Alessandro Pagliaroli
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Alessandro Pagliaroli has a total of 42 co-authors. Here are the top co-authors by number of shared publications:
- Attilio Porchia
Institute of Environmental Geology and Geoengineering of the Italian National Research Council
2 shared publications - Edoardo Peronace
Istituto di Geologia Ambientale e Geoingegneria del Consiglio Nazionale delle Ricerche (CNR-IGAG), 00185 Rome, Italy
2 shared publications F. Pergalani
Politecnico di Milano, Milan, Italy
2 shared publicationsG. Lanzo
Sapienza Università di Roma, Rome, Italy
2 shared publications- Giuseppe Brando
Department of Engineering and Geology, “G. d’Annunzio” University of Chieti-Pescara, 65127 Pescara, Italy
2 shared publications - Massimiliano Moscatelli
Institute of Environmental Geology and Geoengineering of the Italian National Research Council
2 shared publications
Latest Publications
- Open Access
- 23 September 2026
- Published by Elsevier in SSRN Electronic Journal
A Simplified Approach for Multi-Hazard Seismic Risk Assessment of Bridges
Current international practices for assessing the risk of bridges exposed to natural hazards typically evaluate hazard threats independently, often overlooking compounding interactions among hazards. To address this critical gap, this paper proposes a novel risk-prioritization framework developed from a multi-hazard perspective, with the index specifically tailored to seismic risk in this version. The proposed framework is structured into a two-tiered operational architecture: a Level 1 qualitative screening phase based on regional hazard and geotechnical databases, and a Level 2 quantitative assessment phase that integrates 1D nonlinear numerical site response analyses, simplified geotechnical models, and hazard-specific structural fragility curves within a scenario-based risk assessment framework. A Probabilistic Graphical Model (PGM) is employed to describe the conditional dependencies among physical and environmental variables, and a Geotechnical-Structural Index (GETI) is proposed to synthesize the combined effects of hazard intensity, geotechnical susceptibility, and structural vulnerability into a single risk metric.The proposed framework is demonstrated through a case study of the Cherry Hill Interchange in Utah, USA, located near the active Wasatch Fault and founded on soft lacustrine-alluvial sediments. The Level 2 analysis identifies liquefaction-induced lateral spreading as the dominant hazard prior to remediation, resulting in large permanent ground displacements and a high probability of severe structural damage. Following the installation of 850 stone columns, liquefaction susceptibility is effectively eliminated, leaving ground shaking as the primary hazard. The corresponding reduction in GETI values highlights the framework’s ability to isolate hazard contributions, evaluate mitigation effectiveness, and support risk-informed infrastructure management and prioritization.
- 23 September 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessA Simplified Approach for Multi-Hazard Seismic Risk Assessment of Bridges
Current international practices for assessing the risk of bridges exposed to natural hazards typically evaluate hazard threats independently, often overlooking compounding interactions among hazards. To address this critical gap, this paper proposes a novel risk-prioritization framework developed from a multi-hazard perspective, with the index specifically tailored to seismic risk in this version. The proposed framework is structured into a two-tiered operational architecture: a Level 1 qualitative screening phase based on regional hazard and geotechnical databases, and a Level 2 quantitative assessment phase that integrates 1D nonlinear numerical site response analyses, simplified geotechnical models, and hazard-specific structural fragility curves within a scenario-based risk assessment framework. A Probabilistic Graphical Model (PGM) is employed to describe the conditional dependencies among physical and environmental variables, and a Geotechnical-Structural Index (GETI) is proposed to synthesize the combined effects of hazard intensity, geotechnical susceptibility, and structural vulnerability into a single risk metric.The proposed framework is demonstrated through a case study of the Cherry Hill Interchange in Utah, USA, located near the active Wasatch Fault and founded on soft lacustrine-alluvial sediments. The Level 2 analysis identifies liquefaction-induced lateral spreading as the dominant hazard prior to remediation, resulting in large permanent ground displacements and a high probability of severe structural damage. Following the installation of 850 stone columns, liquefaction susceptibility is effectively eliminated, leaving ground shaking as the primary hazard. The corresponding reduction in GETI values highlights the framework’s ability to isolate hazard contributions, evaluate mitigation effectiveness, and support risk-informed infrastructure management and prioritization.
- Open Access
- 10 April 2025
- Published by Anil K Agrawal, LLC in International Journal of Bridge Engineering, Management and Research
- Vol. 2 (2) , 214250015
A Novel Quantitative Approach for Multi-hazard Risk Assessment of Linear Infrastructure: a Geological-Geotechnical Index
This study introduces a novel quantitative approach for multi-hazard risk assessment of linear infrastructure, by introducing the GEological-geoTechnical Index (GETI). GETI aims to address the limitations of existing methodologies by incorporating the cascading effects of multiple hazards and providing a comprehensive quantitative assessment tool for stakeholders. This study highlights the challenges in maintaining linear infrastructure, such as bridges and viaducts, and the necessity for standardized procedures to assess their exposure to natural hazards. Current approaches often fail to account for the interconnected nature of multiple hazards, potentially leading to underestimation of risks. The GETI is conceptualized as a two-level analysis process. Level 1 involves assessing hazard susceptibility through a literature review and preliminary surveys, whereas Level 2 encompasses advanced analyses using geological and geotechnical data. The index primarily addresses seismic risk and its secondary effects, including ground motion amplification, soil liquefaction, and landslides/rockfalls. This methodology employs conditional probability to express the concept of the ”cascade effect” in mathematical terms. The GETI is formulated as the probability of damage given the occurrence of an earthquake, considering various magnitudes of damage, from low to severe. This approach allows for a more nuanced understanding of risk compared to qualitative or semi-quantitative indices. This study acknowledges the potential limitations of the GETI, including its dependence on data availability and accuracy, as well as the current focus on seismic hazards. Future research directions are proposed, such as expanding the index to include a broader spectrum of natural hazards, and extending its applicability to other types of linear infrastructure. The GETI represents a significant advancement in multi-hazard risk assessment for linear infrastructure. By providing a quantitative measure that accounts for the interrelated nature of natural hazards, it offers stakeholders a valuable tool for prioritizing risk-reduction measures and ensuring the safety and resilience of critical infrastructure. The ongoing practical application of GETI in case studies in Italy and the United States aims to verify its real-world functionality and effectiveness in infrastructure management.
- 10 April 2025
- Published by Anil K Agrawal, LLC in International Journal of Bridge Engineering, Management and Research
- Vol. 2 (2) , 214250015
Open AccessA Novel Quantitative Approach for Multi-hazard Risk Assessment of Linear Infrastructure: a Geological-Geotechnical Index
This study introduces a novel quantitative approach for multi-hazard risk assessment of linear infrastructure, by introducing the GEological-geoTechnical Index (GETI). GETI aims to address the limitations of existing methodologies by incorporating the cascading effects of multiple hazards and providing a comprehensive quantitative assessment tool for stakeholders. This study highlights the challenges in maintaining linear infrastructure, such as bridges and viaducts, and the necessity for standardized procedures to assess their exposure to natural hazards. Current approaches often fail to account for the interconnected nature of multiple hazards, potentially leading to underestimation of risks. The GETI is conceptualized as a two-level analysis process. Level 1 involves assessing hazard susceptibility through a literature review and preliminary surveys, whereas Level 2 encompasses advanced analyses using geological and geotechnical data. The index primarily addresses seismic risk and its secondary effects, including ground motion amplification, soil liquefaction, and landslides/rockfalls. This methodology employs conditional probability to express the concept of the ”cascade effect” in mathematical terms. The GETI is formulated as the probability of damage given the occurrence of an earthquake, considering various magnitudes of damage, from low to severe. This approach allows for a more nuanced understanding of risk compared to qualitative or semi-quantitative indices. This study acknowledges the potential limitations of the GETI, including its dependence on data availability and accuracy, as well as the current focus on seismic hazards. Future research directions are proposed, such as expanding the index to include a broader spectrum of natural hazards, and extending its applicability to other types of linear infrastructure. The GETI represents a significant advancement in multi-hazard risk assessment for linear infrastructure. By providing a quantitative measure that accounts for the interrelated nature of natural hazards, it offers stakeholders a valuable tool for prioritizing risk-reduction measures and ensuring the safety and resilience of critical infrastructure. The ongoing practical application of GETI in case studies in Italy and the United States aims to verify its real-world functionality and effectiveness in infrastructure management.
- Open Access
- 4 July 2024
- Published by Springer Nature in Bulletin of Earthquake Engineering
- Vol. 22 (10) , 1-44
Seismic site effects in Lisbon: the role of complex geological and morphological conditions
Lisbon’s historical seismicity, socioeconomic importance and population density contribute to a moderate to high seismic risk. The geological setting of the city includes cases of inclined layers, interbedding sedimentary rock layers in soil deposits, sand and clay layers in the same geological unit, leading to cases of shear wave velocity inversion and a large scatter of geotechnical properties within each geological unit. The morphological setting of the city is characterised by the existence of several hills and relatively shallow, stream-carved valleys filled with alluvial deposits. The seismic site effects in Lisbon were assessed through numerical simulation using the linear equivalent method and adopting the two types of seismic action defined in the Portuguese National Annex of Eurocode 8: (i) one-dimensional subsoil models covering the city, at sites where borehole data and geophysical data were available; (ii) two-dimensional subsoil models along three cross-sections representative of the geological settings and morphology. The distribution of amplification factors in the city revealed a pattern related to ground characteristics that impact seismic soil response, such as the presence of high-thickness cover deposits, significant shear-wave variations, alluvial valleys, a crest or significant slope variations and inclined layers. The 2D/1D spectral ratio highlighted the areas were 2D seismic effects are more important. The soil factor determined in the numerical analyses was consistently greater than the soil factor values indicated in Eurocode 8.
- 4 July 2024
- Published by Springer Nature in Bulletin of Earthquake Engineering
- Vol. 22 (10) , 1-44
Open AccessSeismic site effects in Lisbon: the role of complex geological and morphological conditions
Lisbon’s historical seismicity, socioeconomic importance and population density contribute to a moderate to high seismic risk. The geological setting of the city includes cases of inclined layers, interbedding sedimentary rock layers in soil deposits, sand and clay layers in the same geological unit, leading to cases of shear wave velocity inversion and a large scatter of geotechnical properties within each geological unit. The morphological setting of the city is characterised by the existence of several hills and relatively shallow, stream-carved valleys filled with alluvial deposits. The seismic site effects in Lisbon were assessed through numerical simulation using the linear equivalent method and adopting the two types of seismic action defined in the Portuguese National Annex of Eurocode 8: (i) one-dimensional subsoil models covering the city, at sites where borehole data and geophysical data were available; (ii) two-dimensional subsoil models along three cross-sections representative of the geological settings and morphology. The distribution of amplification factors in the city revealed a pattern related to ground characteristics that impact seismic soil response, such as the presence of high-thickness cover deposits, significant shear-wave variations, alluvial valleys, a crest or significant slope variations and inclined layers. The 2D/1D spectral ratio highlighted the areas were 2D seismic effects are more important. The soil factor determined in the numerical analyses was consistently greater than the soil factor values indicated in Eurocode 8.
- Open Access
- 1 January 2024
- Published by Walter de Gruyter GmbH in Open Geosciences
- Vol. 16 (1)
Numerical modeling of site response at large strains with simplified nonlinear models: Application to Lotung seismic array
Site response analyses at large strains are routinely carried out neglecting the shear strength of soil and the stiffness degradation due to the increase in pore pressures, leading to unrealistic predictions of the seismic response of soil deposits. The study investigates the performance of a simplified nonlinear (NL) approach, implemented in the Deepsoil code, constituted by coupling a hyperbolic model incorporating shear strength with a strain-based semi-empirical pore pressure generation model. The first part of the study, based on a large one-dimensional parametric study, shows that above a shear strain of 0.1%, it is necessary to include shear strength in the site response modelling to get more realistic results. Then, the approach has been evaluated with reference to the well-known downhole Large-Scale Seismic Test array located in Lotung (Taiwan): numerical results have been compared with recordings in terms of acceleration response spectra and pore water pressure time histories at different depths along the soil profiles. The comparison shows that the NL simplified model is characterized by an accuracy comparable with more sophisticated advanced elasto-plastic NL analyses adopting essentially the same input data of the traditional equivalent linear approaches(shear modulus and damping curves) and simple physical-mechanical properties routinely determined during geotechnical surveys (i.e., shear strength, relative density, fine content). This approach is therefore recommended for site response analyses reaching large strains (i.e., soft soil deposits and moderate-to-high input motions).
- 1 January 2024
- Published by Walter de Gruyter GmbH in Open Geosciences
- Vol. 16 (1)
Open AccessNumerical modeling of site response at large strains with simplified nonlinear models: Application to Lotung seismic array
Site response analyses at large strains are routinely carried out neglecting the shear strength of soil and the stiffness degradation due to the increase in pore pressures, leading to unrealistic predictions of the seismic response of soil deposits. The study investigates the performance of a simplified nonlinear (NL) approach, implemented in the Deepsoil code, constituted by coupling a hyperbolic model incorporating shear strength with a strain-based semi-empirical pore pressure generation model. The first part of the study, based on a large one-dimensional parametric study, shows that above a shear strain of 0.1%, it is necessary to include shear strength in the site response modelling to get more realistic results. Then, the approach has been evaluated with reference to the well-known downhole Large-Scale Seismic Test array located in Lotung (Taiwan): numerical results have been compared with recordings in terms of acceleration response spectra and pore water pressure time histories at different depths along the soil profiles. The comparison shows that the NL simplified model is characterized by an accuracy comparable with more sophisticated advanced elasto-plastic NL analyses adopting essentially the same input data of the traditional equivalent linear approaches(shear modulus and damping curves) and simple physical-mechanical properties routinely determined during geotechnical surveys (i.e., shear strength, relative density, fine content). This approach is therefore recommended for site response analyses reaching large strains (i.e., soft soil deposits and moderate-to-high input motions).
- Open Access
- 4 March 2021
- Published by Copernicus GmbH
Effect of stiff-soft alternanting layers in volcanic areas on seismic site response
The seismic subsoil response in terms of amplification or attenuation of the ground motion is the result of a complex combination of factors, including the vertical and horizontal subsoil heterogeneities (Fabozzi et al., 2021). In volcanic areas in particular, the vertical subsoil heterogeneities are well identified by characteristic superposition of stiffer volcanic horizons on softer levels, giving rise to stiff-soft alternating layers, also in the form of multiple Vs inversions with the depth. This condition is typical of sheet-like blankets of lava or pyroclastic deposits, extensively covering the sedimentary substratum, frequent in the peripheral areas of large basaltic stratovolcanos or in areas adjacent to large explosive acidic volcanic edifices. The aim of the present work is to study the effect of such vertical heterogeneities on the seismic site response. With this end, in correspondence of volcanic areas identified by means of a preliminary geological screening in the Italian territory, subsoil properties relevant for seismic site response analyses were extracted from the Italian database of the seismic microzonation studies (DB-SMs in DPC, 2018), which is available at www.webms.it and is developed and maintained by CNR IGAG (National Research Council of Italy, Institute of Environmental Geology and Geoengineering, www.igag.cnr. it). The collection of input data was used for an extensive one-dimensional equivalent linear numerical site response analyses, in order to evaluate the influence of stiffness inversions on ground motion at surface. In particular, different idealized subsoil 1D models of the identified geological areas were defined in terms of variation of layers thickness, shear wave velocity and nonlinear properties. The effect of the variability of these parameters on the seismic site response in terms of amplification factors (ICMS, 2008) was studied parametrically.References DPC, Dipartimento della Protezione Civile, 2018. Commissione tecnica per il supporto e monitoraggio degli studi di Microzonazione Sismica (ex art.5, OPCM3907/10), (2018) WebMs; WebCLE. A cura di: Maria Sole Benigni, Fabrizio Bramerini, Gianluca Carbone, Sergio Castenetto, Gian Paolo Cavinato, Monia Coltella, Margherita Giuffrè, Massimiliano Moscatelli. In: Giuseppe Naso. Andrea Pietrosante, Francesco Stigliano. Fabozzi S., Catalano S., Falcone G., Naso G., Pagliaroli A., Peronace E., Porchia A., Romagnoli G., Moscatelli M. (2021) Stochastic approach to study the site response in presence of shear wave velocity inversion: application to seismic microzonation studies in Italy. Engineering Geology https://doi.org/10.1016/j.enggeo.2020.105914. ICMS, 2008. Indirizzi e Criteri per la Microzonazione Sismica. In: Gruppo di lavoro ICMS. Conferenza Delle Regioni E Province Autonome - Dipartimento Della Protezione Civile. https://www.centromicrozonazionesismica.it/it/download/category/7-indi rizzi-e-criteri-per-lamicrozonazione-sismica (In Italian).
- 4 March 2021
- Published by Copernicus GmbH
Open AccessEffect of stiff-soft alternanting layers in volcanic areas on seismic site response
The seismic subsoil response in terms of amplification or attenuation of the ground motion is the result of a complex combination of factors, including the vertical and horizontal subsoil heterogeneities (Fabozzi et al., 2021). In volcanic areas in particular, the vertical subsoil heterogeneities are well identified by characteristic superposition of stiffer volcanic horizons on softer levels, giving rise to stiff-soft alternating layers, also in the form of multiple Vs inversions with the depth. This condition is typical of sheet-like blankets of lava or pyroclastic deposits, extensively covering the sedimentary substratum, frequent in the peripheral areas of large basaltic stratovolcanos or in areas adjacent to large explosive acidic volcanic edifices. The aim of the present work is to study the effect of such vertical heterogeneities on the seismic site response. With this end, in correspondence of volcanic areas identified by means of a preliminary geological screening in the Italian territory, subsoil properties relevant for seismic site response analyses were extracted from the Italian database of the seismic microzonation studies (DB-SMs in DPC, 2018), which is available at www.webms.it and is developed and maintained by CNR IGAG (National Research Council of Italy, Institute of Environmental Geology and Geoengineering, www.igag.cnr. it). The collection of input data was used for an extensive one-dimensional equivalent linear numerical site response analyses, in order to evaluate the influence of stiffness inversions on ground motion at surface. In particular, different idealized subsoil 1D models of the identified geological areas were defined in terms of variation of layers thickness, shear wave velocity and nonlinear properties. The effect of the variability of these parameters on the seismic site response in terms of amplification factors (ICMS, 2008) was studied parametrically.References DPC, Dipartimento della Protezione Civile, 2018. Commissione tecnica per il supporto e monitoraggio degli studi di Microzonazione Sismica (ex art.5, OPCM3907/10), (2018) WebMs; WebCLE. A cura di: Maria Sole Benigni, Fabrizio Bramerini, Gianluca Carbone, Sergio Castenetto, Gian Paolo Cavinato, Monia Coltella, Margherita Giuffrè, Massimiliano Moscatelli. In: Giuseppe Naso. Andrea Pietrosante, Francesco Stigliano. Fabozzi S., Catalano S., Falcone G., Naso G., Pagliaroli A., Peronace E., Porchia A., Romagnoli G., Moscatelli M. (2021) Stochastic approach to study the site response in presence of shear wave velocity inversion: application to seismic microzonation studies in Italy. Engineering Geology https://doi.org/10.1016/j.enggeo.2020.105914. ICMS, 2008. Indirizzi e Criteri per la Microzonazione Sismica. In: Gruppo di lavoro ICMS. Conferenza Delle Regioni E Province Autonome - Dipartimento Della Protezione Civile. https://www.centromicrozonazionesismica.it/it/download/category/7-indi rizzi-e-criteri-per-lamicrozonazione-sismica (In Italian).
- 1 January 2021
- Published by International Association for Bridge and Structural Engineering (IABSE)
- p. 1312-1319
Earthquake induced floor accelerations on a high-rise building: Scale model tests on a shaking table
The paper discusses results of shaking table tests on an in-scale high-rise building model. The purpose was to calibrate a dynamic numerical model for multi-hazard analyses to investigate the effects of floor acceleration. Accelerations, because of vibration of non-structural elements, affect both the comfort and safety of people. The research investigates the acceleration effects of both seismic and wind forces on an aeroelastic in-scale model of a multi-story building. The paper discusses the first phase of experiments and gives results of floor accelerations induced by several different base seismic impulses. Structural analyses were first performed on the full-scale prototype to take soil-structure interaction into account. Subsequently the scale model was designed through aeroelastic scale laws. Shaking table experiments were then carried out under different base accelerations. The response of the model and, in particular, amplification of effects from base to top are discussed.
- 1 January 2021
- Published by International Association for Bridge and Structural Engineering (IABSE)
- p. 1312-1319
Earthquake induced floor accelerations on a high-rise building: Scale model tests on a shaking table
The paper discusses results of shaking table tests on an in-scale high-rise building model. The purpose was to calibrate a dynamic numerical model for multi-hazard analyses to investigate the effects of floor acceleration. Accelerations, because of vibration of non-structural elements, affect both the comfort and safety of people. The research investigates the acceleration effects of both seismic and wind forces on an aeroelastic in-scale model of a multi-story building. The paper discusses the first phase of experiments and gives results of floor accelerations induced by several different base seismic impulses. Structural analyses were first performed on the full-scale prototype to take soil-structure interaction into account. Subsequently the scale model was designed through aeroelastic scale laws. Shaking table experiments were then carried out under different base accelerations. The response of the model and, in particular, amplification of effects from base to top are discussed.
- 23 June 2019
- Published by Springer Nature
- p. 101-110
Simplified Charts to Evaluate Settlements from Seismic Compression in Dry Loose Sand
- 23 June 2019
- Published by Springer Nature
- p. 101-110
Simplified Charts to Evaluate Settlements from Seismic Compression in Dry Loose Sand
- 15 April 2019
- Published by Springer Nature in Bulletin of Earthquake Engineering
- Vol. 18 (12) , 5741-5777
Site response analyses for complex geological and morphological conditions: relevant case-histories from 3rd level seismic microzonation in Central Italy
- 15 April 2019
- Published by Springer Nature in Bulletin of Earthquake Engineering
- Vol. 18 (12) , 5741-5777
Site response analyses for complex geological and morphological conditions: relevant case-histories from 3rd level seismic microzonation in Central Italy
- Open Access
- 15 February 2019
- Published by American Geophysical Union (AGU) in Tectonics
- Vol. 38 (2) , 595-620
Definition of Seismic Input From Fault‐Based PSHA: Remarks After the 2016 Central Italy Earthquake Sequence
This work focuses on how the progress in earthquake science that follows a large, deeply studied earthquake might be promptly combined with updated approaches of seismic hazard analysis to guide applicative choices for seismic risk reduction, such as postevent seismic microzoning and building design. Both seismic microzoning and seismic design of structures require strong motion records to perform numerical site response analyses. These records have to be related to the seismotectonic context and historical seismicity of the investigation area. We first performed a fault‐based probabilistic seismic hazard analysis in the area struck by the 2016 central Italy seismic sequence to individuate reference uniform hazard spectra at rock conditions. We used two different seismic hazard models, one considering 27 individual seismogenic sources (ISSs), and the second one involving grid point seismicity, using a fixed‐radius smoothing approach. The geological and seismotectonic data of the 2016 seismic sequence were used to update the model of ISSs. We performed a deaggregation analysis to evaluate the contribution of the ISS in the hazard of four representative sites and to select the magnitude‐distance pairs useful in the selection of the real accelerograms. The deaggregation analysis has been performed to identify which source and magnitude most contribute to the hazard for each site, and for different periods of spectral accelerations. Finally, we select, for each site, a set of natural accelerograms, from both nonimpulsive and pulse‐like records, based on the magnitude‐distance pairs that are compatible on average with target uniform hazard spectra.
- 15 February 2019
- Published by American Geophysical Union (AGU) in Tectonics
- Vol. 38 (2) , 595-620
Open AccessDefinition of Seismic Input From Fault‐Based PSHA: Remarks After the 2016 Central Italy Earthquake Sequence
This work focuses on how the progress in earthquake science that follows a large, deeply studied earthquake might be promptly combined with updated approaches of seismic hazard analysis to guide applicative choices for seismic risk reduction, such as postevent seismic microzoning and building design. Both seismic microzoning and seismic design of structures require strong motion records to perform numerical site response analyses. These records have to be related to the seismotectonic context and historical seismicity of the investigation area. We first performed a fault‐based probabilistic seismic hazard analysis in the area struck by the 2016 central Italy seismic sequence to individuate reference uniform hazard spectra at rock conditions. We used two different seismic hazard models, one considering 27 individual seismogenic sources (ISSs), and the second one involving grid point seismicity, using a fixed‐radius smoothing approach. The geological and seismotectonic data of the 2016 seismic sequence were used to update the model of ISSs. We performed a deaggregation analysis to evaluate the contribution of the ISS in the hazard of four representative sites and to select the magnitude‐distance pairs useful in the selection of the real accelerograms. The deaggregation analysis has been performed to identify which source and magnitude most contribute to the hazard for each site, and for different periods of spectral accelerations. Finally, we select, for each site, a set of natural accelerograms, from both nonimpulsive and pulse‐like records, based on the magnitude‐distance pairs that are compatible on average with target uniform hazard spectra.
- 25 September 2014
- Published by WITPRESS LTD.
- p. 11-20
Site effect evaluation in Sellano, Italy, by 1-D and 2-D numerical analyses
Welcome to the WIT Press eLibrary - the home of the Transactions of the Wessex Institute collection, providing on-line access to papers presented at the Institute's prestigious international conferences and from its State-of-the-Art in Science & Engineering publications.
- 25 September 2014
- Published by WITPRESS LTD.
- p. 11-20
Site effect evaluation in Sellano, Italy, by 1-D and 2-D numerical analyses
Welcome to the WIT Press eLibrary - the home of the Transactions of the Wessex Institute collection, providing on-line access to papers presented at the Institute's prestigious international conferences and from its State-of-the-Art in Science & Engineering publications.