Kedar Birid
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Kedar Birid has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
- Deepankar Choudhury
Indian Institute of Technology Bombay
5 shared publications Deepankar Choudhury
Professor T. Kant Chair Professor and Head, Dept. of Civil Engineering, Indian Institute of Technology Bombay, Powai, Mumbai, Maharashtra 400076, India
1 shared publicationMahavir Beniwal
Department of Construction Planning, Toyo Engineering India Pvt. Ltd, Mumbai, India
1 shared publication- Ramvir Singh Chahar
GR Infra Projects Ltd., Gurgaon, India
1 shared publication - Shubhrajit Maitra
The University of Melbourne ‡ Department of Infrastructure Engineering Melbourne, ; Department of Ocean Engineering and Naval Architecture, Indian Institute of Technology Kharagpur, Kharagpur, India
1 shared publication
Latest Publications
- 13 May 2026
- Published by Springer Nature in Innovative Infrastructure Solutions
- Vol. 11 (6) , 292
Empirical liquefaction modeling: a multi-method assessment from indian seismic sites
- 13 May 2026
- Published by Springer Nature in Innovative Infrastructure Solutions
- Vol. 11 (6) , 292
Empirical liquefaction modeling: a multi-method assessment from indian seismic sites
- 27 November 2024
- Published by Taylor & Francis in Geomechanics and Geoengineering
- Vol. 20 (3) , 587-601
Estimation of shear wave velocity using rock mass property of Gemlik, Turkey
- 27 November 2024
- Published by Taylor & Francis in Geomechanics and Geoengineering
- Vol. 20 (3) , 587-601
Estimation of shear wave velocity using rock mass property of Gemlik, Turkey
- 1 November 2022
- Published by American Society of Civil Engineers (ASCE) in Journal of Geotechnical and Geoenvironmental Engineering
- Vol. 148 (11) , 04022088
Failure Envelopes for Ring Foundations Resting on Tresca Soil under Combined Loading
Ring foundations are used to support tall and heavy circular onshore structures such as chimneys, cooling towers, storage tanks, and silos and offshore structures such as wind turbines and annular platforms. The present study focused on developing failure envelopes for ring foundations subjected to the combined loading of vertical ( ), horizontal ( ), and moment ( ). Parametric three-dimensional finite-element limit analyses were carried out for circular and ring foundations resting on the surface of cohesive soil following the Tresca criteria. The failure envelopes were generated separately under , , and loading combinations. Variations in the ring foundation geometry ( ) of 0.2, 0.4, 0.6, and 0.8 and linearly increasing soil heterogeneity values ( ) of 0, 1, 2, 3, 6, and 10 were considered in this study. The results indicated variations in failure loci with a variation in and . The typical contours of failure loads under the combined loadings and three-dimensional failure surface patterns are presented for the ring foundations with and 0.8 to understand the shape of the failure surfaces.- 1 November 2022
- Published by American Society of Civil Engineers (ASCE) in Journal of Geotechnical and Geoenvironmental Engineering
- Vol. 148 (11) , 04022088
Failure Envelopes for Ring Foundations Resting on Tresca Soil under Combined Loading
Ring foundations are used to support tall and heavy circular onshore structures such as chimneys, cooling towers, storage tanks, and silos and offshore structures such as wind turbines and annular platforms. The present study focused on developing failure envelopes for ring foundations subjected to the combined loading of vertical ( ), horizontal ( ), and moment ( ). Parametric three-dimensional finite-element limit analyses were carried out for circular and ring foundations resting on the surface of cohesive soil following the Tresca criteria. The failure envelopes were generated separately under , , and loading combinations. Variations in the ring foundation geometry ( ) of 0.2, 0.4, 0.6, and 0.8 and linearly increasing soil heterogeneity values ( ) of 0, 1, 2, 3, 6, and 10 were considered in this study. The results indicated variations in failure loci with a variation in and . The typical contours of failure loads under the combined loadings and three-dimensional failure surface patterns are presented for the ring foundations with and 0.8 to understand the shape of the failure surfaces.- 1 July 2022
- Published by American Society of Civil Engineers (ASCE) in International Journal of Geomechanics
- Vol. 22 (7) , 07022004
Closure to “Undrained Bearing Capacity Factor N c for Ring Foundations in Cohesive Soil” by Kedar Birid and Deepankar Choudhury
Sponsored by Geotechnical Engineering and Cosponsored by the International Association for Computer Methods and Advances in Geomechanics
- 1 July 2022
- Published by American Society of Civil Engineers (ASCE) in International Journal of Geomechanics
- Vol. 22 (7) , 07022004
Closure to “Undrained Bearing Capacity Factor N c for Ring Foundations in Cohesive Soil” by Kedar Birid and Deepankar Choudhury
Sponsored by Geotechnical Engineering and Cosponsored by the International Association for Computer Methods and Advances in Geomechanics
- 12 May 2022
- Published by Springer Nature in Geotechnical and Geological Engineering
- Vol. 40 (8) , 4269-4288
Earthquake Response of Ring Foundation in Cohesionless Soil
- 12 May 2022
- Published by Springer Nature in Geotechnical and Geological Engineering
- Vol. 40 (8) , 4269-4288
Earthquake Response of Ring Foundation in Cohesionless Soil
- 5 October 2021
- Published by Taylor & Francis in Geomechanics and Geoengineering
- Vol. 17 (6) , 2013-2039
Bearing capacity of ring foundations over a rock mass using numerical analysis
Ring foundations are used for circular industrial structures and often placed over a rock mass. However, the bearing capacity factors for ring foundation are not available in the literature. Hence upper and lower bound finite element limit analysis (FELA) to evaluate the bearing capacity factors for the ring foundation resting over a rock mass. The Hoek-Brown constitutive model was adopted to study variations in the geometry of ring foundation, Geological Strength Index (GSI), intact rock constant (mi), and unit weight of rock mass (γ) on the bearing capacity of the ring foundation. The bearing capacity factors Nσ are presented for the different values of GSI, mi, and γ. The failure patterns under varying ring geometry and the rock mass unit weight are presented and discussed. The results show an increase in the bearing capacity with an increase in Hoek-Brown parameters for a rock mass. The bearing capacity is observed to be decreasing with an increase in the ratio (Ri/Ro) of the inner radius (Ri) to the outer radius (Ro) of the ring foundation. Design tables are provided as a ready reference for practitioners to evaluate the bearing capacity of the ring foundations resting over a rock mass.
- 5 October 2021
- Published by Taylor & Francis in Geomechanics and Geoengineering
- Vol. 17 (6) , 2013-2039
Bearing capacity of ring foundations over a rock mass using numerical analysis
Ring foundations are used for circular industrial structures and often placed over a rock mass. However, the bearing capacity factors for ring foundation are not available in the literature. Hence upper and lower bound finite element limit analysis (FELA) to evaluate the bearing capacity factors for the ring foundation resting over a rock mass. The Hoek-Brown constitutive model was adopted to study variations in the geometry of ring foundation, Geological Strength Index (GSI), intact rock constant (mi), and unit weight of rock mass (γ) on the bearing capacity of the ring foundation. The bearing capacity factors Nσ are presented for the different values of GSI, mi, and γ. The failure patterns under varying ring geometry and the rock mass unit weight are presented and discussed. The results show an increase in the bearing capacity with an increase in Hoek-Brown parameters for a rock mass. The bearing capacity is observed to be decreasing with an increase in the ratio (Ri/Ro) of the inner radius (Ri) to the outer radius (Ro) of the ring foundation. Design tables are provided as a ready reference for practitioners to evaluate the bearing capacity of the ring foundations resting over a rock mass.
- 5 May 2021
- Published by Taylor & Francis in International Journal of Geotechnical Engineering
- Vol. 15 (10) , 1220-1230
Depth factors for ring foundations in cohesive soil using numerical analysis
Shallow foundations are seldom rested on the ground surface and are often embedded below the surface. The undrained bearing capacity of embedded footings and the depth factors associated with it for circular and strip foundations were extensively studied in the past. However, the effect of embedment on the undrained bearing capacity of ring foundations has not received much attention. In this paper, the results of numerical analysis to study the effect of embedment of ring foundations resting on cohesive soil are presented. The influence of variation in the geometry of the ring foundation, the footing side roughness coefficients, and the increasing shear strength of cohesive soil has also been studied. The results show a variation in the depth factors by varying the inner and outer diameter of the ring foundation, footing side roughness coefficient, embedment depth, and increasing shear strength of the soil. Based on the results of the analysis, the authors have proposed an equation to evaluate the depth factors for embedded ring foundations in cohesive soil. The failure pattern of subsoil has also been presented and discussed. The depth factors obtained from this study can be used by practicing engineers to evaluate the bearing capacity of onshore and offshore ring foundations in cohesive soils.
- 5 May 2021
- Published by Taylor & Francis in International Journal of Geotechnical Engineering
- Vol. 15 (10) , 1220-1230
Depth factors for ring foundations in cohesive soil using numerical analysis
Shallow foundations are seldom rested on the ground surface and are often embedded below the surface. The undrained bearing capacity of embedded footings and the depth factors associated with it for circular and strip foundations were extensively studied in the past. However, the effect of embedment on the undrained bearing capacity of ring foundations has not received much attention. In this paper, the results of numerical analysis to study the effect of embedment of ring foundations resting on cohesive soil are presented. The influence of variation in the geometry of the ring foundation, the footing side roughness coefficients, and the increasing shear strength of cohesive soil has also been studied. The results show a variation in the depth factors by varying the inner and outer diameter of the ring foundation, footing side roughness coefficient, embedment depth, and increasing shear strength of the soil. Based on the results of the analysis, the authors have proposed an equation to evaluate the depth factors for embedded ring foundations in cohesive soil. The failure pattern of subsoil has also been presented and discussed. The depth factors obtained from this study can be used by practicing engineers to evaluate the bearing capacity of onshore and offshore ring foundations in cohesive soils.
- 1 May 2020
- Published by Emerald Publishing in Proceedings of the Institution of Civil Engineers - Forensic Engineering
- Vol. 173 (2) , 54-61
Nearshore deep excavation and associated problems in cohesionless soil
This paper presents a case study of piping failure resulting in differential settlement of a nearshore diaphragm wall and highlights the mitigation measures undertaken to stabilise the structure. To facilitate a 15 m deep excavation, a diaphragm wall was constructed and a well-point dewatering system was adopted to keep the water table below the base of the excavation. However, during the foundation work, sand boiling was observed accompanied by foundation heaving and uneven settlement of the wall. A study was done based on field observations and numerical analysis to assess the root cause of the problem. Finite-difference analysis confirmed piping failure of the subsoil as the hydraulic gradient exceeded the critical hydraulic gradient near the base of the diaphragm wall. To mitigate the problem, additional well points were installed at certain locations to bring down the hydraulic gradient within safe limits. The construction was then carried out in stages, and standpipes were installed in the foundation and subsoil to limit the excess pore pressure generated below the foundation during construction. Field monitoring showcased that the development of this excess pore pressure could be minimised, and the rectification measures worked well towards increasing the structural stability of the diaphragm wall.
- 1 May 2020
- Published by Emerald Publishing in Proceedings of the Institution of Civil Engineers - Forensic Engineering
- Vol. 173 (2) , 54-61
Nearshore deep excavation and associated problems in cohesionless soil
This paper presents a case study of piping failure resulting in differential settlement of a nearshore diaphragm wall and highlights the mitigation measures undertaken to stabilise the structure. To facilitate a 15 m deep excavation, a diaphragm wall was constructed and a well-point dewatering system was adopted to keep the water table below the base of the excavation. However, during the foundation work, sand boiling was observed accompanied by foundation heaving and uneven settlement of the wall. A study was done based on field observations and numerical analysis to assess the root cause of the problem. Finite-difference analysis confirmed piping failure of the subsoil as the hydraulic gradient exceeded the critical hydraulic gradient near the base of the diaphragm wall. To mitigate the problem, additional well points were installed at certain locations to bring down the hydraulic gradient within safe limits. The construction was then carried out in stages, and standpipes were installed in the foundation and subsoil to limit the excess pore pressure generated below the foundation during construction. Field monitoring showcased that the development of this excess pore pressure could be minimised, and the rectification measures worked well towards increasing the structural stability of the diaphragm wall.
- 22 September 2015
- Published by Springer Nature in Geotechnical and Geological Engineering
- Vol. 34 (1) , 391-401
An Equation to Evaluate the Unconfined Compressive Strength of Rock from Splitting Tensile Strength Test Results
- 22 September 2015
- Published by Springer Nature in Geotechnical and Geological Engineering
- Vol. 34 (1) , 391-401
An Equation to Evaluate the Unconfined Compressive Strength of Rock from Splitting Tensile Strength Test Results