Jiayue Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jiayue Wang has a total of 170 co-authors. Here are the top co-authors by number of shared publications:
- Bilge Yildiz
Department of Materials Science and Engineering, Massachusetts Institute of Technology, 77 Massachusetts Avenue, Cambridge, Massachusetts 02139, USA
14 shared publications - Iradwikanari Waluyo
Brookhaven National Laboratory
7 shared publications Harold Y. Hwang
SLAC National Accelerator Laboratory
6 shared publications- Adrian Hunt
Brookhaven National Laboratory
5 shared publications - Ethan J. Crumlin
Lawrence Berkeley National Laboratory
5 shared publications - Jing Yang
Max Planck Institute for Sustainable Materials
5 shared publications
Latest Publications
- 7 November 2026
- Published by American Chemical Society (ACS) in Nano Letters
Ultrathin SrTiO3 Capping Stabilizes the Surface Chemistry of Brownmillerite Ferrites during Reduction
Redox processes in oxides are central to materials synthesis and functionality, but their control is often hindered by surface instabilities. Using ambient-pressure X-ray photoelectron spectroscopy, we show that a nominally 1 nm-thick SrTiO3 (STO) cap markedly enhances the surface stability of La0.05Sr0.95FeO2.5-δ (LSFO) thin films during H2 reduction by suppressing the formation of a secondary metallic Fe0 phase. Kinetic analysis indicates that the STO cap reduces the effective Fe0 formation rates by more than 6-fold at both 250 and 350 °C. These findings highlight ultrathin capping layers as an effective strategy for stabilizing oxide surfaces during redox.
- 7 November 2026
- Published by American Chemical Society (ACS) in Nano Letters
Ultrathin SrTiO3 Capping Stabilizes the Surface Chemistry of Brownmillerite Ferrites during Reduction
Redox processes in oxides are central to materials synthesis and functionality, but their control is often hindered by surface instabilities. Using ambient-pressure X-ray photoelectron spectroscopy, we show that a nominally 1 nm-thick SrTiO3 (STO) cap markedly enhances the surface stability of La0.05Sr0.95FeO2.5-δ (LSFO) thin films during H2 reduction by suppressing the formation of a secondary metallic Fe0 phase. Kinetic analysis indicates that the STO cap reduces the effective Fe0 formation rates by more than 6-fold at both 250 and 350 °C. These findings highlight ultrathin capping layers as an effective strategy for stabilizing oxide surfaces during redox.
- 10 July 2026
- Published by American Chemical Society (ACS) in Nano Letters
Defect-Engineered Scaling of Lead-Free Ferroelectrics with Ultra-Low-Voltage Switching
Scaling ferroelectrics to nanometer thicknesses remains a central challenge for low-power, nonvolatile electronics, as leakage currents increasingly dominate at reduced dimensions. Alkali-based, lead-free ferroelectrics offer an environmentally sustainable alternative to lead-based systems, yet their scaling is severely limited by leakage arising from volatile alkali constituents. Here, we show that this intrinsic limitation can be transformed into an advantageous degree of freedom through defect engineering. By precisely modulating alkali deficiency during thin-film synthesis, we engineer clustered defect complexes that function as deep trap states, strongly suppressing leakage and enabling robust ferroelectric operation in ultrathin films down to the sub-10 nm regime at voltages below 100 mV. Our results establish defect-enabled scaling as a viable pathway for advancing environmentally benign ferroelectrics toward ultra-low-power, nonvolatile electronic technologies.
- 10 July 2026
- Published by American Chemical Society (ACS) in Nano Letters
Defect-Engineered Scaling of Lead-Free Ferroelectrics with Ultra-Low-Voltage Switching
Scaling ferroelectrics to nanometer thicknesses remains a central challenge for low-power, nonvolatile electronics, as leakage currents increasingly dominate at reduced dimensions. Alkali-based, lead-free ferroelectrics offer an environmentally sustainable alternative to lead-based systems, yet their scaling is severely limited by leakage arising from volatile alkali constituents. Here, we show that this intrinsic limitation can be transformed into an advantageous degree of freedom through defect engineering. By precisely modulating alkali deficiency during thin-film synthesis, we engineer clustered defect complexes that function as deep trap states, strongly suppressing leakage and enabling robust ferroelectric operation in ultrathin films down to the sub-10 nm regime at voltages below 100 mV. Our results establish defect-enabled scaling as a viable pathway for advancing environmentally benign ferroelectrics toward ultra-low-power, nonvolatile electronic technologies.
- 15 June 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (32) , 34025-34032
Freestanding Ordered Intermetallic Nanomembranes Released from Etchable Oxide Templates
Intermetallic compounds exhibit long-range atomic ordering that endows them with physicochemical properties distinct from those of elemental metals and disordered alloys. Extending ordered intermetallics into ultrathin, freestanding geometries is of both fundamental and technological interest, yet it remains challenging because the high temperatures required for chemical ordering exceed the thermal stability of conventional sacrificial templates. Here, we introduce water-etchable aluminate oxides as lattice-matched, thermally robust sacrificial templates for the epitaxial growth and nondestructive release of intermetallic nanomembranes. Using Pt3Sn as a model system, we realize millimeter-scale freestanding membranes that preserve long-range chemical order and crystallographic orientation after being released. These nanomembranes maintain structural integrity and mechanical robustness during transfer and under mechanical loading, demonstrating their compatibility with flexible device architectures. Low-temperature magnetotransport measurements further reveal the preservation of quantum interference and multiband transport behaviors. This oxide template strategy establishes a generalizable synthetic pathway toward freestanding intermetallic nanomembranes and other ultrathin metal systems.
- 15 June 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (32) , 34025-34032
Freestanding Ordered Intermetallic Nanomembranes Released from Etchable Oxide Templates
Intermetallic compounds exhibit long-range atomic ordering that endows them with physicochemical properties distinct from those of elemental metals and disordered alloys. Extending ordered intermetallics into ultrathin, freestanding geometries is of both fundamental and technological interest, yet it remains challenging because the high temperatures required for chemical ordering exceed the thermal stability of conventional sacrificial templates. Here, we introduce water-etchable aluminate oxides as lattice-matched, thermally robust sacrificial templates for the epitaxial growth and nondestructive release of intermetallic nanomembranes. Using Pt3Sn as a model system, we realize millimeter-scale freestanding membranes that preserve long-range chemical order and crystallographic orientation after being released. These nanomembranes maintain structural integrity and mechanical robustness during transfer and under mechanical loading, demonstrating their compatibility with flexible device architectures. Low-temperature magnetotransport measurements further reveal the preservation of quantum interference and multiband transport behaviors. This oxide template strategy establishes a generalizable synthetic pathway toward freestanding intermetallic nanomembranes and other ultrathin metal systems.
- 18 February 2026
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 26 (8) , 2932-2939
Atomic-Scale Moiré and Electronic Structure Analysis of Twisted Epitaxial MoS 2 –Au–MoS 2 Heterostructures
Twisted epitaxy enables precise orientation control of nanostructures confined within van der Waals (vdW) gaps. Here, we investigate the moiré and electronic structure of a representative twisted epitaxial system, where Au nanodiscs are grown inside twisted bilayer MoS2 with a 6° interlayer twist, inducing a 3° symmetrical misalignment of Au relative to each MoS2 layer (MoS2-Au-MoS2). Using multislice electron ptychography (MEP), we resolve the three-dimensional "moiré-of-moirés" structure of MoS2-Au-MoS2 with atomic resolution. Electron energy loss spectroscopy (EELS) shows that MoS2 encapsulation significantly reduces the plasmon energy of Au nanodiscs compared with their unencapsulated counterparts. Furthermore, first-principles calculations reveal that Au insertion alters the electronic band alignment near the Fermi level of bilayer MoS2. Our results introduce a twisted MoS2-Au-MoS2 heterostructure as a structurally and electronically rich material system and establish twisted epitaxy as a new strategy for moiré engineering and the synthesis of 2D-confined materials with tunable optoelectronic properties.
- 18 February 2026
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 26 (8) , 2932-2939
Atomic-Scale Moiré and Electronic Structure Analysis of Twisted Epitaxial MoS 2 –Au–MoS 2 Heterostructures
Twisted epitaxy enables precise orientation control of nanostructures confined within van der Waals (vdW) gaps. Here, we investigate the moiré and electronic structure of a representative twisted epitaxial system, where Au nanodiscs are grown inside twisted bilayer MoS2 with a 6° interlayer twist, inducing a 3° symmetrical misalignment of Au relative to each MoS2 layer (MoS2-Au-MoS2). Using multislice electron ptychography (MEP), we resolve the three-dimensional "moiré-of-moirés" structure of MoS2-Au-MoS2 with atomic resolution. Electron energy loss spectroscopy (EELS) shows that MoS2 encapsulation significantly reduces the plasmon energy of Au nanodiscs compared with their unencapsulated counterparts. Furthermore, first-principles calculations reveal that Au insertion alters the electronic band alignment near the Fermi level of bilayer MoS2. Our results introduce a twisted MoS2-Au-MoS2 heterostructure as a structurally and electronically rich material system and establish twisted epitaxy as a new strategy for moiré engineering and the synthesis of 2D-confined materials with tunable optoelectronic properties.
- Open Access
- 1 January 2026
- Published by AIP Publishing in APL Materials
- Vol. 14 (1)
Freestanding SrNbO3 membranes as flexible transparent conductors
Synthesizing flexible transparent conducting materials is important for applications in flexible optoelectronics. Metallic oxide membranes offer great promise due to their large elasticity and high transparency. Among them, SrNbO3, a correlated metal, stands out as a promise transparent conducting oxide. However, synthesizing freestanding SrNbO3 membranes poses a challenge because it easily undergoes oxidation, resulting in degraded conductivity. To address this, we utilize epitaxial BaTiO3 capping layers, which effectively prevents SrNbO3 oxidation. We successfully fabricate millimeter-sized transparent conducting BaTiO3/SrNbO3/BaTiO3 membranes using water-soluble sacrificial layers. The obtained SrNbO3 (10 nm thick) membrane exhibits a room temperature sheet resistance (RS) of 174 Ω/sq and a transmittance (T) of 92% at a wavelength of 550 nm. The figure of merit (T10/RS) of this transparent conductor reaches 2.2 × 10−3 Ω−1 in the visible regime, comparable to SrNbO3 films on rigid substrates. These results open possibilities for applications as flexible transparent conductors.
- 1 January 2026
- Published by AIP Publishing in APL Materials
- Vol. 14 (1)
Open AccessFreestanding SrNbO3 membranes as flexible transparent conductors
Synthesizing flexible transparent conducting materials is important for applications in flexible optoelectronics. Metallic oxide membranes offer great promise due to their large elasticity and high transparency. Among them, SrNbO3, a correlated metal, stands out as a promise transparent conducting oxide. However, synthesizing freestanding SrNbO3 membranes poses a challenge because it easily undergoes oxidation, resulting in degraded conductivity. To address this, we utilize epitaxial BaTiO3 capping layers, which effectively prevents SrNbO3 oxidation. We successfully fabricate millimeter-sized transparent conducting BaTiO3/SrNbO3/BaTiO3 membranes using water-soluble sacrificial layers. The obtained SrNbO3 (10 nm thick) membrane exhibits a room temperature sheet resistance (RS) of 174 Ω/sq and a transmittance (T) of 92% at a wavelength of 550 nm. The figure of merit (T10/RS) of this transparent conductor reaches 2.2 × 10−3 Ω−1 in the visible regime, comparable to SrNbO3 films on rigid substrates. These results open possibilities for applications as flexible transparent conductors.
- Open Access
- 20 August 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-11
Strain-induced lead-free morphotropic phase boundary
Enhanced susceptibilities in ferroelectrics often arise near phase boundaries between competing ground states. While chemically-induced phase boundaries have enabled ultrahigh electrical and electromechanical responses in lead-based ferroelectrics, precise chemical tuning in lead-free alternatives, such as (K,Na)NbO3 thin films, remains challenging due to the high volatility of alkali metals. Here, we demonstrate strain-induced morphotropic phase boundary-like polymorphic nanodomain structures in chemically simple, lead-free, epitaxial NaNbO3 thin films. Combining ab initio simulations, thin-film epitaxy, scanning probe microscopy, synchrotron X-ray diffraction, and electron ptychography, we reveal a labyrinthine structure comprising coexisting monoclinic and bridging triclinic phases near a strain-induced phase boundary. The coexistence of energetically competing phases facilitates field-driven polarization rotation and phase transitions, giving rise to a multi-state polarization switching pathway and large enhancements in dielectric susceptibility and tunability across a broad frequency range. Our results open new possibilities for engineering lead-free thin films with enhanced functionalities for next-generation applications.
- 20 August 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-11
Open AccessStrain-induced lead-free morphotropic phase boundary
Enhanced susceptibilities in ferroelectrics often arise near phase boundaries between competing ground states. While chemically-induced phase boundaries have enabled ultrahigh electrical and electromechanical responses in lead-based ferroelectrics, precise chemical tuning in lead-free alternatives, such as (K,Na)NbO3 thin films, remains challenging due to the high volatility of alkali metals. Here, we demonstrate strain-induced morphotropic phase boundary-like polymorphic nanodomain structures in chemically simple, lead-free, epitaxial NaNbO3 thin films. Combining ab initio simulations, thin-film epitaxy, scanning probe microscopy, synchrotron X-ray diffraction, and electron ptychography, we reveal a labyrinthine structure comprising coexisting monoclinic and bridging triclinic phases near a strain-induced phase boundary. The coexistence of energetically competing phases facilitates field-driven polarization rotation and phase transitions, giving rise to a multi-state polarization switching pathway and large enhancements in dielectric susceptibility and tunability across a broad frequency range. Our results open new possibilities for engineering lead-free thin films with enhanced functionalities for next-generation applications.
- 16 January 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (4) , 2991-2997
Fermi Level Equilibration and Charge Transfer at the Exsolved Metal-Oxide Interface
Exsolution is a promising approach for fabricating oxide-supported metal nanocatalysts through redox-driven metal precipitation. A defining feature of exsolved nanocatalysts is their anchored metal-oxide interface, which exhibits exceptional structural stability in (electro)catalysis. However, the electronic interactions at this unique interface remain unclear, despite their known impact on catalytic performance. In this study, we confirm charge transfer between the host oxide and the exsolved metal by demonstrating a two-stage Fermi level (EF) evolution on SrTi0.65Fe0.35O3-δ (STF) during metallic iron (Fe0) exsolution. Combining ambient pressure X-ray photoelectron spectroscopy with theoretical analysis, we show that EF initially rises due to electron doping from oxygen vacancy formation in STF. Subsequently, upon Fe0 precipitation, EF stabilizes and becomes insensitive to further oxygen release in STF, driven by EF equilibration and charge transfer between STF and the exsolved Fe0. These findings highlight the importance of considering electronic metal-support interactions when optimizing exsolved nanocatalysts.
- 16 January 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (4) , 2991-2997
Fermi Level Equilibration and Charge Transfer at the Exsolved Metal-Oxide Interface
Exsolution is a promising approach for fabricating oxide-supported metal nanocatalysts through redox-driven metal precipitation. A defining feature of exsolved nanocatalysts is their anchored metal-oxide interface, which exhibits exceptional structural stability in (electro)catalysis. However, the electronic interactions at this unique interface remain unclear, despite their known impact on catalytic performance. In this study, we confirm charge transfer between the host oxide and the exsolved metal by demonstrating a two-stage Fermi level (EF) evolution on SrTi0.65Fe0.35O3-δ (STF) during metallic iron (Fe0) exsolution. Combining ambient pressure X-ray photoelectron spectroscopy with theoretical analysis, we show that EF initially rises due to electron doping from oxygen vacancy formation in STF. Subsequently, upon Fe0 precipitation, EF stabilizes and becomes insensitive to further oxygen release in STF, driven by EF equilibration and charge transfer between STF and the exsolved Fe0. These findings highlight the importance of considering electronic metal-support interactions when optimizing exsolved nanocatalysts.
- 14 January 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
Molecular H2 as the Reducing Agent in Low-Temperature Oxide Reduction Using Calcium Hydride
Low-temperature synthesis is crucial for advancing sustainable manufacturing and accessing novel metastable phases. Metal hydrides have shown great potential in facilitating the reduction of oxides at low temperatures, yet the underlying mechanism─whether driven by H-, H2, or atomic H─remains unclear. In this study, we employ in situ electrical transport measurements and first-principles calculations to investigate the CaH2-driven reduction kinetics in epitaxial α-Fe2O3 thin films. Intriguingly, samples in direct contact with or separated from CaH2 powders exhibit similar apparent activation energies for H2 reduction, although direct contact significantly increases the reduction rate. These findings indicate that molecular H2 is the dominant reducing species in the low-temperature reduction of oxides using CaH2, with a key aspect of the hydrides' superior reducing power attributed to their ability to eliminate residual moisture. This work underscores the critical role of moisture control in enabling effective low-temperature oxide reduction for advanced material synthesis.
- 14 January 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
Molecular H2 as the Reducing Agent in Low-Temperature Oxide Reduction Using Calcium Hydride
Low-temperature synthesis is crucial for advancing sustainable manufacturing and accessing novel metastable phases. Metal hydrides have shown great potential in facilitating the reduction of oxides at low temperatures, yet the underlying mechanism─whether driven by H-, H2, or atomic H─remains unclear. In this study, we employ in situ electrical transport measurements and first-principles calculations to investigate the CaH2-driven reduction kinetics in epitaxial α-Fe2O3 thin films. Intriguingly, samples in direct contact with or separated from CaH2 powders exhibit similar apparent activation energies for H2 reduction, although direct contact significantly increases the reduction rate. These findings indicate that molecular H2 is the dominant reducing species in the low-temperature reduction of oxides using CaH2, with a key aspect of the hydrides' superior reducing power attributed to their ability to eliminate residual moisture. This work underscores the critical role of moisture control in enabling effective low-temperature oxide reduction for advanced material synthesis.
- 22 December 2023
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2023-02 (46) , 3231
(Invited) Controlling Metal Exsolution on Oxides By External Drivers – Role of Elastic Strain and Ion Irradiation
Exsolution is an effective approach to fabricating oxide-supported metal nanoparticle catalysts via phase precipitation out of a host oxide. A fundamental understanding and control of the exsolution kinetics are needed to engineer exsolved nanoparticles to obtain higher catalytic activity toward clean energy and fuel conversion. Since oxygen release via oxygen vacancy formation in the host oxide is behind oxide reduction and metal exsolution, we hypothesize that the kinetics of metal exsolution should depend on the kinetics of oxygen release. In this work, we probe the surface exsolution kinetics both experimentally and theoretically using thin-film perovskite oxide model systems, show its relation to the oxygen evolution kinetics. We also tune defect formation and the resulting metal exsolution, by external drivers including elastic strain and ion irradiation. Using both of these external drivers, we couple to the formation of point defects and defect clusters, that serve as nucleation sites for nanoparticle exsolution. As a result, we can controllably tune size, density, composition and position of the exsolved metal nanoparticles.
- 22 December 2023
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2023-02 (46) , 3231
(Invited) Controlling Metal Exsolution on Oxides By External Drivers – Role of Elastic Strain and Ion Irradiation
Exsolution is an effective approach to fabricating oxide-supported metal nanoparticle catalysts via phase precipitation out of a host oxide. A fundamental understanding and control of the exsolution kinetics are needed to engineer exsolved nanoparticles to obtain higher catalytic activity toward clean energy and fuel conversion. Since oxygen release via oxygen vacancy formation in the host oxide is behind oxide reduction and metal exsolution, we hypothesize that the kinetics of metal exsolution should depend on the kinetics of oxygen release. In this work, we probe the surface exsolution kinetics both experimentally and theoretically using thin-film perovskite oxide model systems, show its relation to the oxygen evolution kinetics. We also tune defect formation and the resulting metal exsolution, by external drivers including elastic strain and ion irradiation. Using both of these external drivers, we couple to the formation of point defects and defect clusters, that serve as nucleation sites for nanoparticle exsolution. As a result, we can controllably tune size, density, composition and position of the exsolved metal nanoparticles.
- Open Access
- 25 September 2023
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 16 (11) , 5464-5478
Ion irradiation to control size, composition and dispersion of metal nanoparticle exsolution
In this research, we highlight ion beam irradiation as an effective external stimulus for precisely tuning the size, density, composition, and spatial distribution of exsolved nanoparticles within a wide range of oxide materials.
- 25 September 2023
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 16 (11) , 5464-5478
Open AccessIon irradiation to control size, composition and dispersion of metal nanoparticle exsolution
In this research, we highlight ion beam irradiation as an effective external stimulus for precisely tuning the size, density, composition, and spatial distribution of exsolved nanoparticles within a wide range of oxide materials.