PZPeng Zhang

Peng Zhang

*This is an algorithmically generated author record based on publicly available information.

Peng Zhang has a total of 10 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Flexural Toughness of Steel Fiber Reinforced High Performance Concrete Containing Nano-SiO2and Fly Ash

    by Peng Zhang, Ya-Nan Zhao, Qing-Fu Li, Peng Wang, Tian-Hang Zhang

    This paper aims to clarify the effect of steel fiber on the flexural toughness of the high performance concrete containing fly ash and nano-SiO2. The flexural toughness was evaluated by two methods, which are based on ASTM C1018 and DBV-1998, respectively. By means of three-point bending method, the flexural toughness indices, variation coefficients of bearing capacity, deformation energy, and equivalent flexural strength of the specimen were measured, respectively, and the relational curves between the vertical load and the midspan deflection (PV-δ) were obtained. The results indicate that steel fiber has great effect on the flexural toughness parameters and relational curves (PV-δ) of the three-point bending beam specimen. When the content of steel fiber increases from 0.5% to 2%, the flexural toughness parameters increase gradually and the curves are becoming plumper and plumper with the increase of steel fiber content, respectively. However these flexural toughness parameters begin to decrease and the curves become thinner and thinner after the steel fiber content exceeds 2%. It seems that the contribution of steel fiber to the improvement of flexural toughness of the high performance concrete containing fly ash and nano-SiO2is well performed only when the steel fiber content is less than 2%.


  • Open Access

    Combined effect of nano-SiO 2 particles and steel fibers on flexural properties of concrete composite containing fly ash

    by Peng Zhang, Ya-Nan Zhao, Chen-Hui Liu, Peng Wang, Tian-Hang Zhang

    This paper presents an experimental study to evaluate the combined effect of nano-SiO 2 particles and steel fibers on flexural properties of concrete composites containing fly ash. In this study, five different nano-SiO 2 contents (1%, 3%, 5%, 7%, and 9%) and five different steel fiber contents (0.5%, 1%, 1.5%, 2%, and 2.5%) were used. The results indicate that addition of nano-SiO 2 and steel fibers decreases the workability of the concrete composites containing fly ash, and both the slump and slump flow decrease gradually with the increase in nano-SiO 2 and steel fiber content. Besides, the addition of nano-SiO 2 can greatly increase the flexural strength and flexural modulus of elasticity of concrete composites containing fly ash. There is a tendency for the increase in the flexural strength flexural modulus of elasticity with an increase in the nano-SiO 2 content when the nano-SiO 2 content is below 5%, while both of the two flexural parameters begin to decrease after the nano-SiO 2 content above 5%. Furthermore, steel fibers have great improvement on the flexural properties of concrete composites containing fly ash and nano-particles. The flexural strength and flexural modulus of elasticity of concrete composites containing fly ash and nano-SiO 2 are more than those of the concrete composite without steel fibers. Both of the two flexural parameters increase with the increase in steel fiber content when the steel fiber content is below 2%, while the flexural parameters begin to decrease after the steel fiber content is above 2%.


  • Open Access

    Study on Notch Sensitivity of Fracture Properties of Concrete Containing Nano‐SiO2 Particles and Fly Ash

    by Peng Zhang, Qiao-Yan Guan, Chen-Hui Liu, Qing-Fu Li

    The fracture parameters and fracture relational curves of the concrete containing nano‐SiO2 and fly ash with different relative notch depth of the notched beam specimens were measured by means of three‐point bending method. The results indicate that the relative notch depth of the notched specimens has great effect on ac, , , GF, CMODc, and the fracture relational curves of the concrete containing nano‐SiO2 and fly ash. There is a tendency of increase in ac and CMODc with the increase of relative notch depth, while , , and GF are decreasing gradually with the increase of relative notch depth of the notched beam specimens. Besides, when the relative notch depth increases from 0.2 to 0.5, the nonlinear stage of the curve becomes shorter and shorter, and the descent stage of the curve becomes sharper and sharper. The fracture parameters of ac, , , GF, and CMODc and the fracture curves are sensitive to the relative notch depth, while CTODc may be not sensitive to the relative notch depth of the specimens of the concrete containing nano‐SiO2 and fly ash.


  • Application of Grey-Markov model in predicting traffic volume

    by Li Qingfu, Hu Qunfang, Zhang Peng

    Generally, the planning of highway is designed on the basis of the traffic volume prediction. Because the influence factors of the traffic volume prediction are indeterminate, it leads to great discrepancy between the traffic prediction and the actual volume. Grey-markov forecasting model was founded by applying the model of GM (1,1) and Markov random process theory. The model utilizes the advantages of Grey-markov GM (1,1) forecasting model and Markov random process in order to discover the developing and varying tendency of the forecasting data sequences. When Markov random process is being used to decide the transfer rule of the state, it can not only make full use of the information of the historical data, but also improve the forecasting accuracy of random series. So it develops the applying range of grey forecasting and presents a new method of data sequences with large random. The analysis of an example indicates that the grey-markov model has good forecasting accuracy and excellent applicability.