HTHitoshi Tabata

Hitoshi Tabata

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Hitoshi Tabata has a total of 172 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Terahertz surface plasmonics for bio-related materials and Dirac-type materials

    by Hitoshi Tabata

    The terahertz (THz) spectral region is particularly attractive for sensing intermolecular binding because it overlaps with low-energy intermolecular vibrations and collective modes in biomolecular systems. This spectral feature enables label-free interrogation of intermolecular interactions without fluorescent labeling. In this invited paper, we summarize our recent studies on THz surface plasmon resonance (THz-SPR), in which plasmonic field enhancement is combined with intermolecular vibrational resonances to enable direct detection of specific intermolecular interactions. While previous studies on THz-SPR using topological insulators (TIs) have mainly focused on theoretical analyses or on plasmon excitation itself, experimental demonstrations of label-free detection of biomolecular intermolecular binding remain limited. Using a Bi2Se3 grating device, we demonstrate direct detection of several biologically important intermolecular interactions that are difficult to access with conventional visible-light SPR. We further discuss the physical origin of the observed response, the material requirements for THz-SPR in Dirac-electron systems, and the present limitations and future prospects of THz-SPR devices for biomedical sensing.

  • Open Access

    Epitaxial lift-off of La2/3Sr1/3MnO3 membranes enabled by BaO sacrificial layers and restoration of the Curie temperature

    by Takahito Takeda, Daigo Matsubara, Yuki K. Wakabayashi, Kohei Yamagami, Munetoshi Seki, Hitoshi Tabata, Le Duc Anh, Masaki Kobayashi, Masaaki Tanaka, Shinobu Ohya

    Ultrathin complex-oxide membranes provide a powerful platform for strain engineering, interfacial control, and heterogeneous integration; however, their formation remains constrained by the availability and performance of suitable water-soluble sacrificial layers. This study demonstrates that barium oxide (BaO) serves as a highly efficient and rapidly dissolving water-soluble sacrificial layer, enabling the epitaxial lift-off and transfer of ultrathin La2/3Sr1/3MnO3 (LSMO) membranes onto SiOx/Si substrates. LSMO membranes with a thickness of ∼8 nm are released using a BaO sacrificial layer grown by molecular beam epitaxy, while high crystallinity is preserved and Ba interdiffusion is limited to a narrow interfacial region of ∼0.5 nm. Post-transfer oxygen annealing at 600 °C increases the Curie temperature (TC) from 342 to 346 K by eliminating Mn2+ states associated with oxygen vacancies generated through oxygen extraction into the BaO layer. These results show that BaO provides a fast, scalable, and compositionally simple route for complex-oxide membrane release, while brief oxygen annealing is essential to restore the optimal Mn valence state and achieve the intrinsic high TC. These findings are directly relevant to oxide-based electronic and spintronic applications.

  • Open Access

    Large spin-valve effect in a perovskite-oxide (La, Sr)MnO3-based lateral device incorporating a LaMnO3 buffer layer

    by Aoi Nakamura, Tatsuro Endo, Munetoshi Seki, Hitoshi Tabata, Masaaki Tanaka, Shinobu Ohya

    A spin metal–oxide–semiconductor field-effect transistor (spin-MOSFET) is highly required for innovative, ultra-fast, nonvolatile memory, and logic devices in the next generation of technology. A key focus in developing spin-MOSFETs is achieving high magnetoresistance (MR) ratios. In Si-based spin-MOSFETs, which have currently been the most actively studied, the MR ratios are limited to ∼1%. Recently, spin-MOSFETs based on perovskite oxide (La2/3, Sr1/3)MnO3 (LSMO) demonstrated large MR ratios of up to ∼140% at 3 K. The channel of the device was made using Ar irradiation to induce a metal–semiconductor transition in LSMO. In this method, however, the channel was formed in a dead layer, which was generated in LSMO near the interface with the SrTiO3 (STO) substrate and is magnetically inactive. This issue makes the full use of the potential of LSMO difficult. Meanwhile, the insertion of a LaMnO3 (LMO) buffer layer between LSMO and STO is known to suppress the formation of the dead layer in LSMO. In this study, we make an LSMO-based spin-MOSFET using an LMO buffer layer on STO. Although the channel length defined by lithography is approximately three times longer than that in the previous study, we observe a large MR ratio of up to ∼10%, which can be attributed to the suppression of the dead layer in LSMO. Furthermore, we demonstrate magnetic anisotropy modulation in LSMO driven by the shape magnetic anisotropy from the device structure. Our results suggest that LMO is a promising buffer-layer material capable of enriching the functionality of LSMO-based spin devices.

  • Open Access

    Coherent transport in strongly correlated perovskite-manganite quantum wells

    by Tatsuro Endo, Yasufumi Araki, Munetoshi Seki, Hitoshi Tabata, Masaaki Tanaka, Shinobu Ohya

    Perovskite transition metal oxides (TMOs) are hallmark systems for studying electron correlations, with strong Coulomb interactions reaching the electron volt scale. Such interactions generally hinder coherent charge transport, limiting its observation to only moderately correlated TMOs. Among TMOs with strong electron correlations, the ferromagnetic perovskite manganite La1−xSrxMnO3 (LSMO) has attracted significant attention for spintronics applications due to its half-metallic nature and robust ferromagnetism, with a Curie temperature above room temperature. In this Letter, we report the emergence of oscillatory conduction in tunnel diodes incorporating an epitaxial thin LSMO layer—a phenomenon not previously observed in strongly correlated oxides. The observed oscillations originate from discrete quantum-well states formed via quantum confinement, indicating coherent transport across the LSMO layer. These quantum-well states are quantitatively explained using a tight-binding model tailored for the electronic structure of LSMO. Our findings demonstrate that high-quality epitaxial perovskite manganites can sustain coherent transport, even in the presence of strong electron correlations, offering avenues for oxide-based quantum and spintronics devices.


  • Open Access

    Effective detection of acetone gas molecules using PLD deposited tungsten oxide microwires for biomedical applications

    by Sankar Ganesh Ramaraj, Keying Huang, Amal Musa Alrebh, Meera Almansoori, Chuanlai Zang, Jiaqi Yang, Md Shamim Sarker, Hiroyasu Yamahara, Hitoshi Tabata

    Skin gas sensors offer a non-invasive route for monitoring biomarkers such as acetone, relevant to metabolic conditions like diabetes. In this study, WO3 thin films were deposited on LaAlO3 (100) substrates via pulsed laser deposition and evaluated for acetone sensing. X-ray diffraction analysis confirmed the formation of highly crystalline WO3 thin films at 600 °C. Atomic force microscopy analysis revealed a uniform film morphology with nanoscale grain structures, emphasizing the role of grain size in enhancing the gas adsorption and diffusion. The amorphous films exhibited an excellent response at 300 °C, detecting concentrations as low as 100 ppb in an air atmosphere. In addition, the fabricated sensor exhibited rapid response (19 s) and recovery (20 s) times. Distinct sensing mechanisms were observed under dry and ambient air conditions, indicating the influence of humidity and oxygen species. These findings demonstrate the significance of substrate selection, deposition parameters, and post-annealing treatment in tuning the structural and functional properties of WO3-based thin film gas sensors for ultra-low detection of acetone gas molecules.


  • Open Access

    Improved Isolation Ratio in MSSWs‐Based Inline Interference Device Using Dipolar‐Coupled SWs Across a Micro‐Air Gap

    by Shamim Sarker, E M K Ikball Ahamed, Hiroyasu Yamahara, Zhiqiang Liao, Siyi Tang, Haining Li, Sankar Ganesh Ramaraj, Munetoshi Seki, Hitoshi Tabata

    Control of spin‐wave (SW) propagation is demonstrated by introducing a micro‐air gap into a nanometer‐thick yttrium iron garnet (Y3Fe5O12, YIG) microstructure. SWs traverse the gap with reduced intensity following an exponential–linear decay with air gap length, attributed to coupling between incident and reflected dipolar SWs via a time‐varying stray magnetic field. By tuning gap length, SW intensity is balanced to address nonreciprocity in counterpropagating magnetostatic surface SWs within an inline interference device. Introducing asymmetric gaps equalizes signal amplitudes and enhances the isolation ratio from 16 to 50 dB, the highest reported for such devices. This approach is applicable to SW‐based logic gates and magnetic sensors, with the steep interference profile enabling high sensitivity at room temperature. The air gap also modifies SW transport properties, doubling group velocity from ≈2 km s−1 in the reference device to 4.4 km s−1 for a 66 µm gap at 22 mT, and inducing phase shifts of up to ≈37° for a 1 µm gap change (2–3 µm). These results establish a practical route to high‐isolation magnonic interference devices and provide tunable control of group velocity and phase, enabling reconfigurable components such as delay lines and microwave phase shifters.

  • Open Access

    Enhanced Switching Performance in Single‐Crystalline PbTiO 3 Ferroelectric Memristors for Replicating Synaptic Plasticity

    by Haining Li, Zhiqiang Liao, Risa Kataoka, Md Sarker Shamim, Takeshi Kijima, Hiroyasu Yamahara, Hitoshi Tabata, Munetoshi Seki

    A large ON/OFF ratio in a memristor provides reliable state distinction, enabling precise weight updates to emulate synaptic plasticity. A well‐reproduced ferroelectric polarization in the perovskite oxide single layer obtained by growing high‐quality single crystals plays an important role in elevating the ON/OFF ratio. Herein, a single‐crystalline PbTiO 3 ‐based ferroelectric memristor is demonstrated, and structural investigations confirm its extremely sharp interface, well‐ordered lattice structure, and epitaxial growth. Pt/PbTiO 3 /Nb:SrTiO 3 metal–ferroelectric–semiconductor memristors exhibit promising resistive switching properties, including high repeatability, good endurance, long retention, and a larger ON/OFF ratio >10 5 (stable over 1200 for retention), which is larger than that of most single‐layer BaTiO 3 and BiFeO 3 memristors. PbTiO 3 ‐based memristors effectively mimic key synaptic plasticity, including spike‐amplitude‐dependent plasticity, paired‐pulse facilitation/depression, spike‐rate‐dependent plasticity, short‐term memory, transition from short‐term memory to long‐term memory, long‐term memory, and spike‐timing‐dependent plasticity. These have been systematically investigated based on stable pulse training on resistance modulations. Simulations of neuromorphic computing for different neuron network structures achieved pattern recognition rates of approximately 92%–96%, indicating high accuracy and versatility. This paper introduces an effective and straightforward strategy for enhancing the ON/OFF ratio of ferroelectric PbTiO 3 memristors, reinforcing their potential for use in hardware‐based neural networks.


  • Open Access

    Room-temperature spin-glass behaviors and memory effects in Al-substituted Y3Fe5O12 epitaxial film grown by pulsed laser deposition

    by Takahiro Yoshino, Siyi Tang, Shamim Sarker, Emk Ikball Ahamed, Zhiqiang Liao, Hiroyasu Yamahara, Hitoshi Tabata, Munetoshi Seki

    This study explores the magnetic properties of a thin film of Al-substituted Y3Fe5O12 grown on Y3Al5O12 (111) substrates using pulsed laser deposition. Spin-glass behavior was observed near room temperature in the film, with a spin-freezing temperature of 345 K achieved. This temperature is significantly higher than those previously reported for spin-glass systems based on Fe oxides. The film exhibited characteristic memory and rejuvenation effects below the spin-freezing temperature, which are explained by magnetic relaxation via metastable states within a multi-valley energy landscape featuring shallow activation energies. Additionally, photomagnetic memory effects were demonstrated using the magneto-optic effect of the film at room temperature. Our results highlight the potential application of the Al-substituted Y3Fe5O12 film in neuromorphic devices with low energy consumption.


  • Advanced low loss PCF-based SPR sensor for enhanced sensor length configurations flexibility with exceptional superior sensing performance capability

    by Amit Das, Abu Huraiya, Ilias Rahman, Kisalaya Chakrabarti, Hitoshi Tabata, Sankar Ganesh Ramaraj, Mahmoud M. A. Eid, Ahmed Nabih Zaki Rashed, S. M. Abdur Razzak


  • Ultra-Sensitive Au-based Circular Photonic Fibers Based Surface Plasmonic Resonance Biosensor for Various Cancer Level Diagnostics and Detection

    by Abu Huraiya, Momen Sahriar Shoshi, Kisalaya Chakrabarti, Hitoshi Tabata, Sankar Ganesh Ramaraj, S. M. Abdur Razzak, Mahmoud M. A. Eid, Ahmed Nabih Zaki Rashed