Ali Hussain
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Ali Hussain has a total of 123 co-authors. Here are the top co-authors by number of shared publications:
- Adnan Maqbool
Department of Metallurgical and Materials Engineering, University of Engineering and Technology (UET), Lahore, Pakistan
22 shared publications - Jamil Ur Rahman
School of Advanced Materials Engineering, Changwon National University, Gyeongnam 641-773, Republic of Korea
21 shared publications - Chang Won Ahn
Department of Physics and EHSRC, University of Ulsan, Ulsan, Republic of Korea
20 shared publications - Myong-Ho Kim
School of Materials Science and Engineering, Changwon National University, Gyeongnam, Republic of Korea
16 shared publications Tae Kwon Song
School of Advanced Materials Engineering, Changwon National University, Republic of Korea
15 shared publications- Aman Ullah
Department of Physics and Energy Harvest-Storage Research Center, University of Ulsan, Ulsan 680-749, Republic of Korea
13 shared publications
Latest Publications
- 5 November 2025
- Published by Springer Nature in Applied Physics A
- Vol. 131 (12) , 1-14
Cinnamon extract incorporated green synthesis of ZnO/Fe2O3 evolving ZnFe2O4 for photo- and electro-chemical utility in catalytic applications
- 5 November 2025
- Published by Springer Nature in Applied Physics A
- Vol. 131 (12) , 1-14
Cinnamon extract incorporated green synthesis of ZnO/Fe2O3 evolving ZnFe2O4 for photo- and electro-chemical utility in catalytic applications
- Open Access
- 19 April 2025
- Published by IntechOpen
Ferroelasticity in Ferroic Materials
The macroscopic properties of ferroic materials are well-known to be influenced by their underlying domain dynamics. In ferroelectric ceramics, domain structures can be categorized into two main types: ferroelectric domains, associated with spontaneous polarization, and ferroelastic domains, linked to spontaneous strain. Currently, ferroelectric domains and their dynamic behaviors have been extensively studied, as they are recognized to directly influence the functionality of ferroelectric ceramics and determine the output performance of electronic devices. In contrast, the understanding of ferroelastic domain dynamics remains limited, primarily because ferroelastic deformation is only activated under mechanical loads of sufficient magnitude. Despite this, ferroelastic properties in ferroelectric ceramics must be considered in certain applications, such as piezoelectric multilayer actuators that are typically subjected to compressive preloads and high blocking forces. Under these loading conditions, ferroelastic deformation induces nonlinear behaviors and remanent strain, leading to degraded performance of ferroelectric ceramics and reduced stability and reliability of electronic devices. For this reason, deep understanding of ferroelasticity and deciphering mechanisms behind ferroelastic deformation in ferroelectric materials is essential for advancing material design and optimization to meet diverse application needs. This chapter explores the current understanding of ferroelastic properties and deformation mechanisms in representative ferroelectric materials under various loading conditions. Additionally, it highlights toughening effect related to ferroelasticity in ferroelectric materials that have been discovered in recent years. This knowledge could provide valuable insights for the development of the next generation of ferroic materials for a wide range of technological applications.
- 19 April 2025
- Published by IntechOpen
Open AccessFerroelasticity in Ferroic Materials
The macroscopic properties of ferroic materials are well-known to be influenced by their underlying domain dynamics. In ferroelectric ceramics, domain structures can be categorized into two main types: ferroelectric domains, associated with spontaneous polarization, and ferroelastic domains, linked to spontaneous strain. Currently, ferroelectric domains and their dynamic behaviors have been extensively studied, as they are recognized to directly influence the functionality of ferroelectric ceramics and determine the output performance of electronic devices. In contrast, the understanding of ferroelastic domain dynamics remains limited, primarily because ferroelastic deformation is only activated under mechanical loads of sufficient magnitude. Despite this, ferroelastic properties in ferroelectric ceramics must be considered in certain applications, such as piezoelectric multilayer actuators that are typically subjected to compressive preloads and high blocking forces. Under these loading conditions, ferroelastic deformation induces nonlinear behaviors and remanent strain, leading to degraded performance of ferroelectric ceramics and reduced stability and reliability of electronic devices. For this reason, deep understanding of ferroelasticity and deciphering mechanisms behind ferroelastic deformation in ferroelectric materials is essential for advancing material design and optimization to meet diverse application needs. This chapter explores the current understanding of ferroelastic properties and deformation mechanisms in representative ferroelectric materials under various loading conditions. Additionally, it highlights toughening effect related to ferroelasticity in ferroelectric materials that have been discovered in recent years. This knowledge could provide valuable insights for the development of the next generation of ferroic materials for a wide range of technological applications.
- 28 September 2024
- Published by Elsevier in Scripta Materialia
- Vol. 255
Effect of A-site non-stoichiometry in NaNbO3 ceramics
- 28 September 2024
- Published by Elsevier in Scripta Materialia
- Vol. 255
Effect of A-site non-stoichiometry in NaNbO3 ceramics
- 10 September 2017
- Published by Taylor & Francis in Ferroelectrics
- Vol. 517 (1) , 97-103
Phase transition and energy storage properties of BaTiO3-modified Bi0.5(Na0.8K0.2)0.5TiO3 ceramics
Perovskite type (1-x)Bi0.5(Na0.8K0.2)0.5TiO3–xBaTiO3 (x = 0.0–0.05) ceramics were prepared by conventional solid state reaction method. X-ray diffraction revealed a phase transition from rhombohedral and tetragonal mixed phase to tetragonal phase at x = 0.05. The signature of lattice disorder generated due of differences in ionic radius of cations at A-site is analyses using Raman spectra. The broadening of dielectric peak and its frequency dependence behaviour near Td is considered as relaxor behaviour of these ceramics. Addition of BT, reduces remnant polarization and hysteresis loss is suggested the possibility of energy storage ability of these ceramics.
- 10 September 2017
- Published by Taylor & Francis in Ferroelectrics
- Vol. 517 (1) , 97-103
Phase transition and energy storage properties of BaTiO3-modified Bi0.5(Na0.8K0.2)0.5TiO3 ceramics
Perovskite type (1-x)Bi0.5(Na0.8K0.2)0.5TiO3–xBaTiO3 (x = 0.0–0.05) ceramics were prepared by conventional solid state reaction method. X-ray diffraction revealed a phase transition from rhombohedral and tetragonal mixed phase to tetragonal phase at x = 0.05. The signature of lattice disorder generated due of differences in ionic radius of cations at A-site is analyses using Raman spectra. The broadening of dielectric peak and its frequency dependence behaviour near Td is considered as relaxor behaviour of these ceramics. Addition of BT, reduces remnant polarization and hysteresis loss is suggested the possibility of energy storage ability of these ceramics.
- Open Access
- 24 August 2016
- Published by IntechOpen
Grain-Oriented Bi0.5Na0.5TiO3–BaZrO3 Piezoelectric Ceramics
Grain-Oriented Bi0.5Na0.5TiO3–BaZrO3 Piezoelectric Ceramics | InTechOpen, Published on: 2016-08-24. Authors: Ali Hussain and Myong-Ho Kim
- 24 August 2016
- Published by IntechOpen
Open AccessGrain-Oriented Bi0.5Na0.5TiO3–BaZrO3 Piezoelectric Ceramics
Grain-Oriented Bi0.5Na0.5TiO3–BaZrO3 Piezoelectric Ceramics | InTechOpen, Published on: 2016-08-24. Authors: Ali Hussain and Myong-Ho Kim
- Open Access
- 9 December 2015
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 5 (125) , 103315
Correction: Structure–property relationship in lead-free A- and B-site co-doped Bi0.5(Na0.84K0.16)0.5TiO3–SrTiO3 incipient piezoceramics
Correction for ‘Structure–property relationship in lead-free A- and B-site co-doped Bi0.5(Na0.84K0.16)0.5TiO3–SrTiO3 incipient piezoceramics’ by Rizwan Ahmed Malik et al., RSC Adv., 2015, 5, 96953–96964.
- 9 December 2015
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 5 (125) , 103315
Open AccessCorrection: Structure–property relationship in lead-free A- and B-site co-doped Bi0.5(Na0.84K0.16)0.5TiO3–SrTiO3 incipient piezoceramics
Correction for ‘Structure–property relationship in lead-free A- and B-site co-doped Bi0.5(Na0.84K0.16)0.5TiO3–SrTiO3 incipient piezoceramics’ by Rizwan Ahmed Malik et al., RSC Adv., 2015, 5, 96953–96964.
- Open Access
The Effect of Niobium Doping on the Electrical Properties of 0.4(Bi0.5K0.5)TiO3-0.6BiFeO3 Lead-Free Piezoelectric Ceramics
Ceramics in the system (Bi0.5K0.5)TiO3-BiFeO3 have good electromechanical properties and temperature stability. However, the high conductivity inherent in BiFeO3-based ceramics complicates measurement of the ferroelectric properties. In the present work, doping with niobium (Nb) is carried out to reduce the conductivity of (Bi0.5K0.5)TiO3-BiFeO3. Powders of composition 0.4(K0.5Bi0.5)Ti1−xNbxO3-0.6BiFe1−xNbxO3 (x = 0, 0.01 and 0.03) are prepared by the mixed oxide method and sintered at 1050 °C for 1 h. The effect of Nb doping on the structure is examined by X-ray diffraction. The microstructure is examined by scanning electron microscopy. The variation in relative permittivity with temperature is measured using an impedance analyzer. Ferroelectric properties are measured at room temperature using a Sawyer Tower circuit. Piezoelectric properties are measured using a d33 meter and a contact type displacement sensor. All the samples have high density, a rhombohedral unit cell and equiaxed, micron-sized grains. All the samples show relaxor-like behavior. Nb doping causes a reduction in conductivity by one to two orders of magnitude at 200 °C. The samples have narrow P-E loops reminiscent of a linear dielectric. The samples all possess bipolar butterfly S-E loops characteristic of a classic ferroelectric material. Nb doping causes a decrease in d33 and Smax/Emax.
Open AccessThe Effect of Niobium Doping on the Electrical Properties of 0.4(Bi0.5K0.5)TiO3-0.6BiFeO3 Lead-Free Piezoelectric Ceramics
Ceramics in the system (Bi0.5K0.5)TiO3-BiFeO3 have good electromechanical properties and temperature stability. However, the high conductivity inherent in BiFeO3-based ceramics complicates measurement of the ferroelectric properties. In the present work, doping with niobium (Nb) is carried out to reduce the conductivity of (Bi0.5K0.5)TiO3-BiFeO3. Powders of composition 0.4(K0.5Bi0.5)Ti1−xNbxO3-0.6BiFe1−xNbxO3 (x = 0, 0.01 and 0.03) are prepared by the mixed oxide method and sintered at 1050 °C for 1 h. The effect of Nb doping on the structure is examined by X-ray diffraction. The microstructure is examined by scanning electron microscopy. The variation in relative permittivity with temperature is measured using an impedance analyzer. Ferroelectric properties are measured at room temperature using a Sawyer Tower circuit. Piezoelectric properties are measured using a d33 meter and a contact type displacement sensor. All the samples have high density, a rhombohedral unit cell and equiaxed, micron-sized grains. All the samples show relaxor-like behavior. Nb doping causes a reduction in conductivity by one to two orders of magnitude at 200 °C. The samples have narrow P-E loops reminiscent of a linear dielectric. The samples all possess bipolar butterfly S-E loops characteristic of a classic ferroelectric material. Nb doping causes a decrease in d33 and Smax/Emax.
- 30 October 2015
- Published by Taylor & Francis in Ferroelectrics
- Vol. 488 (1) , 23-31
Structural, Ferroelectric and Field-Induced Strain Response of Nb-Modified (Bi0.5Na0.5)TiO3-SrZrO3Lead-Free Ceramics
Lead-free ceramics system of 0.96[Bi0.5Na0.5Ti(1−x)NbxO3]-0.04SrZrO3 BNT-SZ-Nb100x (with Nb100x = 0–4) were prepared by a solid-state reaction method. X-ray diffraction analysis revealed the formation of pure perovskite phase with x ≤ 0.03. The temperature dependence of dielectric curves showed that maximum dielectric constant temperature (Tm) shifted towards lower temperatures and the curves become more diffuse with increasing Nb doping. Ferroelectric curves indicated a disruption of ferroelectric order upon Nb addition. From Nb0 to Nb2 ceramics, maximum values for the field-induced strain (Smax) was enhanced from 0.09 to 0.22%. The corresponding normalized strain (Smax/Emax) was increased from 125 to 315 pm/V.
- 30 October 2015
- Published by Taylor & Francis in Ferroelectrics
- Vol. 488 (1) , 23-31
Structural, Ferroelectric and Field-Induced Strain Response of Nb-Modified (Bi0.5Na0.5)TiO3-SrZrO3Lead-Free Ceramics
Lead-free ceramics system of 0.96[Bi0.5Na0.5Ti(1−x)NbxO3]-0.04SrZrO3 BNT-SZ-Nb100x (with Nb100x = 0–4) were prepared by a solid-state reaction method. X-ray diffraction analysis revealed the formation of pure perovskite phase with x ≤ 0.03. The temperature dependence of dielectric curves showed that maximum dielectric constant temperature (Tm) shifted towards lower temperatures and the curves become more diffuse with increasing Nb doping. Ferroelectric curves indicated a disruption of ferroelectric order upon Nb addition. From Nb0 to Nb2 ceramics, maximum values for the field-induced strain (Smax) was enhanced from 0.09 to 0.22%. The corresponding normalized strain (Smax/Emax) was increased from 125 to 315 pm/V.
- 29 October 2015
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 5 (117) , 96953-96964
Structure–property relationship in lead-free A- and B-site co-doped Bi0.5(Na0.84K0.16)0.5TiO3–SrTiO3incipient piezoceramics
In this work, a phase diagram of A- and B-site co-substituted 0.96[{Bi0.5 (Na0.84K0.16)}1−x−yLixMgy(Ti1−zNbz)O3]–0.04SrTiO3 (abbreviated as LMN-doped BNKT–ST), where x, y and z = 0.00–0.030, was schematically constructed on the basis of crystal structure and electromechanical, dielectric and piezoelectric properties. The underlying mechanism of the compositionally-induced non-ergodic (NR) to ergodic relaxor (ER) phase transition was explored, and emphasis was given on relating the chemically-induced polymorphic structural phase transition to the dynamics of polar nano-regions (PNRs) and their random fields, which strongly affect the dielectric, ferroelectric, piezoelectric and field-induced strain properties of the investigated system. X-ray diffraction patterns revealed that LMN doping resulted in a transition from coexistence of rhombohedral and tetragonal phases to a pseudocubic phase. Both the dielectric constant and the ferroelectric–relaxor transition (TF–R ∼ 100 °C) temperature decreased with an increase in LMN content. The piezoelectric and ferroelectric responses of the BNKT–ST ceramics were significantly decreased by the addition of LMN. However, the destabilization of the piezoelectric and ferroelectric properties was accompanied by significant enhancements in the bipolar and unipolar strains. A large electric-field-induced strain (S = 0.28%) and a corresponding dynamic piezoelectric constant (Smax/Emax) of 560 pm V−1 were observed under the driving field of 5 kV mm−1 when 1.5 mol% LMN was substituted on respective sites. This significant strain enhancement at this composition, with LMN = 0.015, may be attributed to both the field-induced reversible structural transition and the compositionally-induced NR to ER phase transition. The composition- and temperature-dependence of the energy storage density (W) were studied to demonstrate the practicability of the LMN-doped BNKT–ST. It was found that the addition of LMN enhanced the difference between maximum polarization and remnant polarization, resulting in an improvement of the energy storage properties. For the composition with LMN = 0.020, a nearly temperature-invariant large recoverable energy density (W = 0.70 J cm−3) was achieved under 5.5 kV mm−1 in the wide temperature range of 100–150 °C. These properties indicate that the synthesized system might be a promising lead-free candidate for actuator and energy storage capacitor applications.
- 29 October 2015
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 5 (117) , 96953-96964
Structure–property relationship in lead-free A- and B-site co-doped Bi0.5(Na0.84K0.16)0.5TiO3–SrTiO3incipient piezoceramics
In this work, a phase diagram of A- and B-site co-substituted 0.96[{Bi0.5 (Na0.84K0.16)}1−x−yLixMgy(Ti1−zNbz)O3]–0.04SrTiO3 (abbreviated as LMN-doped BNKT–ST), where x, y and z = 0.00–0.030, was schematically constructed on the basis of crystal structure and electromechanical, dielectric and piezoelectric properties. The underlying mechanism of the compositionally-induced non-ergodic (NR) to ergodic relaxor (ER) phase transition was explored, and emphasis was given on relating the chemically-induced polymorphic structural phase transition to the dynamics of polar nano-regions (PNRs) and their random fields, which strongly affect the dielectric, ferroelectric, piezoelectric and field-induced strain properties of the investigated system. X-ray diffraction patterns revealed that LMN doping resulted in a transition from coexistence of rhombohedral and tetragonal phases to a pseudocubic phase. Both the dielectric constant and the ferroelectric–relaxor transition (TF–R ∼ 100 °C) temperature decreased with an increase in LMN content. The piezoelectric and ferroelectric responses of the BNKT–ST ceramics were significantly decreased by the addition of LMN. However, the destabilization of the piezoelectric and ferroelectric properties was accompanied by significant enhancements in the bipolar and unipolar strains. A large electric-field-induced strain (S = 0.28%) and a corresponding dynamic piezoelectric constant (Smax/Emax) of 560 pm V−1 were observed under the driving field of 5 kV mm−1 when 1.5 mol% LMN was substituted on respective sites. This significant strain enhancement at this composition, with LMN = 0.015, may be attributed to both the field-induced reversible structural transition and the compositionally-induced NR to ER phase transition. The composition- and temperature-dependence of the energy storage density (W) were studied to demonstrate the practicability of the LMN-doped BNKT–ST. It was found that the addition of LMN enhanced the difference between maximum polarization and remnant polarization, resulting in an improvement of the energy storage properties. For the composition with LMN = 0.020, a nearly temperature-invariant large recoverable energy density (W = 0.70 J cm−3) was achieved under 5.5 kV mm−1 in the wide temperature range of 100–150 °C. These properties indicate that the synthesized system might be a promising lead-free candidate for actuator and energy storage capacitor applications.
- 1 October 2015
- Published by Korean Physical Society in Journal of the Korean Physical Society
- Vol. 67 (7) , 1240-1245
Effect of donor doping on the ferroelectric and the piezoelectric properties of lead-free 0.97(Bi0.5Na0.5Ti1−x Nb x )O3-0.03BaZrO3 ceramics
- 1 October 2015
- Published by Korean Physical Society in Journal of the Korean Physical Society
- Vol. 67 (7) , 1240-1245
Effect of donor doping on the ferroelectric and the piezoelectric properties of lead-free 0.97(Bi0.5Na0.5Ti1−x Nb x )O3-0.03BaZrO3 ceramics