Hakan Yalciner
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Hakan Yalciner has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- Atila Kumbasaroglu
Department of Civil Engineering Erzincan Binali Yıldırım University Erzincan Turkey
9 shared publications - Ahmet İhSan Turan
Faculty of Engineering and Architecture, Department of Civil Engineering, Erzincan Binali Yildirim University, Erzincan 24002, Türkiye
6 shared publications Atila Kumbasaroglu
6 shared publicationsAhmet İhsan Turan
3 shared publications- Alper Çelik
Faculty of Engineering, Department of Civil Engineering, Ankara University, Ankara 06100, Türkiye
3 shared publications - Yaşar Ayaz
Department of Civil Engineering, İnönü University, Malatya 44280, Türkiye
3 shared publications
Latest Publications
- Open Access
Functional Lightweight Concrete Systems for Sustainable Load-Bearing Applications: Experimental Assessment of Perlite-Modified Reinforced Concrete Beams
The increasing demand for sustainable structural materials in the construction industry has intensified the need to develop high-performance and environmentally efficient reinforced concrete systems. In this context, the incorporation of functional material-enhanced concrete systems, including raw lightweight aggregates such as perlite, offers a promising pathway for reducing environmental impact while maintaining adequate structural performance. This study experimentally investigates the flexural behavior of reinforced concrete (RC) beams incorporating raw perlite aggregates within a functional material-enhanced structural framework. A total of four RC beams with identical geometry and reinforcement details were produced, including perlite aggregate beams (P25 and P40) and conventional aggregate beams (C25 and C40), corresponding to compressive strength classes of 25 MPa and 40 MPa. All specimens were tested under monotonic flexural loading conditions. The structural response was evaluated in terms of load–displacement behavior, stiffness degradation, ductility, energy dissipation capacity, moment–curvature response, and failure modes. The results indicate that perlite aggregate beams exhibit reduced stiffness and energy dissipation capacity compared to conventional counterparts at comparable mixture-average compressive-strength levels. However, the high-strength perlite beam (P40) demonstrated comparable flexural capacity and ductility to the normal-strength conventional beam (C25), highlighting its potential for sustainable structural applications. Furthermore, a building-scale environmental assessment based on a representative three-story reinforced concrete structure demonstrates that the use of raw perlite aggregates significantly reduces energy consumption, CO2-equivalent emissions, and water usage. From a functional materials perspective, the findings provide a basis for the future development of multifunctional load-bearing concrete systems, where lightweight aggregate substrates can be combined with protective or performance-enhancing coating technologies to achieve improved durability, environmental resistance, and structural efficiency. This integration could further enhance durability and long-term structural performance in load-bearing applications.
Open AccessFunctional Lightweight Concrete Systems for Sustainable Load-Bearing Applications: Experimental Assessment of Perlite-Modified Reinforced Concrete Beams
The increasing demand for sustainable structural materials in the construction industry has intensified the need to develop high-performance and environmentally efficient reinforced concrete systems. In this context, the incorporation of functional material-enhanced concrete systems, including raw lightweight aggregates such as perlite, offers a promising pathway for reducing environmental impact while maintaining adequate structural performance. This study experimentally investigates the flexural behavior of reinforced concrete (RC) beams incorporating raw perlite aggregates within a functional material-enhanced structural framework. A total of four RC beams with identical geometry and reinforcement details were produced, including perlite aggregate beams (P25 and P40) and conventional aggregate beams (C25 and C40), corresponding to compressive strength classes of 25 MPa and 40 MPa. All specimens were tested under monotonic flexural loading conditions. The structural response was evaluated in terms of load–displacement behavior, stiffness degradation, ductility, energy dissipation capacity, moment–curvature response, and failure modes. The results indicate that perlite aggregate beams exhibit reduced stiffness and energy dissipation capacity compared to conventional counterparts at comparable mixture-average compressive-strength levels. However, the high-strength perlite beam (P40) demonstrated comparable flexural capacity and ductility to the normal-strength conventional beam (C25), highlighting its potential for sustainable structural applications. Furthermore, a building-scale environmental assessment based on a representative three-story reinforced concrete structure demonstrates that the use of raw perlite aggregates significantly reduces energy consumption, CO2-equivalent emissions, and water usage. From a functional materials perspective, the findings provide a basis for the future development of multifunctional load-bearing concrete systems, where lightweight aggregate substrates can be combined with protective or performance-enhancing coating technologies to achieve improved durability, environmental resistance, and structural efficiency. This integration could further enhance durability and long-term structural performance in load-bearing applications.
- Open Access
- 26 April 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (9) , 4235
Seismic Performance and Nonlinear Flexural Behavior of Corroded Reinforced Concrete Columns: An Analytical and Parametric Study
This study presents an analytical investigation and a parametric evaluation of the structural behavior and seismic performance of highly corroded reinforced concrete (RC) columns, based on previously conducted experimental studies by the authors. In the analytical phase, moment–curvature relationships were obtained by considering the deterioration of the mechanical properties of both concrete and reinforcing steel due to corrosion in RC column specimens. By linking the sectional moment–curvature response with the element-level behavior observed in the experimental program, the plastic hinge lengths and rotational capacities of the corroded RC columns were determined. Subsequently, a parametric study was carried out using the analytical framework developed in the first phase on a set of 48 RC column models. In this investigation, axial load ratio, concrete compressive strength, corrosion level, section type, and concrete cover depth were considered as key parameters. The results of the combined experimental and analytical investigations demonstrate that the adopted section analysis approach successfully captures the nonlinear flexural behavior observed in the corroded specimens and provides a reliable basis for evaluating the structural performance and for supporting the assessment of seismic performance of deteriorated RC columns.
- 26 April 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (9) , 4235
Open AccessSeismic Performance and Nonlinear Flexural Behavior of Corroded Reinforced Concrete Columns: An Analytical and Parametric Study
This study presents an analytical investigation and a parametric evaluation of the structural behavior and seismic performance of highly corroded reinforced concrete (RC) columns, based on previously conducted experimental studies by the authors. In the analytical phase, moment–curvature relationships were obtained by considering the deterioration of the mechanical properties of both concrete and reinforcing steel due to corrosion in RC column specimens. By linking the sectional moment–curvature response with the element-level behavior observed in the experimental program, the plastic hinge lengths and rotational capacities of the corroded RC columns were determined. Subsequently, a parametric study was carried out using the analytical framework developed in the first phase on a set of 48 RC column models. In this investigation, axial load ratio, concrete compressive strength, corrosion level, section type, and concrete cover depth were considered as key parameters. The results of the combined experimental and analytical investigations demonstrate that the adopted section analysis approach successfully captures the nonlinear flexural behavior observed in the corroded specimens and provides a reliable basis for evaluating the structural performance and for supporting the assessment of seismic performance of deteriorated RC columns.
- Open Access
Experimental Investigation of Metamaterial-Inspired Periodic Foundation Systems with Embedded Piezoelectric Layers for Seismic Vibration Attenuation
Seismic metamaterial-inspired periodic foundations have emerged as promising vibration-mitigation concepts capable of attenuating seismic wave propagation within specific frequency bands. This study presents an experimental investigation on the dynamic response of periodic foundation configurations, with and without embedded piezoelectric layers, to evaluate their vibration-attenuation characteristics. The experimental program employed a shake table driven by a 0.75 kW servo motor and included excitation step counts of 3000, 4000, and 5000. Accelerometers mounted on the specimen surfaces recorded vibration data at 80 ms intervals. Three foundation configurations were tested: (i) a conventional reinforced concrete block, (ii) a one-dimensional periodic foundation composed of alternating concrete and rubber layers, and (iii) a periodic foundation incorporating piezoelectric modules. Time-domain and frequency-domain analyses showed that the periodic foundations achieved notable reductions in both peak and RMS accelerations, especially near resonance frequencies. The configuration, including piezoelectric layers, exhibited similar attenuation performance while also generating measurable instantaneous voltage outputs under vibration. However, these voltage peaks—reaching a maximum of 1.64 V—represent only a laboratory-scale, proof-of-concept demonstration of electromechanical coupling rather than a practical or continuous form of energy harvesting, given the inherently sporadic nature of seismic excitation. Overall, the results confirm that the tested system is not a full metamaterial in the classical sense but rather a metamaterial-inspired periodic arrangement capable of inducing band-gap-based vibration attenuation. The inclusion of piezoelectric elements provides auxiliary sensing and micro-energy-generation capabilities, offering a preliminary foundation for future multifunctional seismic-protection concepts.
Open AccessExperimental Investigation of Metamaterial-Inspired Periodic Foundation Systems with Embedded Piezoelectric Layers for Seismic Vibration Attenuation
Seismic metamaterial-inspired periodic foundations have emerged as promising vibration-mitigation concepts capable of attenuating seismic wave propagation within specific frequency bands. This study presents an experimental investigation on the dynamic response of periodic foundation configurations, with and without embedded piezoelectric layers, to evaluate their vibration-attenuation characteristics. The experimental program employed a shake table driven by a 0.75 kW servo motor and included excitation step counts of 3000, 4000, and 5000. Accelerometers mounted on the specimen surfaces recorded vibration data at 80 ms intervals. Three foundation configurations were tested: (i) a conventional reinforced concrete block, (ii) a one-dimensional periodic foundation composed of alternating concrete and rubber layers, and (iii) a periodic foundation incorporating piezoelectric modules. Time-domain and frequency-domain analyses showed that the periodic foundations achieved notable reductions in both peak and RMS accelerations, especially near resonance frequencies. The configuration, including piezoelectric layers, exhibited similar attenuation performance while also generating measurable instantaneous voltage outputs under vibration. However, these voltage peaks—reaching a maximum of 1.64 V—represent only a laboratory-scale, proof-of-concept demonstration of electromechanical coupling rather than a practical or continuous form of energy harvesting, given the inherently sporadic nature of seismic excitation. Overall, the results confirm that the tested system is not a full metamaterial in the classical sense but rather a metamaterial-inspired periodic arrangement capable of inducing band-gap-based vibration attenuation. The inclusion of piezoelectric elements provides auxiliary sensing and micro-energy-generation capabilities, offering a preliminary foundation for future multifunctional seismic-protection concepts.
- 2 August 2025
- Published by Raw Data Library
Predicting performance level of reinforced concrete structures subject to corrosion as a function of time
Deterioration due to corrosion becomes a more serious problem when the exact time of expected earthquakes is unknown. Therefore, the prediction of performance levels of corroded reinforced concrete (RC) structures is important to prevent serious premature damage. Many models have been developed regarding the effects of corrosion as a function of time. It is possible to evaluate and identify the performance level of RC structures as immediate occupancy (IO), life safety (LS), collapse prevention (CP), and collapse (C). The first part of this study contributes to an understanding of time dependent effects of corrosion on seismic performance levels of corroded RC buildings that will be a guideline for the further studies for strengthening and assessing of RC buildings. The developed model in the first part of this thesis provide to predict the time dependent seismic performance levels of RC buildings by considering three major effects of corrosion (e.g., deformation due to bond-slip relationships, loss of cross sectional area of reinforcement bars and reduction in concrete compressive strength). In second part of this thesis, the effect of corrosion on the bond strength between reinforcement bars and concrete was studied in a series of experiments. An accelerated corrosion method was used to corrode the reinforcement bars embedded in concrete specimens. Pullout tests were performed to develop an empirical model for the ultimate bond strength by evaluating bond strengths in two different concrete mixes, three concrete cover depths and different mass losses of reinforcement bars after corrosion. Bond-slip relationships for the different corrosion levels were compared for different concrete classes and concrete cover depths
- 2 August 2025
- Published by Raw Data Library
Predicting performance level of reinforced concrete structures subject to corrosion as a function of time
Deterioration due to corrosion becomes a more serious problem when the exact time of expected earthquakes is unknown. Therefore, the prediction of performance levels of corroded reinforced concrete (RC) structures is important to prevent serious premature damage. Many models have been developed regarding the effects of corrosion as a function of time. It is possible to evaluate and identify the performance level of RC structures as immediate occupancy (IO), life safety (LS), collapse prevention (CP), and collapse (C). The first part of this study contributes to an understanding of time dependent effects of corrosion on seismic performance levels of corroded RC buildings that will be a guideline for the further studies for strengthening and assessing of RC buildings. The developed model in the first part of this thesis provide to predict the time dependent seismic performance levels of RC buildings by considering three major effects of corrosion (e.g., deformation due to bond-slip relationships, loss of cross sectional area of reinforcement bars and reduction in concrete compressive strength). In second part of this thesis, the effect of corrosion on the bond strength between reinforcement bars and concrete was studied in a series of experiments. An accelerated corrosion method was used to corrode the reinforcement bars embedded in concrete specimens. Pullout tests were performed to develop an empirical model for the ultimate bond strength by evaluating bond strengths in two different concrete mixes, three concrete cover depths and different mass losses of reinforcement bars after corrosion. Bond-slip relationships for the different corrosion levels were compared for different concrete classes and concrete cover depths
- 2 August 2025
- Published by Raw Data Library
Challenges of knowledge management through lessons learned practices in construction industry: A North Cyprus perspective
With the increasing pressure for competitiveness on construction contractors, it is necessary to capture, transfer and reuse project knowledge and use lessons learned from previous projects to improve project performance. Knowledge is increasingly seen as a key but often underutilized asset. While Knowledge Management (KM) tends to focus on aspects of the capture, storing and retrieval of knowledge, knowledge creation, dissemination and application is also vital. Thus there is value in managing organizational knowledge. This knowledge originates from the experiences of organizations and is retained in the form of corporate memory. This retained knowledge is usable in expediting similar work in the future, thus benefiting the organization by assisting in rapid implementation on projects. The main objective of this thesis is to investigate the challenges of knowledge management (KM) and introduce a Model of Framework for Lessons Learned Process (LLP) that facilitates the sharing of knowledge about experiences and transferring of lessons learned at organizational level in North Cyprus construction industry. The research focus is to identify the processes of knowledge management, analyze the use of project feedback and lessons learned, and introduce a Model of Framework for LLP in construction contractors. A questionnaire survey, which was administered to the construction contractors in the industry, has been used in conducting the survey. The research includes an extensive literature study, interviews with managers on how to manage lessons learned processes throughout the organizations, analysis of this information to develop findings, and extending these to model an evolving framework of LLP over time in organizations. Without managing lessons learned process, the proper culture, and efficient technology application, the value of the knowledge, even if it is present, will be significantly less.
- 2 August 2025
- Published by Raw Data Library
Challenges of knowledge management through lessons learned practices in construction industry: A North Cyprus perspective
With the increasing pressure for competitiveness on construction contractors, it is necessary to capture, transfer and reuse project knowledge and use lessons learned from previous projects to improve project performance. Knowledge is increasingly seen as a key but often underutilized asset. While Knowledge Management (KM) tends to focus on aspects of the capture, storing and retrieval of knowledge, knowledge creation, dissemination and application is also vital. Thus there is value in managing organizational knowledge. This knowledge originates from the experiences of organizations and is retained in the form of corporate memory. This retained knowledge is usable in expediting similar work in the future, thus benefiting the organization by assisting in rapid implementation on projects. The main objective of this thesis is to investigate the challenges of knowledge management (KM) and introduce a Model of Framework for Lessons Learned Process (LLP) that facilitates the sharing of knowledge about experiences and transferring of lessons learned at organizational level in North Cyprus construction industry. The research focus is to identify the processes of knowledge management, analyze the use of project feedback and lessons learned, and introduce a Model of Framework for LLP in construction contractors. A questionnaire survey, which was administered to the construction contractors in the industry, has been used in conducting the survey. The research includes an extensive literature study, interviews with managers on how to manage lessons learned processes throughout the organizations, analysis of this information to develop findings, and extending these to model an evolving framework of LLP over time in organizations. Without managing lessons learned process, the proper culture, and efficient technology application, the value of the knowledge, even if it is present, will be significantly less.
- 27 July 2025
- Published by Raw Data Library
Challenges of knowledge management through lessons learned practices in construction industry: A North Cyprus perspective
With the increasing pressure for competitiveness on construction contractors, it is necessary to capture, transfer and reuse project knowledge and use lessons learned from previous projects to improve project performance. Knowledge is increasingly seen as a key but often underutilized asset. While Knowledge Management (KM) tends to focus on aspects of the capture, storing and retrieval of knowledge, knowledge creation, dissemination and application is also vital. Thus there is value in managing organizational knowledge. This knowledge originates from the experiences of organizations and is retained in the form of corporate memory. This retained knowledge is usable in expediting similar work in the future, thus benefiting the organization by assisting in rapid implementation on projects. The main objective of this thesis is to investigate the challenges of knowledge management (KM) and introduce a Model of Framework for Lessons Learned Process (LLP) that facilitates the sharing of knowledge about experiences and transferring of lessons learned at organizational level in North Cyprus construction industry. The research focus is to identify the processes of knowledge management, analyze the use of project feedback and lessons learned, and introduce a Model of Framework for LLP in construction contractors. A questionnaire survey, which was administered to the construction contractors in the industry, has been used in conducting the survey. The research includes an extensive literature study, interviews with managers on how to manage lessons learned processes throughout the organizations, analysis of this information to develop findings, and extending these to model an evolving framework of LLP over time in organizations. Without managing lessons learned process, the proper culture, and efficient technology application, the value of the knowledge, even if it is present, will be significantly less.
- 27 July 2025
- Published by Raw Data Library
Challenges of knowledge management through lessons learned practices in construction industry: A North Cyprus perspective
With the increasing pressure for competitiveness on construction contractors, it is necessary to capture, transfer and reuse project knowledge and use lessons learned from previous projects to improve project performance. Knowledge is increasingly seen as a key but often underutilized asset. While Knowledge Management (KM) tends to focus on aspects of the capture, storing and retrieval of knowledge, knowledge creation, dissemination and application is also vital. Thus there is value in managing organizational knowledge. This knowledge originates from the experiences of organizations and is retained in the form of corporate memory. This retained knowledge is usable in expediting similar work in the future, thus benefiting the organization by assisting in rapid implementation on projects. The main objective of this thesis is to investigate the challenges of knowledge management (KM) and introduce a Model of Framework for Lessons Learned Process (LLP) that facilitates the sharing of knowledge about experiences and transferring of lessons learned at organizational level in North Cyprus construction industry. The research focus is to identify the processes of knowledge management, analyze the use of project feedback and lessons learned, and introduce a Model of Framework for LLP in construction contractors. A questionnaire survey, which was administered to the construction contractors in the industry, has been used in conducting the survey. The research includes an extensive literature study, interviews with managers on how to manage lessons learned processes throughout the organizations, analysis of this information to develop findings, and extending these to model an evolving framework of LLP over time in organizations. Without managing lessons learned process, the proper culture, and efficient technology application, the value of the knowledge, even if it is present, will be significantly less.
- 27 July 2025
- Published by Raw Data Library
Predicting performance level of reinforced concrete structures subject to corrosion as a function of time
Deterioration due to corrosion becomes a more serious problem when the exact time of expected earthquakes is unknown. Therefore, the prediction of performance levels of corroded reinforced concrete (RC) structures is important to prevent serious premature damage. Many models have been developed regarding the effects of corrosion as a function of time. It is possible to evaluate and identify the performance level of RC structures as immediate occupancy (IO), life safety (LS), collapse prevention (CP), and collapse (C). The first part of this study contributes to an understanding of time dependent effects of corrosion on seismic performance levels of corroded RC buildings that will be a guideline for the further studies for strengthening and assessing of RC buildings. The developed model in the first part of this thesis provide to predict the time dependent seismic performance levels of RC buildings by considering three major effects of corrosion (e.g., deformation due to bond-slip relationships, loss of cross sectional area of reinforcement bars and reduction in concrete compressive strength). In second part of this thesis, the effect of corrosion on the bond strength between reinforcement bars and concrete was studied in a series of experiments. An accelerated corrosion method was used to corrode the reinforcement bars embedded in concrete specimens. Pullout tests were performed to develop an empirical model for the ultimate bond strength by evaluating bond strengths in two different concrete mixes, three concrete cover depths and different mass losses of reinforcement bars after corrosion. Bond-slip relationships for the different corrosion levels were compared for different concrete classes and concrete cover depths.
- 27 July 2025
- Published by Raw Data Library
Predicting performance level of reinforced concrete structures subject to corrosion as a function of time
Deterioration due to corrosion becomes a more serious problem when the exact time of expected earthquakes is unknown. Therefore, the prediction of performance levels of corroded reinforced concrete (RC) structures is important to prevent serious premature damage. Many models have been developed regarding the effects of corrosion as a function of time. It is possible to evaluate and identify the performance level of RC structures as immediate occupancy (IO), life safety (LS), collapse prevention (CP), and collapse (C). The first part of this study contributes to an understanding of time dependent effects of corrosion on seismic performance levels of corroded RC buildings that will be a guideline for the further studies for strengthening and assessing of RC buildings. The developed model in the first part of this thesis provide to predict the time dependent seismic performance levels of RC buildings by considering three major effects of corrosion (e.g., deformation due to bond-slip relationships, loss of cross sectional area of reinforcement bars and reduction in concrete compressive strength). In second part of this thesis, the effect of corrosion on the bond strength between reinforcement bars and concrete was studied in a series of experiments. An accelerated corrosion method was used to corrode the reinforcement bars embedded in concrete specimens. Pullout tests were performed to develop an empirical model for the ultimate bond strength by evaluating bond strengths in two different concrete mixes, three concrete cover depths and different mass losses of reinforcement bars after corrosion. Bond-slip relationships for the different corrosion levels were compared for different concrete classes and concrete cover depths.
- Open Access
- 19 July 2025
- Published by Raw Data Library
Sefa Atli, Hakan Yalçıner, Ahmet Turan, Alper Celik, Atila Kumbasaroglu, Alperen Bulut (2023). Doğal perlit ile üretilmiş betonarme kolonların tersinir yük etkisi altında yapısal davranışlarının incelenmesi. Raw dataset for yük-deplasman ilişkileleri, Raw data library, doi: 10.71008/rdl.dataset.2025.241
Sefa Atli, Hakan Yalçıner, Ahmet İhsan Turan, Alper Celik, Atila Kumbasaroglu, H. Alperen Bulut (2023). Doğal perlit ile üretilmiş betonarme kolonların tersi…
- 19 July 2025
- Published by Raw Data Library
Open AccessSefa Atli, Hakan Yalçıner, Ahmet Turan, Alper Celik, Atila Kumbasaroglu, Alperen Bulut (2023). Doğal perlit ile üretilmiş betonarme kolonların tersinir yük etkisi altında yapısal davranışlarının incelenmesi. Raw dataset for yük-deplasman ilişkileleri, Raw data library, doi: 10.71008/rdl.dataset.2025.241
Sefa Atli, Hakan Yalçıner, Ahmet İhsan Turan, Alper Celik, Atila Kumbasaroglu, H. Alperen Bulut (2023). Doğal perlit ile üretilmiş betonarme kolonların tersi…
- Open Access
- 19 July 2025
- Published by Raw Data Library
Sefa Atli, Hakan Yalçıner, Atila Kumbasaroglu, Yaşar Ayaz, Ahmet Turan, Sepanta Naimi (2025). Experimental evaluation of reinforced concrete columns produced with natural perlite aggregates under cyclic loading. Raw dataset for hysteretic loops, Raw data library, doi: 10.71008/rdl.dataset.2025.237
Sefa Atli, Hakan Yalçıner, Atila Kumbasaroglu, Yaşar Ayaz, Ahmet İhsan Turan, Sepanta Naimi (2025). Experimental evaluation of reinforced concrete columns p…
- 19 July 2025
- Published by Raw Data Library
Open AccessSefa Atli, Hakan Yalçıner, Atila Kumbasaroglu, Yaşar Ayaz, Ahmet Turan, Sepanta Naimi (2025). Experimental evaluation of reinforced concrete columns produced with natural perlite aggregates under cyclic loading. Raw dataset for hysteretic loops, Raw data library, doi: 10.71008/rdl.dataset.2025.237
Sefa Atli, Hakan Yalçıner, Atila Kumbasaroglu, Yaşar Ayaz, Ahmet İhsan Turan, Sepanta Naimi (2025). Experimental evaluation of reinforced concrete columns p…
- 8 July 2025
- Published by Wiley in Structural Concrete
- Vol. 27 (1) , 411-432
Experimental evaluation of reinforced concrete columns produced with natural perlite aggregates under cyclic loading
A total of four reinforced concrete (RC) columns were tested to compare the structural capacities of RC columns produced by natural perlite aggregates and conventional concrete. The structural performance of the RC columns made from natural perlite aggregates was compared to conventional RC columns regarding the same concrete strength levels, sectional properties, and reinforcement layouts of conventional RC columns. The RC columns were tested under a combined constant axial load ratio of 30% with cyclic loading for two concrete strength levels, namely, 25 and 40 MPa. Load–displacement curves, energy absorption capacities, stiffness degradation, the moment‐curvature relationship, the plastic hinge mechanism, and the ductility index were experimentally obtained at two different concrete types along with the measured stress–strain properties of the conventional and perlite concrete. The test results showed that the construction of the RC columns using only perlite may become possible in the future by providing an adequate concrete stress–strain capacity, which will be improved. Additionally, the use of natural perlite aggregates can contribute to sustainable construction practices by reducing the reliance on conventional aggregates.
- 8 July 2025
- Published by Wiley in Structural Concrete
- Vol. 27 (1) , 411-432
Experimental evaluation of reinforced concrete columns produced with natural perlite aggregates under cyclic loading
A total of four reinforced concrete (RC) columns were tested to compare the structural capacities of RC columns produced by natural perlite aggregates and conventional concrete. The structural performance of the RC columns made from natural perlite aggregates was compared to conventional RC columns regarding the same concrete strength levels, sectional properties, and reinforcement layouts of conventional RC columns. The RC columns were tested under a combined constant axial load ratio of 30% with cyclic loading for two concrete strength levels, namely, 25 and 40 MPa. Load–displacement curves, energy absorption capacities, stiffness degradation, the moment‐curvature relationship, the plastic hinge mechanism, and the ductility index were experimentally obtained at two different concrete types along with the measured stress–strain properties of the conventional and perlite concrete. The test results showed that the construction of the RC columns using only perlite may become possible in the future by providing an adequate concrete stress–strain capacity, which will be improved. Additionally, the use of natural perlite aggregates can contribute to sustainable construction practices by reducing the reliance on conventional aggregates.