David C. Young
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
David C. Young has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- Daniel Tomasz Gryko
Institute of Organic Chemistry, Polish Academy of Sciences, Kasprzaka 44/52, 01-224 Warsaw, Poland
3 shared publications - Paul E. Kruger
MacDiarmid Institute for Advanced Materials and Nanotechnology, School of Physical and Chemical Sciences, University of Canterbury, Private Bag 4800, Christchurch 8140, New Zealand
3 shared publications - Benjamin H. Wilson
Department of Chemical Sciences Bernal Institute University of Limerick Limerick V94 T9PX Republic of Ireland
2 shared publications - Corine Mathonière
Univ. Bordeaux, CNRS, Centre de Recherche Paul Pascal, CRPP, UMR 5031
2 shared publications - Denis Jacquemin
Nantes Université, CNRS, CEISAM UMR 6230
2 shared publications - Jas. S. Ward
University of Jyväskylä, Department of Chemistry, 40014 Jyväskylä, Finland
2 shared publications
Latest Publications
- 3 January 2025
- Published by Royal Society of Chemistry (RSC) in Environmental Science: Nano
- Vol. 12 (2) , 1638-1656
Catalytic performance of electronic waste-derived gold nanoparticles for the reduction of p -nitrophenol
Gold nanoparticles synthesised from low concentration e-waste leachate solutions display superior catalytic performance for the reduction of p -nitrophenol compared to gold nanoparticles derived from highly refined sources.
- 3 January 2025
- Published by Royal Society of Chemistry (RSC) in Environmental Science: Nano
- Vol. 12 (2) , 1638-1656
Catalytic performance of electronic waste-derived gold nanoparticles for the reduction of p -nitrophenol
Gold nanoparticles synthesised from low concentration e-waste leachate solutions display superior catalytic performance for the reduction of p -nitrophenol compared to gold nanoparticles derived from highly refined sources.
- 9 December 2021
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 61 (4) , e202113837
Self‐Assembly Synthesis of a [2]Catenane CoII Single‐Molecule Magnet
We describe herein the self‐assembly synthesis of an octanuclear CoII [2]catenane {[Co4(H2L)6]216+} formed by the mechanical interlocking of two {[Co4(H2L)6]8+} rectangles of unprecedented topology. Subtle manipulation of the synthetic conditions allows the isolation of a mixed‐valence [Co2III/Co2II]10+ non‐catenated rectangle. The CoII centers in the [2]catenane exhibit slow relaxation of their magnetic moment, i. e. single‐molecule magnet properties, dominated by quantum tunneling and Raman relaxation processes. This work shows that metallo‐supramolecular chemistry can precisely control the organization of single‐molecule magnets in topologically complex arrangements.
- 9 December 2021
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 61 (4) , e202113837
Self‐Assembly Synthesis of a [2]Catenane CoII Single‐Molecule Magnet
We describe herein the self‐assembly synthesis of an octanuclear CoII [2]catenane {[Co4(H2L)6]216+} formed by the mechanical interlocking of two {[Co4(H2L)6]8+} rectangles of unprecedented topology. Subtle manipulation of the synthetic conditions allows the isolation of a mixed‐valence [Co2III/Co2II]10+ non‐catenated rectangle. The CoII centers in the [2]catenane exhibit slow relaxation of their magnetic moment, i. e. single‐molecule magnet properties, dominated by quantum tunneling and Raman relaxation processes. This work shows that metallo‐supramolecular chemistry can precisely control the organization of single‐molecule magnets in topologically complex arrangements.
- 9 December 2021
- Published by Wiley in Angewandte Chemie
- Vol. 134 (4)
Self‐Assembly Synthesis of a [2]Catenane CoII Single‐Molecule Magnet
We describe herein the self‐assembly synthesis of an octanuclear CoII [2]catenane {[Co4(H2L)6]216+} formed by the mechanical interlocking of two {[Co4(H2L)6]8+} rectangles of unprecedented topology. Subtle manipulation of the synthetic conditions allows the isolation of a mixed‐valence [Co2III/Co2II]10+ non‐catenated rectangle. The CoII centers in the [2]catenane exhibit slow relaxation of their magnetic moment, i. e. single‐molecule magnet properties, dominated by quantum tunneling and Raman relaxation processes. This work shows that metallo‐supramolecular chemistry can precisely control the organization of single‐molecule magnets in topologically complex arrangements.
- 9 December 2021
- Published by Wiley in Angewandte Chemie
- Vol. 134 (4)
Self‐Assembly Synthesis of a [2]Catenane CoII Single‐Molecule Magnet
We describe herein the self‐assembly synthesis of an octanuclear CoII [2]catenane {[Co4(H2L)6]216+} formed by the mechanical interlocking of two {[Co4(H2L)6]8+} rectangles of unprecedented topology. Subtle manipulation of the synthetic conditions allows the isolation of a mixed‐valence [Co2III/Co2II]10+ non‐catenated rectangle. The CoII centers in the [2]catenane exhibit slow relaxation of their magnetic moment, i. e. single‐molecule magnet properties, dominated by quantum tunneling and Raman relaxation processes. This work shows that metallo‐supramolecular chemistry can precisely control the organization of single‐molecule magnets in topologically complex arrangements.
- 16 April 2020
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 8 (23) , 7708-7717
Photostable orange-red fluorescent unsymmetrical diketopyrrolopyrrole–BF 2 hybrids
The straightforward synthesis of structurally unique DPP–BODIPY hybrids has been developed using unsymmetrical, imidazopyridine substituted DPPs. These hybrids exhibit a superb combination of photophysical properties including high photostability, good fluorescence quantum yield as well as markedly bathochromically shifted absorption and emission compared to conventional diketopyrrolopyrroles. Increasing the size of the imidazopyridine substituent and/or the electron donating power of the other aryl substituent can further redshift both absorption and emission to reach ∼650 nm for the free-base and ca. 700 nm for boron-chelates. A strong intramolecular hydrogen bond is responsible for the small change in geometry between the ground and excited states and hence relatively small differences in photophysical properties upon formation of boron-chelates are observed. The solvent dependence of the photophysical properties for the free base and DPP–BF2 complexes were investigated and show strong fluorescence with long lifetimes in both non-polar and polar aprotic environments.
- 16 April 2020
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 8 (23) , 7708-7717
Photostable orange-red fluorescent unsymmetrical diketopyrrolopyrrole–BF 2 hybrids
The straightforward synthesis of structurally unique DPP–BODIPY hybrids has been developed using unsymmetrical, imidazopyridine substituted DPPs. These hybrids exhibit a superb combination of photophysical properties including high photostability, good fluorescence quantum yield as well as markedly bathochromically shifted absorption and emission compared to conventional diketopyrrolopyrroles. Increasing the size of the imidazopyridine substituent and/or the electron donating power of the other aryl substituent can further redshift both absorption and emission to reach ∼650 nm for the free-base and ca. 700 nm for boron-chelates. A strong intramolecular hydrogen bond is responsible for the small change in geometry between the ground and excited states and hence relatively small differences in photophysical properties upon formation of boron-chelates are observed. The solvent dependence of the photophysical properties for the free base and DPP–BF2 complexes were investigated and show strong fluorescence with long lifetimes in both non-polar and polar aprotic environments.
- 1 July 2019
- Published by Royal Society of Chemistry (RSC) in Organic Chemistry Frontiers
- Vol. 6 (16) , 2939-2948
Fe(iii)-Catalyzed synthesis of pyrrolo[3,2-b]pyrroles: formation of new dyes and photophysical studies
The multicomponent reaction of primary aromatic amines, aromatic aldehydes and biacetyl leads to 1,2,4,5-tetraarylpyrrolo[3,2-b]pyrroles in yields as large as 77% when catalyzed by iron(III) perchlorate. These new conditions enabled for the first time, the synthesis of pyrrolo[3,2-b]pyrroles from 5-membered heterocyclic aldehydes such as furan, thiophene, thiazole, and their benzo derivatives as well as from 1-aminonaphthalene, 3,5-bis(trifluoromethyl)aniline, and hexane-3,4-dione. Photophysical studies have revealed that pyrrolo[3,2-b]pyrroles possessing five-membered rings at positions 2 and 5 have large fluorescence quantum yields as well as bathochromicaly shifted absorption and emission compared to tetraphenyl-pyrrolopyrroles; the shift being particularly marked for both furan and benzofuran. Large Stokes shifts can be attained when substituents bearing multiple biaryl linkages are present at positions 2 and 5. The new fluorphores’ optical properties were rationalized through ab initio calculations relying on Time-Dependent Density Functional Theory (TD-DFT) and second-order Coupled Cluster (CC2) methods. These computational studies confirmed that low dihedral angles are the main cause for bathochromically shifted absorption and emission for pyrrolo[3,2-b]pyrroles bearing five-membered aromatic heterocycles.
- 1 July 2019
- Published by Royal Society of Chemistry (RSC) in Organic Chemistry Frontiers
- Vol. 6 (16) , 2939-2948
Fe(iii)-Catalyzed synthesis of pyrrolo[3,2-b]pyrroles: formation of new dyes and photophysical studies
The multicomponent reaction of primary aromatic amines, aromatic aldehydes and biacetyl leads to 1,2,4,5-tetraarylpyrrolo[3,2-b]pyrroles in yields as large as 77% when catalyzed by iron(III) perchlorate. These new conditions enabled for the first time, the synthesis of pyrrolo[3,2-b]pyrroles from 5-membered heterocyclic aldehydes such as furan, thiophene, thiazole, and their benzo derivatives as well as from 1-aminonaphthalene, 3,5-bis(trifluoromethyl)aniline, and hexane-3,4-dione. Photophysical studies have revealed that pyrrolo[3,2-b]pyrroles possessing five-membered rings at positions 2 and 5 have large fluorescence quantum yields as well as bathochromicaly shifted absorption and emission compared to tetraphenyl-pyrrolopyrroles; the shift being particularly marked for both furan and benzofuran. Large Stokes shifts can be attained when substituents bearing multiple biaryl linkages are present at positions 2 and 5. The new fluorphores’ optical properties were rationalized through ab initio calculations relying on Time-Dependent Density Functional Theory (TD-DFT) and second-order Coupled Cluster (CC2) methods. These computational studies confirmed that low dihedral angles are the main cause for bathochromically shifted absorption and emission for pyrrolo[3,2-b]pyrroles bearing five-membered aromatic heterocycles.
- 18 July 2018
- Published by Wiley in Chemistry – An Asian Journal
- Vol. 14 (10) , 1763-1770
Building Molecular Complexity from Quinizarin: Conjoined Coumarins and Coronene Analogs
The double Knoevenagel condensation of 1,4‐dibenzoyloxyanthraquinone with methyl esters of arylacetic acids affords a series of compounds based upon a previously unknown 1,8‐dioxa‐benzo[e]pyrene‐2,7‐dione heterocyclic core. The aryl groups incorporated in the 3‐ and 6‐positions can be oxidatively coupled to the π‐expanded backbone to produce a further new heterocyclic core: 1,10‐dioxa‐dibenzo[dj]coronene‐2,9‐dione. The intriguing optical properties of these π‐expanded coumarin derivatives are discussed and rationalized through quantum chemical calculations. The broad absorption bands of 1,8‐dioxa‐benzo[e]pyrene‐2,7‐dione‐based dyes are attributed to both HOMO−1→LUMO and HOMO→LUMO transitions, which have a similar energy. Weakly coupled electron‐donating aryl substituents result in a moderate bathochromic shift of both the absorption and emission by 30–60 nm in toluene. The emissive properties of these compounds are in part determined by the oscillator strength of the main transition, lifetimes of the excited state, and by the energy match of the excited state with a triplet state of a similar energy. The 1,10‐dioxa‐dibenzo[dj]coronene‐2,9‐dione displays a much smaller Stokes shift, yet a markedly increased fluorescence quantum yield of 90 % owing to the increased rigidity compared with the 1,8‐dioxa‐benzo[e]pyrene‐2,7‐dione core.
- 18 July 2018
- Published by Wiley in Chemistry – An Asian Journal
- Vol. 14 (10) , 1763-1770
Building Molecular Complexity from Quinizarin: Conjoined Coumarins and Coronene Analogs
The double Knoevenagel condensation of 1,4‐dibenzoyloxyanthraquinone with methyl esters of arylacetic acids affords a series of compounds based upon a previously unknown 1,8‐dioxa‐benzo[e]pyrene‐2,7‐dione heterocyclic core. The aryl groups incorporated in the 3‐ and 6‐positions can be oxidatively coupled to the π‐expanded backbone to produce a further new heterocyclic core: 1,10‐dioxa‐dibenzo[dj]coronene‐2,9‐dione. The intriguing optical properties of these π‐expanded coumarin derivatives are discussed and rationalized through quantum chemical calculations. The broad absorption bands of 1,8‐dioxa‐benzo[e]pyrene‐2,7‐dione‐based dyes are attributed to both HOMO−1→LUMO and HOMO→LUMO transitions, which have a similar energy. Weakly coupled electron‐donating aryl substituents result in a moderate bathochromic shift of both the absorption and emission by 30–60 nm in toluene. The emissive properties of these compounds are in part determined by the oscillator strength of the main transition, lifetimes of the excited state, and by the energy match of the excited state with a triplet state of a similar energy. The 1,10‐dioxa‐dibenzo[dj]coronene‐2,9‐dione displays a much smaller Stokes shift, yet a markedly increased fluorescence quantum yield of 90 % owing to the increased rigidity compared with the 1,8‐dioxa‐benzo[e]pyrene‐2,7‐dione core.
- 25 September 2017
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 56 (20) , 12224-12231
An Isoreticular Series of Zinc(II) Metal–Organic Frameworks Derived from Terpyridylcarboxylate Ligands
An isoreticular family of seven microporous metal–organic frameworks of the general form [ZnL] have been synthesized, where L is a 4′-substituted 2,2′:6′,2″-terpyridine-4,4″-dicarboxylate ligand. Each framework adopts an interpenetrated zeolitic gismondine (gis-c) topology and possesses one-dimensional square channels with ca. 9.0 Å apertures running down the crystallographic c axis. Gas adsorption measurements with N2, H2, CH4, and CO2 confirm their permanent porosity. The ligand functional groups, which include phenyl, 2-tolyl, 4-chlorophenyl, 4-nitrophenyl, 2-thienyl, 3-thienyl, and 4-pyridyl, line the channel walls and tune the gas adsorption properties of these materials.
- 25 September 2017
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 56 (20) , 12224-12231
An Isoreticular Series of Zinc(II) Metal–Organic Frameworks Derived from Terpyridylcarboxylate Ligands
An isoreticular family of seven microporous metal–organic frameworks of the general form [ZnL] have been synthesized, where L is a 4′-substituted 2,2′:6′,2″-terpyridine-4,4″-dicarboxylate ligand. Each framework adopts an interpenetrated zeolitic gismondine (gis-c) topology and possesses one-dimensional square channels with ca. 9.0 Å apertures running down the crystallographic c axis. Gas adsorption measurements with N2, H2, CH4, and CO2 confirm their permanent porosity. The ligand functional groups, which include phenyl, 2-tolyl, 4-chlorophenyl, 4-nitrophenyl, 2-thienyl, 3-thienyl, and 4-pyridyl, line the channel walls and tune the gas adsorption properties of these materials.
- 14 May 2017
- Published by Wiley in Chemistry – An Asian Journal
- Vol. 12 (13) , 1649-1658
Pyrazolo[4,3‐h]quinoline Ligand‐Based Iridium(III) Complexes for Electrochemiluminescence
Electrochemiluminescence (ECL) based on [Ru(bpy)3]2+ systems is widely utilized for immunoassays. In order to extend the promising potential of ECL‐based applications, IrIII complexes have recently attracted attention as probes because of their excellent luminescent properties and tunable emission wavelength. Here we describe a series of Ir complexes using a large π‐conjugated ligand and different ancillary chelates. The complexes synthesized have been chemically and spectroscopically characterized and used for ECL measurements with annihilation and co‐reactant methods. One of the IrIII complexes investigated exhibits the brightest, ever reported, ECL efficiency in acetonitrile employing the benzoyl peroxide (BPO) co‐reactant method.
- 14 May 2017
- Published by Wiley in Chemistry – An Asian Journal
- Vol. 12 (13) , 1649-1658
Pyrazolo[4,3‐h]quinoline Ligand‐Based Iridium(III) Complexes for Electrochemiluminescence
Electrochemiluminescence (ECL) based on [Ru(bpy)3]2+ systems is widely utilized for immunoassays. In order to extend the promising potential of ECL‐based applications, IrIII complexes have recently attracted attention as probes because of their excellent luminescent properties and tunable emission wavelength. Here we describe a series of Ir complexes using a large π‐conjugated ligand and different ancillary chelates. The complexes synthesized have been chemically and spectroscopically characterized and used for ECL measurements with annihilation and co‐reactant methods. One of the IrIII complexes investigated exhibits the brightest, ever reported, ECL efficiency in acetonitrile employing the benzoyl peroxide (BPO) co‐reactant method.