Zhengliang Huang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Zhengliang Huang has a total of 86 co-authors. Here are the top co-authors by number of shared publications:
Yongrong Yang
College of Chemical and Biological Engineering Zhejiang University Hangzhou China
22 shared publications- Jingdai Wang
State Key Laboratory of Chemical Engineering, Zhejiang Provincial Key Laboratory of Advanced Chemical Engineering Manufacture Technology, College of Chemical and Biological Engineering, Zhejiang University, Hangzhou, 310027, P.R. China.
20 shared publications - Jingyuan Sun
College of Chemical and Biological Engineering Zhejiang University Hangzhou China
17 shared publications - Yao Yang
College of Chemical and Biological Engineering Zhejiang University Hangzhou China
17 shared publications - Zuwei Liao
Zhejiang University
11 shared publications Jingdai Wang
State Key Laboratory of Chemical Engineering College of Chemical and Biological Engineering, Zhejiang University Hangzhou China
10 shared publications
Latest Publications
- 30 September 2026
- Published by Wiley in AIChE Journal
- p. e70678
A novel acceleration approach for free radical polymerization simulation: Coupled pre‐sequencing Monte Carlo model
Monte Carlo (MC) simulation is one of the most powerful methods for predicting the detailed molecular architecture of free radical polymerization products, but its efficiency is severely limited by stepwise random selection of massive elementary reactions. To address this challenge, we propose an accelerated approach termed the coupled pre‐sequencing MC model. Unlike previous hybrid models, the proposed approach first completes the deterministic calculation of reaction rates throughout the entire reaction process and converts the elementary reaction rates into reaction counts within each coarse‐grained unit. The detailed chain structure information lost in the deterministic model is then recovered through MC simulation. To further enhance the efficiency of this process, a unique pre‐sequencing strategy is designed, which includes executing initiator decomposition in advance, treating propagation reactions as a queue, and inserting low‐frequency reactions. Simulation results for LDPE and EVA production demonstrate high accuracy and substantially reduced computational cost.
- 30 September 2026
- Published by Wiley in AIChE Journal
- p. e70678
A novel acceleration approach for free radical polymerization simulation: Coupled pre‐sequencing Monte Carlo model
Monte Carlo (MC) simulation is one of the most powerful methods for predicting the detailed molecular architecture of free radical polymerization products, but its efficiency is severely limited by stepwise random selection of massive elementary reactions. To address this challenge, we propose an accelerated approach termed the coupled pre‐sequencing MC model. Unlike previous hybrid models, the proposed approach first completes the deterministic calculation of reaction rates throughout the entire reaction process and converts the elementary reaction rates into reaction counts within each coarse‐grained unit. The detailed chain structure information lost in the deterministic model is then recovered through MC simulation. To further enhance the efficiency of this process, a unique pre‐sequencing strategy is designed, which includes executing initiator decomposition in advance, treating propagation reactions as a queue, and inserting low‐frequency reactions. Simulation results for LDPE and EVA production demonstrate high accuracy and substantially reduced computational cost.
- 4 March 2026
- Published by Wiley in AIChE Journal
The modulation effect of entrained particles on slurry jets containing liquid hydrocarbons
In fluidized bed reactors, the breakup of feed jet affects chemical reactions, particle aggregation and reactor operation. For slurry jets containing liquid hydrocarbons, which entrain particles and undergo intense evaporation, the breakup behaviors are complex. Investigating the modulation effects of entrained particles on the morphology and turbulence characteristics of slurry jets requires simultaneously obtaining gas–liquid–solid three‐phase information. Therefore, this study simultaneously employs shadowgraph technique and schlieren technique. The results indicate that when the temperature is within the boiling range of jet, particles enhance fluctuations and breakup of jet, promote generation and dispersion of droplet, as well as improve rotational, divergent, and convergent motions of the flow field. When the temperature exceeds the boiling range, the jet undergoes intense atomization and evaporation, leading to strong convective motion, which weakens the rotational, divergent, and convergent motions in the central region of the jet while enhancing such motions at the jet periphery.
- 4 March 2026
- Published by Wiley in AIChE Journal
The modulation effect of entrained particles on slurry jets containing liquid hydrocarbons
In fluidized bed reactors, the breakup of feed jet affects chemical reactions, particle aggregation and reactor operation. For slurry jets containing liquid hydrocarbons, which entrain particles and undergo intense evaporation, the breakup behaviors are complex. Investigating the modulation effects of entrained particles on the morphology and turbulence characteristics of slurry jets requires simultaneously obtaining gas–liquid–solid three‐phase information. Therefore, this study simultaneously employs shadowgraph technique and schlieren technique. The results indicate that when the temperature is within the boiling range of jet, particles enhance fluctuations and breakup of jet, promote generation and dispersion of droplet, as well as improve rotational, divergent, and convergent motions of the flow field. When the temperature exceeds the boiling range, the jet undergoes intense atomization and evaporation, leading to strong convective motion, which weakens the rotational, divergent, and convergent motions in the central region of the jet while enhancing such motions at the jet periphery.
- 30 July 2025
- Published by Wiley in AIChE Journal
Predicting initiator efficiency in high‐pressure polymerization with decomposition network and diffusion dynamics
Accurate prediction of peroxide initiator efficiency in high‐pressure radical polymerization is crucial yet challenging. This study develops a predictive method integrating the decomposition network of peroxide initiator and diffusion dynamics. The decomposition network is constructed using the Reaction Mechanism Generator and refined via Density Functional Theory calculations, while diffusion is described by free volume theory. Key parameters, including diffusion coefficients, rate constants, and radical distances, are incorporated for a comprehensive evaluation. To enhance accuracy, different model parameters are recommended for initiators with varying structures. Validation against experimental data confirms the high accuracy of the method. Additionally, the influence of polymerization pressure on initiator efficiency is elucidated. The method applies to various industrial peroxide initiators and certain non‐peroxide ester initiators, demonstrating broad utility. These findings offer valuable theoretical guidance for initiator design and optimization in industrial free radical polymerization.
- 30 July 2025
- Published by Wiley in AIChE Journal
Predicting initiator efficiency in high‐pressure polymerization with decomposition network and diffusion dynamics
Accurate prediction of peroxide initiator efficiency in high‐pressure radical polymerization is crucial yet challenging. This study develops a predictive method integrating the decomposition network of peroxide initiator and diffusion dynamics. The decomposition network is constructed using the Reaction Mechanism Generator and refined via Density Functional Theory calculations, while diffusion is described by free volume theory. Key parameters, including diffusion coefficients, rate constants, and radical distances, are incorporated for a comprehensive evaluation. To enhance accuracy, different model parameters are recommended for initiators with varying structures. Validation against experimental data confirms the high accuracy of the method. Additionally, the influence of polymerization pressure on initiator efficiency is elucidated. The method applies to various industrial peroxide initiators and certain non‐peroxide ester initiators, demonstrating broad utility. These findings offer valuable theoretical guidance for initiator design and optimization in industrial free radical polymerization.
- 1 August 2023
- Published by Wiley in AIChE Journal
- Vol. 69 (11)
Contact electrification polarity of polyethylene particles: A morphology‐derived anomalous size dependence
The size dependence of contact electrification (CE) for the same material particles is a common but poorly understood phenomenon. Generally, smaller particles acquire negative charges and larger particles positive charges. However, we discover that polyethylene particles can exhibit the opposite polarity under certain conditions. We demonstrate that the particle morphology, such as sphericity and surface roughness, plays a crucial role in determining the polarity, with more spherical and smoother particles being positively charged. This morphology effect can even alter the relative positions of materials in the triboelectric series. We propose a model that incorporates both the morphology and size effects to explain CE of the same material particles. The model successfully reproduces all our experimental results and predicts a nontrivial cyclic triboelectric sequence that we further confirm experimentally. This article reveals new insights into the nonequilibrium charge transfer mechanisms in CE.
- 1 August 2023
- Published by Wiley in AIChE Journal
- Vol. 69 (11)
Contact electrification polarity of polyethylene particles: A morphology‐derived anomalous size dependence
The size dependence of contact electrification (CE) for the same material particles is a common but poorly understood phenomenon. Generally, smaller particles acquire negative charges and larger particles positive charges. However, we discover that polyethylene particles can exhibit the opposite polarity under certain conditions. We demonstrate that the particle morphology, such as sphericity and surface roughness, plays a crucial role in determining the polarity, with more spherical and smoother particles being positively charged. This morphology effect can even alter the relative positions of materials in the triboelectric series. We propose a model that incorporates both the morphology and size effects to explain CE of the same material particles. The model successfully reproduces all our experimental results and predicts a nontrivial cyclic triboelectric sequence that we further confirm experimentally. This article reveals new insights into the nonequilibrium charge transfer mechanisms in CE.
- 25 April 2023
- Published by Wiley in AIChE Journal
- Vol. 69 (8)
A graph theory assisted Monte Carlo algorithm for simulating the topology structure of LDPE and connection with molecular dynamics simulation
Precise simulation of the topology structure of low‐density polyethylene (LDPE) chain is significant for product properties research. However, the chain structure symbolization methods in literature all rely on specially designed methods or temporary tricks, which are hard to understand and may induce some deviations in branch distribution prediction. To overcome this problem, a graph theory assisted Monte Carlo algorithm is developed for chain topology structure simulation of LDPE. The new symbolization method provides better accuracy and is much easy for code implementation and integration in other software. In detail, the average long chain branching predicted by this method is always smaller than that predicted by traditional methods, and much closer to the experimental results. Furthermore, the predicted topology structure information of LDPE chains can be provided as input data for molecular dynamics simulation to study the crystal process, and the predicted crystallinity and density also show good agreement with experiments.
- 25 April 2023
- Published by Wiley in AIChE Journal
- Vol. 69 (8)
A graph theory assisted Monte Carlo algorithm for simulating the topology structure of LDPE and connection with molecular dynamics simulation
Precise simulation of the topology structure of low‐density polyethylene (LDPE) chain is significant for product properties research. However, the chain structure symbolization methods in literature all rely on specially designed methods or temporary tricks, which are hard to understand and may induce some deviations in branch distribution prediction. To overcome this problem, a graph theory assisted Monte Carlo algorithm is developed for chain topology structure simulation of LDPE. The new symbolization method provides better accuracy and is much easy for code implementation and integration in other software. In detail, the average long chain branching predicted by this method is always smaller than that predicted by traditional methods, and much closer to the experimental results. Furthermore, the predicted topology structure information of LDPE chains can be provided as input data for molecular dynamics simulation to study the crystal process, and the predicted crystallinity and density also show good agreement with experiments.
- 11 November 2022
- Published by Wiley in AIChE Journal
- Vol. 69 (1)
Dynamic densification of wet granular materials in continuous dense flows under gravity
The continuous granular flow under gravity extensively exists in chemical processes, and the dynamic behaviors of granular flow under different gas–liquid environments are investigated by synchronous slide‐type high‐speed photography. Results show that a hexagonal arrangement is observed after three‐stage densification in wet granular flow, while these structures are almost absent in the dry system. Further analysis shows that under the induction of liquid, the special cavity collapse in stage І is the pre‐condition of granular densification, and the subsequent densification in stage ІІ for the first time gives the experimental proof for the hypothesis that energy barriers exist and depend on the friction characteristics, and the cage effect in stage ІІІ provides a guarantee for the formation of a hexagonal contact network. Besides, three‐stage densification in the three‐phase system mainly occurs in the region with low gas and liquid velocities (G* < 0.716 and L* < 0.023 in this work).
- 11 November 2022
- Published by Wiley in AIChE Journal
- Vol. 69 (1)
Dynamic densification of wet granular materials in continuous dense flows under gravity
The continuous granular flow under gravity extensively exists in chemical processes, and the dynamic behaviors of granular flow under different gas–liquid environments are investigated by synchronous slide‐type high‐speed photography. Results show that a hexagonal arrangement is observed after three‐stage densification in wet granular flow, while these structures are almost absent in the dry system. Further analysis shows that under the induction of liquid, the special cavity collapse in stage І is the pre‐condition of granular densification, and the subsequent densification in stage ІІ for the first time gives the experimental proof for the hypothesis that energy barriers exist and depend on the friction characteristics, and the cage effect in stage ІІІ provides a guarantee for the formation of a hexagonal contact network. Besides, three‐stage densification in the three‐phase system mainly occurs in the region with low gas and liquid velocities (G* < 0.716 and L* < 0.023 in this work).
- Open Access
Enhancing Methane Conversion by Modification of Zn States in Co-Reaction of MTA
Limited by harsh reaction conditions, the activation and utilization of methane were regarded as holy grail reaction. Co-reaction with methanol, successfully realizing mild conversion below 450 °C, provides practical strategies for methane conversion on metal-loaded ZSM-5 zeolites, especially for highly efficient Zn loaded ones. However, Zn species, regarded as active acid sites on the zeolite, have not been sufficiently studied. In this paper, Zn-loaded ZSM-5 zeolite was prepared, and Zn was modified by capacity, loading strategy, and treating atmosphere. Apparent methane conversion achieves 15.3% for 1.0Zn/Z-H2 (16.8% as calculated net conversion) with a significantly reduced loading of 1.0 wt.% against deactivation, which is among the best within related zeolite materials. Besides, compared to the MTA reaction, the addition of methane promotes the high-valued aromatic production from 49.4% to 54.8%, and inhibits the C10+ production from 7.8% to 3.6%. Notably, Zn2+ is found to be another active site different from the reported ZnOH+. Medium strong acid sites are proved to be beneficial for methane activation. This work provides suggestions for the modification of the Zn active site, in order to prepare highly efficient catalysts for methane activation and BTX production in co-reaction with methanol.
Open AccessEnhancing Methane Conversion by Modification of Zn States in Co-Reaction of MTA
Limited by harsh reaction conditions, the activation and utilization of methane were regarded as holy grail reaction. Co-reaction with methanol, successfully realizing mild conversion below 450 °C, provides practical strategies for methane conversion on metal-loaded ZSM-5 zeolites, especially for highly efficient Zn loaded ones. However, Zn species, regarded as active acid sites on the zeolite, have not been sufficiently studied. In this paper, Zn-loaded ZSM-5 zeolite was prepared, and Zn was modified by capacity, loading strategy, and treating atmosphere. Apparent methane conversion achieves 15.3% for 1.0Zn/Z-H2 (16.8% as calculated net conversion) with a significantly reduced loading of 1.0 wt.% against deactivation, which is among the best within related zeolite materials. Besides, compared to the MTA reaction, the addition of methane promotes the high-valued aromatic production from 49.4% to 54.8%, and inhibits the C10+ production from 7.8% to 3.6%. Notably, Zn2+ is found to be another active site different from the reported ZnOH+. Medium strong acid sites are proved to be beneficial for methane activation. This work provides suggestions for the modification of the Zn active site, in order to prepare highly efficient catalysts for methane activation and BTX production in co-reaction with methanol.
- 27 October 2021
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 60 (44) , 15951-15959
Tailoring the Chain Entanglement by Nitrogen Bubble-Assisted Polymerization
- 27 October 2021
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 60 (44) , 15951-15959
Tailoring the Chain Entanglement by Nitrogen Bubble-Assisted Polymerization
- 17 July 2021
- Published by Wiley in AIChE Journal
- Vol. 67 (11) , e17374
Flow regimes in a gas–liquid–solid three‐phase moving bed
The gas–liquid–solid three‐phase moving beds could supply a potential solution for multiphase reactions with catalyst easily deactivated, and the flow regimes in it were studied by optical method and pressure drop measurement. Results showed that taking the trickle flow as the initial flow regime, the flow channels were more obvious as the particle velocity increased. When the initial flow regimes were pulse flow and bubble flow respectively, the pulse‐to‐trickle and bubble‐to‐pulse flow transitions mainly occurred at moderate‐to‐high particle velocities (0.01–0.04 m s−1 under conditions used in this work). Moreover, the flow regime map in the three‐phase moving bed was constructed and shown that the region of trickle flow increased and the region of bubble flow decreased. Finally, the application of three‐phase moving beds was discussed, and it could be suitable for those reactions, which had to operate in the pulse flow, bubble flow, and transition zone.
- 17 July 2021
- Published by Wiley in AIChE Journal
- Vol. 67 (11) , e17374
Flow regimes in a gas–liquid–solid three‐phase moving bed
The gas–liquid–solid three‐phase moving beds could supply a potential solution for multiphase reactions with catalyst easily deactivated, and the flow regimes in it were studied by optical method and pressure drop measurement. Results showed that taking the trickle flow as the initial flow regime, the flow channels were more obvious as the particle velocity increased. When the initial flow regimes were pulse flow and bubble flow respectively, the pulse‐to‐trickle and bubble‐to‐pulse flow transitions mainly occurred at moderate‐to‐high particle velocities (0.01–0.04 m s−1 under conditions used in this work). Moreover, the flow regime map in the three‐phase moving bed was constructed and shown that the region of trickle flow increased and the region of bubble flow decreased. Finally, the application of three‐phase moving beds was discussed, and it could be suitable for those reactions, which had to operate in the pulse flow, bubble flow, and transition zone.
- 6 January 2021
- Published by Wiley in AIChE Journal
- Vol. 67 (5)
Dynamic characteristics of the volatile cloudy zone in a gas–solid fluidized bed with hydrocarbon liquid spray
In a gas–solid fluidized bed with continuous hydrocarbon liquid spray, a volatile “cloudy zone” could be formed, defined as a dynamically steady liquid‐affected zone, including droplets, wet particles, and the gas which passes through the zone. A new flow pattern with the dynamic coexistence of cloudy zone and non‐cloudy zone (gas–solid zone), is accordingly established. The temperature, particle concentration, and particle velocity fields are measured in real‐time via infrared thermography and particle imaging velocimetry, respectively. Results show that the area and range of central position of the cloudy zone illustrate a heavier fluctuant trend with the increasing velocity of liquid spray, and the main frequency of area fluctuation is close to that of the bubble rising. Moreover, the particle concentration and particle velocity in the cloudy zone are lower than those in the non‐cloudy zone, breaking the conventional symmetrical distributions of hydrodynamic parameters of particles in a gas–solid fluidized bed.
- 6 January 2021
- Published by Wiley in AIChE Journal
- Vol. 67 (5)
Dynamic characteristics of the volatile cloudy zone in a gas–solid fluidized bed with hydrocarbon liquid spray
In a gas–solid fluidized bed with continuous hydrocarbon liquid spray, a volatile “cloudy zone” could be formed, defined as a dynamically steady liquid‐affected zone, including droplets, wet particles, and the gas which passes through the zone. A new flow pattern with the dynamic coexistence of cloudy zone and non‐cloudy zone (gas–solid zone), is accordingly established. The temperature, particle concentration, and particle velocity fields are measured in real‐time via infrared thermography and particle imaging velocimetry, respectively. Results show that the area and range of central position of the cloudy zone illustrate a heavier fluctuant trend with the increasing velocity of liquid spray, and the main frequency of area fluctuation is close to that of the bubble rising. Moreover, the particle concentration and particle velocity in the cloudy zone are lower than those in the non‐cloudy zone, breaking the conventional symmetrical distributions of hydrodynamic parameters of particles in a gas–solid fluidized bed.