Kiomars Zargoosh
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Kiomars Zargoosh has a total of 50 co-authors. Here are the top co-authors by number of shared publications:
Amir Abdolmaleki
Isfahan University of Technology
4 shared publicationsHossein Moradi Aliabadi
Department of Chemistry Isfahan University of Technology Isfahan Islamic Republic of Iran
4 shared publications- Hamid Zilouei
Department of Chemical Engineering, Isfahan University of Technology, Isfahan, Iran
3 shared publications Hamed Abedini
Department of Chemistry Isfahan University of Technology Isfahan Iran
2 shared publicationsHossein Behmadi
Department of Chemistry Mashhad Branch Islamic Azad University Mashhad Islamic Republic of Iran
2 shared publicationsHossein Habibi
Department of Chemistry Isfahan University of Technology Isfahan Iran
2 shared publications
Latest Publications
- 29 April 2026
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 65 (18) , 9177-9190
Synthesis of a Novel 5-Amino-1,3,4-thiadiazole-2-thiol-Functionalized Porous Organic Polymer (POP) as a Superadsorbent for Mercury(II) Ions
- 29 April 2026
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 65 (18) , 9177-9190
Synthesis of a Novel 5-Amino-1,3,4-thiadiazole-2-thiol-Functionalized Porous Organic Polymer (POP) as a Superadsorbent for Mercury(II) Ions
- 12 July 2024
- Published by Wiley in Chempluschem
- Vol. 89 (9) , e202400095
A Fluorescent Furan‐based Probe with Protected Functional Groups for Highly Selective and Non‐Toxic Imaging of HT‐29 Cancer Cells and 4T1 Tumors
Most of the previously reported fluorescent organic probes for cancer cell and tumor imaging have significant limitations including chemical toxicity, structural instability, low Stokes shift value, and the inability for selective accumulations in tumors during in vivo imaging. To overcome the mentioned challenges, we synthesized the fluorescent probes with protected polar functional groups to enhance the non‐toxicity nature and increase the selectivity toward tumors. In addition, the structural rigidity of the fluorescent probes was increased by embedding aromatic rings in the probe structure. This issue enables us to obtain ultrabright cell images due to enhanced fluorescence quantum yield (ΦFL) values. After synthesis and spectral characterizations, the applicability of two furan‐based and imidazole‐based fluorescent probes ( abbreviated as DCPEF and DBPPI, respectively) was investigated for ultrabright in vitro and in vivo imaging of cancer cells. The probe DCPEF shows the ΦFL value of 0.946 and the Stocks shift of 86 nm. In addition, probe DBPPI offers the ΦFL value of 0.400 and a Stocks shift of 150 nm. The MTT colorimetric cytotoxicity assay showed that probe DCPEF has minimal effects against HT‐29 (cancer) and Vero (normal) cells. The probe DCPEF produced ultrabright fluorescence images from HT‐29 cells. In addition, in vivo imaging of cancer cells showed that probe DCPEF selectively accumulates in the 4T1 tumor in mice. The spectral and chemical stability, minimal cytotoxicity, significant Stokes shift, and high degree of selectivity for tumor cells during in vivo imaging make DCPEF an appropriate candidate to be used as a standard probe for cancer cell imaging.
- 12 July 2024
- Published by Wiley in Chempluschem
- Vol. 89 (9) , e202400095
A Fluorescent Furan‐based Probe with Protected Functional Groups for Highly Selective and Non‐Toxic Imaging of HT‐29 Cancer Cells and 4T1 Tumors
Most of the previously reported fluorescent organic probes for cancer cell and tumor imaging have significant limitations including chemical toxicity, structural instability, low Stokes shift value, and the inability for selective accumulations in tumors during in vivo imaging. To overcome the mentioned challenges, we synthesized the fluorescent probes with protected polar functional groups to enhance the non‐toxicity nature and increase the selectivity toward tumors. In addition, the structural rigidity of the fluorescent probes was increased by embedding aromatic rings in the probe structure. This issue enables us to obtain ultrabright cell images due to enhanced fluorescence quantum yield (ΦFL) values. After synthesis and spectral characterizations, the applicability of two furan‐based and imidazole‐based fluorescent probes ( abbreviated as DCPEF and DBPPI, respectively) was investigated for ultrabright in vitro and in vivo imaging of cancer cells. The probe DCPEF shows the ΦFL value of 0.946 and the Stocks shift of 86 nm. In addition, probe DBPPI offers the ΦFL value of 0.400 and a Stocks shift of 150 nm. The MTT colorimetric cytotoxicity assay showed that probe DCPEF has minimal effects against HT‐29 (cancer) and Vero (normal) cells. The probe DCPEF produced ultrabright fluorescence images from HT‐29 cells. In addition, in vivo imaging of cancer cells showed that probe DCPEF selectively accumulates in the 4T1 tumor in mice. The spectral and chemical stability, minimal cytotoxicity, significant Stokes shift, and high degree of selectivity for tumor cells during in vivo imaging make DCPEF an appropriate candidate to be used as a standard probe for cancer cell imaging.
- 25 May 2022
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 139 (30)
Comparative study on the adsorption characteristics of a triazine‐Si hybrid polymer adsorbent and the natural adsorbents for removal of methylene blue from industrial wastewaters
This work aims to compare the practical ability of the novel triazine‐based polymer adsorbents (TBPA‐Si hybrid polymer) with those of the natural adsorbents for the adsorption of methylene blue (MB) from the industrial wastewaters. In this regard, a new TBPA‐Si hybrid polymer includes SH, NH, and aromatic ring functional groups for effective interactions with a wide range of organic pollutants was synthesized. In addition, pine leaves, soybean meal (SBM), and wheat bran were selected as representative of the well‐known natural adsorbents. The optimum pH values for natural adsorbents and TBPA‐Si for MB adsorption were 7 and 8, respectively. The optimum time for wheat bran and TBPA‐Si to reach the maximum MB adsorption was 15 min and for pine leaves and SBM was 5 min. The isotherm data for TBPA‐Si hybrid was well fitted to Langmuir isotherm. Pine leaves showed a mix of Langmuir and Temkin isotherms. In addition, SBM and wheat bran also showed Temkin isotherm. During the kinetics investigations, the pseudo‐second‐order kinetics models were observed for all adsorbents. The maximum adsorption capacities for TBPA‐Si and pine leaves were 15.3 and 32.1 mg.g−1, respectively. The empirical adsorption capacity for SBM and wheat brans were 71.6 and 38.3 mg.g−1, respectively. The key advantage of the TBPA‐Si is its ability for removing MB in the presence of high concentrations of electrolytes, where the removal efficiencies of the natural adsorbent were extremely reduced in these conditions. The main advantage of the natural adsorbents is their low cost for removal of MB from the effluents containing very low concentration of electrolytes.
- 25 May 2022
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 139 (30)
Comparative study on the adsorption characteristics of a triazine‐Si hybrid polymer adsorbent and the natural adsorbents for removal of methylene blue from industrial wastewaters
This work aims to compare the practical ability of the novel triazine‐based polymer adsorbents (TBPA‐Si hybrid polymer) with those of the natural adsorbents for the adsorption of methylene blue (MB) from the industrial wastewaters. In this regard, a new TBPA‐Si hybrid polymer includes SH, NH, and aromatic ring functional groups for effective interactions with a wide range of organic pollutants was synthesized. In addition, pine leaves, soybean meal (SBM), and wheat bran were selected as representative of the well‐known natural adsorbents. The optimum pH values for natural adsorbents and TBPA‐Si for MB adsorption were 7 and 8, respectively. The optimum time for wheat bran and TBPA‐Si to reach the maximum MB adsorption was 15 min and for pine leaves and SBM was 5 min. The isotherm data for TBPA‐Si hybrid was well fitted to Langmuir isotherm. Pine leaves showed a mix of Langmuir and Temkin isotherms. In addition, SBM and wheat bran also showed Temkin isotherm. During the kinetics investigations, the pseudo‐second‐order kinetics models were observed for all adsorbents. The maximum adsorption capacities for TBPA‐Si and pine leaves were 15.3 and 32.1 mg.g−1, respectively. The empirical adsorption capacity for SBM and wheat brans were 71.6 and 38.3 mg.g−1, respectively. The key advantage of the TBPA‐Si is its ability for removing MB in the presence of high concentrations of electrolytes, where the removal efficiencies of the natural adsorbent were extremely reduced in these conditions. The main advantage of the natural adsorbents is their low cost for removal of MB from the effluents containing very low concentration of electrolytes.
- Open Access
- 1 January 2022
- Published by Wiley in Journal of Nanomaterials
- Vol. 2022 (1)
Cadmium and Lead Removal from Aqueous Solution Using Magnetite Nanoparticles Biofabricated from Portulaca oleracea Leaf Extract
Magnetic nanoparticles of iron oxide (Fe3O4 NPs) were prepared using a biosynthetic method to investigate their potential use as an adsorbent for adsorption of Pb(II) and Cd(II) from the aqueous solution. The present study for the first time used the magnetite nanoparticles from leaf extract of Portulaca oleracea for the removal of Pb(II) and Cd(II) metal ions. Characterizations for the prepared Fe3O4 NPs (PO‐Fe3O4MNPs) were achieved by using X‐ray diffraction (XRD), field emission scanning electron microscope (FESEM), energy‐dispersive X‐ray spectroscopy (EDX), transmittance electron microscopy (TEM), and Fourier transform infrared (FTIR) spectroscopy. The batch adsorption process has been performed to study the effect of various parameters, such as contact time, pH, temperature, initial metal concentration, and adsorbent dose. The optimum pH for Cd(II) and Pb(II) adsorption was 6. The removal of heavy metals was found to increase with adsorbent dosage and contact time and reduced with increasing initial concentration. Langmuir, Freundlich, Khan, and Toth isotherms were used as adsorption isotherm models. The adsorption data fitted well with the Freundlich isotherm model with correlation coefficient (R2 > 0.94). The maximum adsorption capacities (Qmax) at equilibrium were 177.48 mg/g and 108.2267 mg/g for Cd(II) and Pb(II), respectively. The kinetic analysis showed that the overall adsorption process was successfully fitted with the pseudo‐second‐order kinetic model. The calculated thermodynamic parameters (∆G°, ∆H°, and ∆S°) showed that the adsorption of Cd(II) and Pb(II) ions onto PO‐Fe3O4MNPs was exothermic and spontaneous. These results demonstrate that biogenic synthesized PO‐Fe3O4MNPs are highly efficient adsorbents for the removal of Pb(II) and Cd(II) ions from contaminated water.
- 1 January 2022
- Published by Wiley in Journal of Nanomaterials
- Vol. 2022 (1)
Open AccessCadmium and Lead Removal from Aqueous Solution Using Magnetite Nanoparticles Biofabricated from Portulaca oleracea Leaf Extract
Magnetic nanoparticles of iron oxide (Fe3O4 NPs) were prepared using a biosynthetic method to investigate their potential use as an adsorbent for adsorption of Pb(II) and Cd(II) from the aqueous solution. The present study for the first time used the magnetite nanoparticles from leaf extract of Portulaca oleracea for the removal of Pb(II) and Cd(II) metal ions. Characterizations for the prepared Fe3O4 NPs (PO‐Fe3O4MNPs) were achieved by using X‐ray diffraction (XRD), field emission scanning electron microscope (FESEM), energy‐dispersive X‐ray spectroscopy (EDX), transmittance electron microscopy (TEM), and Fourier transform infrared (FTIR) spectroscopy. The batch adsorption process has been performed to study the effect of various parameters, such as contact time, pH, temperature, initial metal concentration, and adsorbent dose. The optimum pH for Cd(II) and Pb(II) adsorption was 6. The removal of heavy metals was found to increase with adsorbent dosage and contact time and reduced with increasing initial concentration. Langmuir, Freundlich, Khan, and Toth isotherms were used as adsorption isotherm models. The adsorption data fitted well with the Freundlich isotherm model with correlation coefficient (R2 > 0.94). The maximum adsorption capacities (Qmax) at equilibrium were 177.48 mg/g and 108.2267 mg/g for Cd(II) and Pb(II), respectively. The kinetic analysis showed that the overall adsorption process was successfully fitted with the pseudo‐second‐order kinetic model. The calculated thermodynamic parameters (∆G°, ∆H°, and ∆S°) showed that the adsorption of Cd(II) and Pb(II) ions onto PO‐Fe3O4MNPs was exothermic and spontaneous. These results demonstrate that biogenic synthesized PO‐Fe3O4MNPs are highly efficient adsorbents for the removal of Pb(II) and Cd(II) ions from contaminated water.
- 22 September 2021
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 139 (8) , 51671
Synthesis and application of amine‐sulfone‐rich mesoporous organic polymer for the ultrafast removal of both cationic and anionic organic pollutants from industrial wastewaters
Water pollution is becoming an up‐rising threat to the environment and human being in recent years and turning to a major global challenge. The wastewaters released by the textile and dyestuff industries are one of the major sources of contamination. The aim of this work is preparation of stable, reusable, and fast adsorbent for complete removal of both cationic and anionic pollutants from industrial wastewaters. To obtain these goals, an amine‐sulfone‐rich mesoporous organic polymer (Daps‐POP) was synthesized, structurally characterized and applied for removing of methylene blue (MB) and direct blue 108 (DB‐108) as cationic and anionic model dye pollutants, respectively. The affecting variables on the adsorption process were optimized and the possible adsorbate‐adsorbent interactions were identified. The synthesized Daps‐POP was applied to industrial wastewaters and presents complete removal of model dye pollutants proving the idea of using POPs in industrial wastewater treatments. The equilibrium adsorption capacity (qe) found to be 48.1 mg.g−1 and 25.64 mg.g−1 for MB and DB‐108, respectively. The adsorption takes place in only 5 min for both dyes. Moreover, the reusability of the Daps‐POP was successful during three consecutive runs corroborating its promising application in industrial water treatment.
- 22 September 2021
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 139 (8) , 51671
Synthesis and application of amine‐sulfone‐rich mesoporous organic polymer for the ultrafast removal of both cationic and anionic organic pollutants from industrial wastewaters
Water pollution is becoming an up‐rising threat to the environment and human being in recent years and turning to a major global challenge. The wastewaters released by the textile and dyestuff industries are one of the major sources of contamination. The aim of this work is preparation of stable, reusable, and fast adsorbent for complete removal of both cationic and anionic pollutants from industrial wastewaters. To obtain these goals, an amine‐sulfone‐rich mesoporous organic polymer (Daps‐POP) was synthesized, structurally characterized and applied for removing of methylene blue (MB) and direct blue 108 (DB‐108) as cationic and anionic model dye pollutants, respectively. The affecting variables on the adsorption process were optimized and the possible adsorbate‐adsorbent interactions were identified. The synthesized Daps‐POP was applied to industrial wastewaters and presents complete removal of model dye pollutants proving the idea of using POPs in industrial wastewater treatments. The equilibrium adsorption capacity (qe) found to be 48.1 mg.g−1 and 25.64 mg.g−1 for MB and DB‐108, respectively. The adsorption takes place in only 5 min for both dyes. Moreover, the reusability of the Daps‐POP was successful during three consecutive runs corroborating its promising application in industrial water treatment.
- 2 February 2021
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 45 (10) , 4843-4853
Synthesis of a luminescent g-C3N4–WO3–Bi2WO6/SrAl2O4:Eu2+,Dy3+ nanocomposite as a double z-scheme sunlight activable photocatalyst
Synthesis of the phosphorescent double z-scheme g-C3N4–WO3–Bi2WO6/SrAl2O4:Eu2+,Dy3+ nanocomposite especially suitable for the removal of pollutants under cloudy weather.
- 2 February 2021
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 45 (10) , 4843-4853
Synthesis of a luminescent g-C3N4–WO3–Bi2WO6/SrAl2O4:Eu2+,Dy3+ nanocomposite as a double z-scheme sunlight activable photocatalyst
Synthesis of the phosphorescent double z-scheme g-C3N4–WO3–Bi2WO6/SrAl2O4:Eu2+,Dy3+ nanocomposite especially suitable for the removal of pollutants under cloudy weather.
- 4 June 2020
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 31 (14) , 11482-11495
Eu2+- and Nd3+-Doped CaAl2O4/WO3/polyester nanocomposite as a sunlight-activated photocatalyst for fast removal of dyes from industrial wastes
- 4 June 2020
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 31 (14) , 11482-11495
Eu2+- and Nd3+-Doped CaAl2O4/WO3/polyester nanocomposite as a sunlight-activated photocatalyst for fast removal of dyes from industrial wastes
- 7 December 2019
- Published by Springer Nature in Journal of the Iranian Chemical Society
- Vol. 17 (4) , 923-933
4, 4′-Diamino-4″-methoxytriphenylamine as highly sensitive fluorimetric sensor for the determination of water in organic solvents
- 7 December 2019
- Published by Springer Nature in Journal of the Iranian Chemical Society
- Vol. 17 (4) , 923-933
4, 4′-Diamino-4″-methoxytriphenylamine as highly sensitive fluorimetric sensor for the determination of water in organic solvents