Huiqing Zhai
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Huiqing Zhai has a total of 137 co-authors. Here are the top co-authors by number of shared publications:
Lei Xi
12 shared publicationsChanghong Liang
National Key Laboratory of Antennas and Microwave Technology; School of Electronic Engineering; Xidian University; Xi'an Shaanxi 710071 China
11 shared publicationsDong Yang
National Key Laboratory of Antennas and Microwave Technology, School of Electronic Engineering Xidian University Xi'an Shaanxi China
10 shared publicationsYuxin Jia
9 shared publicationsLong Li
National key Laboratory of Science and Technology on Antennas and Microwaves, The School of Electronic Engineering, Xidian University, Xi’an, People’s Republic of China
8 shared publicationsZichun Wei
National Key Laboratory of Antennas and Microwave Technology School of Electronic Engineering, Xidian University Xi'an Shaanxi China
8 shared publications
Latest Publications
- 22 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 74 (4) , 3693-3698
Radiation Pattern Improvement Design Based on Polarization Control in a V-Shaped Radome Environment
In this communication, two radiation-pattern correction methodologies are proposed to address distortions in obliquely polarized antenna enclosed within V-shaped radomes. The first approach employs a polarization selective surface (PSS) to suppress the vertically polarized component responsible for destructive interference, thereby eliminating the interference-induced pattern distortion. Building upon this concept, the second approach introduces a polarization rotation surface (PRS) to manipulate the phase relationship between the transmitted and reflected waves, enabling controlled constructive interference and effectively compensating for the radome-induced radiation nulls. Both methods require no modification to either the radome structure or the antenna itself. Over the 12-17 GHz band and within the ±45° angular sector, the null depths in the vertical and parallel polarizations are improved by more than 8.5 dB and 2.3 dB, respectively, while the overall pattern ripple remains within 6 dB across the target angular region. Both the PSS and PRS are fabricated and tested, confirming the improvement effects. The proposed techniques provide an efficient and practical solution for mitigating radiation-pattern distortion in constrained antenna-radome systems.
- 22 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 74 (4) , 3693-3698
Radiation Pattern Improvement Design Based on Polarization Control in a V-Shaped Radome Environment
In this communication, two radiation-pattern correction methodologies are proposed to address distortions in obliquely polarized antenna enclosed within V-shaped radomes. The first approach employs a polarization selective surface (PSS) to suppress the vertically polarized component responsible for destructive interference, thereby eliminating the interference-induced pattern distortion. Building upon this concept, the second approach introduces a polarization rotation surface (PRS) to manipulate the phase relationship between the transmitted and reflected waves, enabling controlled constructive interference and effectively compensating for the radome-induced radiation nulls. Both methods require no modification to either the radome structure or the antenna itself. Over the 12-17 GHz band and within the ±45° angular sector, the null depths in the vertical and parallel polarizations are improved by more than 8.5 dB and 2.3 dB, respectively, while the overall pattern ripple remains within 6 dB across the target angular region. Both the PSS and PRS are fabricated and tested, confirming the improvement effects. The proposed techniques provide an efficient and practical solution for mitigating radiation-pattern distortion in constrained antenna-radome systems.
- 19 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 74 (4) , 3551-3560
Design of a High Selectivity Miniaturized Wideband Absorber Based on Mode Analysis and Regulation
This article presents a novel design methodology for achieving a miniaturized wideband absorber with a high roll-off transition band based on mode analysis and regulation technique, rather than the conventional equivalent circuit-based approaches. Initially, the optimal positions for resistor loading are determined through current analysis. Subsequently, meandered stubs are introduced to regulate the current modes of the absorber. Herein, by employing mode fusion and current path optimization, the high-frequency transition band is reduced by 79%. Furthermore, four metal vias are introduced, and the structure of the absorber is reconfigured to achieve a 48.3% miniaturization in the cross-sectional dimensions. Finally, the absorption under oblique incidence is optimized through strategic resistor loading. Above all, the principles of the proposed absorber are designed, and a prototype is fabricated and measured. Experimental results demonstrate that the absorber achieves an absorption rate above 90% within the frequency range of 2.37–10.13 GHz, with a high-frequency transition bandwidth of only 3%. Additionally, it exhibits excellent angular stability under a period of $0.09~\lambda _{\mathrm {L}}$ (where $\lambda _{\mathrm {L}}$ is the wavelength at the lowest operating frequency). The work holds broad application prospects in fields such as electromagnetic-wave amplitude control, reflection shielding, and radar cross section reduction.
- 19 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 74 (4) , 3551-3560
Design of a High Selectivity Miniaturized Wideband Absorber Based on Mode Analysis and Regulation
This article presents a novel design methodology for achieving a miniaturized wideband absorber with a high roll-off transition band based on mode analysis and regulation technique, rather than the conventional equivalent circuit-based approaches. Initially, the optimal positions for resistor loading are determined through current analysis. Subsequently, meandered stubs are introduced to regulate the current modes of the absorber. Herein, by employing mode fusion and current path optimization, the high-frequency transition band is reduced by 79%. Furthermore, four metal vias are introduced, and the structure of the absorber is reconfigured to achieve a 48.3% miniaturization in the cross-sectional dimensions. Finally, the absorption under oblique incidence is optimized through strategic resistor loading. Above all, the principles of the proposed absorber are designed, and a prototype is fabricated and measured. Experimental results demonstrate that the absorber achieves an absorption rate above 90% within the frequency range of 2.37–10.13 GHz, with a high-frequency transition bandwidth of only 3%. Additionally, it exhibits excellent angular stability under a period of $0.09~\lambda _{\mathrm {L}}$ (where $\lambda _{\mathrm {L}}$ is the wavelength at the lowest operating frequency). The work holds broad application prospects in fields such as electromagnetic-wave amplitude control, reflection shielding, and radar cross section reduction.
- 29 August 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (18) , 38466-38482
Tri-band shared aperture MIMO metantenna with broadband low scattering characteristics
In this paper, a triple band shared aperture multiple input multiple output (MIMO) antenna is proposed, with each antenna capable of reducing radar cross section (RCS). The RCS reduction (RCSR) of 4-14 GHz is accomplished through a chessboard-distributed dual-layer polarization conversion metasurface (PCM). The PCM is fed directly by an L-shaped branch, forming a metantenna covering 5.3-6.9 GHz and is assembled into a 4×2 ±45° dual-polarized MIMO antenna, with isolation exceeding 20 dB without extra decoupling technology. A low-frequency and four mid-frequency antennas are loaded in the vacant area of the metantenna, forming a shared aperture MIMO antenna covering 2-3.36 GHz and 3.37-5.11 GHz, respectively. Frequency selective surfaces (FSSs) with band-pass characteristics are loaded on the arms of dipole to enable electromagnetic wave transmission of 5.3-6.9 GHz, minimizing its impact on the high-frequency antenna’s radiation characteristics. The scattering characteristics of dipoles also allow for RCS reduction within 2-4 GHz. Besides, additional layers controlling RCS (ALCR) are loaded on the edges of the MIMO metantenna to further reduce RCS within 2-4 GHz. Ultimately, a radiation bandwidth of 110.1% covering 2-6.9 GHz is achieved, covering almost S and C bands, with a low-scattering bandwidth of 2-12.2 GHz covering S, C and X bands, achieving an RCSR of 9 dB within the frequency band.
- 29 August 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (18) , 38466-38482
Tri-band shared aperture MIMO metantenna with broadband low scattering characteristics
In this paper, a triple band shared aperture multiple input multiple output (MIMO) antenna is proposed, with each antenna capable of reducing radar cross section (RCS). The RCS reduction (RCSR) of 4-14 GHz is accomplished through a chessboard-distributed dual-layer polarization conversion metasurface (PCM). The PCM is fed directly by an L-shaped branch, forming a metantenna covering 5.3-6.9 GHz and is assembled into a 4×2 ±45° dual-polarized MIMO antenna, with isolation exceeding 20 dB without extra decoupling technology. A low-frequency and four mid-frequency antennas are loaded in the vacant area of the metantenna, forming a shared aperture MIMO antenna covering 2-3.36 GHz and 3.37-5.11 GHz, respectively. Frequency selective surfaces (FSSs) with band-pass characteristics are loaded on the arms of dipole to enable electromagnetic wave transmission of 5.3-6.9 GHz, minimizing its impact on the high-frequency antenna’s radiation characteristics. The scattering characteristics of dipoles also allow for RCS reduction within 2-4 GHz. Besides, additional layers controlling RCS (ALCR) are loaded on the edges of the MIMO metantenna to further reduce RCS within 2-4 GHz. Ultimately, a radiation bandwidth of 110.1% covering 2-6.9 GHz is achieved, covering almost S and C bands, with a low-scattering bandwidth of 2-12.2 GHz covering S, C and X bands, achieving an RCSR of 9 dB within the frequency band.
- 12 August 2025
- Published by Wiley in Microwave and Optical Technology Letters
- Vol. 67 (8)
A Compact Low‐Profile Decoupling Scheme for Dual‐Band Dual‐Polarized Antenna Arrays
A low‐profile hybrid decoupling structure for dual‐band dual‐polarized antenna arrays is proposed in this letter. The decoupling structure consists of an artificial magnetic conductor (AMC) and a dual‐band resonance isolation net (RIN). The AMC reflector can not only reduce the profile, but also reduce the coupling in E‐plane, and the dual‐band RIN can suppress the coupling in both E‐plane and H‐plane. The profile of the proposed 2‐1‐2 staggered array is only 0.08λ 0 . The measured results show that various mutual couplings are suppressed with decoupling structures and the isolation is better than 20 and 22 dB in the low frequency band of 2.59–2.71 GHz and the high frequency band of 4.28–5.23 GHz. In addition, the improvement in channel capacity of the MIMO array also confirms that the decoupling structure has a significant influence on the promotion of communication quality.
- 12 August 2025
- Published by Wiley in Microwave and Optical Technology Letters
- Vol. 67 (8)
A Compact Low‐Profile Decoupling Scheme for Dual‐Band Dual‐Polarized Antenna Arrays
A low‐profile hybrid decoupling structure for dual‐band dual‐polarized antenna arrays is proposed in this letter. The decoupling structure consists of an artificial magnetic conductor (AMC) and a dual‐band resonance isolation net (RIN). The AMC reflector can not only reduce the profile, but also reduce the coupling in E‐plane, and the dual‐band RIN can suppress the coupling in both E‐plane and H‐plane. The profile of the proposed 2‐1‐2 staggered array is only 0.08λ 0 . The measured results show that various mutual couplings are suppressed with decoupling structures and the isolation is better than 20 and 22 dB in the low frequency band of 2.59–2.71 GHz and the high frequency band of 4.28–5.23 GHz. In addition, the improvement in channel capacity of the MIMO array also confirms that the decoupling structure has a significant influence on the promotion of communication quality.
- 7 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 73 (11) , 8601-8611
A Wideband Grating Lobe Suppression Scheme Based on Array Factor Reconfiguration and Its Application in Multibeam Antenna Arrays
This paper presents an ultra-wideband E-plane multi-beam antenna array with broadband grating lobe suppression characteristics, operating in the band of 6-18 GHz. Firstly, a grating lobe suppression scheme based on array factor reconfiguration is proposed, along with the corresponding design guidelines. Secondly, based on an ultra-compact ultra-wideband Vivaldi antenna array, a parasitic array and coupling structure corresponding to the array factor reconfiguration scheme are designed, achieving significant grating lobe suppression. For the high port coupling caused by the ultra-compact spacing, a decoupling structure with almost no loss of antenna efficiency is also designed, which extends the antenna’s operating bandwidth by 25% in the lower band. To further enhance practicality, the array is cascaded with a Rotman lens, forming a highly integrated, low-cost, high-performance multi-beam system. The fabricated prototype, along with simulation and measurement results, demonstrates good consistency, validating the effectiveness of the proposed design.
- 7 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 73 (11) , 8601-8611
A Wideband Grating Lobe Suppression Scheme Based on Array Factor Reconfiguration and Its Application in Multibeam Antenna Arrays
This paper presents an ultra-wideband E-plane multi-beam antenna array with broadband grating lobe suppression characteristics, operating in the band of 6-18 GHz. Firstly, a grating lobe suppression scheme based on array factor reconfiguration is proposed, along with the corresponding design guidelines. Secondly, based on an ultra-compact ultra-wideband Vivaldi antenna array, a parasitic array and coupling structure corresponding to the array factor reconfiguration scheme are designed, achieving significant grating lobe suppression. For the high port coupling caused by the ultra-compact spacing, a decoupling structure with almost no loss of antenna efficiency is also designed, which extends the antenna’s operating bandwidth by 25% in the lower band. To further enhance practicality, the array is cascaded with a Rotman lens, forming a highly integrated, low-cost, high-performance multi-beam system. The fabricated prototype, along with simulation and measurement results, demonstrates good consistency, validating the effectiveness of the proposed design.
- 18 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 73 (1) , 623-628
A Compact Vivaldi Antenna With Enhanced Bandwidth and Mismatch Suppression
In this communication, an ultra-wideband, wide-beam Vivaldi antenna is proposed, which applies the presented hybrid high-performance scheme to develop broadband and wide-angle domain detection for radar systems. Based on a comprehensive analysis of equivalent circuits at different frequencies, an impedance regulation technology for the lower band is proposed. More importantly, the application of current analysis methods is used to illustrate the mismatch problem caused by feedline resonance and eradicate it by introducing pin-loading technology. Additionally, the wide-beam property within the broadband is obtained by smartly optimizing the tapered slotline. The proposed antenna comprehensively achieves the multi-performance fusion of miniaturization, ultra-wideband, and wide beam, attaining a bandwidth of 0.5-28 GHz(VSWRL ×0.067λ L (λ L is the wavelength at the lowest operating frequency), and the beamwidth throughout the entire band is extremely considerable. Measured and simulated results demonstrate that the antenna has great prospects for broadband and wide-angle detection of ultra-small radar systems when used for reception.
- 18 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 73 (1) , 623-628
A Compact Vivaldi Antenna With Enhanced Bandwidth and Mismatch Suppression
In this communication, an ultra-wideband, wide-beam Vivaldi antenna is proposed, which applies the presented hybrid high-performance scheme to develop broadband and wide-angle domain detection for radar systems. Based on a comprehensive analysis of equivalent circuits at different frequencies, an impedance regulation technology for the lower band is proposed. More importantly, the application of current analysis methods is used to illustrate the mismatch problem caused by feedline resonance and eradicate it by introducing pin-loading technology. Additionally, the wide-beam property within the broadband is obtained by smartly optimizing the tapered slotline. The proposed antenna comprehensively achieves the multi-performance fusion of miniaturization, ultra-wideband, and wide beam, attaining a bandwidth of 0.5-28 GHz(VSWRL ×0.067λ L (λ L is the wavelength at the lowest operating frequency), and the beamwidth throughout the entire band is extremely considerable. Measured and simulated results demonstrate that the antenna has great prospects for broadband and wide-angle detection of ultra-small radar systems when used for reception.
- 9 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 23 (12) , 4867-4871
Wideband RCS Reduction for Circular-Polarized Slot Array Antennas Based on Composite Metasurface
This letter proposes a new method for reducing the RCS of circularly polarized antenna, utilizing a composite metasurface (CM) composed of frequency-selective rasorber (FSR) and polarimetric rotating-reflecting surface (PRRS) to reduce both out-of-band and in-band RCS of the antenna. The FSR consists of a lower-layer frequency selective surface (FSS) and an upper-layer lossy layer. The lossy layer is designed with periodic metallic patterns and integrated resistive loading, achieving high-efficiency wave absorption out of the antenna operating band while allowing wave transmission in the antenna's operating band. The PRRS is designed to effectively reduce in-band RCS by reshaping the scattering patterns within the operational frequency. This method addresses the issue of achieving both in-band and out-of-band RCS reduction for circularly polarized antennas, while also broadening the RCS reduction bandwidth. Experimental and simulation results show that the RCS reduction bandwidth ranges from 3.2 GHz to 19.6 GHz, with a relative bandwidth of 143.9%.
- 9 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 23 (12) , 4867-4871
Wideband RCS Reduction for Circular-Polarized Slot Array Antennas Based on Composite Metasurface
This letter proposes a new method for reducing the RCS of circularly polarized antenna, utilizing a composite metasurface (CM) composed of frequency-selective rasorber (FSR) and polarimetric rotating-reflecting surface (PRRS) to reduce both out-of-band and in-band RCS of the antenna. The FSR consists of a lower-layer frequency selective surface (FSS) and an upper-layer lossy layer. The lossy layer is designed with periodic metallic patterns and integrated resistive loading, achieving high-efficiency wave absorption out of the antenna operating band while allowing wave transmission in the antenna's operating band. The PRRS is designed to effectively reduce in-band RCS by reshaping the scattering patterns within the operational frequency. This method addresses the issue of achieving both in-band and out-of-band RCS reduction for circularly polarized antennas, while also broadening the RCS reduction bandwidth. Experimental and simulation results show that the RCS reduction bandwidth ranges from 3.2 GHz to 19.6 GHz, with a relative bandwidth of 143.9%.
- 26 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 72 (11) , 8124-8134
A Wideband Miniaturized Dual-Polarized Antenna Based on Wide-Arm Dipole With Mode Analysis and Recombination
In this study, a wideband miniaturized dual-polarized antenna based on a wide-arm dipole antenna through mode analysis and recombination is proposed. First, the antenna radiating arms are widened to enhance the antenna design freedom. By analyzing the wide-arm dipole, mode1 and mode2 are obtained. Second, slots are cut horizontally on both sides of the antenna to optimize the current path of mode1 and to obtain mode3. Meanwhile, the introduced “semi-rectangular” shaped current further reduces the physical dimensions of the antenna effectively and optimizes the impedance matching in full-wave modes. Afterward, with the help of three longitudinal slots, the third-order mode (mode4) and the fourth-order mode (mode5) of mode1 are shifted into the operating band. Finally, by adjusting the length of the slots to control the distribution of the five modes, the bandwidth of the proposed antenna is greatly improved. A four-notch resonant loop is loaded on the top of the antenna to enhance gain. Two single-polarized antennas are placed orthogonally to obtain the designed dual-polarized antenna. Based on the above principle, a wideband antenna is designed and fabricated. The proposed antenna exhibits a reflection coefficient of less than −15 dB in the operating band (1.3–3.0 GHz) with smaller physical dimensions of $0.36\lambda _{\max } \times 0.26\lambda _{\max } \times 0.36\lambda _{\max }$ . Additionally, the peak gain of the antenna achieves 5.6 dBi and the efficiency of the antenna is maintained above 80%. Compared with a traditional dipole, the bandwidth of the proposed antenna has been greatly improved, exhibiting a broad application prospect in the detection domain.
- 26 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 72 (11) , 8124-8134
A Wideband Miniaturized Dual-Polarized Antenna Based on Wide-Arm Dipole With Mode Analysis and Recombination
In this study, a wideband miniaturized dual-polarized antenna based on a wide-arm dipole antenna through mode analysis and recombination is proposed. First, the antenna radiating arms are widened to enhance the antenna design freedom. By analyzing the wide-arm dipole, mode1 and mode2 are obtained. Second, slots are cut horizontally on both sides of the antenna to optimize the current path of mode1 and to obtain mode3. Meanwhile, the introduced “semi-rectangular” shaped current further reduces the physical dimensions of the antenna effectively and optimizes the impedance matching in full-wave modes. Afterward, with the help of three longitudinal slots, the third-order mode (mode4) and the fourth-order mode (mode5) of mode1 are shifted into the operating band. Finally, by adjusting the length of the slots to control the distribution of the five modes, the bandwidth of the proposed antenna is greatly improved. A four-notch resonant loop is loaded on the top of the antenna to enhance gain. Two single-polarized antennas are placed orthogonally to obtain the designed dual-polarized antenna. Based on the above principle, a wideband antenna is designed and fabricated. The proposed antenna exhibits a reflection coefficient of less than −15 dB in the operating band (1.3–3.0 GHz) with smaller physical dimensions of $0.36\lambda _{\max } \times 0.26\lambda _{\max } \times 0.36\lambda _{\max }$ . Additionally, the peak gain of the antenna achieves 5.6 dBi and the efficiency of the antenna is maintained above 80%. Compared with a traditional dipole, the bandwidth of the proposed antenna has been greatly improved, exhibiting a broad application prospect in the detection domain.
- 20 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 23 (10) , 2969-2973
Ferrite-Loaded Magnetically Reconfigurable SIW Magnetic Dipole Antenna With Tunable Frequencies
A novel ferrite-loaded magnetically reconfigurable substrate integrated waveguide (SIW) magnetic dipole antenna with frequency tunability is proposed. The antenna has a SIW construction with a three-sided short circuit and a one-sided open circuit, with the ferrite material inserted into the substrate. The frequency reconfiguration is accomplished by altering the bias magnetic field. The simulation results reveal that the tunable frequency range is more than 5.2% (from 5.26 to 5.54 GHz) for the lower bias magnetic field and 7.1% (from 4.64 to 4.98 GHz) for the higher bias magnetic field. In the frequency tuning range, the antenna boasts a radiation efficiency of over 70%, a gain of over 1.6 dBi, and a stable radiation pattern. The proposed antenna is fabricated and measured. It represents an excellent reconfigurable scheme for 5G applications.
- 20 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 23 (10) , 2969-2973
Ferrite-Loaded Magnetically Reconfigurable SIW Magnetic Dipole Antenna With Tunable Frequencies
A novel ferrite-loaded magnetically reconfigurable substrate integrated waveguide (SIW) magnetic dipole antenna with frequency tunability is proposed. The antenna has a SIW construction with a three-sided short circuit and a one-sided open circuit, with the ferrite material inserted into the substrate. The frequency reconfiguration is accomplished by altering the bias magnetic field. The simulation results reveal that the tunable frequency range is more than 5.2% (from 5.26 to 5.54 GHz) for the lower bias magnetic field and 7.1% (from 4.64 to 4.98 GHz) for the higher bias magnetic field. In the frequency tuning range, the antenna boasts a radiation efficiency of over 70%, a gain of over 1.6 dBi, and a stable radiation pattern. The proposed antenna is fabricated and measured. It represents an excellent reconfigurable scheme for 5G applications.