Khalida Ghanem
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Khalida Ghanem has a total of 55 co-authors. Here are the top co-authors by number of shared publications:
- Widad Belaoura
Department of Electrical Systems Engineering, Faculty of Technology, Boumerdes University, Boumerdes, Algeria
4 shared publications - Mourad Nedil
Department of Electrical Engineering, Universit du Qubec en Abitibi-Tmiscamingue (UQAT), Val-dOr, QC, Canada
3 shared publications - Akram Alomainy
School of Electronic Engineering and Computer Science, Queen Mary University of London, London, U.K.
2 shared publications - Bjoern Michael Eskofier
Friedrich-Alexander-Universität Erlangen-Nürnberg
2 shared publications - Chellali Slimani
Ècole Supérieure Ali CHABATI, Algiers, Algeria
2 shared publications - Farid Ghanem
Independent consultant, Montreal, Canada
2 shared publications
Latest Publications
- 16 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Biomedical and Health Informatics
- Vol. PP (21682194) , 1-11
Systematic Investigation of Heart Sound Propagation Using Continuous Wave Radar
Monitoring the propagation of mechanical cardiac signals throughout the body is crucial for assessing cardiovascular health. A common drawback of current gold standard methods for vital sign monitoring is the necessity for continuous skin contact. Radar-based sensing offers a promising alternative by enabling contactless measurement of cardiac activity, including heart sound signals. As previous research has primarily focused on deriving signals from proximal body regions, insights into heart sound propagation to peripheral areas are lacking. To address this, we systematically investigated whether radar-based heart sound detection and propagation measurement is feasible across the whole body. We recorded heart sounds in N=22 participants sequentially at eleven locations using a custom-built continuous-wave radar system and phonocardiogram as heart sound gold standard. Additionally, an electrocardiogram was acquired as reference for overall heart activity. After synchronization and preprocessing, we manually segmented the heart sounds and extracted temporal characteristics from ensemble-averaged signals. Our findings show that heart sounds can be detected across the entire body with the radar-based as well as the gold standard system. Furthermore, the heart sounds' temporal characteristics vary between measurement locations. As the distance to the heart increases, we observed significantly increased propagation time intervals. This finding is consistent across both systems, exhibiting a strong agreement for the first heart sound ($\mathbf {r = 0.73, p < 0.001}$) and a moderate agreement for the second heart sound ($\mathbf {r = 0.56, p < 0.001}$). In conclusion, our work is the first to demonstrate that radar-based systems are feasible for contactless evaluation of heart sound propagation, offering new possibilities for research and health monitoring.
- 16 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Biomedical and Health Informatics
- Vol. PP (21682194) , 1-11
Systematic Investigation of Heart Sound Propagation Using Continuous Wave Radar
Monitoring the propagation of mechanical cardiac signals throughout the body is crucial for assessing cardiovascular health. A common drawback of current gold standard methods for vital sign monitoring is the necessity for continuous skin contact. Radar-based sensing offers a promising alternative by enabling contactless measurement of cardiac activity, including heart sound signals. As previous research has primarily focused on deriving signals from proximal body regions, insights into heart sound propagation to peripheral areas are lacking. To address this, we systematically investigated whether radar-based heart sound detection and propagation measurement is feasible across the whole body. We recorded heart sounds in N=22 participants sequentially at eleven locations using a custom-built continuous-wave radar system and phonocardiogram as heart sound gold standard. Additionally, an electrocardiogram was acquired as reference for overall heart activity. After synchronization and preprocessing, we manually segmented the heart sounds and extracted temporal characteristics from ensemble-averaged signals. Our findings show that heart sounds can be detected across the entire body with the radar-based as well as the gold standard system. Furthermore, the heart sounds' temporal characteristics vary between measurement locations. As the distance to the heart increases, we observed significantly increased propagation time intervals. This finding is consistent across both systems, exhibiting a strong agreement for the first heart sound ($\mathbf {r = 0.73, p < 0.001}$) and a moderate agreement for the second heart sound ($\mathbf {r = 0.56, p < 0.001}$). In conclusion, our work is the first to demonstrate that radar-based systems are feasible for contactless evaluation of heart sound propagation, offering new possibilities for research and health monitoring.
- 4 November 2024
- Published by Springer Nature in Annals of Telecommunications
- Vol. 80 (7-8) , 591-597
A new spatial modulation scheme exploiting linear frequency modulation
- 4 November 2024
- Published by Springer Nature in Annals of Telecommunications
- Vol. 80 (7-8) , 591-597
A new spatial modulation scheme exploiting linear frequency modulation
- Open Access
- 18 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of the Computer Society
- Vol. 5, 566-577
Exploring the Potential of Deep-Learning and Machine-Learning in Dual-Band Antenna Design
This paper presents an in-depth exploration of machine learning (ML) and deep learning (DL) for the optimization and design of dual-band antennas in Internet of Things (IoT) applications. Dual-band antennas, which are essential for the functionality of current and forthcoming flexible wireless communication systems, face increasing complexity and design challenges as demands and requirements for IoT-connected devices become more challenging. The study demonstrates how AI can streamline the antenna design process, enabling customization for specific frequency ranges or performance characteristics without exhaustive manual tuning. By utilizing ML and DL tools, this research not only enhances the efficiency of the design process but also achieves optimal antenna performance with significant time savings. The integration of AI in antenna design marks a notable advancement over traditional methods, offering a systematic approach to achieving dual-band functionality tailored to modern communication needs. We approached the antenna design as a regression problem, using the reflection coefficient, operating frequency, bandwidth, and voltage standing wave ratio as input parameters. The ML and DL models then are used to predict the corresponding design parameters for the antenna by using 1,000 samples, from which 700 are allocated for training and 300 for testing. This effectiveness of this approach is demonstrated through the successful application of various ML techniques, including Fine Gaussian Support Vector Machines (SVM), as well as Regressor and Residual Neural Networks (ResNet) with different activation functions, to optimize the design of a dual-band T-shaped monopole antenna, thereby substantiating AI's transformative potential in antenna design.
- 18 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of the Computer Society
- Vol. 5, 566-577
Open AccessExploring the Potential of Deep-Learning and Machine-Learning in Dual-Band Antenna Design
This paper presents an in-depth exploration of machine learning (ML) and deep learning (DL) for the optimization and design of dual-band antennas in Internet of Things (IoT) applications. Dual-band antennas, which are essential for the functionality of current and forthcoming flexible wireless communication systems, face increasing complexity and design challenges as demands and requirements for IoT-connected devices become more challenging. The study demonstrates how AI can streamline the antenna design process, enabling customization for specific frequency ranges or performance characteristics without exhaustive manual tuning. By utilizing ML and DL tools, this research not only enhances the efficiency of the design process but also achieves optimal antenna performance with significant time savings. The integration of AI in antenna design marks a notable advancement over traditional methods, offering a systematic approach to achieving dual-band functionality tailored to modern communication needs. We approached the antenna design as a regression problem, using the reflection coefficient, operating frequency, bandwidth, and voltage standing wave ratio as input parameters. The ML and DL models then are used to predict the corresponding design parameters for the antenna by using 1,000 samples, from which 700 are allocated for training and 300 for testing. This effectiveness of this approach is demonstrated through the successful application of various ML techniques, including Fine Gaussian Support Vector Machines (SVM), as well as Regressor and Residual Neural Networks (ResNet) with different activation functions, to optimize the design of a dual-band T-shaped monopole antenna, thereby substantiating AI's transformative potential in antenna design.
- 2 September 2024
- Published by IOP Publishing in Physica Scripta
- Vol. 99 (10) , 105502
Numerical investigation of non-uniform arrays of directive antennas for radiation pattern analysis using spatial modulation schemes
This research presents a novel Non-Uniform Array (NUA) design for Spatial Modulation (SM) systems, aiming to improve Bit Error Rate (BER) performance. The NUA utilizes directional antennas with low-similarity radiation patterns, enabling the receiver to effectively distinguish between signals transmitted from different antenna elements. This enhanced signal discrimination capability directly contributes to improved system capacity and potential spectral efficiency gains for massive MIMO systems employing SM techniques. The proposed NUA was optimized for operation at 5.2 GHz, achieving a high degree of pattern distinguishability. Measured results confirm the effectiveness of the design, demonstrating good agreement with simulations. Moreover, an analysis based on the similarity of the radiation pattern was conducted
- 2 September 2024
- Published by IOP Publishing in Physica Scripta
- Vol. 99 (10) , 105502
Numerical investigation of non-uniform arrays of directive antennas for radiation pattern analysis using spatial modulation schemes
This research presents a novel Non-Uniform Array (NUA) design for Spatial Modulation (SM) systems, aiming to improve Bit Error Rate (BER) performance. The NUA utilizes directional antennas with low-similarity radiation patterns, enabling the receiver to effectively distinguish between signals transmitted from different antenna elements. This enhanced signal discrimination capability directly contributes to improved system capacity and potential spectral efficiency gains for massive MIMO systems employing SM techniques. The proposed NUA was optimized for operation at 5.2 GHz, achieving a high degree of pattern distinguishability. Measured results confirm the effectiveness of the design, demonstrating good agreement with simulations. Moreover, an analysis based on the similarity of the radiation pattern was conducted
- 11 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 22 (12) , 12245-12252
Integration of Spatial Modulation Scheme With Code Division Multiple Access for VIVO Based Frequency Selective Nano Sensor Networks
Due to their suitability for human-body based communications, in-VIVO nano sensor networks are envisioned to use the promising Terahertz signals in order to ensure the forthcoming high-rate communication needs of the modern medicine. However, the propagation losses at these frequency bands are quite significant and dependent on the operation frequency as well as on the physiological characteristics, thus impeding the use of Terahertz rates to their utmost benefit. Using numerous emitting elements is likely to improve the quality of the received signal, but gives rise to multi-channel interference (MCI) emanating from multi-antenna signaling reception, which necessitates a relatively complex signal processing to mitigate it. When multiple physiological signals are of interest, detecting them necessitates to mitigate multiple-access interference (MAI). In this perspective, orthogonal frequency division multiplexing (OFDM) allows to combat the channel frequency selectivity, whereas code division multiple access (CDMA) scheme cancels MAI. In this paper, we propose to embed the novel spatial modulation technique with CDMA architecture in an OFDM framework to ensure a viable communication in in-VIVO frequency selective Nano channels. The immunity of our proposed solution to such an interference is confirmed, since less than -2 dB in SNR level is required to support 5 users simultaneously communicating with a BER which is inferior to 10-3 when the operating frequency is equal to 1THz. This hybrid scheme is shown to efficiently combat the MCI while enabling a safe retrieval of the useful signal at the very-high data rate communications.
- 11 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 22 (12) , 12245-12252
Integration of Spatial Modulation Scheme With Code Division Multiple Access for VIVO Based Frequency Selective Nano Sensor Networks
Due to their suitability for human-body based communications, in-VIVO nano sensor networks are envisioned to use the promising Terahertz signals in order to ensure the forthcoming high-rate communication needs of the modern medicine. However, the propagation losses at these frequency bands are quite significant and dependent on the operation frequency as well as on the physiological characteristics, thus impeding the use of Terahertz rates to their utmost benefit. Using numerous emitting elements is likely to improve the quality of the received signal, but gives rise to multi-channel interference (MCI) emanating from multi-antenna signaling reception, which necessitates a relatively complex signal processing to mitigate it. When multiple physiological signals are of interest, detecting them necessitates to mitigate multiple-access interference (MAI). In this perspective, orthogonal frequency division multiplexing (OFDM) allows to combat the channel frequency selectivity, whereas code division multiple access (CDMA) scheme cancels MAI. In this paper, we propose to embed the novel spatial modulation technique with CDMA architecture in an OFDM framework to ensure a viable communication in in-VIVO frequency selective Nano channels. The immunity of our proposed solution to such an interference is confirmed, since less than -2 dB in SNR level is required to support 5 users simultaneously communicating with a BER which is inferior to 10-3 when the operating frequency is equal to 1THz. This hybrid scheme is shown to efficiently combat the MCI while enabling a safe retrieval of the useful signal at the very-high data rate communications.
- Open Access
- 3 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 49611-49624
Performance and User Association Optimization for UAV Relay-Assisted mm-Wave Massive MIMO Systems
Unmanned aerial vehicle (UAV) relaying is deemed as a promising solution to enhance the achievable rate and widespread connectivity in millimeter-wave (mm-wave) systems for tomorrow’s 6G wireless networks. In this paper, we study both the performance and user association optimization for the UAV relay-assisted mm-wave massive multiple-input multiple-output (MIMO) communication system, where multiple base stations (BSs) serve their respective users with the help of one beamforming UAV relay. Both the beamforming and the UAV relay have essential impact on the achievable sum-rate of the system. Thus, a multi-user hybrid beamforming scheme is designed to mitigate the inter-user interference issues and achieve better trade-off between performance and complexity in UAV-enabled communications. Also, to exploit UAV relay-based architecture in serving different ground BS-user pairs, we propose a UAV relay-assisted multi-BS mm-wave massive MIMO system with hybrid beamforming architecture, which prevent sudden link disconnections caused by high path loss and line-of-sight (LoS) blockage in the mm-wave frequency band. Then, we formulate a user association problem with multiple constraints such that the sum-rate of the overall UAV relay-assisted mm-wave massive MIMO system is maximized. Simulation results are provided to demonstrate the effectiveness of the proposed UAV relay-enabled architecture.
- 3 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 49611-49624
Open AccessPerformance and User Association Optimization for UAV Relay-Assisted mm-Wave Massive MIMO Systems
Unmanned aerial vehicle (UAV) relaying is deemed as a promising solution to enhance the achievable rate and widespread connectivity in millimeter-wave (mm-wave) systems for tomorrow’s 6G wireless networks. In this paper, we study both the performance and user association optimization for the UAV relay-assisted mm-wave massive multiple-input multiple-output (MIMO) communication system, where multiple base stations (BSs) serve their respective users with the help of one beamforming UAV relay. Both the beamforming and the UAV relay have essential impact on the achievable sum-rate of the system. Thus, a multi-user hybrid beamforming scheme is designed to mitigate the inter-user interference issues and achieve better trade-off between performance and complexity in UAV-enabled communications. Also, to exploit UAV relay-based architecture in serving different ground BS-user pairs, we propose a UAV relay-assisted multi-BS mm-wave massive MIMO system with hybrid beamforming architecture, which prevent sudden link disconnections caused by high path loss and line-of-sight (LoS) blockage in the mm-wave frequency band. Then, we formulate a user association problem with multiple constraints such that the sum-rate of the overall UAV relay-assisted mm-wave massive MIMO system is maximized. Simulation results are provided to demonstrate the effectiveness of the proposed UAV relay-enabled architecture.
- 5 April 2022
- Published by Elsevier in Microprocessors and Microsystems
- Vol. 91
A hardware framework for fall detection using inertial sensors and compressed sensing
- 5 April 2022
- Published by Elsevier in Microprocessors and Microsystems
- Vol. 91
A hardware framework for fall detection using inertial sensors and compressed sensing
- 16 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 22 (8) , 8094-8103
Human Activity Recognition Based on the Fading Characteristics of the On-Body Channel
Several solutions using wearable devices for continuous Human Activity Recognition (HAR) have been proposed up to now, and HAR sensor-based methods are by far the most adopted. However, many data transmission obstacles prevent the viable operation of these systems, such as those related to deep channel fading, the shadowing of body links during movements, packet loss resulting from unpredictable and dynamic body movements, and environmental variations. In this work, a novel HAR approach based solely on on-body Received Signal Strength Indicator (RSSI) measurements of different body channels is presented to discriminate various human activities. In this perspective, a novel hierarchical threshold-based algorithm is proposed to classify RSSI data into two classes. The first one encompasses static movements. The second one groups dynamic movements. In this paper, the features provided to machine learning algorithms are unconventionnaly based on the statistical characterization parameters of the body channel in an indoor environment. These parameters include the average of the slow fading channel component and the fast fading component’s cumulative distribution function (CDF). In addition, the impact of the sliding window size adopted for the extraction of the slow fading component is investigated, as well as the impingement of the placement of the radio nodes on the body for the selection of the best on-body link for the transmission. It is shown that the proposed scheme provides higher accuracy compared to the state of the art radio-based HAR techniques and that the mislabeling problem is reduced by distinguishing between static and dynamic activities. Indeed, an approximate F1 score-based accuracy of 99% is obtained with a demeaning window size of 50 ms, considering the most informative channel.
- 16 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 22 (8) , 8094-8103
Human Activity Recognition Based on the Fading Characteristics of the On-Body Channel
Several solutions using wearable devices for continuous Human Activity Recognition (HAR) have been proposed up to now, and HAR sensor-based methods are by far the most adopted. However, many data transmission obstacles prevent the viable operation of these systems, such as those related to deep channel fading, the shadowing of body links during movements, packet loss resulting from unpredictable and dynamic body movements, and environmental variations. In this work, a novel HAR approach based solely on on-body Received Signal Strength Indicator (RSSI) measurements of different body channels is presented to discriminate various human activities. In this perspective, a novel hierarchical threshold-based algorithm is proposed to classify RSSI data into two classes. The first one encompasses static movements. The second one groups dynamic movements. In this paper, the features provided to machine learning algorithms are unconventionnaly based on the statistical characterization parameters of the body channel in an indoor environment. These parameters include the average of the slow fading channel component and the fast fading component’s cumulative distribution function (CDF). In addition, the impact of the sliding window size adopted for the extraction of the slow fading component is investigated, as well as the impingement of the placement of the radio nodes on the body for the selection of the best on-body link for the transmission. It is shown that the proposed scheme provides higher accuracy compared to the state of the art radio-based HAR techniques and that the mislabeling problem is reduced by distinguishing between static and dynamic activities. Indeed, an approximate F1 score-based accuracy of 99% is obtained with a demeaning window size of 50 ms, considering the most informative channel.
- Open Access
Artificial Intelligence based Anomaly Detection of Energy Consumption in Buildings: A Review, Current Trends and New Perspectives
Enormous amounts of data are being produced everyday by sub-meters and smart sensors installed in residential buildings. If leveraged properly, that data could assist end-users, energy producers and utility companies in detecting anomalous power consumption and understanding the causes of each anomaly. Therefore, anomaly detection could stop a minor problem becoming overwhelming. Moreover, it will aid in better decision-making to reduce wasted energy and promote sustainable and energy efficient behavior. In this regard, this paper is an in-depth review of existing anomaly detection frameworks for building energy consumption based on artificial intelligence. Specifically, an extensive survey is presented, in which a comprehensive taxonomy is introduced to classify existing algorithms based on different modules and parameters adopted, such as machine learning algorithms, feature extraction approaches, anomaly detection levels, computing platforms and application scenarios. To the best of the authors' knowledge, this is the first review article that discusses anomaly detection in building energy consumption. Moving forward, important findings along with domain-specific problems, difficulties and challenges that remain unresolved are thoroughly discussed, including the absence of: (i) precise definitions of anomalous power consumption, (ii) annotated datasets, (iii) unified metrics to assess the performance of existing solutions, (iv) platforms for reproducibility and (v) privacy-preservation. Following, insights about current research trends are discussed to widen the applications and effectiveness of the anomaly detection technology before deriving future directions attracting significant attention. This article serves as a comprehensive reference to understand the current technological progress in anomaly detection of energy consumption based on artificial intelligence.
Open AccessArtificial Intelligence based Anomaly Detection of Energy Consumption in Buildings: A Review, Current Trends and New Perspectives
Enormous amounts of data are being produced everyday by sub-meters and smart sensors installed in residential buildings. If leveraged properly, that data could assist end-users, energy producers and utility companies in detecting anomalous power consumption and understanding the causes of each anomaly. Therefore, anomaly detection could stop a minor problem becoming overwhelming. Moreover, it will aid in better decision-making to reduce wasted energy and promote sustainable and energy efficient behavior. In this regard, this paper is an in-depth review of existing anomaly detection frameworks for building energy consumption based on artificial intelligence. Specifically, an extensive survey is presented, in which a comprehensive taxonomy is introduced to classify existing algorithms based on different modules and parameters adopted, such as machine learning algorithms, feature extraction approaches, anomaly detection levels, computing platforms and application scenarios. To the best of the authors' knowledge, this is the first review article that discusses anomaly detection in building energy consumption. Moving forward, important findings along with domain-specific problems, difficulties and challenges that remain unresolved are thoroughly discussed, including the absence of: (i) precise definitions of anomalous power consumption, (ii) annotated datasets, (iii) unified metrics to assess the performance of existing solutions, (iv) platforms for reproducibility and (v) privacy-preservation. Following, insights about current research trends are discussed to widen the applications and effectiveness of the anomaly detection technology before deriving future directions attracting significant attention. This article serves as a comprehensive reference to understand the current technological progress in anomaly detection of energy consumption based on artificial intelligence.
- 18 August 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 19 (10) , 1769-1773
On 60 GHz MIMO Diversity in an Underground Mine Propagation Channel
This letter presents a set of 60 GHz MIMO channel measurements to investigates the diversity gain in an underground mine. A 2 2 MIMO propagation measurements were performed in line-of-sight (LOS) within an underground gold mine to investigate the frequency selectivity in the 57-64 GHz band. The measured coherence bandwidth and the excess delay were evaluated to determine the optimal subcarrier spacing and cyclic prefix (CP) length of multicarrier systems. A space time block coding (STBC) based on an orthogonal frequency division multiplexing (OFDM) scheme is then evaluated to determine the MIMO diversity gain. It is shown that the diversity gain through STBC enhances significantly links reliability in underground channels, and therefore the spectral efficiency and achievable data rates. The results and inferred conclusions are valuable in implementing the next generation 60 GHz IEEE802.11ay and the upcoming 5G new radio-unlicensed (NR-U) links in underground mines.
- 18 August 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 19 (10) , 1769-1773
On 60 GHz MIMO Diversity in an Underground Mine Propagation Channel
This letter presents a set of 60 GHz MIMO channel measurements to investigates the diversity gain in an underground mine. A 2 2 MIMO propagation measurements were performed in line-of-sight (LOS) within an underground gold mine to investigate the frequency selectivity in the 57-64 GHz band. The measured coherence bandwidth and the excess delay were evaluated to determine the optimal subcarrier spacing and cyclic prefix (CP) length of multicarrier systems. A space time block coding (STBC) based on an orthogonal frequency division multiplexing (OFDM) scheme is then evaluated to determine the MIMO diversity gain. It is shown that the diversity gain through STBC enhances significantly links reliability in underground channels, and therefore the spectral efficiency and achievable data rates. The results and inferred conclusions are valuable in implementing the next generation 60 GHz IEEE802.11ay and the upcoming 5G new radio-unlicensed (NR-U) links in underground mines.