Pierre-Marie Coulon
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Pierre-Marie Coulon has a total of 121 co-authors. Here are the top co-authors by number of shared publications:
- Philip A. Shields
Department of Electronic and Electrical Engineering, University of Bath, Bath BA2 7AY, UK
8 shared publications - Robert W. Martin
Department of Physics, SUPA, University of Strathclyde, Glasgow, G4 0NG, UK
6 shared publications - Gunnar Kusch
University of Cambridge
5 shared publications Benjamin Damilano
Université Côte d’Azur, CNRS, CRHEA, Valbonne, France
4 shared publicationsPierre Chausse
Department of Electronic & Electrical Engineering University of Bath Bath BA2 7AY UK
4 shared publicationsBlandine Alloing
Université Côte d’Azur, CNRS, CRHEA, Valbonne, France
3 shared publications
Latest Publications
- Open Access
- 25 September 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1) , 29908
Mechanical decoupling epitaxy via compliant microdisks yields relaxed transferable AlGaN across broad compositions
Achieving high-quality, crack-free AlGaN layers across a wide aluminum composition range is critical for ultraviolet optoelectronics but remains challenging due to strain-induced defects from lattice and thermal mismatches. Here we present a mechanical decoupling epitaxy approach wherein compliant Al 0.15 Ga 0.85 N microdisks supported by GaN pillars accommodate strain during subsequent regrowth, enabling fully relaxed, crack-free Al x Ga 1−x N up to 82% Al and threading dislocation densities comparable to the initial GaN template (~ 2–5 × 10 8 cm −2 ). Plastic relaxation via misfit dislocations is confined to the supporting GaN pillars, allowing elastic deformation of the microdisk and preserving the structural quality of the overlayer. The resulting AlGaN micropallets support UVB emission from multiple quantum wells and can be mechanically transferred onto arbitrary substrates without degradation. This strategy decouples strain relaxation from substrate constraints, offering a versatile pathway toward high-quality AlGaN templates and advancing efficient UV micro-optoelectronic device development.
- 25 September 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1) , 29908
Open AccessMechanical decoupling epitaxy via compliant microdisks yields relaxed transferable AlGaN across broad compositions
Achieving high-quality, crack-free AlGaN layers across a wide aluminum composition range is critical for ultraviolet optoelectronics but remains challenging due to strain-induced defects from lattice and thermal mismatches. Here we present a mechanical decoupling epitaxy approach wherein compliant Al 0.15 Ga 0.85 N microdisks supported by GaN pillars accommodate strain during subsequent regrowth, enabling fully relaxed, crack-free Al x Ga 1−x N up to 82% Al and threading dislocation densities comparable to the initial GaN template (~ 2–5 × 10 8 cm −2 ). Plastic relaxation via misfit dislocations is confined to the supporting GaN pillars, allowing elastic deformation of the microdisk and preserving the structural quality of the overlayer. The resulting AlGaN micropallets support UVB emission from multiple quantum wells and can be mechanically transferred onto arbitrary substrates without degradation. This strategy decouples strain relaxation from substrate constraints, offering a versatile pathway toward high-quality AlGaN templates and advancing efficient UV micro-optoelectronic device development.
- 31 March 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Croissance et caractérisation de nanofils/microfils de GaN
Ce travail de thèse ce focalise sur la croissance et la caractérisation de Nanofils (NFs) et de Microfils (µFs) de GaN. L'élaboration de telles structures est obtenue par épitaxie en phase vapeur d'organométalliques à partir de deux stratégies de croissances: l'une dite auto-organisée, réalisée sur substrat saphir, l'autre appelée sélective ou localisée, obtenue sur template GaN de polarité Ga. Quelque soit la stratégie employée, nous montrons que la croissance de structures verticales suivant l'axe c requièrent l'utilisation d'un flux de NH3 et d'un rapport V/III faible, lorsque nous les comparons avec les valeurs utilisées pour la réalisation de couches planaires de GaN. Les paramètres et les étapes de croissances ayant une influence sur le rapport d'aspect (hauteur/diamètre) sont étudiées et mises en évidence pour chacune des stratégies employées. Par ailleurs, les mécanismes de croissance ainsi que les propriétés structurales et optiques de ces objets sont caractérisés par MEB, MET, CL et µPL. En particulier, les expériences réalisées sur les µFs auto-organisés permettent d'observer et d'expliquer l'origine de la double polarité, de mettre en lueur la différence d'incorporation de dopants/d'impuretés entre les domaines Ga et N, d'identifier la présence de deux sections de propriétés électriques et optiques différentes, et de révéler la présence de deux types de résonances optiques: des Modes de galerie et des Modes de Fabry-Perot. D'autres part, nous étudions la courbure des dislocations vers les surfaces libres des NFs localisés et µFs auto-organisés, et pointons la présence de fautes d'empilement basales dans des régions de faibles dimensions.
- 31 March 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Croissance et caractérisation de nanofils/microfils de GaN
Ce travail de thèse ce focalise sur la croissance et la caractérisation de Nanofils (NFs) et de Microfils (µFs) de GaN. L'élaboration de telles structures est obtenue par épitaxie en phase vapeur d'organométalliques à partir de deux stratégies de croissances: l'une dite auto-organisée, réalisée sur substrat saphir, l'autre appelée sélective ou localisée, obtenue sur template GaN de polarité Ga. Quelque soit la stratégie employée, nous montrons que la croissance de structures verticales suivant l'axe c requièrent l'utilisation d'un flux de NH3 et d'un rapport V/III faible, lorsque nous les comparons avec les valeurs utilisées pour la réalisation de couches planaires de GaN. Les paramètres et les étapes de croissances ayant une influence sur le rapport d'aspect (hauteur/diamètre) sont étudiées et mises en évidence pour chacune des stratégies employées. Par ailleurs, les mécanismes de croissance ainsi que les propriétés structurales et optiques de ces objets sont caractérisés par MEB, MET, CL et µPL. En particulier, les expériences réalisées sur les µFs auto-organisés permettent d'observer et d'expliquer l'origine de la double polarité, de mettre en lueur la différence d'incorporation de dopants/d'impuretés entre les domaines Ga et N, d'identifier la présence de deux sections de propriétés électriques et optiques différentes, et de révéler la présence de deux types de résonances optiques: des Modes de galerie et des Modes de Fabry-Perot. D'autres part, nous étudions la courbure des dislocations vers les surfaces libres des NFs localisés et µFs auto-organisés, et pointons la présence de fautes d'empilement basales dans des régions de faibles dimensions.
- Open Access
- 25 March 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 139 (12)
Nature of the SiGaN antisurfactant layer enabling MOVPE growth of GaN nanowires
Over the past decade, the growth of nanowires via metalorganic vapor phase epitaxy has commonly employed silicon incorporation in high concentration in the gas phase to produce long nanowires (>10 μm) with high aspect ratios (>100). This effect is primarily attributed to the formation of a thin Si-rich antisurfactant layer on the {1−100} sidewalls during growth, which suppresses lateral expansion while facilitating species diffusion along the nanowire's lateral facets. Despite general agreement on the critical role of this antisurfactant layer, its exact structure and composition remain largely uncharacterized, with few, often contradictory, proposals in the literature. In this work, we investigate the layer structure and composition using transmission electron microscopy and complement our findings with density functional theory calculations. Our results confirm that the layer is fully crystalline and operates as an antisurfactant on m-plane GaN, highlighting the importance of Si in the growth of GaN nanowires. Additionally, we demonstrate that once this antisurfactant layer has been used to grow long nanowires, ex situ chemical etching of this layer enables high-quality growth of a shell, which is otherwise hindered by the antisurfactant nature of the SiGaN layer.
- 25 March 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 139 (12)
Open AccessNature of the SiGaN antisurfactant layer enabling MOVPE growth of GaN nanowires
Over the past decade, the growth of nanowires via metalorganic vapor phase epitaxy has commonly employed silicon incorporation in high concentration in the gas phase to produce long nanowires (>10 μm) with high aspect ratios (>100). This effect is primarily attributed to the formation of a thin Si-rich antisurfactant layer on the {1−100} sidewalls during growth, which suppresses lateral expansion while facilitating species diffusion along the nanowire's lateral facets. Despite general agreement on the critical role of this antisurfactant layer, its exact structure and composition remain largely uncharacterized, with few, often contradictory, proposals in the literature. In this work, we investigate the layer structure and composition using transmission electron microscopy and complement our findings with density functional theory calculations. Our results confirm that the layer is fully crystalline and operates as an antisurfactant on m-plane GaN, highlighting the importance of Si in the growth of GaN nanowires. Additionally, we demonstrate that once this antisurfactant layer has been used to grow long nanowires, ex situ chemical etching of this layer enables high-quality growth of a shell, which is otherwise hindered by the antisurfactant nature of the SiGaN layer.
- Open Access
- 11 March 2026
- Published by Springer Nature in Research Square
Mechanical decoupling epitaxy via compliant microdisks yields relaxed transferable AlGaN across broad compositions
Achieving high-quality, crack-free AlGaN layers across a wide aluminum composition range is critical for ultraviolet optoelectronics but remains challenging due to strain-induced defects from lattice and thermal mismatches. Here we present a mechanical decoupling epitaxy approach wherein compliant Al0.15Ga0.85N microdisks supported by GaN pillars accommodate strain during subsequent regrowth, enabling fully relaxed, crack-free AlxGa1-xN up to 82% Al and threading dislocation densities comparable to the initial GaN template (~2-5 × 10⁸ cm⁻²). Plastic relaxation via misfit dislocations is confined to the supporting GaN pillars, allowing elastic deformation of the microdisk and preserving the structural quality of the overlayer. The resulting AlGaN micropallets support UVB emission from multiple quantum wells and can be mechanically transferred onto arbitrary substrates without degradation. This strategy decouples strain relaxation from substrate constraints, offering a versatile pathway toward high-quality AlGaN templates and advancing efficient UV micro-optoelectronic device development.
- 11 March 2026
- Published by Springer Nature in Research Square
Open AccessMechanical decoupling epitaxy via compliant microdisks yields relaxed transferable AlGaN across broad compositions
Achieving high-quality, crack-free AlGaN layers across a wide aluminum composition range is critical for ultraviolet optoelectronics but remains challenging due to strain-induced defects from lattice and thermal mismatches. Here we present a mechanical decoupling epitaxy approach wherein compliant Al0.15Ga0.85N microdisks supported by GaN pillars accommodate strain during subsequent regrowth, enabling fully relaxed, crack-free AlxGa1-xN up to 82% Al and threading dislocation densities comparable to the initial GaN template (~2-5 × 10⁸ cm⁻²). Plastic relaxation via misfit dislocations is confined to the supporting GaN pillars, allowing elastic deformation of the microdisk and preserving the structural quality of the overlayer. The resulting AlGaN micropallets support UVB emission from multiple quantum wells and can be mechanically transferred onto arbitrary substrates without degradation. This strategy decouples strain relaxation from substrate constraints, offering a versatile pathway toward high-quality AlGaN templates and advancing efficient UV micro-optoelectronic device development.
- Open Access
- 11 December 2024
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 136 (22)
Demonstration of grain reorientation during GaN early stage coalescence grown by novel pendeo-epitaxy approach
In this work, we demonstrate that initially misoriented gallium nitride (GaN) crystalline grains grown on top of GaN/AlN/Si/SiO2 nano-pillars, and which have nucleated independently, realign themselves upon coalescence to form high crystalline quality GaN platelets. Electron backscatter diffraction (EBSD) combined with cathodoluminescence (CL) and scanning x-ray diffraction microscopy (SXDM) provided complementary information on the structural properties of GaN before and during the initial coalescence growth phase. SXDM measurements on GaN coalescing at an early growth stage and on GaN pillars only (prior to growth) confirmed that the initially misoriented GaN pillars coalesce into larger well-defined GaN domains (3.9 μm) very well oriented by themselves, with a spatially varying broadening of the diffraction peak that is maximum at the boundaries between neighboring domains, as identified in the spatially resolved orientation maps. The presence of geometrically necessary dislocations (GNDs) at the domain boundaries detected in the EBSD is confirmed by CL images and the estimated GND density is 2 × 1011 cm−2 in these specific zones. Additionally, statistical analysis of SXDM maps indicated that 0.1° of tilt between neighboring pillars constitutes the limit for the current pendeo-epitaxy growth approach for the formation of pillar groups similar in size to the perfectly aligned GaN domains upon coalescence. This work illustrates the potential of this growth strategy to produce high crystalline quality GaN platelets adapted for micro-LEDs growth, and, most importantly, it provides a microscopic insight into the coalescence process, which could be extended to other materials and growth approaches.
- 11 December 2024
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 136 (22)
Open AccessDemonstration of grain reorientation during GaN early stage coalescence grown by novel pendeo-epitaxy approach
In this work, we demonstrate that initially misoriented gallium nitride (GaN) crystalline grains grown on top of GaN/AlN/Si/SiO2 nano-pillars, and which have nucleated independently, realign themselves upon coalescence to form high crystalline quality GaN platelets. Electron backscatter diffraction (EBSD) combined with cathodoluminescence (CL) and scanning x-ray diffraction microscopy (SXDM) provided complementary information on the structural properties of GaN before and during the initial coalescence growth phase. SXDM measurements on GaN coalescing at an early growth stage and on GaN pillars only (prior to growth) confirmed that the initially misoriented GaN pillars coalesce into larger well-defined GaN domains (3.9 μm) very well oriented by themselves, with a spatially varying broadening of the diffraction peak that is maximum at the boundaries between neighboring domains, as identified in the spatially resolved orientation maps. The presence of geometrically necessary dislocations (GNDs) at the domain boundaries detected in the EBSD is confirmed by CL images and the estimated GND density is 2 × 1011 cm−2 in these specific zones. Additionally, statistical analysis of SXDM maps indicated that 0.1° of tilt between neighboring pillars constitutes the limit for the current pendeo-epitaxy growth approach for the formation of pillar groups similar in size to the perfectly aligned GaN domains upon coalescence. This work illustrates the potential of this growth strategy to produce high crystalline quality GaN platelets adapted for micro-LEDs growth, and, most importantly, it provides a microscopic insight into the coalescence process, which could be extended to other materials and growth approaches.
- Open Access
- 23 June 2023
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 133 (24)
High quality GaN microplatelets grown by metal-organic vapor phase epitaxy on patterned silicon-on-insulator substrates: Toward micro light-emitting diodes
In this paper, we report the use of three pendeo-epitaxy growth approaches as a way of reducing the threading dislocation density (TDD) of 20 × 20 μm2 GaN platelets to be used for the development of micro light-emitting diodes (μLEDs). The method relies on the coalescence of GaN crystallites grown on top of a network of deformable pillars etched into a silicon-on-insulator substrate. Our approach takes advantage of the creeping properties of SiO2 at the usual GaN epitaxial growth temperature, allowing the GaN crystallites to align and reduce the grain boundary dislocations. Furthermore, this bottom-up approach allows to get rid of the dry plasma etching step for μLEDs fabrication, which highly deteriorates sidewalls, reducing the efficiency of future displays. By optimizing the growth conditions and inducing asymmetric nucleation, a TDD of 2.5 × 108 cm−2 has been achieved on the GaN platelets, while keeping a smooth surface.
- 23 June 2023
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 133 (24)
Open AccessHigh quality GaN microplatelets grown by metal-organic vapor phase epitaxy on patterned silicon-on-insulator substrates: Toward micro light-emitting diodes
In this paper, we report the use of three pendeo-epitaxy growth approaches as a way of reducing the threading dislocation density (TDD) of 20 × 20 μm2 GaN platelets to be used for the development of micro light-emitting diodes (μLEDs). The method relies on the coalescence of GaN crystallites grown on top of a network of deformable pillars etched into a silicon-on-insulator substrate. Our approach takes advantage of the creeping properties of SiO2 at the usual GaN epitaxial growth temperature, allowing the GaN crystallites to align and reduce the grain boundary dislocations. Furthermore, this bottom-up approach allows to get rid of the dry plasma etching step for μLEDs fabrication, which highly deteriorates sidewalls, reducing the efficiency of future displays. By optimizing the growth conditions and inducing asymmetric nucleation, a TDD of 2.5 × 108 cm−2 has been achieved on the GaN platelets, while keeping a smooth surface.
- Open Access
Metasurface-enhanced Light Detection and Ranging Technology
Deploying advanced imaging solutions to robotic and autonomous systems by mimicking human vision requires simultaneous acquisition of multiple fields of views, named the peripheral and fovea regions. Low-resolution peripheral field provides coarse scene exploration to direct the eye to focus to a highly resolved fovea region for sharp imaging. Among 3D computer vision techniques, Light Detection and Ranging (LiDAR) is currently considered at the industrial level for robotic vision. LiDAR is an imaging technique that monitors pulses of light at optical frequencies to sense the space and to recover three-dimensional ranging information. Notwithstanding the efforts on LiDAR integration and optimization, commercially available devices have slow frame rate and low image resolution, notably limited by the performance of mechanical or slow solid-state deflection systems. Metasurfaces (MS) are versatile optical components that can distribute the optical power in desired regions of space. Here, we report on an advanced LiDAR technology that uses ultrafast low FoV deflectors cascaded with large area metasurfaces to achieve large FoV and simultaneous peripheral and central imaging zones. This technology achieves MHz frame rate for 2D imaging, and up to KHz for 3D imaging, with extremely large FoV (up to 150{\deg}deg. on both vertical and horizontal scanning axes). The use of this disruptive LiDAR technology with advanced learning algorithms offers perspectives to improve further the perception capabilities and decision-making process of autonomous vehicles and robotic systems.
Open AccessMetasurface-enhanced Light Detection and Ranging Technology
Deploying advanced imaging solutions to robotic and autonomous systems by mimicking human vision requires simultaneous acquisition of multiple fields of views, named the peripheral and fovea regions. Low-resolution peripheral field provides coarse scene exploration to direct the eye to focus to a highly resolved fovea region for sharp imaging. Among 3D computer vision techniques, Light Detection and Ranging (LiDAR) is currently considered at the industrial level for robotic vision. LiDAR is an imaging technique that monitors pulses of light at optical frequencies to sense the space and to recover three-dimensional ranging information. Notwithstanding the efforts on LiDAR integration and optimization, commercially available devices have slow frame rate and low image resolution, notably limited by the performance of mechanical or slow solid-state deflection systems. Metasurfaces (MS) are versatile optical components that can distribute the optical power in desired regions of space. Here, we report on an advanced LiDAR technology that uses ultrafast low FoV deflectors cascaded with large area metasurfaces to achieve large FoV and simultaneous peripheral and central imaging zones. This technology achieves MHz frame rate for 2D imaging, and up to KHz for 3D imaging, with extremely large FoV (up to 150{\deg}deg. on both vertical and horizontal scanning axes). The use of this disruptive LiDAR technology with advanced learning algorithms offers perspectives to improve further the perception capabilities and decision-making process of autonomous vehicles and robotic systems.
- Open Access
- 23 September 2021
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 30 (1) , 96-108
Ultra‐thin GaAs solar cells with nanophotonic metal‐dielectric diffraction gratings fabricated with displacement Talbot lithography
Ultra‐thin photovoltaics enable lightweight flexible form factors, suitable for emerging terrestrial applications such as electric vehicle integration. These devices also exhibit intrinsic radiation tolerance and increased specific power and so are uniquely enabling for space power applications, offering longer missions in hostile environments and reduced launch costs. In this work, a GaAs solar cell with an 80‐nm absorber is developed with short circuit current exceeding the single pass limit. Integrated light management is employed to compensate for increased photon transmission inherent to ultra‐thin absorbers, and efficiency enhancement of 68% over a planar on‐wafer equivalent is demonstrated. This is achieved using a wafer‐scale technique, displacement Talbot lithography, to fabricate a rear surface nanophotonic grating. Optical simulations definitively confirm Fabry‐Perot and waveguide mode contributions to the observed increase in absorption and also demonstrate a pathway to short circuit current of 26 mA/cm2, well in excess of the double pass limit.
- 23 September 2021
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 30 (1) , 96-108
Open AccessUltra‐thin GaAs solar cells with nanophotonic metal‐dielectric diffraction gratings fabricated with displacement Talbot lithography
Ultra‐thin photovoltaics enable lightweight flexible form factors, suitable for emerging terrestrial applications such as electric vehicle integration. These devices also exhibit intrinsic radiation tolerance and increased specific power and so are uniquely enabling for space power applications, offering longer missions in hostile environments and reduced launch costs. In this work, a GaAs solar cell with an 80‐nm absorber is developed with short circuit current exceeding the single pass limit. Integrated light management is employed to compensate for increased photon transmission inherent to ultra‐thin absorbers, and efficiency enhancement of 68% over a planar on‐wafer equivalent is demonstrated. This is achieved using a wafer‐scale technique, displacement Talbot lithography, to fabricate a rear surface nanophotonic grating. Optical simulations definitively confirm Fabry‐Perot and waveguide mode contributions to the observed increase in absorption and also demonstrate a pathway to short circuit current of 26 mA/cm2, well in excess of the double pass limit.
- Open Access
- 20 December 2020
- Published by MDPI AG in Nanomaterials
- Vol. 10 (12) , 2562
Impact of Inductively Coupled Plasma Etching Conditions on the Formation of Semi-Polar (\({11\overline{2}2}\)) and Non-Polar (\({11\overline{2}0}\)) GaN NanorodsThe formation of gallium nitride (GaN) semi-polar and non-polar nanostructures is of importance for improving light extraction/absorption of optoelectronic devices, creating optical resonant cavities or reducing the defect density. However, very limited studies of nanotexturing via dry etching have been performed, in comparison to wet etching. In this paper, we investigate the formation and morphology of semi-polar () and non-polar () GaN nanorods using inductively coupled plasma (ICP) etching. The impact of gas chemistry, pressure, temperature, radio-frequency (RF) and ICP power and time are explored. A dominant chemical component is found to have a significant impact on the morphology, being impacted by the polarity of the planes. In contrast, increasing the physical component enables the impact of crystal orientation to be minimized to achieve a circular nanorod profile with inclined sidewalls. These conditions were obtained for a small percentage of chlorine (Cl2) within the Cl2 + argon (Ar) plasma combined with a low pressure. Damage to the crystal was reduced by lowering the direct current (DC) bias through a reduction of the RF power and an increase of the ICP power.- 20 December 2020
- Published by MDPI AG in Nanomaterials
- Vol. 10 (12) , 2562
Open AccessImpact of Inductively Coupled Plasma Etching Conditions on the Formation of Semi-Polar (\({11\overline{2}2}\)) and Non-Polar (\({11\overline{2}0}\)) GaN NanorodsThe formation of gallium nitride (GaN) semi-polar and non-polar nanostructures is of importance for improving light extraction/absorption of optoelectronic devices, creating optical resonant cavities or reducing the defect density. However, very limited studies of nanotexturing via dry etching have been performed, in comparison to wet etching. In this paper, we investigate the formation and morphology of semi-polar () and non-polar () GaN nanorods using inductively coupled plasma (ICP) etching. The impact of gas chemistry, pressure, temperature, radio-frequency (RF) and ICP power and time are explored. A dominant chemical component is found to have a significant impact on the morphology, being impacted by the polarity of the planes. In contrast, increasing the physical component enables the impact of crystal orientation to be minimized to achieve a circular nanorod profile with inclined sidewalls. These conditions were obtained for a small percentage of chlorine (Cl2) within the Cl2 + argon (Ar) plasma combined with a low pressure. Damage to the crystal was reduced by lowering the direct current (DC) bias through a reduction of the RF power and an increase of the ICP power. - Open Access
- 27 March 2020
- Published by Springer Nature in Scientific Reports
- Vol. 10 (1) , 1-9
Influence of the reactor environment on the selective area thermal etching of GaN nanohole arrays
Selective area thermal etching (SATE) of gallium nitride is a simple subtractive process for creating novel device architectures and improving the structural and optical quality of III-nitride-based devices. In contrast to plasma etching, it allows, for example, the creation of enclosed features with extremely high aspect ratios without introducing ion-related etch damage. We report how SATE can create uniform and organized GaN nanohole arrays from c-plane and (11–22) semi-polar GaN in a conventional MOVPE reactor. The morphology, etching anisotropy and etch depth of the nanoholes were investigated by scanning electron microscopy for a broad range of etching parameters, including the temperature, the pressure, the NH3 flow rate and the carrier gas mixture. The supply of NH3 during SATE plays a crucial role in obtaining a highly anisotropic thermal etching process with the formation of hexagonal non-polar-faceted nanoholes. Changing other parameters affects the formation, or not, of non-polar sidewalls, the uniformity of the nanohole diameter, and the etch rate, which reaches 6 µm per hour. Finally, the paper discusses the SATE mechanism within a MOVPE environment, which can be applied to other mask configurations, such as dots, rings or lines, along with other crystallographic orientations.
- 27 March 2020
- Published by Springer Nature in Scientific Reports
- Vol. 10 (1) , 1-9
Open AccessInfluence of the reactor environment on the selective area thermal etching of GaN nanohole arrays
Selective area thermal etching (SATE) of gallium nitride is a simple subtractive process for creating novel device architectures and improving the structural and optical quality of III-nitride-based devices. In contrast to plasma etching, it allows, for example, the creation of enclosed features with extremely high aspect ratios without introducing ion-related etch damage. We report how SATE can create uniform and organized GaN nanohole arrays from c-plane and (11–22) semi-polar GaN in a conventional MOVPE reactor. The morphology, etching anisotropy and etch depth of the nanoholes were investigated by scanning electron microscopy for a broad range of etching parameters, including the temperature, the pressure, the NH3 flow rate and the carrier gas mixture. The supply of NH3 during SATE plays a crucial role in obtaining a highly anisotropic thermal etching process with the formation of hexagonal non-polar-faceted nanoholes. Changing other parameters affects the formation, or not, of non-polar sidewalls, the uniformity of the nanohole diameter, and the etch rate, which reaches 6 µm per hour. Finally, the paper discusses the SATE mechanism within a MOVPE environment, which can be applied to other mask configurations, such as dots, rings or lines, along with other crystallographic orientations.