Masataku Sutoh
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Masataku Sutoh has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- Daichi Hirano
Research and Development Directorate, Japan Aerospace Exploration Agency, Tsukuba, Japan
2 shared publications - Gen Sakoda
Department of Mathematical and Computing Sciences, School of Computing, Tokyo Institute of Technology, 4259 Nagatsuta-cho, Midori-ku, Yokohama 226-8502, Japan
2 shared publications - Genya Ishigami
Keio University, Yokohama, Japan
2 shared publications H. Kojima
Keio University, Yokohama, Japan
2 shared publicationsH. Miyamoto
The University of Tokyo, Tokyo, Japan
2 shared publications- Hirotaka Sawada
Institute of Space and Astronautical Science, Japan Aerospace Exploration Agency (JAXA), Sagamihara 252-5210, Japan
2 shared publications
Latest Publications
- 10 June 2026
- Published by American Association for the Advancement of Science (AAAS) in Science Robotics
- Vol. 11 (115) , eaec8039
From ball to rover: Transformable palm-sized rover SORA-Q for autonomous lunar exploration
Robotic technologies are expected to drive substantial advancements in planetary exploration and resource prospecting by performing a variety of tasks in extraterrestrial environments. In particular, miniature robots are ideally suited for integration into spacecraft with strict payload limitations, providing a cost-effective solution. However, the pursuit of autonomous exploration using these miniature robots presents challenges owing to constraints in computational power and battery capacity and reduced locomotion performance owing to their small size. Here, we introduce a two-wheeled centimeter-scale rover, designated Lunar Excursion Vehicle 2 (LEV-2), also known as SORA-Q (named after the Japanese words for space and sphere), which transforms into a wheeled configuration from a compact spherical form, enabling efficient traversal of soft lunar terrains. On 19 January 2024 (universal time coordinated), LEV-2 was deployed from a Japanese lunar lander, Smart Lander for Investigating Moon (SLIM), immediately before its landing on the lunar surface. After a lunar landing, the palm-sized rover accomplished autonomous lunar exploration by navigating around the SLIM lander, capturing images of both the SLIM lander and its environment and transmitting selected images through wireless communication on the lunar surface without reliance on ground-based teleoperation. This study details the system design of LEV-2 and presents the results of its in situ lunar activities, highlighting the efficacy of the proposed technologies necessary for mission implementation. Furthermore, we discuss the technical challenges encountered during the mission, including operational constraints and partial data loss, as well as the lessons learned for future exploration missions using small-scale space robots.
- 10 June 2026
- Published by American Association for the Advancement of Science (AAAS) in Science Robotics
- Vol. 11 (115) , eaec8039
From ball to rover: Transformable palm-sized rover SORA-Q for autonomous lunar exploration
Robotic technologies are expected to drive substantial advancements in planetary exploration and resource prospecting by performing a variety of tasks in extraterrestrial environments. In particular, miniature robots are ideally suited for integration into spacecraft with strict payload limitations, providing a cost-effective solution. However, the pursuit of autonomous exploration using these miniature robots presents challenges owing to constraints in computational power and battery capacity and reduced locomotion performance owing to their small size. Here, we introduce a two-wheeled centimeter-scale rover, designated Lunar Excursion Vehicle 2 (LEV-2), also known as SORA-Q (named after the Japanese words for space and sphere), which transforms into a wheeled configuration from a compact spherical form, enabling efficient traversal of soft lunar terrains. On 19 January 2024 (universal time coordinated), LEV-2 was deployed from a Japanese lunar lander, Smart Lander for Investigating Moon (SLIM), immediately before its landing on the lunar surface. After a lunar landing, the palm-sized rover accomplished autonomous lunar exploration by navigating around the SLIM lander, capturing images of both the SLIM lander and its environment and transmitting selected images through wireless communication on the lunar surface without reliance on ground-based teleoperation. This study details the system design of LEV-2 and presents the results of its in situ lunar activities, highlighting the efficacy of the proposed technologies necessary for mission implementation. Furthermore, we discuss the technical challenges encountered during the mission, including operational constraints and partial data loss, as well as the lessons learned for future exploration missions using small-scale space robots.
- Open Access
- 20 April 2024
- Published by Fuji Technology Press Ltd. in Journal of Robotics and Mechatronics
- Vol. 36 (2) , 334-342
Development and Evaluation of Mobility and Excavation Rover Toward Lunar Base Construction
Title: Development and Evaluation of Mobility and Excavation Rover Toward Lunar Base Construction | Keywords: lunar base, construction, rover, mobility, excavation | Author: Masataku Sutoh
- 20 April 2024
- Published by Fuji Technology Press Ltd. in Journal of Robotics and Mechatronics
- Vol. 36 (2) , 334-342
Open AccessDevelopment and Evaluation of Mobility and Excavation Rover Toward Lunar Base Construction
Title: Development and Evaluation of Mobility and Excavation Rover Toward Lunar Base Construction | Keywords: lunar base, construction, rover, mobility, excavation | Author: Masataku Sutoh
- 7 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 9 (4) , 3139-3146
Transformable Nano Rover for Space Exploration
This letter introduces a novel nano rover designed to transform its shape for efficient movement on lunar surfaces. The rover, resembling a compact ball, has a diameter of roughly 80 mm and a mass around 250 g. Its transformational mechanism allows for compactness during planetary transportation, with enhanced mobility achieved through the use of extendable wheels, a tail stabilizer, and cameras. To traverse soft terrains efficiently, the rover utilizes an eccentric wheel mechanism, offering two distinct movement modes based on wheel synchronization. This mechanism provides a locomotion velocity of 20 mm/s or more on a flat surface. Moreover, it features onboard image processing to detect spacecraft shielded by Multi-Layer Insulation (MLI) films, facilitating autonomous control and selective image transmission. This rover has been deployed in a real space mission, having been mounted on a lunar lander. This letter presents the design specifics of this transformable rover and results from field tests simulating lunar conditions. These tests affirmed the efficacy of the proposed motion mechanism and onboard image processing.
- 7 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 9 (4) , 3139-3146
Transformable Nano Rover for Space Exploration
This letter introduces a novel nano rover designed to transform its shape for efficient movement on lunar surfaces. The rover, resembling a compact ball, has a diameter of roughly 80 mm and a mass around 250 g. Its transformational mechanism allows for compactness during planetary transportation, with enhanced mobility achieved through the use of extendable wheels, a tail stabilizer, and cameras. To traverse soft terrains efficiently, the rover utilizes an eccentric wheel mechanism, offering two distinct movement modes based on wheel synchronization. This mechanism provides a locomotion velocity of 20 mm/s or more on a flat surface. Moreover, it features onboard image processing to detect spacecraft shielded by Multi-Layer Insulation (MLI) films, facilitating autonomous control and selective image transmission. This rover has been deployed in a real space mission, having been mounted on a lunar lander. This letter presents the design specifics of this transformable rover and results from field tests simulating lunar conditions. These tests affirmed the efficacy of the proposed motion mechanism and onboard image processing.
- Open Access
- 22 September 2023
- Published by Springer Nature in npj Microgravity
- Vol. 9 (1) , 1
Publisher Correction: Granular flow experiment using artificial gravity generator at International Space Station
- 22 September 2023
- Published by Springer Nature in npj Microgravity
- Vol. 9 (1) , 1
Open AccessPublisher Correction: Granular flow experiment using artificial gravity generator at International Space Station
- Open Access
- 8 August 2023
- Published by Springer Nature in npj Microgravity
- Vol. 9 (1) , 1-13
Granular flow experiment using artificial gravity generator at International Space Station
Studying the gravity-dependent characteristics of regolith, fine-grained granular media covering extra-terrestrial bodies is essential for the reliable design and analysis of landers and rovers for space exploration. In this study, we propose an experimental approach to examine a granular flow under stable artificial gravity conditions for a long duration generated by a centrifuge at the International Space Station. We also perform a discrete element simulation of the granular flow in both artificial and natural gravity environments. The simulation results verify that the granular flows in artificial and natural gravity are consistent. Further, regression analysis of the experimental results reveals that the mass flow rate of granular flow quantitatively follows a well-known physics-based law with some deviations under low-gravity conditions, implying that the bulk density of the granular media decreases with gravity. This insight also indicates that the bulk density considered in simulation studies of space probes under low-gravity conditions needs to be tuned for their reliable design and analysis.
- 8 August 2023
- Published by Springer Nature in npj Microgravity
- Vol. 9 (1) , 1-13
Open AccessGranular flow experiment using artificial gravity generator at International Space Station
Studying the gravity-dependent characteristics of regolith, fine-grained granular media covering extra-terrestrial bodies is essential for the reliable design and analysis of landers and rovers for space exploration. In this study, we propose an experimental approach to examine a granular flow under stable artificial gravity conditions for a long duration generated by a centrifuge at the International Space Station. We also perform a discrete element simulation of the granular flow in both artificial and natural gravity environments. The simulation results verify that the granular flows in artificial and natural gravity are consistent. Further, regression analysis of the experimental results reveals that the mass flow rate of granular flow quantitatively follows a well-known physics-based law with some deviations under low-gravity conditions, implying that the bulk density of the granular media decreases with gravity. This insight also indicates that the bulk density considered in simulation studies of space probes under low-gravity conditions needs to be tuned for their reliable design and analysis.
- Open Access
- 1 January 2019
- Published by Japan Society of Mechanical Engineers in Transactions of the JSME (in Japanese)
- Vol. 85 (878) , 19-00154
Super-fiber tracked robot VAMOS (Development and experimental evaluation of super-fiber track)
In this study, we develop a new track having a belt made of a fiber and experimentally evaluate its traveling performance. The developed track has a belt made of a high strength and high modulus super fiber. In this track, the tension of the belt is adjustable and the misalignment of the belt along the track travel can be prevented. To evaluate the traveling performance of this fiber track, we conducted two types of experiments in a sandbox covered with loose silica. Traveling tests were first conducted using a single-track traveling test system. In the tests, tracks, which had belts made of various materials and different structures, traveled while pulling various traction loads, and the relationship between drawbar pull and slip ratio of each track were measured. From the experiments, it was shown that the track made of a para-aramid mesh had a high traveling performance. Subsequently, a mobile robot named VAMOS, which is equipped with four tracks made of the para-aramid mesh, was developed. Traction tests were conducted using VAMOS in the sandbox. In the tests, VAMOS traveled on a loose ground while pulling various traction loads. From the traveling tests using the VAMOS, it was quantitatively confirmed that the developed track had high traveling performance on a mobile robot.
- 1 January 2019
- Published by Japan Society of Mechanical Engineers in Transactions of the JSME (in Japanese)
- Vol. 85 (878) , 19-00154
Open AccessSuper-fiber tracked robot VAMOS (Development and experimental evaluation of super-fiber track)
In this study, we develop a new track having a belt made of a fiber and experimentally evaluate its traveling performance. The developed track has a belt made of a high strength and high modulus super fiber. In this track, the tension of the belt is adjustable and the misalignment of the belt along the track travel can be prevented. To evaluate the traveling performance of this fiber track, we conducted two types of experiments in a sandbox covered with loose silica. Traveling tests were first conducted using a single-track traveling test system. In the tests, tracks, which had belts made of various materials and different structures, traveled while pulling various traction loads, and the relationship between drawbar pull and slip ratio of each track were measured. From the experiments, it was shown that the track made of a para-aramid mesh had a high traveling performance. Subsequently, a mobile robot named VAMOS, which is equipped with four tracks made of the para-aramid mesh, was developed. Traction tests were conducted using VAMOS in the sandbox. In the tests, VAMOS traveled on a loose ground while pulling various traction loads. From the traveling tests using the VAMOS, it was quantitatively confirmed that the developed track had high traveling performance on a mobile robot.
- 31 July 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 3 (4) , 4031-4037
Motion Modeling and Localization of Skid-Steering Wheeled Rover on Loose Terrain
The motion behavior of a skid-steering rover on loose terrain is modeled experimentally, and a position estimation method based on the model is proposed. Skid steering is a steering method adopted for various vehicles and robots. In this method, the vehicles steer by controlling a ratio between the rotational velocities of their left and right wheels. For controlling a skid-steering rover, whose wheels can slip on the lunar and planetary surfaces, which are covered with loose regolith, it is important to model accurately the rover's motion behaviors on loose terrain. To this end, we conducted traveling tests using a four-wheeled rover in a sand field and analyzed the motion behaviors of the rover on loose terrain. In the tests, the velocities of the rover's left and right wheels were controlled, and the rover traveled with various turning patterns. From the test datasets, we derived a mathematical model that expresses a relationship between the input and output velocities of the rover's wheels. Furthermore, the effectiveness of a position and motion estimation method based on the model was confirmed from experiments conducted in the sand field.
- 31 July 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 3 (4) , 4031-4037
Motion Modeling and Localization of Skid-Steering Wheeled Rover on Loose Terrain
The motion behavior of a skid-steering rover on loose terrain is modeled experimentally, and a position estimation method based on the model is proposed. Skid steering is a steering method adopted for various vehicles and robots. In this method, the vehicles steer by controlling a ratio between the rotational velocities of their left and right wheels. For controlling a skid-steering rover, whose wheels can slip on the lunar and planetary surfaces, which are covered with loose regolith, it is important to model accurately the rover's motion behaviors on loose terrain. To this end, we conducted traveling tests using a four-wheeled rover in a sand field and analyzed the motion behaviors of the rover on loose terrain. In the tests, the velocities of the rover's left and right wheels were controlled, and the rover traveled with various turning patterns. From the test datasets, we derived a mathematical model that expresses a relationship between the input and output velocities of the rover's wheels. Furthermore, the effectiveness of a position and motion estimation method based on the model was confirmed from experiments conducted in the sand field.
- 1 January 2018
- Published by Japan Society of Mechanical Engineers in The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec)
- Vol. 2018, 2A2-B09
Position Estimation for Wheeled Rover Considering its Slip Characteristics on Loose Terrain
In this study, motion behaviors of a skid-steering wheeled rover are experimentally modeled on loose terrain and a position estimation method for the rover is proposed based on the model. For this purpose, a four-wheeled rover named ALPS was first developed. Subsequently, traveling tests were conducted using the rover on a sandbox. In the tests, the rover traveled with various turning radii by controlling a ratio between the rotational speeds of its left and right wheels (i.e., skid-steering). An equation that expresses the output speeds of the rover's wheels was derived using the test data. In addition, the effectiveness of the position estimation method based on the model was confirmed from the traveling tests.
- 1 January 2018
- Published by Japan Society of Mechanical Engineers in The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec)
- Vol. 2018, 2A2-B09
Position Estimation for Wheeled Rover Considering its Slip Characteristics on Loose Terrain
In this study, motion behaviors of a skid-steering wheeled rover are experimentally modeled on loose terrain and a position estimation method for the rover is proposed based on the model. For this purpose, a four-wheeled rover named ALPS was first developed. Subsequently, traveling tests were conducted using the rover on a sandbox. In the tests, the rover traveled with various turning radii by controlling a ratio between the rotational speeds of its left and right wheels (i.e., skid-steering). An equation that expresses the output speeds of the rover's wheels was derived using the test data. In addition, the effectiveness of the position estimation method based on the model was confirmed from the traveling tests.
- 1 September 2017
- Published by Elsevier in Acta Astronautica
- Vol. 138, 454-461
Rover deployment system for lunar landing mission
- 1 September 2017
- Published by Elsevier in Acta Astronautica
- Vol. 138, 454-461
Rover deployment system for lunar landing mission
- 12 September 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 2 (1) , 313-320
Motion Behaviors of Landing Gear for Lunar Probes in Atmosphere and Vacuum Tests
In this paper, we investigate and model the motion behaviors in the atmosphere and vacuum of the landing gear of a lunar probe, which contacts the granular material covering the lunar surface. Drop and friction tests were conducted using the footpads of a lander on a lunar regolith simulant. In the drop tests, the footpads were dropped onto the simulant. The impact characteristics of the footpads were then analyzed. In the friction tests, footpads having varying shapes were slid onto the simulant. The sliding characteristics of the footpads were then evaluated. The drop tests showed that the simulant ejected by the footpad impact diminished, and the footpad penetration significantly decreased in the vacuum. The friction tests confirmed that the sinkage caused by the sliding of the footpad generally increased more in the vacuum than in the atmosphere. However, the difference in the sinkages can be negligible depending on the footpad shape. These findings enabled the deriving of fundamental models of landing gear and suggested guidelines for the design and development of landing gear.
- 12 September 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 2 (1) , 313-320
Motion Behaviors of Landing Gear for Lunar Probes in Atmosphere and Vacuum Tests
In this paper, we investigate and model the motion behaviors in the atmosphere and vacuum of the landing gear of a lunar probe, which contacts the granular material covering the lunar surface. Drop and friction tests were conducted using the footpads of a lander on a lunar regolith simulant. In the drop tests, the footpads were dropped onto the simulant. The impact characteristics of the footpads were then analyzed. In the friction tests, footpads having varying shapes were slid onto the simulant. The sliding characteristics of the footpads were then evaluated. The drop tests showed that the simulant ejected by the footpad impact diminished, and the footpad penetration significantly decreased in the vacuum. The friction tests confirmed that the sinkage caused by the sliding of the footpad generally increased more in the vacuum than in the atmosphere. However, the difference in the sinkages can be negligible depending on the footpad shape. These findings enabled the deriving of fundamental models of landing gear and suggested guidelines for the design and development of landing gear.