Kostiantyn Kulyk

Nitric oxide NO, mediates inflammatory and thrombotic processes and designing biomaterials capable of releasing NO in contact with biological tissues is considered to be a major factor aimed at improving their bio- and haemocompatibility and antibacterial properties. Their NO-releasing capacity however is limited by the amount of the NO-containing substance incorporated in the bulk or immobilised on the surface of a biomaterial. An alternative approach is based on the design of a material generating nitric oxide from endogenous NO bearing metabolites by their catalytic decomposition. It offers, at least in theory, an unlimited source of NO for as long as the material remains in contact with blood and the catalyst maintains its activity. In this paper we studied the catalytic properties of novel nanostructured CuO/SiO₂ catalysts in generating NO by decomposition of S-nitrosoglutathione (GSNO) in vitro. CuO/SiO₂ catalysts with different CuO loadings were synthesized by chemisorption of copper(II) acetylacetonate on fumed nanosilica followed by calcination. CuO content was controlled by a number of chemisorption–calcination cycles. Fourier-transform infrared spectroscopy and thermogravimetric analysis confirmed the formation of CuO/SiO₂ nanoparticles (NPs) with particle size of CuO phase in the range from 71 to 88 nm. Scanning electron microscopy images revealed a uniform distribution of NPs without their sintering or agglomeration. All the materials of the CuO/SiO₂ NP series exhibited NO-generating activity from GSNO confirmed by the Griess assay and by measuring the concentration of nitrite and nitrate anions in model solutions such as phosphate buffered saline and bovine serum. This activity is dependent on the material specific surface area and CuO exposure on the surface rather than CuO bulk content. The rate of NO production increased at higher initial concentration of the NO-bearing substrate studied in the range between 0.01 mM and 1.0 mM RSNO, which covers its physiological level. CuO/SiO₂ NPs can be used to design polymers with NO generating properties at blood-biomaterial interface which are expected to have improved biocompatibility thus enhancing their potential for medical applications such as surgical tubing, peripheral venous catheters, auxiliary blood circulation devices and drug-eluting balloons.

Here we report on the gas-phase interactions between protonated enantiopure amino acids (l- and d-enantiomers of Met, Phe, and Trp) and chiral target gases [(R)- and (S)-2-butanol, and (S)-1-phenylethanol] in 0.1–10.0 eV low-energy collisions. Two major processes are seen to occur over this collision energy regime, collision-induced dissociation and ion-molecule complex formation. Both processes were found to be independent of the stereo-chemical composition of the interacting ions and targets. These data shed light on the currently debated mechanisms of gas-phase chiral selectivity by demonstrating the inapplicability of the three-point model to these interactions, at least under single collision conditions.

Valeric acid is an important renewable platform chemical that can be produced efficiently from lignocellulosic biomass. Upgrading of valeric acid by catalytic pyrolysis has the potential to produce value added biofuels and chemicals on an industrial scale. Understanding the different mechanisms involved in the thermal transformations of valeric acid on the surface of nanometer‐sized oxides is important for the development of efficient heterogeneously catalyzed pyrolytic conversion techniques. In this work, the thermal decomposition of valeric acid on the surface of nanoscale SiO₂, γ‐Al₂O₃, CeO₂/SiO₂, Al₂O₃/SiO₂ and TiO₂/SiO₂ has been investigated by temperature‐programmed desorption mass spectrometry (TPD MS). Fourier transform infrared spectroscopy (FTIR) has also been used to investigate the structure of valeric acid complexes on the oxide surfaces. Two main products of pyrolytic conversion were observed to be formed depending on the nano‐catalyst used—dibutylketone and propylketene. Mechanisms of ketene and ketone formation from chemisorbed fragments of valeric acid are proposed and the kinetic parameters of the corresponding reactions were calculated. It was found that the activation energy of ketenization decreases in the order SiO₂>γ‐Al₂O₃>TiO₂/SiO₂>Al₂O₃/SiO₂, and the activation energy of ketonization decreases in the order γ‐Al₂O₃>CeO₂/SiO₂. Nano‐oxide CeO₂/SiO₂ was found to selectively catalyze the ketonization reaction.

We report on studies of collisions between 3 keV Ar⁺ projectile ions and neutral targets of isolated 1,3-butadiene (C₄H₆) molecules and cold, loosely bound clusters of these molecules.

In this work we report the stereo‐dependent collision‐induced dissociation (CID) of proton‐bound complexes of tryptophan and 2‐butanol. The dissociation efficiency was measured as a function of collision energy in single collision mode. The homochiral complex was found to be less stable against CID than a heterochiral one. Additional gas dependence measurements were performed with diastereomeric complexes that confirm the findings.

Polydimethylsiloxane (PDMS) is a widely used organosilicon polymer often employed in formulations with fine oxide particles for various high temperature applications. Although PDMS is considered to be thermally stable and chemically inert, it is not always clear how the oxide filler influences its thermoresistance, decomposition chemistry and what reactive products are formed in the underlying thermal reactions. In this work we use temperature programmed desorption mass spectrometry (TPD MS) to study the pyrolysis of PDMS and its composites with nanosized silica and ceria/silica. Our results suggest that the elusive organosilicon compound - dimethylsilanone is generated from PDMS over a broad temperature range (in some cases starting at 70${\deg}$C). The presence of nano-oxides catalyzed this process. Ions characteristic of the fragmentation of dimethylsilanone under electron ionization were assigned with the aid of DFT structure calculations. Possible reaction mechanisms for generating dimethylsilanone were discussed in the context of the calculated kinetic parameters. Observed accompanying products of PDMS pyrolysis, such as tetramethylcyclodisiloxane and hexamethylcyclotrisiloxane, indicate that multiple channels are involved in the dimethylsilanone release.

Temperature‐programmed desorption mass spectrometry (TPD MS) was used to study the pyrolysis of PDMS and its composites with nanosized silica and ceria/silica. The results suggest that the elusive organosilicon compound, dimethylsilanone, is generated from PDMS over a broad temperature range (in some cases starting at 70 °C). The presence of nano‐oxides catalyzes this process. Ions characteristic of the fragmentation of dimethylsilanone under electron ionization are assigned with the aid of DFT structure calculations. Possible reaction mechanisms for dimethylsilanone generation are discussed in the context of the calculated kinetic parameters. Observed accompanying products of PDMS pyrolysis, such as tetramethylcyclodisiloxane and hexamethylcyclotrisiloxane, indicate that multiple channels are involved in the dimethylsilanone release.