Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Hongjun Guo has a total of 19 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    The Application of the Foam Technology to the Dust Control for Reducing the Dust Injury of Coal Mines

    by Ming Ji, Zhongguang Sun, Hongjun Guo

    Mine dust is one of the main disasters that threatens the safety of coal mine production, deteriorates the underground working environment and induces various occupational diseases. Based on the harm of mine dust identified and the current domestic and foreign dust-proof technology, the technical research of the foam dust reduction is reviewed; the advantages and disadvantages of foam dust reduction are also discussed. According to the experimental exploration and the study of foam flow characteristics, the process of foam device and foam nozzle separation was adopted, and some site tests were conducted in fully mechanized mining and excavation working faces in Zhangcun, Shanjiaoshu and Jinjia coal mines. The foam technology led to a 59.5% dust removal efficiency in Zhangcun coal mine, which is much higher than the dust removal efficiency of the water spray dust reduction. The efficiency of total mine dust in Shanjiaoshu coal mine reached as high as 72%, and the efficiency of respirable mine dust reached 67%. Compared with the circumstance with no dust-control measure, the average density of the total mine dust in Jinjia coal mine decreased by 22.75~32.95% using foam technology. The results show that the use of the foam to inhibit the transformation of mine dust from the source of dust production to the floating state and the efficiency of dust control is greatly improved. This method can effectively reduce the mine dust density in underground mining and excavation working faces, clean the working environments, and guarantee the health of miners. The research results are of great significance for improving the production conditions of mining and excavating face and building green mines and standardized mines. Moreover, foam technology for dust control has been widely used in coal mines.


  • Open Access

    A Study on the Effects of Loading Axial Pressure Rate on Coal Mechanical Properties and Energy Evolution Law

    by Hongjun Guo, Zhongguang Sun, Ming Ji, Dapeng Liu, Lihui Nian, Yongfeng Wu

    Due to the unique nature of the coal mining industry, safety is always one highly upheld premise of high production and high efficiency. According to the stress adjustment characteristics of the surrounding rocks in roadway excavation under a nondisruptive environment, the stress paths of unloading confining pressure and loading axial pressure were designed creatively and vividly, and the coal mechanical properties and energy evolution law under different loading axial pressure rates were studied through a series of experiments. As the loading axial pressure rate increases, the mechanical parameters at the time of coal failure show a nonlinear increase in the peak strength, the confining pressure, and the axial strain, while the variation laws of lateral strain and volumetric strain are not obvious. In addition, the failure mode transfers from the brittle failure to the ductile failure. In terms of energy, the positive work done by the axial pressure, the total work, and the elastic strain energy tend to increase nonlinearly, while the negative work done by the confining pressure and the plastic strain energy increase conversely. The elastic strain energy conversion rate increases logarithmically, indicating that a higher loading axial pressure rate tends to increase the probability and strength of coal instantaneous failure and subsequent dynamic behaviors. The research results reveal that providing an appropriate pressure relief and timely support after the roadway excavation in the actual production process can effectively reduce the energy level of the environment at the location of the surrounding rock support system, which is conducive to the roadway support and the surrounding rock stability control. Furtherly, it has important reference value for the roadway excavation and other underground engineering excavation and support operations and is of great significance to promote the development of deep resources.


  • Open Access

    An Investigation on the Impact of Unloading Rate on Coal Mechanical Properties and Energy Evolution Law

    by Hongjun Guo, Zhongguang Sun, Ming Ji, Yongfeng Wu, Lihui Nian

    In order to further explore the relationship between the excavation speed and the damage of surrounding rocks and dynamic manifestation, the stress paths of unloading confining pressure and loading axial pressure were designed based on the changes in the roadway surrounding rock stress in this study. Additionally, the mechanical properties and energy evolution law of the coal body were investigated under various unloading rates. As the unloading rate increased, the mechanical properties of the coal body including the failure strength, the confining pressure, the axial strain, and horizontal strain tended to decrease at the rupture stage, while the volume strain and the elastic modulus increased, indicating that the rupture form evolved from the ductile failure to brittle failure. Regarding the energy, the axial pressure did positive work while the confining pressure did negative work, with the total work and the stored elastic strain energy decreasing. In addition, with the increase of the dissipation energy, the elastic strain energy conversion rate decreased linearly, indicating that the high unloading rate increased the possibility of dynamic disasters induced by the instantaneous brittle rupture of the coal body. On the other hand, due to the low releasable elastic strain energy stored in the coal body, the strength and probability of subsequent dynamic manifestation of coal body destruction were reduced. Therefore, increasing the excavation speed in a controllable way can benefit the safety of mining.


  • Open Access

    An Experimental Research on Surrounding Rock Unloading during Solid Coal Roadway Excavation

    by Hongjun Guo, Ming Ji, Dapeng Liu, Mengxi Liu, Gaofeng Li, Jingjing Chen

    In order to further explore the deformation and failure essence of the deep coal body, based on the characteristics of surrounding rock stress adjustment before and after solid coal roadway excavation, an experiment of unloading confining pressure and loading axial pressure of the coal body was designed and conducted in this study. Based on test results, the failure mechanics and energy characteristics of the coal body were analyzed through experiments. Rapid unloading is considered a key factor contributing to lateral deformation and expansion failure, which exacerbates the deterioration of coal body and reduces the deformation energy storage capacity of coal. On the other hand, the larger loading rate tends to shorten the accumulation time of microcracks and cause damage to the coal body, resulting in strengthening the coal body and improving energy storage. Under the circumstance that the coal body is destroyed, the conversion rates of the internal deformation energy and dissipated energy are more significantly affected by unloading rate. The increasing unloading rate and rapid decreases in the conversion rate of deformation energy make the coal body more vulnerable to damage. Under the same stress conditions, the excavation unloading is more likely to deform, destroy, or even throw the coal than the experiment unloading. In order to reduce or avoid the occurrence of deep roadway excavation accidents, the understanding of the excavation unloading including possible influencing factors and the monitoring of the surrounding rock stress and energy during the excavation disturbance should be strengthened. It can be used as the basis for studying the mechanism of deformation and failure of coal and rock and dynamic disasters in deep mines, as well as the prediction, early warning, prevention, and control of related dynamic disasters.


  • Open Access

    Research on Key Factors Influencing Surface Subsidence of Paste Backfilling Mining in Thick Coal Seam of Deep Mine

    by Meng Zhang, Hui He, Xin Jin, Yonglong Qu, Hongjun Guo

    The research on the key factors of surface subsidence in paste backfilling mining of thick coal seam in deep mine is a complex system engineering, which involves mining, backfilling, support, subsidence, safety, and other aspects. At present, there is no systematic research on the key factors of surface subsidence in paste backfilling mining of thick coal seam more than 6 meters in a deep mine. In this paper, field research, laboratory experiments, theoretical analysis, and other research methods are used to carry out the research about 3# coal seam under buildings in the Lu’an area. The main conclusions are as follows: through the construction of the fuzzy extension model of surface subsidence in paste backfilling mining, five types of surface subsidence are obtained, including overburden structure, roof subsidence before backfilling, nonbackfilling account, the strength of filling body, and backfilling technology. It is the key factor to control the surface subsidence; the optimization measures are given to provide a reference for the reasonable design of paste backfilling mining in other working faces. The research conclusion has a certain reference value for solving a series of problems such as coal resources under buildings, solid waste disposal, controlling strata and surface movement, improving the recovery rate of mine resources, and extending the service life of mine.


  • Open Access

    Energy Variation Law and Rockburst Characteristics of Coal under Cyclic Loading

    by Hongjun Guo, Ming Ji, Dapeng Liu, Mengxi Liu, Gaofeng Li, Jingjing Chen, Hongjie Chen

    Coal mining involves numerous challenges and safety risks owing to the complex engineering properties of coal bodies, which include discontinuities, heterogeneity, and anisotropy. In this paper, the strain energy during the coal deformation process is redivided in combination with cyclic loading and unloading tests to determine the energy evolution law and discuss the rockburst tendency characteristics. The results show that the elastic strain energy, and particularly the base‐material strain energy, consistently dominates during the energy adjustment process, which is an important indicator of rockburst tendency. The elastic energy index and rebound deformation index also show that moderate plastic deformation (e.g., crack expansion and local penetration) can reduce the rockburst tendency level and prevent rockburst accidents. On the basis of the obtained results, precracking and pressure relief measures of blasting are adopted on site in advance of the working face, and good safety and economic benefits are achieved. These findings, thus, provide an important engineering reference for mines under similar conditions.


  • Open Access

    The Influence of Fracture Strain Energy on the Burst Tendency of Coal Seams and Field Application

    by Hongjun Guo, Ming Ji, Dapeng Liu, Mengxi Liu, Weisheng Zhao

    Coal is typically considered a special engineering rock mass because of its low strength, high internal fracture development, good permeability, and random distribution of microparticles and fractures. The results of cyclic loading and unloading tests indicate that the strain energy during the coal deformation process can be divided into three parts: plastic strain energy; fracture strain energy; and base‐material strain energy. The energy composition ratio differs depending on coal strength. Lower proportions of fracture strain energy are associated with higher elastic energy indexes, and there is a negative correlation between fracture strain energy and other coal burst tendency indexes. The results were applied on the 4206 isolated island working face of coal mine A in Yan’an, Shanxi, China, yielding good benefits. The findings presented here provide a theoretical basis for understanding the principle of coal seam bursting and guidance for reducing burst risks.


  • Open Access

    Transition Threshold of Granite Mechanical Characteristics at High Temperature

    by Hongjun Guo, Ming Ji, Dapeng Liu

    No unified criterion exists for the transition threshold of rock mechanical characteristics. We combine rock stress‐strain curves to propose an increment ratio of axial pressure based on uniaxial compression tests on granite at high temperature. The behavior of the increment ratio of strain, elastic modulus, Poisson’s ratio, and energy with axial pressure is analyzed, and the following conclusions are drawn. (1) High temperatures aggravate rock deterioration, reduce failure strength, and enhance ductility characteristics. (2) Under loading, the compression‐to‐elasticity and elasticity‐to‐plasticity transition thresholds for rock occur, respectively, at 20%–35% and 75%–80% stress levels at temperatures of 25–800°C. (3) The source data for calculating rock deformation parameters or unloading points for unloading tests can be selected over the stress level range of 35%–75%.


  • Open Access

    Influence of in-situ rock stress on the stability of roadway surrounding rock: a case study

    by Ming Ji, Hongjun Guo

    In-situ rock stress was measured in the development roadway of Gucheng coal mine at +420 m level by using the stress relief method of hollow inclusion. The results show that the first principal stress was the vertical stress, the maximum horizontal principal stresses were distributed in the range of N10°E and N20°E, and the average side pressure coefficient was 0.83. There was a large difference between the maximum horizontal principal stress and the minimum horizontal principal stress, and the calculated average ratio was 2.02. A spatial stress conversion model of the horizontal roadway based on the measured in-situ rock stresses was built, and the distribution laws of stress and displacement of the surrounding rock of the roadway were analyzed in depth along the changing radial direction. According to the Mohr–Coulomb failure criterion, an asymmetric surrounding rock plastic zone was obtained and the plastic failure radius was 5.0 m. Considering the roadway-surrounding rock differential control, the stronger support in the risk areas was practiced and validated. The work in this paper would provide some ideas for the design and optimization of the support parameters for roadway engineering.


  • Open Access

    Elastic-Plastic Threshold and Rational Unloading Level of Rocks

    by Ming Ji, Hongjun Guo

    During loading and unloading test, various rocks manifest different stress values of elastic-plastic transformation. This study proposes to include axial pressure increment ratio in the conventional triaxial compression test to evaluate different variables (nominal elastic modulus, nominal Poisson’s ratio, strain, and energy). The relationships among various factors including variables, the stress level of initial confining stress and axial pressures, were analyzed by analyzing the stress–strain plot record obtained from testing various rocks. The extreme value point of the deformation parameter, also known as the elastic-plastic threshold, was analyzed. In addition, the elastic-plastic thresholds were later used as unloading points during the unloading tests. Under the same confining condition, different rocks demonstrated different unloading levels. Furthermore, a linear correlation was observed between unloading levels and changing confining pressures, and the gradient is mainly related to the types of rocks. During the unloading tests of rocks, the rational unloading level is recommended to be no higher than the stress level at the elastic-plastic threshold under the corresponding confining pressure.