Anu Mary Ealias
Research Subjects
Anu Mary Ealias has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Giphin George
School of Civil and Chemical Engineering, Vellore Institute of Technology, Vellore Campus, Vellore, India
6 shared publications - Manickam Puratchiveeran Saravanakumar
School of Civil and Chemical Engineering, Vellore Institute of Technology, Vellore Campus, Vellore, India.
4 shared publications M.P. Saravanakumar
3 shared publications- Harez Rashid Ahmed
Department of Chemistry, College of Science, University of Sulaimani, Sulaymaniyah, Iraq
2 shared publications - Hillary Agaba Yeheyo
Department of Civil Engineering, Koneru Lakshmaiah Education Foundation, Vaddeswaram, India
2 shared publications Devika Satish Desai
1 shared publication
Latest Publications
- Top Cited PapersOpen Access
- 17 March 2026
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 16 (17) , 15336-15349
Comparative evaluation of persulfate and peroxy monosulfate-based advanced oxidation processes for amoxicillin degradation: mechanisms, efficiency, and challenges
The widespread occurrence of antibiotics in aquatic environments has raised serious concerns due to their persistence, toxicity, and contribution to the proliferation of antibiotic-resistant bacteria.
- 17 March 2026
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 16 (17) , 15336-15349
Top Cited PapersOpen AccessComparative evaluation of persulfate and peroxy monosulfate-based advanced oxidation processes for amoxicillin degradation: mechanisms, efficiency, and challenges
The widespread occurrence of antibiotics in aquatic environments has raised serious concerns due to their persistence, toxicity, and contribution to the proliferation of antibiotic-resistant bacteria.
- Open Access
- 3 December 2025
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 15 (56) , 48639-48665
Advanced oxidation processes for the removal of antidepressants from wastewater: a comprehensive review
Pharmaceutical contaminants, particularly antidepressants, have emerged as a critical environmental concern due to their persistence in aquatic ecosystems and potential toxicological effects.
- 3 December 2025
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 15 (56) , 48639-48665
Open AccessAdvanced oxidation processes for the removal of antidepressants from wastewater: a comprehensive review
Pharmaceutical contaminants, particularly antidepressants, have emerged as a critical environmental concern due to their persistence in aquatic ecosystems and potential toxicological effects.
- 30 November 2025
- Published by Springer Nature in Bulletin of Environmental Contamination and Toxicology
- Vol. 115 (6) , 75
Bioremediation of dimethoate and atrazine in black cotton soil using Chlorella vulgaris
Pesticides pose a significant threat to soil ecosystems worldwide due to their widespread use in agricultural practices. Bioremediation offers a sustainable solution by leveraging the natural capabilities of microorganisms. This study explores the efficacy of Chlorella vulgaris in remediating dimethoate and atrazine contamination in soil environments. Culturing C. vulgaris in a pesticide-contaminated soil slurry revealed a dose-dependent increase in removal efficiency, peaking at a 1.0 mgL−1 concentration for both pesticides. Moreover, contact time significantly influenced removal rates, with 40% dimethoate and 45.5% atrazine removal achieved after 14 days. Optimal microalgal dosage (10 mL) yielded the highest removal efficiencies, indicating a saturation effect beyond this threshold. High-performance liquid chromatography analysis confirmed notable reductions in pesticide concentrations post-bioremediation. Response Surface Methodology analyses further validated the model’s significance and suitability for predicting removal efficiencies, highlighting the robustness of the bioremediation process. Findings underscore the potential of C. vulgaris as a cost-effective and environmentally friendly approach for mitigating pesticide contamination in agricultural soils. Future research should focus on elucidating the underlying mechanisms driving observed trends to further optimize bioremediation strategies. Graphical abstract
- 30 November 2025
- Published by Springer Nature in Bulletin of Environmental Contamination and Toxicology
- Vol. 115 (6) , 75
Bioremediation of dimethoate and atrazine in black cotton soil using Chlorella vulgaris
Pesticides pose a significant threat to soil ecosystems worldwide due to their widespread use in agricultural practices. Bioremediation offers a sustainable solution by leveraging the natural capabilities of microorganisms. This study explores the efficacy of Chlorella vulgaris in remediating dimethoate and atrazine contamination in soil environments. Culturing C. vulgaris in a pesticide-contaminated soil slurry revealed a dose-dependent increase in removal efficiency, peaking at a 1.0 mgL−1 concentration for both pesticides. Moreover, contact time significantly influenced removal rates, with 40% dimethoate and 45.5% atrazine removal achieved after 14 days. Optimal microalgal dosage (10 mL) yielded the highest removal efficiencies, indicating a saturation effect beyond this threshold. High-performance liquid chromatography analysis confirmed notable reductions in pesticide concentrations post-bioremediation. Response Surface Methodology analyses further validated the model’s significance and suitability for predicting removal efficiencies, highlighting the robustness of the bioremediation process. Findings underscore the potential of C. vulgaris as a cost-effective and environmentally friendly approach for mitigating pesticide contamination in agricultural soils. Future research should focus on elucidating the underlying mechanisms driving observed trends to further optimize bioremediation strategies. Graphical abstract
- Open Access
- 11 July 2025
- Published by Akademia Humanistyczno-Ekonomiczna w Lodzi in Zarządzanie Innowacyjne w Gospodarce i Biznesie
- No. 1/40,p. 13-38
Examining the impact of non-monetary factors on voluntary employee turnover in the construction industry
The construction sector is vital to economic growth but faces high employee turnover. This study explored key non-monetary factors (NMFs) influencing voluntary turnover among Ugandan construction workers. A literature-based list of NMFs was assessed through a survey of 110 workers. Data analysis identified ten major NMFs, with training and career development, work-life balance, work overload and stress, decision-making involvement, job security, and leadership style as the most impactful. These findings highlight the need for targeted strategies to improve retention. The study provides valuable insights and a foundation for future research into additional factors affecting turnover.
- 11 July 2025
- Published by Akademia Humanistyczno-Ekonomiczna w Lodzi in Zarządzanie Innowacyjne w Gospodarce i Biznesie
- No. 1/40,p. 13-38
Open AccessExamining the impact of non-monetary factors on voluntary employee turnover in the construction industry
The construction sector is vital to economic growth but faces high employee turnover. This study explored key non-monetary factors (NMFs) influencing voluntary turnover among Ugandan construction workers. A literature-based list of NMFs was assessed through a survey of 110 workers. Data analysis identified ten major NMFs, with training and career development, work-life balance, work overload and stress, decision-making involvement, job security, and leadership style as the most impactful. These findings highlight the need for targeted strategies to improve retention. The study provides valuable insights and a foundation for future research into additional factors affecting turnover.
- 7 August 2020
- Published by Taylor & Francis in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
- Vol. 46 (1) , 12010-12024
Fabrication of Dye-Sensitized Solar Cells using natural flower dye extracts: A study on performance analysis and solar dye degradation
The performance of dye-sensitized solar cell (DSSC) mostly depends on dye as the sensitizer material. Natural dyes can be used as a suitable alternative, because of its minimal extraction effort, easy attainability, and no environmental risk. The absorption spectrum of the extracted dyes was observed by using UV-Vis spectrometer, which ensued a peak value around 490–550 nm. In this study, three flowers such as Cape honeysuckle (Tecomaria capensis), Bauhinia (Bauhinia purpurea) and Kalanchoe (Kalanchoe blossfeldiana) were used as the sensitizer. The absorption coefficient (α) and optical energy band gap of the extracted dyes were calculated. The extracted dyes were examined for the degradation study under sunlight and observed a faster degradation rate for the dye extracted from Tecomaria capensis. Functional groups and intermolecular bonds were identified by using FTIR spectroscopy. The J-V curves of the assembled solar cell beneath Air Mass 1.5 utilizing a simulated illumination of 100 mW/cm2 were plotted. The assembled solar cell using Kalanchoe flower dye as the sensitizer shows the best performance among the three dyes with a short-circuit current density ( ) of 2.874 mA/cm2, open-circuit voltage ( of 0.712 V and a noticeable power conversion efficiency (PCE) of 0.610%. From the stability studies, the cell comprises Kalanchoe flower dye showed more stable under natural conditions.- 7 August 2020
- Published by Taylor & Francis in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
- Vol. 46 (1) , 12010-12024
Fabrication of Dye-Sensitized Solar Cells using natural flower dye extracts: A study on performance analysis and solar dye degradation
The performance of dye-sensitized solar cell (DSSC) mostly depends on dye as the sensitizer material. Natural dyes can be used as a suitable alternative, because of its minimal extraction effort, easy attainability, and no environmental risk. The absorption spectrum of the extracted dyes was observed by using UV-Vis spectrometer, which ensued a peak value around 490–550 nm. In this study, three flowers such as Cape honeysuckle (Tecomaria capensis), Bauhinia (Bauhinia purpurea) and Kalanchoe (Kalanchoe blossfeldiana) were used as the sensitizer. The absorption coefficient (α) and optical energy band gap of the extracted dyes were calculated. The extracted dyes were examined for the degradation study under sunlight and observed a faster degradation rate for the dye extracted from Tecomaria capensis. Functional groups and intermolecular bonds were identified by using FTIR spectroscopy. The J-V curves of the assembled solar cell beneath Air Mass 1.5 utilizing a simulated illumination of 100 mW/cm2 were plotted. The assembled solar cell using Kalanchoe flower dye as the sensitizer shows the best performance among the three dyes with a short-circuit current density ( ) of 2.874 mA/cm2, open-circuit voltage ( of 0.712 V and a noticeable power conversion efficiency (PCE) of 0.610%. From the stability studies, the cell comprises Kalanchoe flower dye showed more stable under natural conditions.- 14 December 2019
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 27 (3) , 2955-2976
Application of protein-functionalised aluminium nanosheets synthesised from sewage sludge for dye removal in a fixed-bed column: Investigation on design parameters and kinetic models
Protein-functionalised aluminium nanosheets (PRS–AlNs) were packed in a continuous fixed-bed column to remove crystal violet (CV) and Congo red (CR) dyes. A group of characterisation techniques, like SEM, TEM, AFM, XRD, BET, DSC and Raman spectroscopy, was performed for PRS–AlNs. The influence of several factors like bed depth (1, 2 and 3 cm), inlet dye concentration (50, 100 and 150 mg/L) and inlet flow rate (1.17, 2.26 and 3.34 mL/min) on the characteristics of the breakthrough profile of the adsorption process was examined at optimum pH 9.8 and 3.5 for CV and CR, respectively. The maximum adsorption capacity was achieved as 38.70 and 57.86 mg/g for CV and CR at 1 cm bed depth, 150 mg/L inlet concentration of the dye and 3.34 mL/min inlet rate of flow. The experimental data were analysed using kinetic models like the Yoon–Nelson, Adams–Bohart and Thomas models. Also, a detailed mechanism behind the CV and CR adsorption using PRS–AlNs was proposed in this research work.
- 14 December 2019
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 27 (3) , 2955-2976
Application of protein-functionalised aluminium nanosheets synthesised from sewage sludge for dye removal in a fixed-bed column: Investigation on design parameters and kinetic models
Protein-functionalised aluminium nanosheets (PRS–AlNs) were packed in a continuous fixed-bed column to remove crystal violet (CV) and Congo red (CR) dyes. A group of characterisation techniques, like SEM, TEM, AFM, XRD, BET, DSC and Raman spectroscopy, was performed for PRS–AlNs. The influence of several factors like bed depth (1, 2 and 3 cm), inlet dye concentration (50, 100 and 150 mg/L) and inlet flow rate (1.17, 2.26 and 3.34 mL/min) on the characteristics of the breakthrough profile of the adsorption process was examined at optimum pH 9.8 and 3.5 for CV and CR, respectively. The maximum adsorption capacity was achieved as 38.70 and 57.86 mg/g for CV and CR at 1 cm bed depth, 150 mg/L inlet concentration of the dye and 3.34 mL/min inlet rate of flow. The experimental data were analysed using kinetic models like the Yoon–Nelson, Adams–Bohart and Thomas models. Also, a detailed mechanism behind the CV and CR adsorption using PRS–AlNs was proposed in this research work.