Carlos Perez-Montenegro
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Carlos Perez-Montenegro has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Andrés Molano-Jimenez
Department of Engineering Studies for Innovation, Universidad Iberoamericana Ciudad de México, Prolongación Paseo de la Reforma 880, Colonia Lomas de Santa Fé, Mexico City 01219, Mexico
5 shared publications Enrico Canuto
Department of Control and Computer Engineering, Politecnico di Torino, 10129, Italy
5 shared publications- Enrico Canuto
Politecnico di Torino
3 shared publications - Carlo Novara
Politecnico di Torino, Turin, Italy
2 shared publications - Luigi Colangelo
Polytecnic of Turin, Turin, Italy
2 shared publications - Diomar Elena Calderón Riaño
Pascual Bravo University Institution
1 shared publication
Latest Publications
- Open Access
Embedded Model Control of Networked Control Systems: an Experimental Case-study -- Stability analysis and further results
In Networked Control Systems (NCS), the absence of physical communication links in the loop leads to relevant issues, such as measurement delays and asynchronous execution of the control commands. These issues may lead to unwanted control behaviours. This ArXiv paper is intended to give additional results to the work presented in "Embedded Model Control of Networked Control Systems: an Experimental Case-study". The last one presents an original approach, based on the Embedded Model Control, to deal with experimental scenarios characterized by asynchronous control timing. The effectiveness of the proposed approach is demonstrated with a differential-drive robot, first with high-fidelity simulations and finally with several experimental tests. Specifically, the present work aims to study the stability analysis of the EMC experimental setup and to give further experimental results, to complement those presented in the main paper, "Embedded Model Control of Networked Control Systems: an Experimental Case-study".
Open AccessEmbedded Model Control of Networked Control Systems: an Experimental Case-study -- Stability analysis and further results
In Networked Control Systems (NCS), the absence of physical communication links in the loop leads to relevant issues, such as measurement delays and asynchronous execution of the control commands. These issues may lead to unwanted control behaviours. This ArXiv paper is intended to give additional results to the work presented in "Embedded Model Control of Networked Control Systems: an Experimental Case-study". The last one presents an original approach, based on the Embedded Model Control, to deal with experimental scenarios characterized by asynchronous control timing. The effectiveness of the proposed approach is demonstrated with a differential-drive robot, first with high-fidelity simulations and finally with several experimental tests. Specifically, the present work aims to study the stability analysis of the EMC experimental setup and to give further experimental results, to complement those presented in the main paper, "Embedded Model Control of Networked Control Systems: an Experimental Case-study".
- Open Access
- 1 June 2018
- Published by Unilasallista Corporación Universitaria in Producción + Limpia
- Vol. 13 (1) , 7-18
Simulación e implementación de prácticas agrícolas en la comunidad de La Gabriela en Medellín-Colombia
La comunidad, entendida como grupo social a diferentes escalas como hogar, barrio, pueblo, industria, ciudad, tiene la responsabilidad de los cambios en el entorno en que vive; estas transformaciones tienen su origen en las decisiones que se toman día a día, los productos que se crean, el estilo de vida que se lleva y las interacciones que se dan con el medio ambiente.
- 1 June 2018
- Published by Unilasallista Corporación Universitaria in Producción + Limpia
- Vol. 13 (1) , 7-18
Open AccessSimulación e implementación de prácticas agrícolas en la comunidad de La Gabriela en Medellín-Colombia
La comunidad, entendida como grupo social a diferentes escalas como hogar, barrio, pueblo, industria, ciudad, tiene la responsabilidad de los cambios en el entorno en que vive; estas transformaciones tienen su origen en las decisiones que se toman día a día, los productos que se crean, el estilo de vida que se lleva y las interacciones que se dan con el medio ambiente.
- Open Access
- 1 January 2016
- Published by Elsevier in IFAC-PapersOnLine
- Vol. 49 (17) , 266-271
Embedded Model Control for UAV Quadrotor via Feedback Linearization
- 1 January 2016
- Published by Elsevier in IFAC-PapersOnLine
- Vol. 49 (17) , 266-271
Open AccessEmbedded Model Control for UAV Quadrotor via Feedback Linearization
- 1 June 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 501-507
The feedback linearisation method for Embedded Model Control: The Borea project case-study
Feedback linearisation has been proved to be a powerful tool for making non-linear system dynamics fully or partially linear. This study investigates the use of the feedback linearisation approach as a novel way to design the internal model for Embedded Model Control, when applied to non-linear systems. This idea is applied to the control of an Unmanned Aerial Vehicle: the Borea project quadrotor. Embedded Model Control methodology implies the design of an internal model (Embedded Model) coded into the control unit and running in parallel with the plant. The difference between the internal model output and the plant output is used to estimate the unknown disturbances. These unknown disturbances include all the non-linearities that can be rejected by means of the control law. Using a numerical simulator, we demonstrate the feasibility of this methodology for accurate design of the internal model, starting from the non-linear system. This indicates that a feedback linearisation approach allows the extension of embedded model control techniques to non-linear systems control. What is more, the EMC is successfully applied to the control of the Borea quadrotor.
- 1 June 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 501-507
The feedback linearisation method for Embedded Model Control: The Borea project case-study
Feedback linearisation has been proved to be a powerful tool for making non-linear system dynamics fully or partially linear. This study investigates the use of the feedback linearisation approach as a novel way to design the internal model for Embedded Model Control, when applied to non-linear systems. This idea is applied to the control of an Unmanned Aerial Vehicle: the Borea project quadrotor. Embedded Model Control methodology implies the design of an internal model (Embedded Model) coded into the control unit and running in parallel with the plant. The difference between the internal model output and the plant output is used to estimate the unknown disturbances. These unknown disturbances include all the non-linearities that can be rejected by means of the control law. Using a numerical simulator, we demonstrate the feasibility of this methodology for accurate design of the internal model, starting from the non-linear system. This indicates that a feedback linearisation approach allows the extension of embedded model control techniques to non-linear systems control. What is more, the EMC is successfully applied to the control of the Borea quadrotor.
- 1 July 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 21596247,p. 452-457
Saturation managing for the propulsion system and optimal dispatching proposal for multi-rotor UAV
This paper states a methodology in order to manage the saturation of the propulsion system providing flexibility to the vehicle control unit. To reach this objective a n-copter propeller system is described and a general dispatching law without constrains is found. Furthermore, an optimal propeller problem is proposed and a possible solution using a recursive least squares method is presented.
- 1 July 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 21596247,p. 452-457
Saturation managing for the propulsion system and optimal dispatching proposal for multi-rotor UAV
This paper states a methodology in order to manage the saturation of the propulsion system providing flexibility to the vehicle control unit. To reach this objective a n-copter propeller system is described and a general dispatching law without constrains is found. Furthermore, an optimal propeller problem is proposed and a possible solution using a recursive least squares method is presented.
- 1 January 2013
- Published by Elsevier in IFAC Proceedings Volumes
- Vol. 46 (30) , 168-173
Control architecture and simulation of the Borea quadrotor
- 1 January 2013
- Published by Elsevier in IFAC Proceedings Volumes
- Vol. 46 (30) , 168-173
Control architecture and simulation of the Borea quadrotor
- 1 January 2013
- Published by Elsevier in IFAC Proceedings Volumes
- Vol. 46 (19) , 370-375
Guidance and control for the propulsion phase of planetary landing
- 1 January 2013
- Published by Elsevier in IFAC Proceedings Volumes
- Vol. 46 (19) , 370-375
Guidance and control for the propulsion phase of planetary landing
- 3 July 2012
- Published by Elsevier in ISA Transactions
- Vol. 51 (5) , 584-595
Embedded model control calls for disturbance modeling and rejection
- 3 July 2012
- Published by Elsevier in ISA Transactions
- Vol. 51 (5) , 584-595
Embedded model control calls for disturbance modeling and rejection
- 1 March 2012
- Published by Elsevier in Acta Astronautica
- Vol. 72, 121-131
Disturbance rejection in space applications: Problems and solutions
- 1 March 2012
- Published by Elsevier in Acta Astronautica
- Vol. 72, 121-131
Disturbance rejection in space applications: Problems and solutions
- 1 September 2011
- Published by Elsevier in Acta Astronautica
- Vol. 69 (7-8) , 571-582
Long-distance, drag-free, low-thrust, LEO formation control for Earth gravity monitoring
- 1 September 2011
- Published by Elsevier in Acta Astronautica
- Vol. 69 (7-8) , 571-582
Long-distance, drag-free, low-thrust, LEO formation control for Earth gravity monitoring