Alexey Sepman
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Alexey Sepman has a total of 42 co-authors. Here are the top co-authors by number of shared publications:
Henrik Wiinikka
RISE ETC
10 shared publications- Henrik Wiinikka
RISE Energy Technology Center AB
7 shared publications - Sai Likitha Siddanathi
Division of Fluid and Experimental Mechanics, Luleå University of Technology, SE-971 87 Luleå, Sweden
6 shared publications Johannes Fernberg
5 shared publicationsFredrik Normann
4 shared publications- Lars-Göran Westerberg
Division of Fluid and Experimental Mechanics, Luleå University of Technology, SE-971 87 Luleå, Sweden
4 shared publications
Latest Publications
- 11 June 2026
- Published by Optica Publishing Group in Applied Optics
- Vol. 65 (18) , 6050
In situ TDLAS diagnostics of nitric oxide in combustion and plasma heated gases
A mid-IR TDLAS sensor for NO measurements in high-temperature environments is presented. The diagnostic targets the strong NO transition at 1977.27cm −1 , which provides low spectral interference and weak temperature sensitivity, thus reducing the effect of temperature inhomogeneity along the optical path on the retrieved path-averaged NO concentration. The diagnostic was validated in plasma-heated gases with H 2 O vapor and in pilot-scale biomass/hydrogen combustion at temperatures up to 1450 K and H 2 O mole fractions up to 30%. NO concentration obtained by fitting HITEMP-based spectra agreed with FTIR measurements within 15%, with estimated uncertainties of 20%. The sensor achieved a detection limit of about 50 ppm·m. Neighboring H 2 O transitions were negligible at lab-scale but required in pilot-scale fitting.
- 11 June 2026
- Published by Optica Publishing Group in Applied Optics
- Vol. 65 (18) , 6050
In situ TDLAS diagnostics of nitric oxide in combustion and plasma heated gases
A mid-IR TDLAS sensor for NO measurements in high-temperature environments is presented. The diagnostic targets the strong NO transition at 1977.27cm −1 , which provides low spectral interference and weak temperature sensitivity, thus reducing the effect of temperature inhomogeneity along the optical path on the retrieved path-averaged NO concentration. The diagnostic was validated in plasma-heated gases with H 2 O vapor and in pilot-scale biomass/hydrogen combustion at temperatures up to 1450 K and H 2 O mole fractions up to 30%. NO concentration obtained by fitting HITEMP-based spectra agreed with FTIR measurements within 15%, with estimated uncertainties of 20%. The sensor achieved a detection limit of about 50 ppm·m. Neighboring H 2 O transitions were negligible at lab-scale but required in pilot-scale fitting.
- Open Access
- 4 June 2026
- Published by Elsevier in SSRN Electronic Journal
Sensitivity of NOX Formation to Nitrogen Release and Char Surface Area: An Estimation Approach for CFD Modelling of Pulverized Coal Combustion
To effectively mitigate NOX emissions in pulverized coal combustion, Computational Fluid Dynamics (CFD) is frequently employed as a predictive tool. Because fuel-bound nitrogen is the primary source of NOX in these applications, modeling largely relies on coal characterization—data that are often uncertain even with costly experimental measurements.This study introduces a systematic framework for estimating missing fuel-nitrogen characteristics from standard proximate and ultimate analyses based on correlations from rapid coal devolatilization experiments. Utilizing a conventional CFD approach, we simulated coal combustion in a 150-kW facility, which mimics rotary kiln conditions. A sensitivity analysis evaluates the impact of uncertainties in volatile nitrogen yields, precursor compositions (HCN/NH3), and char surface reactivity on NOX predictions. Results indicate that input uncertainties may account for up to 25% of the total predicted NOX. The ratio of nitrogen released as volatiles versus char-bound nitrogen and the initial char surface area of the coal particles are both critical parameters, while variations in volatile precursor ratios had a negligible effect (<1%). The model was validated against measured NOX emissions from the 150-kW facility, demonstrating that while the framework provides a robust estimation tool, high-fidelity characterization of char properties remains vital for precise emission modelling.
- 4 June 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessSensitivity of NOX Formation to Nitrogen Release and Char Surface Area: An Estimation Approach for CFD Modelling of Pulverized Coal Combustion
To effectively mitigate NOX emissions in pulverized coal combustion, Computational Fluid Dynamics (CFD) is frequently employed as a predictive tool. Because fuel-bound nitrogen is the primary source of NOX in these applications, modeling largely relies on coal characterization—data that are often uncertain even with costly experimental measurements.This study introduces a systematic framework for estimating missing fuel-nitrogen characteristics from standard proximate and ultimate analyses based on correlations from rapid coal devolatilization experiments. Utilizing a conventional CFD approach, we simulated coal combustion in a 150-kW facility, which mimics rotary kiln conditions. A sensitivity analysis evaluates the impact of uncertainties in volatile nitrogen yields, precursor compositions (HCN/NH3), and char surface reactivity on NOX predictions. Results indicate that input uncertainties may account for up to 25% of the total predicted NOX. The ratio of nitrogen released as volatiles versus char-bound nitrogen and the initial char surface area of the coal particles are both critical parameters, while variations in volatile precursor ratios had a negligible effect (<1%). The model was validated against measured NOX emissions from the 150-kW facility, demonstrating that while the framework provides a robust estimation tool, high-fidelity characterization of char properties remains vital for precise emission modelling.
- Open Access
- 9 March 2026
- Published by Elsevier in SSRN Electronic Journal
Sensitivity of NOX Formation to Nitrogen Release and Char Surface Area: An Estimation Approach for CFD Modelling of Pulverized Coal Combustion
To effectively mitigate NOX emissions in pulverized coal combustion, Computational Fluid Dynamics (CFD) is frequently employed as a predictive tool. Because fuel-bound nitrogen is the primary source of NOX in these applications, modeling largely relies on coal characterization—data that are often uncertain even with costly experimental measurements.This study introduces a systematic framework for estimating missing fuel-nitrogen characteristics from standard proximate and ultimate analyses based on correlations from rapid coal devolatilization experiments. Utilizing a conventional CFD approach, we simulated coal combustion in a 150-kW facility, which mimics rotary kiln conditions. A sensitivity analysis evaluates the impact of uncertainties in volatile nitrogen yields, precursor compositions (HCN/NH3), and char surface reactivity on NOX predictions. Results indicate that input uncertainties may account for up to 25% of the total predicted NOX. The ratio of nitrogen released as volatiles versus char-bound nitrogen and the initial char surface area of the coal particles are both critical parameters, while variations in volatile precursor ratios had a negligible effect (<1%). The model was validated against measured NOX emissions from the 150-kW facility, demonstrating that while the framework provides a robust estimation tool, high-fidelity characterization of char properties remains vital for precise emission modeling.
- 9 March 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessSensitivity of NOX Formation to Nitrogen Release and Char Surface Area: An Estimation Approach for CFD Modelling of Pulverized Coal Combustion
To effectively mitigate NOX emissions in pulverized coal combustion, Computational Fluid Dynamics (CFD) is frequently employed as a predictive tool. Because fuel-bound nitrogen is the primary source of NOX in these applications, modeling largely relies on coal characterization—data that are often uncertain even with costly experimental measurements.This study introduces a systematic framework for estimating missing fuel-nitrogen characteristics from standard proximate and ultimate analyses based on correlations from rapid coal devolatilization experiments. Utilizing a conventional CFD approach, we simulated coal combustion in a 150-kW facility, which mimics rotary kiln conditions. A sensitivity analysis evaluates the impact of uncertainties in volatile nitrogen yields, precursor compositions (HCN/NH3), and char surface reactivity on NOX predictions. Results indicate that input uncertainties may account for up to 25% of the total predicted NOX. The ratio of nitrogen released as volatiles versus char-bound nitrogen and the initial char surface area of the coal particles are both critical parameters, while variations in volatile precursor ratios had a negligible effect (<1%). The model was validated against measured NOX emissions from the 150-kW facility, demonstrating that while the framework provides a robust estimation tool, high-fidelity characterization of char properties remains vital for precise emission modeling.
- Open Access
- 6 January 2026
- Published by Elsevier in Optics and Lasers in Engineering
- Vol. 200
Quantitative raman thermometry and N2+ detection in a non-transferred plasma torch
- 6 January 2026
- Published by Elsevier in Optics and Lasers in Engineering
- Vol. 200
Open AccessQuantitative raman thermometry and N2+ detection in a non-transferred plasma torch
- Open Access
- 28 July 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (15) , 8367
The Effect of Non-Transferred Plasma Torch Electrodes on Plasma Jet: A Computational Study
This study explores how different electrode shapes affect plasma flow in a non-transferred plasma torch. Various cathode geometries—including conical, tapered, flat, and cylindrical—were examined alongside stepped anode designs. A 2D axisymmetric computational model was employed to assess the impact of these shapes on plasma behavior. The results reveal that different cathode designs require varying current levels to maintain a consistent power output. This paper presents the changes in electric conductivity and electric potential for different input currents across the arc formation path (from the cathode tip to the anode beginning) and relating to Ohm’s law. Significant variations in plasma jet velocity and temperature were observed, especially near the cathode tip. The study concludes by evaluating thermal efficiency across geometry configurations. Flat cathodes demonstrated the highest efficiency, while the anode shape had minimal impact.
- 28 July 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (15) , 8367
Open AccessThe Effect of Non-Transferred Plasma Torch Electrodes on Plasma Jet: A Computational Study
This study explores how different electrode shapes affect plasma flow in a non-transferred plasma torch. Various cathode geometries—including conical, tapered, flat, and cylindrical—were examined alongside stepped anode designs. A 2D axisymmetric computational model was employed to assess the impact of these shapes on plasma behavior. The results reveal that different cathode designs require varying current levels to maintain a consistent power output. This paper presents the changes in electric conductivity and electric potential for different input currents across the arc formation path (from the cathode tip to the anode beginning) and relating to Ohm’s law. Significant variations in plasma jet velocity and temperature were observed, especially near the cathode tip. The study concludes by evaluating thermal efficiency across geometry configurations. Flat cathodes demonstrated the highest efficiency, while the anode shape had minimal impact.
- Open Access
- 27 March 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 120, 323-332
Configuring hydrogen lancing to reduce carbon and nitrogen oxides emissions from coal-fired rotary kilns
- 27 March 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 120, 323-332
Open AccessConfiguring hydrogen lancing to reduce carbon and nitrogen oxides emissions from coal-fired rotary kilns
- Open Access
Computational Analysis of Flow Separation in Non-Transferred Plasma Torch: Causes, Impacts and Control Methods
In a non-transferred plasma torch, the working gas becomes ionized and forms plasma as it interacts with the electric arc at the cathode tip. However, in certain cathode shapes, particularly flat ones, and under specific conditions, the gas flow can separate at the cathode tip, forming a vortex region. While this flow separation is influenced by geometric factors, it occurs in the critical zone where plasma is generated. Understanding the causes of this separation is essential, as it may significantly impact torch performance. If the separation proves detrimental, it is important to identify ways to mitigate it. This paper presents a computational analysis of a non-transferred plasma torch to investigate the physics behind flow separation. The results highlight the location and causes of the separation, as well as its potential advantages and disadvantages. Finally, the paper explores theoretical approaches to address flow separation in plasma torches, offering practical insights for enhancing their design and efficiency.
Open AccessComputational Analysis of Flow Separation in Non-Transferred Plasma Torch: Causes, Impacts and Control Methods
In a non-transferred plasma torch, the working gas becomes ionized and forms plasma as it interacts with the electric arc at the cathode tip. However, in certain cathode shapes, particularly flat ones, and under specific conditions, the gas flow can separate at the cathode tip, forming a vortex region. While this flow separation is influenced by geometric factors, it occurs in the critical zone where plasma is generated. Understanding the causes of this separation is essential, as it may significantly impact torch performance. If the separation proves detrimental, it is important to identify ways to mitigate it. This paper presents a computational analysis of a non-transferred plasma torch to investigate the physics behind flow separation. The results highlight the location and causes of the separation, as well as its potential advantages and disadvantages. Finally, the paper explores theoretical approaches to address flow separation in plasma torches, offering practical insights for enhancing their design and efficiency.
- Open Access
Oxy-fuel combustion of softwood in a pilot-scale down-fired pulverized combustor – Fate of potassium