Baoxiang Peng
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Baoxiang Peng has a total of 164 co-authors. Here are the top co-authors by number of shared publications:
- Martin Muhler
Laboratory of Industrial Chemistry, Ruhr University Bochum, Bochum, Germany
22 shared publications Julia Büker
Laboratory of Industrial Chemistry Ruhr University Bochum Universitätsstr. 150 44780 Bochum Germany
8 shared publicationsTobias Falk
Laboratory of Industrial Chemistry, Ruhr University Bochum, D-44780 Bochum, Germany
8 shared publicationsMartin Muhler
Laboratory of Industrial Chemistry Ruhr University Bochum 44780 Bochum Germany
6 shared publicationsQi Fu
Laboratory of Industrial Chemistry Ruhr-University Bochum 44780 Bochum Germany
6 shared publications- Johannes A. Lercher
Pacific Northwest National Laboratory
5 shared publications
Latest Publications
- Open Access
- 26 April 2024
- Published by Wiley in ChemSusChem
- Vol. 17 (22) , e202300871
Efficient Atomically Dispersed Co/N‐C Catalysts for Formic Acid Dehydrogenation and Transfer Hydrodeoxygenation of Vanillin
Atomically dispersed catalysts have gained considerable attention due to their unique properties and high efficiency in various catalytic reactions. Herein, a series of Co/N‐doped carbon (N‐C) catalysts was prepared using a metal‐lignin coordination strategy and employed in formic acid dehydrogenation (FAD) and hydrodeoxygenation (HDO) of vanillin. The atomically dispersed Co/N‐C catalysts showed outstanding activity, acid resistance, and long‐term stability in FAD. The improved activity and stability may be attributed to the high dispersion of Co species, increased surface area, and strong Co−N interactions. XPS and XAS characterization revealed the formation of Co‐N3 centers, which are assumed to be the active sites. In addition, DFT calculations demonstrated that the adsorption of formic acid on single‐atom Co was stronger than that on Co13 clusters, which may explain the high catalytic activity. The Co/N‐C catalyst also showed promising performance in the transfer HDO of vanillin with formic acid, without any external additional molecular H2.
- 26 April 2024
- Published by Wiley in ChemSusChem
- Vol. 17 (22) , e202300871
Open AccessEfficient Atomically Dispersed Co/N‐C Catalysts for Formic Acid Dehydrogenation and Transfer Hydrodeoxygenation of Vanillin
Atomically dispersed catalysts have gained considerable attention due to their unique properties and high efficiency in various catalytic reactions. Herein, a series of Co/N‐doped carbon (N‐C) catalysts was prepared using a metal‐lignin coordination strategy and employed in formic acid dehydrogenation (FAD) and hydrodeoxygenation (HDO) of vanillin. The atomically dispersed Co/N‐C catalysts showed outstanding activity, acid resistance, and long‐term stability in FAD. The improved activity and stability may be attributed to the high dispersion of Co species, increased surface area, and strong Co−N interactions. XPS and XAS characterization revealed the formation of Co‐N3 centers, which are assumed to be the active sites. In addition, DFT calculations demonstrated that the adsorption of formic acid on single‐atom Co was stronger than that on Co13 clusters, which may explain the high catalytic activity. The Co/N‐C catalyst also showed promising performance in the transfer HDO of vanillin with formic acid, without any external additional molecular H2.
- 8 February 2024
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 36 (4) , 2049-2060
Macroporous Carbon-Supported Fe-Based Catalysts for the Solvent-Free Oxidative Coupling of Benzylamine
- 8 February 2024
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 36 (4) , 2049-2060
Macroporous Carbon-Supported Fe-Based Catalysts for the Solvent-Free Oxidative Coupling of Benzylamine
- 16 October 2023
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 57 (42) , 16121-16130
Copper Site Motion Promotes Catalytic NOx Reduction under Zeolite Confinement
Ammonia-mediated selective catalytic reduction (NH3-SCR) is currently the key approach to abate nitrogen oxides (NOx) emitted from heavy-duty lean-burn vehicles. The state-of-art NH3-SCR catalysts, namely, copper ion-exchanged chabazite (Cu-CHA) zeolites, perform rather poorly at low temperatures (below 200 °C) and are thus incapable of eliminating effectively NOx emissions under cold-start conditions. Here, we demonstrate a significant promotion of low-temperature NOx reduction by reinforcing the dynamic motion of zeolite-confined Cu sites during NH3-SCR. Combining complex impedance-based in situ spectroscopy (IS) and extended density-functional tight-binding molecular dynamics simulation, we revealed an environment- and temperature-dependent nature of the dynamic Cu motion within the zeolite lattice. Further coupling in situ IS with infrared spectroscopy allows us to unravel the critical role of monovalent Cu in the overall Cu mobility at a molecular level. Based on these mechanistic understandings, we elicit a boost of NOx reduction below 200 °C by reinforcing the dynamic Cu motion in various Cu-zeolites (Cu-CHA, Cu-ZSM-5, Cu-Beta, etc.) via facile postsynthesis treatments, either in a reductive mixture at low temperatures (below 250 °C) or in a nonoxidative atmosphere at high temperatures (above 450 °C).
- 16 October 2023
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 57 (42) , 16121-16130
Copper Site Motion Promotes Catalytic NOx Reduction under Zeolite Confinement
Ammonia-mediated selective catalytic reduction (NH3-SCR) is currently the key approach to abate nitrogen oxides (NOx) emitted from heavy-duty lean-burn vehicles. The state-of-art NH3-SCR catalysts, namely, copper ion-exchanged chabazite (Cu-CHA) zeolites, perform rather poorly at low temperatures (below 200 °C) and are thus incapable of eliminating effectively NOx emissions under cold-start conditions. Here, we demonstrate a significant promotion of low-temperature NOx reduction by reinforcing the dynamic motion of zeolite-confined Cu sites during NH3-SCR. Combining complex impedance-based in situ spectroscopy (IS) and extended density-functional tight-binding molecular dynamics simulation, we revealed an environment- and temperature-dependent nature of the dynamic Cu motion within the zeolite lattice. Further coupling in situ IS with infrared spectroscopy allows us to unravel the critical role of monovalent Cu in the overall Cu mobility at a molecular level. Based on these mechanistic understandings, we elicit a boost of NOx reduction below 200 °C by reinforcing the dynamic Cu motion in various Cu-zeolites (Cu-CHA, Cu-ZSM-5, Cu-Beta, etc.) via facile postsynthesis treatments, either in a reductive mixture at low temperatures (below 250 °C) or in a nonoxidative atmosphere at high temperatures (above 450 °C).
- 28 September 2023
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 13 (20) , 13167-13180
Regulating Keto–Enol Tautomerism of β-Ketoenamine Covalent–Organic Frameworks for Photocatalytic Oxidative Coupling of Amines
- 28 September 2023
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 13 (20) , 13167-13180
Regulating Keto–Enol Tautomerism of β-Ketoenamine Covalent–Organic Frameworks for Photocatalytic Oxidative Coupling of Amines
- 9 August 2023
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 57 (33) , 12465-12475
Revealing the Formation and Reactivity of Cage-Confined Cu Pairs in Catalytic NOx Reduction over Cu-SSZ-13 Zeolites by In Situ UV–Vis Spectroscopy and Time-Dependent DFT Calculation
The low-temperature mechanism of chabazite-type small-pore Cu-SSZ-13 zeolite, a state-of-the-art catalyst for ammonia-assisted selective reduction (NH3-SCR) of toxic NOx pollutants from heavy-duty vehicles, remains a debate and needs to be clarified for further improvement of NH3-SCR performance. In this study, we established experimental protocols to follow the dynamic redox cycling (i.e., CuII ↔ CuI) of Cu sites in Cu-SSZ-13 during low-temperature NH3-SCR catalysis by in situ ultraviolet-visible spectroscopy and in situ infrared spectroscopy. Further integrating the in situ spectroscopic observations with time-dependent density functional theory calculations allows us to identify two cage-confined transient states, namely, the O2-bridged Cu dimers (i.e., μ-η2:η2-peroxodiamino dicopper) and the proximately paired, chemically nonbonded CuI(NH3)2 sites, and to confirm the CuI(NH3)2 pair as a precursor to the O2-bridged Cu dimer. Comparative transient experiments reveal a particularly high reactivity of the CuI(NH3)2 pairs for NO-to-N2 reduction at low temperatures. Our study demonstrates direct experimental evidence for the transient formation and high reactivity of proximately paired CuI sites under zeolite confinement and provides new insights into the monomeric-to-dimeric Cu transformation for completing the Cu redox cycle in low-temperature NH3-SCR catalysis over Cu-SSZ-13.
- 9 August 2023
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 57 (33) , 12465-12475
Revealing the Formation and Reactivity of Cage-Confined Cu Pairs in Catalytic NOx Reduction over Cu-SSZ-13 Zeolites by In Situ UV–Vis Spectroscopy and Time-Dependent DFT Calculation
The low-temperature mechanism of chabazite-type small-pore Cu-SSZ-13 zeolite, a state-of-the-art catalyst for ammonia-assisted selective reduction (NH3-SCR) of toxic NOx pollutants from heavy-duty vehicles, remains a debate and needs to be clarified for further improvement of NH3-SCR performance. In this study, we established experimental protocols to follow the dynamic redox cycling (i.e., CuII ↔ CuI) of Cu sites in Cu-SSZ-13 during low-temperature NH3-SCR catalysis by in situ ultraviolet-visible spectroscopy and in situ infrared spectroscopy. Further integrating the in situ spectroscopic observations with time-dependent density functional theory calculations allows us to identify two cage-confined transient states, namely, the O2-bridged Cu dimers (i.e., μ-η2:η2-peroxodiamino dicopper) and the proximately paired, chemically nonbonded CuI(NH3)2 sites, and to confirm the CuI(NH3)2 pair as a precursor to the O2-bridged Cu dimer. Comparative transient experiments reveal a particularly high reactivity of the CuI(NH3)2 pairs for NO-to-N2 reduction at low temperatures. Our study demonstrates direct experimental evidence for the transient formation and high reactivity of proximately paired CuI sites under zeolite confinement and provides new insights into the monomeric-to-dimeric Cu transformation for completing the Cu redox cycle in low-temperature NH3-SCR catalysis over Cu-SSZ-13.
- 3 March 2023
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 127 (10) , 5029-5038
LaCo1–xFexO3 Nanoparticles in Cyclohexene Oxidation
- 3 March 2023
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 127 (10) , 5029-5038
LaCo1–xFexO3 Nanoparticles in Cyclohexene Oxidation
- Open Access
- 14 February 2023
- Published by Wiley in Angewandte Chemie
- Vol. 135 (12)
Unterscheidung zwischen sauren und basischen Oberflächenhydroxylgruppen auf Metalloxiden durch Fluoridsubstitution: Eine Fallstudie am Beispiel von defektreichem, blauem TiO2 aus der laserbasierten Defekterzeugung
Sowohl oberflächennahe Sauerstofffehlstellen als auch Hydroxylgruppen an der Oberfläche spielen eine entscheidende Rolle in der Katalyse. Dennoch bleiben die genauen Zusammenhänge durch die limitierte analytische Zugänglichkeit dieser Struktureigenschaften oft wenig verstanden. Zur selektiven Quantifizierung der sauren und basischen Oberflächenhydroxide wurde in dieser Studie deshalb eine Fluoridsubstitution am Beispiel zweier Serien von TiO2 (Rutil und P25) untersucht, welche eine zunehmende Dichte an Ti3+‐Sauerstofffehlstellen aufwiesen. Die Materialien sind durch gepulster Laserdefekt‐Engineering in Flüssigkeit (PUDEL) hergestellt worden. Aus EPR‐ und EEL‐Spektroskopie geht hervor, dass sich die lasergenerierten Ti3+ beim Rutil potentiell in der Nähe der Partikeloberfläche befinden, während diese beim P25 tiefer in den Partikeln vorzuliegen scheinen. Anhand der pH‐abhängigen Fluoridsubstitution zeigt sich, dass sich auf dem laserbehandelten Rutil zunehmend saure (verbrückende) Hydroxylgruppen gebildet haben, welche potentiell auf die Hydrierung der lasergenerierten, oberflächennahen Ti3+‐Zentren zurückgeht. Beim P25 blieb die Dichte an Hydroxylgruppen trotz nachweislicher Bildung von Ti3+‐Zentren bei der Laserbehandlung unverändert. Wir gehen davon aus, dass die hier eingesetzte pH‐abhängige Substitutionsmethode von Hydroxiden durch Fluoride zukünftig eine einfache und robuste Charakterisierung von Oberflächen‐OH und deren Korrelation mit Defekten in Metalloxiden zulassen wird.
- 14 February 2023
- Published by Wiley in Angewandte Chemie
- Vol. 135 (12)
Open AccessUnterscheidung zwischen sauren und basischen Oberflächenhydroxylgruppen auf Metalloxiden durch Fluoridsubstitution: Eine Fallstudie am Beispiel von defektreichem, blauem TiO2 aus der laserbasierten Defekterzeugung
Sowohl oberflächennahe Sauerstofffehlstellen als auch Hydroxylgruppen an der Oberfläche spielen eine entscheidende Rolle in der Katalyse. Dennoch bleiben die genauen Zusammenhänge durch die limitierte analytische Zugänglichkeit dieser Struktureigenschaften oft wenig verstanden. Zur selektiven Quantifizierung der sauren und basischen Oberflächenhydroxide wurde in dieser Studie deshalb eine Fluoridsubstitution am Beispiel zweier Serien von TiO2 (Rutil und P25) untersucht, welche eine zunehmende Dichte an Ti3+‐Sauerstofffehlstellen aufwiesen. Die Materialien sind durch gepulster Laserdefekt‐Engineering in Flüssigkeit (PUDEL) hergestellt worden. Aus EPR‐ und EEL‐Spektroskopie geht hervor, dass sich die lasergenerierten Ti3+ beim Rutil potentiell in der Nähe der Partikeloberfläche befinden, während diese beim P25 tiefer in den Partikeln vorzuliegen scheinen. Anhand der pH‐abhängigen Fluoridsubstitution zeigt sich, dass sich auf dem laserbehandelten Rutil zunehmend saure (verbrückende) Hydroxylgruppen gebildet haben, welche potentiell auf die Hydrierung der lasergenerierten, oberflächennahen Ti3+‐Zentren zurückgeht. Beim P25 blieb die Dichte an Hydroxylgruppen trotz nachweislicher Bildung von Ti3+‐Zentren bei der Laserbehandlung unverändert. Wir gehen davon aus, dass die hier eingesetzte pH‐abhängige Substitutionsmethode von Hydroxiden durch Fluoride zukünftig eine einfache und robuste Charakterisierung von Oberflächen‐OH und deren Korrelation mit Defekten in Metalloxiden zulassen wird.
- Open Access
- 14 February 2023
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 62 (12) , e202213968
Differentiating between Acidic and Basic Surface Hydroxyls on Metal Oxides by Fluoride Substitution: A Case Study on Blue TiO2 from Laser Defect Engineering
Both oxygen vacancies and surface hydroxyls play a crucial role in catalysis. Yet, their relationship is not often explored. Herein, we prepare two series of TiO2 (rutile and P25) with increasing oxygen deficiency and Ti3+ concentration by pulsed laser defect engineering in liquid (PUDEL), and selectively quantify the acidic and basic surface OH by fluoride substitution. As indicated by EPR spectroscopy, the laser‐generated Ti3+ exist near the surface of rutile, but appear to be deeper in the bulk for P25. Fluoride substitution shows that extra acidic bridging OH are selectively created on rutile, while the surface OH density remains constant for P25. These observations suggest near‐surface Ti3+ are highly related to surface bridging OH, presumably the former increasing the electron density of the bridging oxygen to form more of the latter. We anticipate that fluoride substitution will enable better characterization of surface OH and its correlation with defects in metal oxides.
- 14 February 2023
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 62 (12) , e202213968
Open AccessDifferentiating between Acidic and Basic Surface Hydroxyls on Metal Oxides by Fluoride Substitution: A Case Study on Blue TiO2 from Laser Defect Engineering
Both oxygen vacancies and surface hydroxyls play a crucial role in catalysis. Yet, their relationship is not often explored. Herein, we prepare two series of TiO2 (rutile and P25) with increasing oxygen deficiency and Ti3+ concentration by pulsed laser defect engineering in liquid (PUDEL), and selectively quantify the acidic and basic surface OH by fluoride substitution. As indicated by EPR spectroscopy, the laser‐generated Ti3+ exist near the surface of rutile, but appear to be deeper in the bulk for P25. Fluoride substitution shows that extra acidic bridging OH are selectively created on rutile, while the surface OH density remains constant for P25. These observations suggest near‐surface Ti3+ are highly related to surface bridging OH, presumably the former increasing the electron density of the bridging oxygen to form more of the latter. We anticipate that fluoride substitution will enable better characterization of surface OH and its correlation with defects in metal oxides.
- 27 January 2023
- Published by Elsevier in Journal of Catalysis
- Vol. 418, 237-246
Aerobic oxidative lactonization of diols at room temperature over defective titanium-based oxides in water
- 27 January 2023
- Published by Elsevier in Journal of Catalysis
- Vol. 418, 237-246
Aerobic oxidative lactonization of diols at room temperature over defective titanium-based oxides in water
- Open Access
- 2 December 2022
- Published by Wiley in ChemCatChem
- Vol. 15 (1)
Concepts of Heterogeneously Catalyzed Liquid‐Phase Oxidation of Cyclohexene with tert‐Butyl Hydroperoxide, Hydrogen Peroxide and Molecular Oxygen
The oxidation of hydrocarbons is of great significance for the chemical industry as it provides access to valuable functionalized chemicals. The oxidation of cyclohexene has raised much interest because it enables the direct synthesis of adipic acid, which is an important building block in polymer chemistry. However, the selective oxidation of cyclohexene is rather challenging due to its two reactive centers so that epoxidation or allylic oxidation may occur leading to a variety of products. Whether the oxidation takes place at the allylic C−H bond or at the C=C bond is strongly influenced by the chosen oxidant and catalyst, and different reaction mechanisms can occur. Therefore, this concept article aims at giving a broad overview of the recent advances in the selective cyclohexene oxidation over heterogeneous transition metal‐based catalysts using environmentally benign oxidants like tert‐butyl hydroperoxide, H2O2 and molecular O2.
- 2 December 2022
- Published by Wiley in ChemCatChem
- Vol. 15 (1)
Open AccessConcepts of Heterogeneously Catalyzed Liquid‐Phase Oxidation of Cyclohexene with tert‐Butyl Hydroperoxide, Hydrogen Peroxide and Molecular Oxygen
The oxidation of hydrocarbons is of great significance for the chemical industry as it provides access to valuable functionalized chemicals. The oxidation of cyclohexene has raised much interest because it enables the direct synthesis of adipic acid, which is an important building block in polymer chemistry. However, the selective oxidation of cyclohexene is rather challenging due to its two reactive centers so that epoxidation or allylic oxidation may occur leading to a variety of products. Whether the oxidation takes place at the allylic C−H bond or at the C=C bond is strongly influenced by the chosen oxidant and catalyst, and different reaction mechanisms can occur. Therefore, this concept article aims at giving a broad overview of the recent advances in the selective cyclohexene oxidation over heterogeneous transition metal‐based catalysts using environmentally benign oxidants like tert‐butyl hydroperoxide, H2O2 and molecular O2.