WSWolfgang Schnick

Wolfgang Schnick

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Wolfgang Schnick has a total of 614 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Mixed Ionic-Electronic Conductivity in K3W2N5 and the Nonconductive K2WN2O

    by Thanh G. Chau, Stefan S. Rudel, Lucas G. Balzat, M. Satukbugra Istek, Kristian Witthaut, Bettina V. Lotsch, Wolfgang Schnick

    We report on the synthesis of the novel alkali tungsten nitride K3W2N5 and the alkali tungsten oxonitride K2WN2O. Both compounds were synthesized in bulk using the ammonothermal method at 873 K with autogenous pressures between 100 and 175 MPa. The compounds feature zweier chains, ∞1[WNON2/2]2– in K2WN2O and zweier double chains, ∞1[W2N2N6/2]3– in K3W2N5. Temperature-dependent PXRD data revealed an anisotropic thermal expansion along the direction of the anionic chains in both compounds. The compounds are semiconductors with band gaps between 2.14 and 2.24 eV determined by UV/Vis measurements and supported by DFT calculations. Electrochemical impedance spectroscopy measurements revealed K2WN2O to be an insulator and mixed ionic-electronic conductivity in K3W2N5, which makes K3W2N5 the first tungsten nitride-based ionic conductor.

  • Open Access

    Advantages of Asymmetry: A Synthetic and Structural Exploration of s ‐Triazine Chemistry Starting From Pyrrolated Ammeline and Melam

    by Thaddäus J. Koller, Alexander Pichler, Johannes N. Singer, Zehua Xu, Vasiliki Valsamidou, Reinhard M. Pritzl, Wolfgang Schnick

    Melam and ammeline are simple, s ‐triazine‐based compounds first described by Liebig nearly 200 years ago. Outgoing from these two compounds, synthetic strategies for asymmetrically substituted s ‐triazines were developed. As the initial key step, Clauson–Kaas pyrrolation of the compounds’ primary amino groups was carried out, significantly improving their solubility in organic solvents and thereby facilitating further conversions. These include functionalization of the s ‐triazine bridging amino group of pyrrolated melam by reaction with electrophiles, while pyrrolated ammeline was deoxychlorinated and subsequently reacted with nucleophiles to displace the resulting Cl substituent. Moreover, a reaction protocol for reversion of pyrrolyl into amino groups was developed, which involved ozonolysis, followed by treatment with aqueous NaOCl of the resulting formamide derivatives. Thereby, melam derivatives with essentially the same coordination site but enhanced solubilities were obtained. This enabled the preparation of a Cu(II) coordination complex from aqueous solution, which is unheard of for melam itself. Finally, the thus accessible s ‐triazines were structurally characterized to gain deeper insights on how the different conducted transformations influence the physicochemical properties relevant for future applications.

  • Open Access

    Synthesis and crystal structure of γ -SrNCN at 38 GPa

    by Lukas Brüning, Georg Krach, Pascal Lennert Jurzick, Wolfgang Schnick, Maxim Bykov

    γ -Strontium carbodiimide, γ-SrNCN, was synthesized from a mixture of strontium subnitride (Sr 2 N) and tetracyanoethylene (C 6 N 4 ) at 38 (3) GPa in a laser-heated diamond anvil cell. Its crystal structure was solved and refined using synchrotron single-crystal X-ray diffraction. The new polymorph crystallizes in space group I 4/ mcm (No. 140), where the Sr 2+ and NCN 2− packing can be derived from the CsCl (B2) structure type. γ -SrNCN ( tI 16-SrNCN) is isostructural to tI 16-BaNCN and represents the first high-pressure polymorph of SrNCN.

  • Open Access

    More π, less Gap: Band Gap Tuning in Hybrid Antimony Halide Charge Transfer Semiconductors

    by Jakob Blahusch, Mirjam Zipkat, Wolfgang Schnick, Bettina V. Lotsch

    Organic cations can directly contribute to the electronic structure in hybrid organic–inorganic (HOI) materials, resulting in the formation of charge transfer semiconductors. Systematic tuning of the band gap by varying the organic cation in HOI charge transfer semiconductors remains underexplored. Here, we report the synthesis and characterization of (phenH 2 )SbCl 5 (phenH 2 = 1,10‐phenanthrolinium) and investigate how the extended π‐system influences optical properties compared to the previously reported (2,2‐bpyH 2 )SbCl 5 (2,2‐bpyH 2 = 2,2′‐bipyridinium). Both compounds feature tetrameric [Sb 4 Cl 20 ] 8‐ units and exhibit charge–transfer band gaps. Diffuse‐reflectance spectroscopy shows a red‐shifted absorption onset for (phenH 2 )SbCl 5 relative to (2,2‐bpyH 2 )SbCl 5 . The band gap decreases from 2.6 eV in (2,2‐bpyH 2 )SbCl 5 to 2.1 eV in (phenH 2 )SbCl 5 , a reduction of >0.4 eV. Density‐functional theory (DFT) calculations indicate that this red‐shift arises from increased contribution of the phenanthroline π*‐orbitals to the conduction band. This demonstrates that systematic variation of the organic cation's π‐conjugation can provide a strategy for band gap tuning in charge–transfer HOI antimony halides.

  • Open Access

    Band Gap Tuneability in Antiperovskite‐Based Nitrides AE 3 Pn N and Imides AE 5 Pn 2 (NH) 2 ( AE = Ca, Sr; Pn = As, Sb, Bi)

    by Thanh G Chau, Florian Wolf, Dan Han, Teak D Boyko, Stefan S Rudel, Thomas Bein, Hubert Ebert, Alexander Moewes, Wolfgang Schnick

    Inorganic antiperovskites with the formula X 3 A N ( X = Ba, Sr, Ca, Mg; A = As, Sb) have recently been reported to exhibit excellent optoelectronic properties including small carrier effective masses, suitable direct bandgaps, high optical absorption coefficients as well as allowed optical transitions at the band edges. Using the ammonothermal method, we have synthesized the imide antiperovskites AE 5 Pn 2 (NH) 2 ( AE = Ca, Sr; Pn = As, Sb, Bi). The crystal structures of AE 5 Pn 2 (NH) 2 were solved and refined in the orthorhombic space group Pbam by single‐crystal x‐ray diffraction (scXRD), and further confirmed using powder X‐ray diffraction (pXRD) and Raman spectroscopy. Depending on the ion size ratio between AE 2+ and Pn 3– , different degrees of octahedral tilting can be observed. Soft X‐ray spectroscopy was used to study the band gap and electronic structure, and revealed the presence of oxygen impurities. The AE 5 Pn 2 (NH) 2 compounds can further react to form the ternary antiperovskites AE 3 Pn N. Density functional theory calculations reveal favorable transport and optical properties. Narrow direct band gaps in the range of 0.87–1.76 eV could be verified experimentally, making AE 5 Pn 2 (NH) 2 not only suitable as precursor materials for the corresponding AE 3 Pn N antiperovskites, but also as promising candidates for solar cell absorber materials.


  • Synthesis, Magnetic Properties, and Luminescence-Assisted Structure Verification of Transition Metal and Rare-Earth Imidonitridophosphates

    by Mirjam Zipkat, Reinhard M. Pritzl, Dominik Werhahn, Aylin Koldemir, Kristian Witthaut, Felix Drötboom, Monika M. Pointner, Lydia Glas, Amalina T. Pritzl, Theresa Block, et al.

    This study reports the synthesis of two rare-earth imidonitridophosphates and a series of 3d transition metal imidonitridophosphates (MIIIH3P6N12 with M = V, Cr, Eu, Lu, and MIIH4P6N12 with M = Mn, Fe, Co, Ni) by high-pressure metathesis. The crystal structures were elucidated by a combination of single-crystal and powder X-ray diffraction, elemental analysis, and vibrational spectroscopy. All compounds crystallize in the orthorhombic crystal system (transition metal imidonitridophosphates: Cmce, EuH3P6N12: Pna21, LuH3P6N12: Pbam) and feature a layered anionic network composed of vertex-sharing [PN4] tetrahedra. Magnetic measurements indicated that Mn, Fe, Co, and Ni are in the oxidation state + II, while V, Cr, Eu, and Lu are in the oxidation state + III. Furthermore, the measurements revealed paramagnetic behavior for all compounds except LuH3P6N12 and indications of antiferromagnetic ordering at low temperatures for NiH4P6N12 and CrH3P6N12. The oxidation states of Fe and Eu were further confirmed by Mössbauer spectroscopic measurements. As LuH3P6N12 does not exhibit paramagnetic behavior, additional NMR spectroscopic measurements were conducted. Furthermore, luminescence measurements provided information that supported the structural characterization and gave insights into the ligand field strength of the coordination sphere of the metal atoms in the considered imidonitridophosphates, indicating that the [PN4] units show weakened coordination behavior.

  • Open Access

    Resolving a Nearly Two‐Centuries‐Old Mystery: On the Structural Chemistry and Physicochemical Properties of Compounds Associated With the Term Ammelide

    by Thaddäus J. Koller, Kristian Witthaut, Reinhard M. Pritzl, Simon M. J. Endraß, Markus Rösch, Georg Krach, Nadine Lammer, Thomas M. Klapötke, Wolfgang Schnick

    Ammelide, also known as melanuric acid, is a simple molecular compound, which can be regarded as the double hydrolysis product of the industrially relevant compound melamine. Within this work, the first structural description of ammelide was provided almost 200 years after its discovery. This not only gave the first unambiguous evidence that ammelide's preferred tautomeric form in the solid is 6‐amino‐1,3,5‐triazine‐2,4(1 H ,3 H )‐dione, but also showed that ammelide adopts a layered structure similar to the closely related ammeline. Moreover, the crystal structures of three modifications of the 1:1 adduct between ammeline and ammelide were elucidated, which form layers with a honeycomb motif and hexagonal voids analogous to melamine cyanurate. Differential thermal analysis and thermogravimetric analysis demonstrated that both pure ammelide and its adduct with ammeline have exceptionally high thermal stabilities, resulting from their dense hydrogen bonding networks. Finally, the synthesis and structural characterization of the ammelide's nitrate and perchlorate salts were carried out to examine the potential of ammelide as part of insensitive high‐energy‐density materials through sensitivity measurements and theoretical calculations.


  • Highly condensed Eu2+-doped nitrodoberyllosilicates, MBeSi2N4:Eu2+ (M = Ca, Sr): electronic structure and band gap studies

    by Muhammad Ruhul Amin, Teak D. Boyko, Philipp Strobel, Wolfgang Schnick, Alexander Moewes

    Phosphor-converted light-emitting diodes (pc-LEDs) are a key technology in the reduction of global energy consumption. The understanding of the chemical and electronic properties of eligible substance classes is essential for applications of pc-LEDs. Here, the electronic structure, band gap, and band structure of highly condensed Eu2+-doped nitrodoberyllosilicates, MBeSi2N4:Eu2+ ( M = Ca, Sr) are studied using synchrotron-based soft X-ray absorption spectroscopy (XAS) and emission spectroscopy (XES) as well as density functional theory (DFT). The electronic band gaps for MBeSi2N4:Eu2+ are determined to be 4.20 ± 0.25 eV for M = Ca and 4.30 ± 0.25 eV for M = Sr using the combination of XAS and XES measurements. The measured band gap is in excellent agreement with our calculations (4.60 eV for M = Ca and 4.80 eV for M = Sr) using the Perdew–Burke–Ernzerhof variant of the generalized gradient functional, including a semilocal potential modified from that of Becke and Johnson. Based on the DFT calculations and the measurements, it is found that both compounds exhibit direct band gap transitions. The calculated partial density of states reveal that the N p-states dominate in the valence band for both materials, and the Ca d-states and Sr d-states dominate in the conduction band of CaBeSi2N4 and SrBeSi2N4, respectively. The observed electronic band gap is large enough, which will not interfere with the luminescent transition of 5 d → 4 f of Eu2+ emission. Thus, these two materials are promising candidates as host materials in pc-LEDs applications.

  • Open Access

    Unique Mixed Valence Behavior of Tantalum and Electronic Structure of the Novel P 1−x Ta 8+x N 13 (X = 0.1–0.15) Using Density Functional Theory and Soft X‐Ray Spectroscopy

    by Claude Ceniza, Monika M. Pointner, Teak D. Boyko, Wolfgang Schnick, Alexander Moewes

    In this study, the electronic structure and bonding characteristics of PTaN ( x = 0.1–0.15), a compound featuring a high coordination of phosphorus with six nitrogen atoms, are explored. Soft X‐ray spectroscopy and density functional theory calculations are employed to investigate the material's electronic properties. The analysis reveals that the material exhibits metallic behavior, which can be attributed to the 5 d electronic states of tantalum. It is observed that tantalum exists in mixed valence states, forming two distinct types of TaN bonds: one predominantly covalent and the other with a combination of ionic and covalent characteristics. Both bond types contribute to the metallic properties observed. Additionally, it is found that the valence electrons of tantalum are not fully integrated into the TaN bonds, as supported by electron localization function (ELF) calculations, which show electron localization in narrow channels consisting of three Ta atoms. To the best of our knowledge, we have measured the phosphorus L β 3, β 4 XES and L 1 ‐edge XAS for the first time. These findings enhance one's understanding of the complex electronic structure of PTaN and provide insights into the material's potential applications in electronic devices and electrocatalysis.

  • Open Access

    Long Used but Hardly Known: Synthesis and Crystal Structure of Tritium Breeding Li2Be2O3

    by Georg Krach, Jennifer Steinadler, Robert Calaminus, Bettina V. Lotsch, Wolfgang Schnick

    A main challenge for the operation of a nuclear fusion reactor is the consumption of tritium during the fusion process and the limited availability of tritium in natural resources or its production in nuclear power plants. The most promising approach is breeding of new tritium within the operating fusion reactor. For this purpose, suitable breeding materials are needed. Lithium beryllium oxides are a promising class of compounds, as they unite both target and neutron multiplier in one material. While there have already been studies on sintered ceramics in the Li2O·BeO system, the crystal structure of compounds of a defined composition has so far remained unsolved. Herein, we report on the synthesis of phase‐pure Li2Be2O3 in a high‐temperature (HT) approach and its structure determination by single‐crystal X‐ray diffraction (sc‐XRD). In addition, the compound was characterized by powder X‐ray diffraction (PXRD), solid‐state nuclear magnetic resonance (NMR) spectroscopy, and elemental analysis. The thermal stability, which is important for use as blanket material in a fusion reactor, was examined with differential scanning calorimetry (DSC).