Kaimin Fan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Kaimin Fan has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
Jing Tang
School of Ecology and Environmental Science, Qinghai Institute of Technology, Xining 810016, China
7 shared publicationsJiangfeng Ni
School of Science, Jiangsu Ocean University, Lianyungang, China
2 shared publications- Jing Tang
School of Ecology and Environmental Science, Qinghai Institute of Technology, Xining, China
2 shared publications Kun Wang
Xingzhi College, Zhejiang Normal University, Jinhua 321004, China
2 shared publicationsShiyun Wu
School of Chemistry and Chemical Engineering, Sichuan University of Arts and Science, Dazhou 635000, P. R. China
2 shared publicationsBoyu Liu
Qinghai Provincial Key Laboratory of New Light Alloys, Qinghai Provincial Engineering Research Center of High-Performance Light Metal Alloys and Forming, Qinghai University, Xining 810016, PR China
1 shared publication
Latest Publications
- 9 February 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (17) , 10452-10467
Phase interface engineering of defect-rich 1T/2H-WX 2 /RGO (X = S, Se) nanosheets for efficient microwave absorption and supercapacitor applications
Phase interface engineering plays an essential role in the design and development of effective electromagnetic wave (EMW) absorption materials and energy storage devices. Nevertheless, the development of multifunctional materials that can simultaneously tackle these challenges remains a significant difficulty. In this study, we developed multifunctional defect-rich 1T/2H-WX2/RGO (X = S, Se) nanosheets utilizing a simple solvothermal and freeze-drying technique. The synthesized 1T/2H-WX2/RGO nanosheets exhibited superior EMW absorption and electrochemical characteristics. The effective absorption bandwidth (EAB) reached 7.68 GHz at a thickness of 3.10 mm. This excellent performance can be attributed to various loss mechanisms, including conductive loss, defect-induced dipole polarization loss and interface polarization loss. Moreover, the 1T/2H-WS2/RGO-15 nanosheets attained a high specific capacitance of 390.44 F g−1 at a current density of 1 A g−1. In contrast, the 1T/2H-WSe2/RGO-4 nanosheets demonstrated impressive cycling stability of 71.81% after 5000 cycles, which can be attributed to the active sites provided by its rich heterogeneous interface. The energy density of the 1T/2H-WS2/RGO-15 nanosheets was measured to be 4.27 Wh kg−1 at a power density of 400 W kg−1. This research offers valuable insights into the development of multifunctional materials that can serve as EMW absorbers and supercapacitor electrodes.
- 9 February 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (17) , 10452-10467
Phase interface engineering of defect-rich 1T/2H-WX 2 /RGO (X = S, Se) nanosheets for efficient microwave absorption and supercapacitor applications
Phase interface engineering plays an essential role in the design and development of effective electromagnetic wave (EMW) absorption materials and energy storage devices. Nevertheless, the development of multifunctional materials that can simultaneously tackle these challenges remains a significant difficulty. In this study, we developed multifunctional defect-rich 1T/2H-WX2/RGO (X = S, Se) nanosheets utilizing a simple solvothermal and freeze-drying technique. The synthesized 1T/2H-WX2/RGO nanosheets exhibited superior EMW absorption and electrochemical characteristics. The effective absorption bandwidth (EAB) reached 7.68 GHz at a thickness of 3.10 mm. This excellent performance can be attributed to various loss mechanisms, including conductive loss, defect-induced dipole polarization loss and interface polarization loss. Moreover, the 1T/2H-WS2/RGO-15 nanosheets attained a high specific capacitance of 390.44 F g−1 at a current density of 1 A g−1. In contrast, the 1T/2H-WSe2/RGO-4 nanosheets demonstrated impressive cycling stability of 71.81% after 5000 cycles, which can be attributed to the active sites provided by its rich heterogeneous interface. The energy density of the 1T/2H-WS2/RGO-15 nanosheets was measured to be 4.27 Wh kg−1 at a power density of 400 W kg−1. This research offers valuable insights into the development of multifunctional materials that can serve as EMW absorbers and supercapacitor electrodes.
- Open Access
- 8 December 2025
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 15 (57) , 49652-49660
First-principles investigation of the optical and piezoelectric properties of Janus TiOS monolayers
Using first-principles calculations, we systematically explore the geometric structures, stabilities, electronic structures, optical responses, and piezoelectric properties of Janus TiOS monolayers to assess their suitability for integrated photocatalytic and piezoelectric applications. The stability of both phases was assessed through formation energy calculations, phonon dispersion relations, AIMD simulations, and elastic constant analyses, which collectively confirm their dynamical, thermal, and mechanical stability. Electronic structure calculations reveal that the 1T-TiOS monolayer is a direct-band-gap semiconductor (Eg = 1.27 eV), whereas the 2H phase exhibits an indirect band gap of 1.52 eV. Charge-density analyses indicate that the CBM is mainly contributed by Ti 3d orbitals, while the VBM originates from S 2p states, providing a favourable orbital configuration for efficient charge separation. Both phases exhibit strong visible-light absorption, with absorption coefficients exceeding 1 × 105 cm−1. Remarkably, the 1T- and 2H-TiOS monolayers demonstrate strong potential as solar-driven photocatalysts for water splitting over a broad pH range (0–10). Furthermore, Janus TiOS monolayers show intrinsic and pronounced piezoelectric responses. For the 1T phase, the in-plane and out-of-plane piezoelectric coefficients are 4.99 and 0.32 pm V−1, respectively, while the corresponding values for the 2H phase are 2.38 and 0.27 pm V−1. These results indicate that Janus TiOS monolayers are promising candidates for next-generation materials integrating photocatalytic and piezoelectric functionalities.
- 8 December 2025
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 15 (57) , 49652-49660
Open AccessFirst-principles investigation of the optical and piezoelectric properties of Janus TiOS monolayers
Using first-principles calculations, we systematically explore the geometric structures, stabilities, electronic structures, optical responses, and piezoelectric properties of Janus TiOS monolayers to assess their suitability for integrated photocatalytic and piezoelectric applications. The stability of both phases was assessed through formation energy calculations, phonon dispersion relations, AIMD simulations, and elastic constant analyses, which collectively confirm their dynamical, thermal, and mechanical stability. Electronic structure calculations reveal that the 1T-TiOS monolayer is a direct-band-gap semiconductor (Eg = 1.27 eV), whereas the 2H phase exhibits an indirect band gap of 1.52 eV. Charge-density analyses indicate that the CBM is mainly contributed by Ti 3d orbitals, while the VBM originates from S 2p states, providing a favourable orbital configuration for efficient charge separation. Both phases exhibit strong visible-light absorption, with absorption coefficients exceeding 1 × 105 cm−1. Remarkably, the 1T- and 2H-TiOS monolayers demonstrate strong potential as solar-driven photocatalysts for water splitting over a broad pH range (0–10). Furthermore, Janus TiOS monolayers show intrinsic and pronounced piezoelectric responses. For the 1T phase, the in-plane and out-of-plane piezoelectric coefficients are 4.99 and 0.32 pm V−1, respectively, while the corresponding values for the 2H phase are 2.38 and 0.27 pm V−1. These results indicate that Janus TiOS monolayers are promising candidates for next-generation materials integrating photocatalytic and piezoelectric functionalities.
- 1 December 2025
- Published by Pleiades Publishing Ltd in Russian Journal of Physical Chemistry A
- Vol. 99 (13) , 3441-3446
First-Principles Calculations for S-Doped Mo2C Monolayer As Anode for Magnesium-Ion Batteries
First-principles calculations were performed to investigate the potential of S-doped Mo2C monolayer as an anode material for magnesium-ion batteries. Our results show that the adsorption energies of Mg on the H1, TC1, TMo1, and B4 sites of S-doped Mo2C are –1.647, –1.565, –1.501, and –1.516 eV, respectively, which are 14.5, 9.4, 6.8, and 7.7% lower than those on the pristine Mo2C monolayer. These findings indicate that S incorporation enhances Mg adsorption. Mg diffusion between two adjacent favorable sites via a symmetric site on S-doped Mo2C exhibits fast diffusion. Density-of-states calculations reveal metallic behavior and favorable electronic conductivity for S-doped Mo2C. Moreover, the S-doped Mo2C monolayer delivers a high theoretical capacity of 1040.02 mA h g–1. The open-circuit voltage ranges from 0.32 to 0.87 V, with an average value of 0.51 V. Consequently, S-doped Mo2C is a promising anode candidate for magnesium-ion batteries.
- 1 December 2025
- Published by Pleiades Publishing Ltd in Russian Journal of Physical Chemistry A
- Vol. 99 (13) , 3441-3446
First-Principles Calculations for S-Doped Mo2C Monolayer As Anode for Magnesium-Ion Batteries
First-principles calculations were performed to investigate the potential of S-doped Mo2C monolayer as an anode material for magnesium-ion batteries. Our results show that the adsorption energies of Mg on the H1, TC1, TMo1, and B4 sites of S-doped Mo2C are –1.647, –1.565, –1.501, and –1.516 eV, respectively, which are 14.5, 9.4, 6.8, and 7.7% lower than those on the pristine Mo2C monolayer. These findings indicate that S incorporation enhances Mg adsorption. Mg diffusion between two adjacent favorable sites via a symmetric site on S-doped Mo2C exhibits fast diffusion. Density-of-states calculations reveal metallic behavior and favorable electronic conductivity for S-doped Mo2C. Moreover, the S-doped Mo2C monolayer delivers a high theoretical capacity of 1040.02 mA h g–1. The open-circuit voltage ranges from 0.32 to 0.87 V, with an average value of 0.51 V. Consequently, S-doped Mo2C is a promising anode candidate for magnesium-ion batteries.
- 1 January 2025
- Published by Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences in Acta Physica Sinica
- Vol. 74 (18) , 188201-188201-9
First-principles study of boron-doped graphene/blue-phosphorus heterojunction as anode materials for magnesium-ion batteries
采用基于密度泛函理论的第一性原理计算方法, 讨论了不同浓度硼(B)掺杂石墨烯/蓝磷异质结BiGr/BP (i = 0, 1, 2, 3, 4)的几何结构、稳定性、电子性质以及对镁(Mg)的吸附能力. 结果表明, B掺杂后, 异质结保持结构稳定, 费米能级下移且贯穿多条能带, 材料导电性增强. 随着掺杂浓度的增大, 材料对Mg的吸附能力逐渐增强. 当B掺杂浓度i = 4 (原子个数)时, B4Gr/BP保持热力学稳定, 展现出优异的导电性, 较强的Mg吸附能力(–3.38 eV), 较低的扩散势垒(0.47 eV), 理想的平均开路电压(0.37 V)以及合适的理论容量(286.04 mAh/g). 这表明, B掺杂能有效改善石墨烯/蓝磷(Gr/BP)储镁性能, 特别是B4Gr/BP性能优异, 有望成为镁离子电池阳极的候选材料.
- 1 January 2025
- Published by Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences in Acta Physica Sinica
- Vol. 74 (18) , 188201-188201-9
First-principles study of boron-doped graphene/blue-phosphorus heterojunction as anode materials for magnesium-ion batteries
采用基于密度泛函理论的第一性原理计算方法, 讨论了不同浓度硼(B)掺杂石墨烯/蓝磷异质结BiGr/BP (i = 0, 1, 2, 3, 4)的几何结构、稳定性、电子性质以及对镁(Mg)的吸附能力. 结果表明, B掺杂后, 异质结保持结构稳定, 费米能级下移且贯穿多条能带, 材料导电性增强. 随着掺杂浓度的增大, 材料对Mg的吸附能力逐渐增强. 当B掺杂浓度i = 4 (原子个数)时, B4Gr/BP保持热力学稳定, 展现出优异的导电性, 较强的Mg吸附能力(–3.38 eV), 较低的扩散势垒(0.47 eV), 理想的平均开路电压(0.37 V)以及合适的理论容量(286.04 mAh/g). 这表明, B掺杂能有效改善石墨烯/蓝磷(Gr/BP)储镁性能, 特别是B4Gr/BP性能优异, 有望成为镁离子电池阳极的候选材料.
- Open Access
- 1 March 2023
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 2459 (1) , 012019
Adsorption and diffusion of sodium on boron-doped carbon nanotube
The first principles have been performed to investigated the performance of the boron-doped (B-doped) carbon nanotube for sodium-ion batteries. The Na adsorption energies at H1 and B1 sites are -2.821 eV and -2.523 eV, which have decreased by 0.985 and 0.846 eV as compared with pure CNT, respectively. The results indicate that B-doped CNT is beneficial for Na adsorption. The Na diffusing between two hollow sites across the TC1 and B1 sites shows low barriers of 0.309 eV. Additionally, the projected density of states (PDOS) shows that B-doped CNT exhibits metallicity and non-magnetic properties with Na adsorption, which is beneficial for electron transfer. The PDOS move towards higher energy levels, which is beneficial to enhance conductivity. These results suggest that B-doped CNT shows high performance as anode for sodium-ion batteries.
- 1 March 2023
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 2459 (1) , 012019
Open AccessAdsorption and diffusion of sodium on boron-doped carbon nanotube
The first principles have been performed to investigated the performance of the boron-doped (B-doped) carbon nanotube for sodium-ion batteries. The Na adsorption energies at H1 and B1 sites are -2.821 eV and -2.523 eV, which have decreased by 0.985 and 0.846 eV as compared with pure CNT, respectively. The results indicate that B-doped CNT is beneficial for Na adsorption. The Na diffusing between two hollow sites across the TC1 and B1 sites shows low barriers of 0.309 eV. Additionally, the projected density of states (PDOS) shows that B-doped CNT exhibits metallicity and non-magnetic properties with Na adsorption, which is beneficial for electron transfer. The PDOS move towards higher energy levels, which is beneficial to enhance conductivity. These results suggest that B-doped CNT shows high performance as anode for sodium-ion batteries.
- 30 October 2021
- Published by Springer Nature in Journal of Molecular Modeling
- Vol. 27 (11) , 1-7
Adsorption and diffusion of magnesium on nitrogen-doped Mo2C monolayer
The Mg adsorption and diffusion behaviors on nitrogen-doped (N-doped) Mo2C monolayer have been investigated by the first principles based on density functional theory (DFT). To investigate the effect of nitrogen concentration on adsorption energies, Mo2C1−xNx (x=0.0625, 0.125, 0.1875, and 0.25) with four different nitrogen doping concentrations have been considered in the present work. The results show that N-doped Mo2C is benefit for Mg adsorption. In particular, when the doping concentration reaches to 14.29%, the adsorption energies of Mg on Mo2C0.875N0.125 are in the region between −1.639 and −1.517 eV, e.g., the adsorption energies of Mg on TC1 and H2 sites are −1.639 eV and −1.625 eV, which are decreased by 16.49% and 18.43% as compared with the pristine Mo2C. The calculations on diffusion behaviors show that the Mg diffusing between two adjacent favored sites via a high-symmetry site along H3-B-H4 and H1-B-H1 paths possesses the barriers of 0.021 eV and 0.028 eV. Additionally, the partial density of states (PDOS) reveals the interaction between Mg and Mo2C0.875N0.125, and indicates that nitrogen doping causes the PDOS peaks transfer to a lower energy level, which is benefit for the bonding between Mg and Mo2C0.875N0.125. These results suggest that the adsorption and diffusion behaviors of Mg have been enhanced by nitrogen doping.
- 30 October 2021
- Published by Springer Nature in Journal of Molecular Modeling
- Vol. 27 (11) , 1-7
Adsorption and diffusion of magnesium on nitrogen-doped Mo2C monolayer
The Mg adsorption and diffusion behaviors on nitrogen-doped (N-doped) Mo2C monolayer have been investigated by the first principles based on density functional theory (DFT). To investigate the effect of nitrogen concentration on adsorption energies, Mo2C1−xNx (x=0.0625, 0.125, 0.1875, and 0.25) with four different nitrogen doping concentrations have been considered in the present work. The results show that N-doped Mo2C is benefit for Mg adsorption. In particular, when the doping concentration reaches to 14.29%, the adsorption energies of Mg on Mo2C0.875N0.125 are in the region between −1.639 and −1.517 eV, e.g., the adsorption energies of Mg on TC1 and H2 sites are −1.639 eV and −1.625 eV, which are decreased by 16.49% and 18.43% as compared with the pristine Mo2C. The calculations on diffusion behaviors show that the Mg diffusing between two adjacent favored sites via a high-symmetry site along H3-B-H4 and H1-B-H1 paths possesses the barriers of 0.021 eV and 0.028 eV. Additionally, the partial density of states (PDOS) reveals the interaction between Mg and Mo2C0.875N0.125, and indicates that nitrogen doping causes the PDOS peaks transfer to a lower energy level, which is benefit for the bonding between Mg and Mo2C0.875N0.125. These results suggest that the adsorption and diffusion behaviors of Mg have been enhanced by nitrogen doping.
- Open Access
- 30 April 2021
- Published by Springer Nature in Research Square
Adsorption and Diffusion of Magnesium on Nitrogen Doped Mo2C Monolayer
The Mg adsorption and diffusion behaviors on nitrogen doped (N-doped) Mo2C monolayer have been systematically investigated by the first principles based on density functional theory (DFT). The adsorption energies of Mg on pristine Mo2C and Mo2C1 − xNx (x = 0.0625, 0.125, 0.1875 and 0.25) have been studied. The adsorption energies of Mg on N-doped Mo2C are lower than that of pristine Mo2C. Especially, the adsorption energies of Mg are − 1.639 eV and − 1.625 eV on TC1 and H2 sites for Mo2C0.875N0.125, which have decreased by 16.49% and 18.43%. Furthermore, the Mg diffuses along H3-B-H4 and H-B-H with the barriers of 0.021 eV and 0.028 eV, which indicate that Mo2C0.875N0.125 exhibits fast diffusion properties. Additionally, the partial density of states (PDOS) reveals the interaction between Mg and Mo2C0.875N0.125. The PDOS results indicate that nitrogen doping causes the PDOS peaks transfer to a lower energy level, which is benefit for the bonding between Mg and MoC0.875N0.125. These results suggest that the adsorption and diffusion behaviors of Mg are enhanced by nitrogen doping.
- 30 April 2021
- Published by Springer Nature in Research Square
Open AccessAdsorption and Diffusion of Magnesium on Nitrogen Doped Mo2C Monolayer
The Mg adsorption and diffusion behaviors on nitrogen doped (N-doped) Mo2C monolayer have been systematically investigated by the first principles based on density functional theory (DFT). The adsorption energies of Mg on pristine Mo2C and Mo2C1 − xNx (x = 0.0625, 0.125, 0.1875 and 0.25) have been studied. The adsorption energies of Mg on N-doped Mo2C are lower than that of pristine Mo2C. Especially, the adsorption energies of Mg are − 1.639 eV and − 1.625 eV on TC1 and H2 sites for Mo2C0.875N0.125, which have decreased by 16.49% and 18.43%. Furthermore, the Mg diffuses along H3-B-H4 and H-B-H with the barriers of 0.021 eV and 0.028 eV, which indicate that Mo2C0.875N0.125 exhibits fast diffusion properties. Additionally, the partial density of states (PDOS) reveals the interaction between Mg and Mo2C0.875N0.125. The PDOS results indicate that nitrogen doping causes the PDOS peaks transfer to a lower energy level, which is benefit for the bonding between Mg and MoC0.875N0.125. These results suggest that the adsorption and diffusion behaviors of Mg are enhanced by nitrogen doping.
- 26 March 2020
- Published by Springer Nature in Journal of Molecular Modeling
- Vol. 26 (4) , 1-7
Monolayer Mo2C as anodes for magnesium-ion batteries
The adsorption and diffusion behaviors of magnesium (Mg) on monolayer Mo2C have been investigated by the first principles method based on density functional theory (DFT). The structural stability and theoretical capacity of monolayer Mo2C as anodes for magnesium-ion batteries (MIBs) have also been investigated. The results show that Mg prefer to occupy the H and TC sites with the adsorption energies of − 1.439 and − 1.430, respectively, followed by B and TMo sites on Mo2C monolayer. The Mg prefers to diffuse along the H-TC-H path, furthermore, the other two possible paths (along H-B-H and H-TMo-H) also possess quite low energy barrier with the value of about 0.039 eV. The present results demonstrate that the adsorption energy per Mg atom and the volume expansion change mildly. The volume expansions change slightly from 0.7 to 7.08% with the variety of x, ranging from 0.167 to 2.0. The theoretical gravimetric capacity reaches to 469.791 mAhg−1 with relatively small deformation and expansion as x = 2.0. The results mentioned above suggest that Mo2C monolayer is one of the promising candidates for anode material of MIBs.
- 26 March 2020
- Published by Springer Nature in Journal of Molecular Modeling
- Vol. 26 (4) , 1-7
Monolayer Mo2C as anodes for magnesium-ion batteries
The adsorption and diffusion behaviors of magnesium (Mg) on monolayer Mo2C have been investigated by the first principles method based on density functional theory (DFT). The structural stability and theoretical capacity of monolayer Mo2C as anodes for magnesium-ion batteries (MIBs) have also been investigated. The results show that Mg prefer to occupy the H and TC sites with the adsorption energies of − 1.439 and − 1.430, respectively, followed by B and TMo sites on Mo2C monolayer. The Mg prefers to diffuse along the H-TC-H path, furthermore, the other two possible paths (along H-B-H and H-TMo-H) also possess quite low energy barrier with the value of about 0.039 eV. The present results demonstrate that the adsorption energy per Mg atom and the volume expansion change mildly. The volume expansions change slightly from 0.7 to 7.08% with the variety of x, ranging from 0.167 to 2.0. The theoretical gravimetric capacity reaches to 469.791 mAhg−1 with relatively small deformation and expansion as x = 2.0. The results mentioned above suggest that Mo2C monolayer is one of the promising candidates for anode material of MIBs.
- 31 October 2018
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 20 (46) , 29423-29429
Catalytic activity for the hydrogen evolution reaction of edges in Janus monolayer MoXY (X/Y = S, Se, and Te)
Monolayer transition metal dichalcogenides (TMDs) have been regarded as the most promising low-cost alternatives to noble metals as catalysts for the hydrogen evolution reaction (HER). However, their limited catalytically active sites for the HER hinder their practical application. In this paper, the catalytic performances of the edge sites of Janus monolayer MoXY (X/Y = S, Se and Te) were investigated using density functional theory. The results show that both the Mo-edge and chalcogen atomic edges of Janus monolayer MoXY are catalytically active for the HER; thus Janus monolayer MoXY exhibits better catalytic performance than monolayer MoS2. These results are useful for the improvement of the catalytic performance of TMDs by the formation of the Janus monolayer MoXY.
- 31 October 2018
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 20 (46) , 29423-29429
Catalytic activity for the hydrogen evolution reaction of edges in Janus monolayer MoXY (X/Y = S, Se, and Te)
Monolayer transition metal dichalcogenides (TMDs) have been regarded as the most promising low-cost alternatives to noble metals as catalysts for the hydrogen evolution reaction (HER). However, their limited catalytically active sites for the HER hinder their practical application. In this paper, the catalytic performances of the edge sites of Janus monolayer MoXY (X/Y = S, Se and Te) were investigated using density functional theory. The results show that both the Mo-edge and chalcogen atomic edges of Janus monolayer MoXY are catalytically active for the HER; thus Janus monolayer MoXY exhibits better catalytic performance than monolayer MoS2. These results are useful for the improvement of the catalytic performance of TMDs by the formation of the Janus monolayer MoXY.
- 8 January 2018
- Published by World Scientific Pub Co Pte Ltd in International Journal of Modern Physics B
- Vol. 32 (01)
Graphene/blue-phosphorus heterostructure as potential anode materials for sodium-ion batteries
- 8 January 2018
- Published by World Scientific Pub Co Pte Ltd in International Journal of Modern Physics B
- Vol. 32 (01)
Graphene/blue-phosphorus heterostructure as potential anode materials for sodium-ion batteries