that of activated carbon. The characterization included, among others, particle size distribution, elemental analysis, pH, scanning electron microscope, pore volume, specific surface area, and ionic exchange capacity. The results showed that CARBOSORB NC 1240® presented a higher specific surface (1126.64 m2/g) than AMBIOTON® (256.23 m2/g) and RE-CHAR® (280.25 m2/g). Both biochar and activated carbon belong to the category of mesoporous media, showing a pore size between 2 and 50 nm (20–500 Å). Moreover, the chemical composition analysis shows similar C, H, and N composition in the three carbonaceous materials while a higher O composition in RE-CHAR® (9.9%) than in CARBOSORB NC 1240 ® (2.67%) and AMBIOTON® (1.10%). Differences in physical and chemical properties are determined by the feedstock and pyrolysis or gasification temperature. The results obtained allowed to compare the selected materials among each other and with other carbonaceous adsorbents.


  • Open Access

    Editorial for the Special Issue on “Process Intensification Techniques for the Production of Nanoparticles”

    by Giorgio Vilardi, Marco Stoller

    According to ISO/TS 80004, a nanomaterial is defined as the “material with any external dimension in the nanoscale or having internal structure or surface structure in the nanoscale”, with nanoscale defined as the “length range approximately from 1 nm to 100 nm”


  • Open Access

    Multi-Response Optimization of Coagulation and Flocculation of Olive Mill Wastewater: Statistical Approach

    by Srikanth Vuppala, Riyaaz Uddien Shaik, Marco Stoller

    Olive oil production is one of the important industrial sectors within the agro-food framework of the Mediterranean region, economically important to the people working in this sector, although there is also a threat to the environment due to residues. The main wastes of the olive oil extraction process are olive mill wastewater (OMW) and olive husks which also require proper treatment before dismissal. In this research work, the main goal is to introduce grey relational analysis, a technique for multi-response optimization, to the coagulation and flocculation process of OMW to select the optimum coagulant dosage. The coagulation and flocculation process was carried out by adding aluminum sulfate (Alum) to the waste stream in different dosages, starting from 100 to 2000 mg/L. In previous research work, optimization of this process on OMW was briefly discussed, but there is no literature available that reports the optimal coagulant dosage verified through the grey relational analysis method; therefore, this method was applied for selecting the best operating conditions for lowering a combination of multi-responses such as chemical oxygen demand (COD), total organic carbon (TOC), total phenols and turbidity. From the analysis, the 600 mg/L coagulant dosage appears to be top ranked, which obtained a higher grey relational grade. The implementation of statistical techniques in OMW treatment can enhance the efficiency of this process, which in turn supports the preparation of waste streams for further purification processes in a sustainable way.


  • Open Access

    Nanocomposites Photocatalysis Application for the Purification of Phenols and Real Olive Mill Wastewater through a Sequential Process

    by Srikanth Vuppala, Marco Stoller

    In this study, a synthetic phenol solution of water and raw olive mill wastewater (OMW) were considered to achieve purification of the aqueous streams from pollutants. Only OMW was initially submitted to a coagulation/flocculation process, to reduce the turbidity, phenols, and chemical oxygen demand (COD). This first treatment appeared to be mandatory in order to remove solids from wastewater, allowing the successive use of laboratory-made core-shell nanocomposites. In detail, the optimal coagulant concentration, i.e., chitosan, was 500 mg/L, allowing a reduction of the turbidity and the COD value by 90% and 33%, respectively. After this, phenol wastewater was tested for photocatalysis and then OMW was treated by employing the laboratory-made nanocomposites in a photoreactor equipped with visible light sources and using optimal catalyst concentrations, which allowed for an additional 45% reduction of the COD of the OMW. In addition to this, the effect of the operating temperature was investigated on the photocatalytic process, and suitable kinetic models proposed.


  • Open Access

    ZnO Nano-Particles Production Intensification by Means of a Spinning Disk Reactor

    by Marco Stoller, Javier Miguel Ochando-Pulido

    Zinc Oxide is widely used in many industrial sectors, ranging from photocatalysis, rubber, ceramic, medicine, and pigment, to food and cream additive. The global market is estimated to be USD 3600M yearly, with a global production of 10 Mt. In novel applications, size and shape may sensibly increase the efficiency and a new nano-ZnO market is taking the lead (USD 2000M yearly with a capacity of 1 Mt and an expected Compound Annual Growth Rate of 20%/year). The aim of this work was to investigate the possibility of producing zinc oxide nanoparticles by means of a spinning disk reactor (SDR). A lab-scale spinning disk reactor, previously used to produce other nanomaterials such as hydroxyapatite or titania, has been investigated with the aim of producing needle-shaped zinc oxide nanoparticles. At nanoscale and with this shape, the zinc oxide particles exhibit their greatest photoactivity and active area, both increasing the efficiency of photocatalysis and ultraviolet (UV) absorbance. Working at different operating conditions, such as at different disk rotational velocity, inlet distance from the disk center, initial concentration of Zn precursor and base solution, and inlet reagent solution flowrate, in certain conditions, a unimodal size distribution and an average dimension of approximately 56 nm was obtained. The spinning disk reactor permits a continuous production of nanoparticles with a capacity of 57 kg/d, adopting an initial Zn-precursor concentration of 0.5 M and a total inlet flowrate of 1 L/min. Product size appears to be controllable, and a lower average dimension (47 nm), adopting an initial Zn-precursor concentration of 0.02 M and a total inlet flow-rate of 0.1 L/min, can be obtained, scarifying productivity (0.23 kg/d). Ultimately, the spinning disk reactor qualifies as a process-intensified equipment for targeted zinc oxide nanoparticle production in shape in size.


  • Open Access

    On the Micromixing Behavior of a Spinning Disk Reactor for Metallic Cu Nanoparticles Production

    by Angela Marchetti, Marco Stoller

    The interest in producing copper nanoparticles is high, mainly due to their enhanced properties, a wide range of possible and different applications, and the possibility for their use in the framework of catalysis. The purpose of this study is to synthesize copper nanoparticles by chemical reduction of copper sulfate with L-ascorbic acid and sodium borohydride capable to eliminate free radicals providing an antioxidant environment promoting pure copper nuclei formation. The micromixing conditions necessary for the nanoparticles production are provided by a spinning disk reactor (SDR). Relevant operational parameters, such as the disk speed velocity and the position of the reactant injectors, will lead to different product outcomes. The latter was checked by means of a dynamic light scattering instrument (DLS). At the end, depending on the adopted operating conditions, the SDR was able to produce particles between 16 nm and 39 nm, with a particle size distribution (PSD) characterized by a narrow, monomodal plot. In comparison to the smallest particles obtained in a stirred reactor tank, that is, 132 nm, the obtained results appear to be very promising.