Anastasiya A. Zanishevskaya

Biosensor technologies in medicine, as in many other areas, are replacing labor-intensive methods of monitoring human health. This paper presents the results of experimental studies on label-free sensors based on a hollow core microstructured optical waveguide (HC-MOW) for human blood serum analysis. The MOWs with a hollow core of 247.5 µm in diameter were manufactured and used in our work. These parameters allow the hollow core to be filled with high-viscosity solutions due to the capillary properties of the fiber. Calculations of the spectral properties of the HC-MOW fiber were carried out and experimentally confirmed. Twenty-one blood serum samples from volunteers were analyzed using standard photometry (commercial kits) and an experimental biosensor. The obtained transmission spectra were processed by the principal component analysis method and conclusions were drawn about the possibility of using this biosensor in point-of-care medicine. A significant difference was shown between the blood serum of healthy patients and patients with confirmed diagnoses and a long history of cardiovascular system abnormalities. Algorithms for spectra processing using the Origin program are presented.

Biosensor technologies in medicine, as in many other areas, are replacing labor-intensive methods of monitoring human health. In this paper, the results of experimental studies of label-free sensors based on hollow-core microstructured optical waveguide (HC-MOW) for human blood serum analysis obtained. The HC-MOWs with a hollow core of 247,5 µm in diameter were manufactured and used in our work. These parameters make it possible to fill the hollow core with high-viscosity solutions due to the capillary properties of the fiber waveguide. Calculations of the spectral properties of HC-MOW fiber were carried out and experimentally confirmed. 21 blood serum samples from volunteers were examined using standard photometry (commercial kits) and an experimental biosensor. The obtained transmission spectra were processed by the principal component analysis method and conclusions were drawn about the possibility of using this biosensor in point-of-care medicine. A significant difference was shown between the blood serum of patients with normal and abnormal blood levels. Algorithms for spectra processing using the Origin program are presented..

Microstructured optical waveguides (MOW) are of great interest for chemical and biological sensing. Due to the high overlap between a guiding light mode and an analyte filling of one or several fiber capillaries, such systems are able to provide strong sensitivity with respect to variations in the refractive index and the thickness of filling materials. Here, we introduce a novel type of functionalized MOWs whose capillaries are coated by a layer-by-layer (LBL) approach, enabling the alternate deposition of silica particles (SiO₂) at different diameters—300 nm, 420 nm, and 900 nm—and layers of poly(diallyldimethylammonium chloride) (PDDA). We demonstrate up to three covering bilayers consisting of 300-nm silica particles. Modifications in the MOW transmission spectrum induced by coating are measured and analyzed. The proposed technique of MOW functionalization allows one to reach novel sensing capabilities, including an increase in the effective sensing area and the provision of a convenient scaffold for the attachment of long molecules such as proteins.

A sensor based on microstructured waveguides (MWGs) with a hollow core inner surface covered with polyelectrolyte-layer-stabilized gold nanostars was developed for the SERS sensing of dissolved analytes. A polyelectrolyte-layer coating over the inner surface of glass cladding served as a spacer, reducing nonlinear optical effects in the glass near plasmonic hotspots of nanoparticles, as a stabilizing agent for thermodynamically unstable gold nanostars and as an optical coating for the fine-tuning of MWG bandgaps. This approach can be used to construct different kinds of SERS sensors for dissolved analytes, providing conservation, the prevention of coagulation, and the drying of a liquid sample for the time required to record the signal.

Photonic crystal fibers with hollow core (HC PCFs) are a specific class of optical fibers characterized by microstructure with periodic holes oriented along fiber. The combination of HC PCF with Raman spectroscopy for biosensors creation is attractive in the terms of the low sample volume, the possibility to increase the integration time without sample degradation and maintaining constant focus during experiments. Here we propose layer-by-layer polyelectrolyte coating of HC PCF inner surface in order to obtain charge-selective absorption of analyte, stabilization of Surface-Enhanced Raman scattering (SERS)-active gold nanoparticles. Distance between SERS hotspots and glass reduces nonlinear signals from glass, and increases signal-to-noise ratio of SERS spectra.

This paper provides an overview of the main types of carbon nanostructures: fullerenes, nanotubes, and nanohorns. The newest carbon nanomaterials, nanographitized activated porous carbon containing nanohorns, is studied. The results of experimental data are used to study the properties of the nanographitized carbon: electric properties, sorption, and its impact on water.