Andrii Kapustianskyi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Andrii Kapustianskyi has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Kateryna Romanova
National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute
5 shared publications - Oksana Yurasova
Lviv Polytechnic National University
4 shared publications - Igor Galyanchuk
Lviv Polytechnic National University
3 shared publications - Bohdan Romanov1 shared publication
- Liubov Kolyasa
Lviv Polytechnic National University
1 shared publication - Mykhailo Stepaniak
Lviv Polytechnic National University
1 shared publication
Latest Publications
- Open Access
- 25 September 2026
- Published by Instytut Gospodarki Surowcami Mineralnymi i Energia Polskiej Akademii Nauk in Polityka Energetyczna – Energy Policy Journal
- Vol. 29 (3) , 29-58
Prospects for restoration of Ukrainian energy sector infrastructure in the wake of Russian full-scale invasion
The study aimed to substantiate engineering approaches to restoring the infrastructure of the energy sector of Ukraine, which suffered large-scale destruction as a result of the full-scale armed invasion of the Russian Federation. The research methodology included modeling emergency and...
- 25 September 2026
- Published by Instytut Gospodarki Surowcami Mineralnymi i Energia Polskiej Akademii Nauk in Polityka Energetyczna – Energy Policy Journal
- Vol. 29 (3) , 29-58
Open AccessProspects for restoration of Ukrainian energy sector infrastructure in the wake of Russian full-scale invasion
The study aimed to substantiate engineering approaches to restoring the infrastructure of the energy sector of Ukraine, which suffered large-scale destruction as a result of the full-scale armed invasion of the Russian Federation. The research methodology included modeling emergency and...
- 30 May 2026
- Published by Admiral Makarov National University of Shipbuilding
- No. 2 (505),p. 137-146
STUDY OF ENERGY AND HYDRODYNAMIC PERFORMANCE OF A JET-VORTEX PUMP
- 30 May 2026
- Published by Admiral Makarov National University of Shipbuilding
- No. 2 (505),p. 137-146
STUDY OF ENERGY AND HYDRODYNAMIC PERFORMANCE OF A JET-VORTEX PUMP
- Open Access
- 30 April 2026
- Published by Ukrainian National Forestry University in Scientific Bulletin of UNFU
- Vol. 36 (2) , 159–167
Системно-інформаційний підхід до створення цифрових двійників теплових електростанцій задля підвищення ефективності та надійності енергогенерування
Наразі актуальною проблемою є підвищення ефективності функціонування сучасних енергетичних систем, що зумовлено необхідністю зниження споживання первинних енергоресурсів, підвищення надійності енергогенерування та мінімізації екологічного навантаження. Встановлено доцільність застосування системного підходу до модернізації теплових електростанцій на основі інтеграції технології цифрових двійників із процесами оновлення генеруючого обладнання та оптимізації режимів його експлуатації. З'ясовано особливості функціонування теплових електростанцій у конденсаційному та когенераційному режимах навантаження із використанням методів системного та порівняльного аналізу, а також цифрового моделювання енергетичних процесів. Охарактеризовано відмінності формування енергетичного та теплового балансів зазначених режимів генерування, що визначають ефективність використання паливно-енергетичних ресурсів. Встановлено, що конденсаційні електростанції орієнтовані на максимізацію виробництва електричної енергії шляхом підвищення ефективності турбоустановок й оптимізації теплового режиму конденсаційних систем, тоді як когенераційні станції забезпечують одночасне виробництво електричної та теплової енергії з урахуванням збалансованого використання різних видів палива. Оцінено вплив конструктивних й експлуатаційних параметрів конденсаторів на показники роботи енергоблоків, зокрема – встановлено залежність їх характеристик від температури охолоджувальної води на вході та кількості теплообмінних трубок. З'ясовано можливості підвищення енергоефективності енергогенеруючих комплексів шляхом інтеграції додаткових генеруючих потужностей, зокрема – газопоршневих і газотурбінних установок, а також малих модульних ядерних реакторів. Встановлено, що застосування газопоршневих установок дає змогу досягати економії первинної енергії до 30-40 %, тоді як використання газотурбінних установок забезпечує високі показники ефективності за роботи на повному навантаженні. Оцінено потенціал використання технології цифрових двійників для прогнозування режимів роботи енергетичного обладнання, оптимізації енергетичних потоків і підвищення надійності функціонування теплових електростанцій.
- 30 April 2026
- Published by Ukrainian National Forestry University in Scientific Bulletin of UNFU
- Vol. 36 (2) , 159–167
Open AccessСистемно-інформаційний підхід до створення цифрових двійників теплових електростанцій задля підвищення ефективності та надійності енергогенерування
Наразі актуальною проблемою є підвищення ефективності функціонування сучасних енергетичних систем, що зумовлено необхідністю зниження споживання первинних енергоресурсів, підвищення надійності енергогенерування та мінімізації екологічного навантаження. Встановлено доцільність застосування системного підходу до модернізації теплових електростанцій на основі інтеграції технології цифрових двійників із процесами оновлення генеруючого обладнання та оптимізації режимів його експлуатації. З'ясовано особливості функціонування теплових електростанцій у конденсаційному та когенераційному режимах навантаження із використанням методів системного та порівняльного аналізу, а також цифрового моделювання енергетичних процесів. Охарактеризовано відмінності формування енергетичного та теплового балансів зазначених режимів генерування, що визначають ефективність використання паливно-енергетичних ресурсів. Встановлено, що конденсаційні електростанції орієнтовані на максимізацію виробництва електричної енергії шляхом підвищення ефективності турбоустановок й оптимізації теплового режиму конденсаційних систем, тоді як когенераційні станції забезпечують одночасне виробництво електричної та теплової енергії з урахуванням збалансованого використання різних видів палива. Оцінено вплив конструктивних й експлуатаційних параметрів конденсаторів на показники роботи енергоблоків, зокрема – встановлено залежність їх характеристик від температури охолоджувальної води на вході та кількості теплообмінних трубок. З'ясовано можливості підвищення енергоефективності енергогенеруючих комплексів шляхом інтеграції додаткових генеруючих потужностей, зокрема – газопоршневих і газотурбінних установок, а також малих модульних ядерних реакторів. Встановлено, що застосування газопоршневих установок дає змогу досягати економії первинної енергії до 30-40 %, тоді як використання газотурбінних установок забезпечує високі показники ефективності за роботи на повному навантаженні. Оцінено потенціал використання технології цифрових двійників для прогнозування режимів роботи енергетичного обладнання, оптимізації енергетичних потоків і підвищення надійності функціонування теплових електростанцій.
- Open Access
- 30 April 2026
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 2 (5 (140)) , 36-43
Construction of mathematical models of heat exchange in electronic devices with semi-through foreign elements
This study investigates heat exchange processes in isotropic spatial environments with foreign semi-through elements subjected to external and internal thermal loads. Significant temperature gradients arise as a result of the thermal load. To establish and analyze temperature regimes for effective operation of electronic devices, mathematical models for determining temperature fields have been constructed. Based on the formulated boundary value problems of thermal conductivity, their analytical and numerical solutions have been defined. Using these solutions, numerical calculations of the temperature distribution in spatial coordinates for given geometric and thermophysical parameters have been performed. For an effective description of the thermal conductivity coefficient for inhomogeneous spatial media, asymmetric unit functions were used. A technique for segment-constant approximation of temperature as a function of spatial coordinates on the surfaces of foreign elements has been introduced. As a result, second-order differential equations with partial derivatives and discontinuous and singular coefficients have been derived. The numerical results reflect temperature distribution in the media in spatial coordinates for the given geometric and thermophysical parameters. The number of partitions of the intervals (0; h), (–H; H), (0; R) was chosen to be equal to 9. That has made it possible to obtain numerical values of temperature with an accuracy of 10–6. The constructed mathematical models of heat transfer make it possible to analyze spatial isotropic media with foreign through-going elements in terms of their thermal stability
- 30 April 2026
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 2 (5 (140)) , 36-43
Open AccessConstruction of mathematical models of heat exchange in electronic devices with semi-through foreign elements
This study investigates heat exchange processes in isotropic spatial environments with foreign semi-through elements subjected to external and internal thermal loads. Significant temperature gradients arise as a result of the thermal load. To establish and analyze temperature regimes for effective operation of electronic devices, mathematical models for determining temperature fields have been constructed. Based on the formulated boundary value problems of thermal conductivity, their analytical and numerical solutions have been defined. Using these solutions, numerical calculations of the temperature distribution in spatial coordinates for given geometric and thermophysical parameters have been performed. For an effective description of the thermal conductivity coefficient for inhomogeneous spatial media, asymmetric unit functions were used. A technique for segment-constant approximation of temperature as a function of spatial coordinates on the surfaces of foreign elements has been introduced. As a result, second-order differential equations with partial derivatives and discontinuous and singular coefficients have been derived. The numerical results reflect temperature distribution in the media in spatial coordinates for the given geometric and thermophysical parameters. The number of partitions of the intervals (0; h), (–H; H), (0; R) was chosen to be equal to 9. That has made it possible to obtain numerical values of temperature with an accuracy of 10–6. The constructed mathematical models of heat transfer make it possible to analyze spatial isotropic media with foreign through-going elements in terms of their thermal stability
- Open Access
- 27 February 2026
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 1 (8 (139)) , 67-78
Revealing the influence of age and fractional composition of woody biomass on the kinetic characteristics of thermal decomposition
This study investigates processes related to thermal decomposition and direct combustion of woody biomass derived from the fast-growing energy willow Salix fragilis. The task addressed is predetermined by the lack of a sufficient database on kinetic parameters required for the efficient utilization of woody biofuel in modern boiler systems, particularly under conditions of transitioning from fossil to renewable energy sources. The thermal degradation pattern of woody biomass of different ages and particle-size distributions was explored in detail using differential thermogravimetry (DTG) and differential thermal analysis (DTA). The results demonstrate empirical dependences of relative mass loss of samples at heating, which made it possible to identify the characteristic stages of thermal decomposition and the intensity of mass transfer. The clearly observed influence of biomass age and particle-size distribution enabled identification of the key kinetic features that directly affect the combustion rate and completeness of fuel conversion. These differences provide a more accurate prediction of fuel behavior in actual power units and lay the basis for forming the primary database of combustion kinetic constants. The results are attributed to differences in the structural organization of the wood, the biomass age, as well as the content of volatile components in samples of different age groups. The practical application of the established dependences is relevant for the design and optimization of boilers operating on comminuted woody biomass. The defined parameters make it possible to optimize fuel particle-size composition, ensure a rational residence time of biomass particles in the combustion zone, and improve the energy efficiency of boiler units when replacing traditional fuels with renewable raw materials.
- 27 February 2026
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 1 (8 (139)) , 67-78
Open AccessRevealing the influence of age and fractional composition of woody biomass on the kinetic characteristics of thermal decomposition
This study investigates processes related to thermal decomposition and direct combustion of woody biomass derived from the fast-growing energy willow Salix fragilis. The task addressed is predetermined by the lack of a sufficient database on kinetic parameters required for the efficient utilization of woody biofuel in modern boiler systems, particularly under conditions of transitioning from fossil to renewable energy sources. The thermal degradation pattern of woody biomass of different ages and particle-size distributions was explored in detail using differential thermogravimetry (DTG) and differential thermal analysis (DTA). The results demonstrate empirical dependences of relative mass loss of samples at heating, which made it possible to identify the characteristic stages of thermal decomposition and the intensity of mass transfer. The clearly observed influence of biomass age and particle-size distribution enabled identification of the key kinetic features that directly affect the combustion rate and completeness of fuel conversion. These differences provide a more accurate prediction of fuel behavior in actual power units and lay the basis for forming the primary database of combustion kinetic constants. The results are attributed to differences in the structural organization of the wood, the biomass age, as well as the content of volatile components in samples of different age groups. The practical application of the established dependences is relevant for the design and optimization of boilers operating on comminuted woody biomass. The defined parameters make it possible to optimize fuel particle-size composition, ensure a rational residence time of biomass particles in the combustion zone, and improve the energy efficiency of boiler units when replacing traditional fuels with renewable raw materials.
- Open Access
- 3 April 2025
- Published by The Grassroots Institute in Grassroots Journal of Natural Resources
- Vol. 8 (1) , 801-827
Technological and Engineering Aspects of the Development of Biogas and Biomethane Plants in Ukraine: Prospects for Integration into the Country’s Energy System
The study is aimed at identifying key technical solutions and opportunities for using biogas and biomethane to improve the efficiency and stability of the Ukrainian energy system. This study analysed the raw material sources for biogas production, fermentation processes and integration of biogas plants into the power grid. The study found that the use of biogas and biomethane plants contributes to the energy independence of Ukraine. The main sources of raw materials were identified, including agricultural waste, organic residues from the food industry and energy crops. The analysis showed that biogas plants can stably produce fuel for energy generation, which makes it possible to balance fluctuations in the operation of renewable energy sources, in particular solar and wind power plants. The article proves the effectiveness of the introduction of cogeneration plants that provide not only electricity but also heat for industrial or municipal needs. It is also found that modern biogas purification technologies, such as membrane separation and absorption, allow the production of biomethane, which corresponds to natural gas in terms of its characteristics. An assessment of the prospects for integrating biomethane into the Ukrainian gas transmission system has shown the possibility of using this fuel as an environmentally friendly analogue of fossil gas. The results of the study emphasise the importance of government support and infrastructure development to enhance the implementation of biogas technologies. It has been established that the combination of biogas plants with energy storage systems can increase the stability of electricity supply to the grid, which is especially important for regions with uneven energy consumption. In addition, it has been confirmed that the creation of local energy clusters based on biogas plants helps to reduce dependence on imported energy resources and develop rural areas.
- 3 April 2025
- Published by The Grassroots Institute in Grassroots Journal of Natural Resources
- Vol. 8 (1) , 801-827
Open AccessTechnological and Engineering Aspects of the Development of Biogas and Biomethane Plants in Ukraine: Prospects for Integration into the Country’s Energy System
The study is aimed at identifying key technical solutions and opportunities for using biogas and biomethane to improve the efficiency and stability of the Ukrainian energy system. This study analysed the raw material sources for biogas production, fermentation processes and integration of biogas plants into the power grid. The study found that the use of biogas and biomethane plants contributes to the energy independence of Ukraine. The main sources of raw materials were identified, including agricultural waste, organic residues from the food industry and energy crops. The analysis showed that biogas plants can stably produce fuel for energy generation, which makes it possible to balance fluctuations in the operation of renewable energy sources, in particular solar and wind power plants. The article proves the effectiveness of the introduction of cogeneration plants that provide not only electricity but also heat for industrial or municipal needs. It is also found that modern biogas purification technologies, such as membrane separation and absorption, allow the production of biomethane, which corresponds to natural gas in terms of its characteristics. An assessment of the prospects for integrating biomethane into the Ukrainian gas transmission system has shown the possibility of using this fuel as an environmentally friendly analogue of fossil gas. The results of the study emphasise the importance of government support and infrastructure development to enhance the implementation of biogas technologies. It has been established that the combination of biogas plants with energy storage systems can increase the stability of electricity supply to the grid, which is especially important for regions with uneven energy consumption. In addition, it has been confirmed that the creation of local energy clusters based on biogas plants helps to reduce dependence on imported energy resources and develop rural areas.
- 1 January 2017
- Published by Ob'edinennaya Redakcya OOO in Теплоэнергетика
- No. 7,p. 83-90
Исследование факельного сжигания непроектных бинарных угольных смесей в паровых котлах
Исследованы изменения в структуре топливопотребления тепловыми электростанциями Украины вследствие прекращения поставок донецкого антрацита и определены основные задачи для сохранения функциональности угольной отрасли. Проанализирована возможность использования в краткосрочной перспективе непроектного твердого топлива путем его факельного сжигания в энергетических котлах ТЭС и ТЭЦ. Представлены результаты экспертных испытаний котлов ТПП-210А и ТП-15 при факельном сжигании смесей антрацита, тощего угля и угля Южно-Африканской Республики (ЮАР) в различных сочетаниях. Горение таких смесей характеризуется более высокими значениями выхода летучих веществ и температуры плавкости золы. Рассмотрен вопрос о наличии синергетического эффекта в процессе факельного сжигания бинарных смесей углей с разной степенью метаморфизма. Разработан ряд первоочередных мер, позволяющих перевести котлы, рассчитанные на сжигание антрацита, на использование смесей угля разных марок. Выполнен позонный тепловой расчет топки котла ТП-15 в целях численного исследования распределения температур по зонам топочной камеры и определения возможности и условий реализации температурного режима жидкого шлакоудаления. Положительный результат достигнут при сжигании антрацитового штыба (АШ), угля ЮАР и их смесей с тощим углем во всем диапазоне рабочих нагрузок исследуемых котлов. Также успешно удалось решить задачи нормализации вытекания жидкого шлака без затягивания леток. Полученные в ходе проведения балансовых опытов результаты дают возможность утверждать, что характеристики горения факела (температурный режим в топке, значение подсветки, степень выгорания) бинарной смеси подобны характеристикам факела угля с большей реакционной способностью, что свидетельствует о наличии синергетического эффекта в процессах совместного сжигания углей различных...
- 1 January 2017
- Published by Ob'edinennaya Redakcya OOO in Теплоэнергетика
- No. 7,p. 83-90
Исследование факельного сжигания непроектных бинарных угольных смесей в паровых котлах
Исследованы изменения в структуре топливопотребления тепловыми электростанциями Украины вследствие прекращения поставок донецкого антрацита и определены основные задачи для сохранения функциональности угольной отрасли. Проанализирована возможность использования в краткосрочной перспективе непроектного твердого топлива путем его факельного сжигания в энергетических котлах ТЭС и ТЭЦ. Представлены результаты экспертных испытаний котлов ТПП-210А и ТП-15 при факельном сжигании смесей антрацита, тощего угля и угля Южно-Африканской Республики (ЮАР) в различных сочетаниях. Горение таких смесей характеризуется более высокими значениями выхода летучих веществ и температуры плавкости золы. Рассмотрен вопрос о наличии синергетического эффекта в процессе факельного сжигания бинарных смесей углей с разной степенью метаморфизма. Разработан ряд первоочередных мер, позволяющих перевести котлы, рассчитанные на сжигание антрацита, на использование смесей угля разных марок. Выполнен позонный тепловой расчет топки котла ТП-15 в целях численного исследования распределения температур по зонам топочной камеры и определения возможности и условий реализации температурного режима жидкого шлакоудаления. Положительный результат достигнут при сжигании антрацитового штыба (АШ), угля ЮАР и их смесей с тощим углем во всем диапазоне рабочих нагрузок исследуемых котлов. Также успешно удалось решить задачи нормализации вытекания жидкого шлака без затягивания леток. Полученные в ходе проведения балансовых опытов результаты дают возможность утверждать, что характеристики горения факела (температурный режим в топке, значение подсветки, степень выгорания) бинарной смеси подобны характеристикам факела угля с большей реакционной способностью, что свидетельствует о наличии синергетического эффекта в процессах совместного сжигания углей различных...