Vitaliy V. Romaka
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Vitaliy V. Romaka has a total of 168 co-authors. Here are the top co-authors by number of shared publications:
P. Rogl
22 shared publicationsL. Romaka
Ivan Franko Lviv Natl Univ, Dept Inorgan Chem, Kyryl & Mephodiy Str 6, UA-79005 Lvov, Ukraine
18 shared publicationsYu. V. Stadnyk
Ivan Franko Lviv National University
17 shared publicationsV. V. Romaka
National University “Lvivska Politechnika
14 shared publicationsYu. Stadnyk
14 shared publicationsD. Fruchart
Institut Néel, CNRS, BP 166, 38042 Grenoble Cedex 9, France
13 shared publications
Latest Publications
- Open Access
- 30 September 2026
- Published by Institute of Thermoelectricity in Journal of Thermoelectricity
- No. 3,p. 5-18
Features of the Electrical Conductivity Mechanisms of the New Semiconductor Thermoelectric Material Hf1-xScxNiSn
The structural, thermodynamic, energetic, electrokinetic, and magnetic properties of the new semiconductor thermoelectric material Hf1-xScxNiSn, х=0–0.07, obtained by introducing Sc atoms into the structure of the HfNiSn compound by replacing Hf atoms, were investigated. The features of the transformation of the crystal and electronic structures, as well as the nature of the generated energy states and mechanisms of electrical conductivity, were established. Analysis of the electron density function based on Bader’s quantum theory for the HfNiSn and Hf0.75Sc0.25NiSn compounds confirmed the experimental conclusions regarding the generation in Hf1-xScxNiSn of structural defects of acceptor nature only and the corresponding energy states. High values of the specific electrical conductivity and the thermopower coefficient correspond to the condition of maximum efficiency of thermal-to-electrical energy conversion, making Hf1-xScxNiSn a promising thermoelectric material.
- 30 September 2026
- Published by Institute of Thermoelectricity in Journal of Thermoelectricity
- No. 3,p. 5-18
Open AccessFeatures of the Electrical Conductivity Mechanisms of the New Semiconductor Thermoelectric Material Hf1-xScxNiSn
The structural, thermodynamic, energetic, electrokinetic, and magnetic properties of the new semiconductor thermoelectric material Hf1-xScxNiSn, х=0–0.07, obtained by introducing Sc atoms into the structure of the HfNiSn compound by replacing Hf atoms, were investigated. The features of the transformation of the crystal and electronic structures, as well as the nature of the generated energy states and mechanisms of electrical conductivity, were established. Analysis of the electron density function based on Bader’s quantum theory for the HfNiSn and Hf0.75Sc0.25NiSn compounds confirmed the experimental conclusions regarding the generation in Hf1-xScxNiSn of structural defects of acceptor nature only and the corresponding energy states. High values of the specific electrical conductivity and the thermopower coefficient correspond to the condition of maximum efficiency of thermal-to-electrical energy conversion, making Hf1-xScxNiSn a promising thermoelectric material.
- Open Access
- 3 September 2026
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 16 (40) , 45877-45883
Experimental study and thermodynamic modelling of the Nb–Sb system
Thermodynamic modelling of the Nb–Sb system was performed by the CALPHAD method, based on SGTE data and on data from experimental studies in the literature combined with our new information obtained via DTA, EDX-EPMA, XPD and ab initio calculations.
- 3 September 2026
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 16 (40) , 45877-45883
Open AccessExperimental study and thermodynamic modelling of the Nb–Sb system
Thermodynamic modelling of the Nb–Sb system was performed by the CALPHAD method, based on SGTE data and on data from experimental studies in the literature combined with our new information obtained via DTA, EDX-EPMA, XPD and ab initio calculations.
- Open Access
- 23 August 2026
- Published by Wiley in Zeitschrift für anorganische und allgemeine Chemie
- Vol. 652 (17)
Bi[IrBi 6 I 12 ], Ag 3 [IrBi 6 I 12 ], and Bi x Cu 3–3 x [IrBi 6 I 12 ]: Rock‐Salt Superstructures Based on Heavy‐Atom Clusters
The bismuth‐rich subiodides Bi[IrBi 6 I 12 ], Ag 3 [IrBi 6 I 12 ], and Bi x Cu 3–3 x [IrBi 6 I 12 ] were synthesized by high‐temperature reactions in sealed silica ampules and characterized by powder and single‐crystal X‐ray diffraction, differential scanning calorimetry, energy‐dispersive X‐ray spectroscopy, and density functional theory (DFT) calculations. All three compounds contain cuboctahedral [IrBi 6 I 12 ] 3− cluster anions composed of an iridium‐centered bismuth octahedron with iodide‐bridged edges, but differ markedly in the occupation of the octahedral voids of the underlying rock‐salt‐related packing. In Bi[IrBi 6 I 12 ], the clusters are linked by Bi 3+ cations into infinite chains. Ag 3 [IrBi 6 I 12 ] adopts a rock‐salt‐related superstructure with a high degree of occupation of octahedral voids by Ag + and thus represents the most densely interconnected member of this cluster family known so far. At room temperature, the silver substructure is strongly disordered and gives rise to an ionic conductivity of 1.05 × 10 − 4 S cm −1 , whereas at 100 K a commensurately modulated fivefold superstructure reveals long‐range silver ordering. Attempts to prepare the corresponding copper compound “Cu 3 [IrBi 6 I 12 ]” were unsuccessful; instead, a phase with a homogeneity range, Bi x Cu 3–3 x [IrBi 6 I 12 ] with x ≥ 0.5, was obtained, in which Bi 3+ is replaced by Cu+ distributed over trigonal‐planar and tetrahedral sites in and around the corresponding octahedral voids. Electron‐counting considerations and DFT‐based bonding analyses consistently support an electron‐precise 18‐electron configuration for iridium in [IrBi 6 I 12 ] 3− . DFT calculations identify Bi[IrBi 6 I 12 ] and Ag 3 [IrBi 6 I 12 ] as narrow‐gap semiconductors.
- 23 August 2026
- Published by Wiley in Zeitschrift für anorganische und allgemeine Chemie
- Vol. 652 (17)
Open AccessBi[IrBi 6 I 12 ], Ag 3 [IrBi 6 I 12 ], and Bi x Cu 3–3 x [IrBi 6 I 12 ]: Rock‐Salt Superstructures Based on Heavy‐Atom Clusters
The bismuth‐rich subiodides Bi[IrBi 6 I 12 ], Ag 3 [IrBi 6 I 12 ], and Bi x Cu 3–3 x [IrBi 6 I 12 ] were synthesized by high‐temperature reactions in sealed silica ampules and characterized by powder and single‐crystal X‐ray diffraction, differential scanning calorimetry, energy‐dispersive X‐ray spectroscopy, and density functional theory (DFT) calculations. All three compounds contain cuboctahedral [IrBi 6 I 12 ] 3− cluster anions composed of an iridium‐centered bismuth octahedron with iodide‐bridged edges, but differ markedly in the occupation of the octahedral voids of the underlying rock‐salt‐related packing. In Bi[IrBi 6 I 12 ], the clusters are linked by Bi 3+ cations into infinite chains. Ag 3 [IrBi 6 I 12 ] adopts a rock‐salt‐related superstructure with a high degree of occupation of octahedral voids by Ag + and thus represents the most densely interconnected member of this cluster family known so far. At room temperature, the silver substructure is strongly disordered and gives rise to an ionic conductivity of 1.05 × 10 − 4 S cm −1 , whereas at 100 K a commensurately modulated fivefold superstructure reveals long‐range silver ordering. Attempts to prepare the corresponding copper compound “Cu 3 [IrBi 6 I 12 ]” were unsuccessful; instead, a phase with a homogeneity range, Bi x Cu 3–3 x [IrBi 6 I 12 ] with x ≥ 0.5, was obtained, in which Bi 3+ is replaced by Cu+ distributed over trigonal‐planar and tetrahedral sites in and around the corresponding octahedral voids. Electron‐counting considerations and DFT‐based bonding analyses consistently support an electron‐precise 18‐electron configuration for iridium in [IrBi 6 I 12 ] 3− . DFT calculations identify Bi[IrBi 6 I 12 ] and Ag 3 [IrBi 6 I 12 ] as narrow‐gap semiconductors.
- Open Access
- 30 June 2026
- Published by Institute of Thermoelectricity in Journal of Thermoelectricity
- No. 2,p. 47-57
Research on a New Semiconductor Thermoelectric Material n-Zr1-xNbxNiSn. II. Property Modeling
The electronic structure, thermodynamic, structural, energy, and electrokinetic properties of the semiconductor thermoelectric material Zr1-xNbxNiSn were modeled using density functional theory. The nature of the generated energy states and mechanisms of electrical conductivity were analyzed. It is shown that when Nb atoms are introduced into the structure of the ZrNiSn compound in varying ratios, two processes occur simultaneously: Zr atoms are substituted by Nb atoms, resulting in a substitutional solid solution, and Nb atoms also occupy the tetrahedral voids within the structure, leading to the formation of an inclusion solid solution. Structural changes create two types of donor defects in Zr1-xNbxNiSn, along with their corresponding energy states, which are essential for achieving maximum efficiency in converting thermal energy to electrical energy. Modeling of thermoelectric properties showed that the semiconductor solid solution of Zr1-xNbxNiSn is a promising thermoelectric material.
- 30 June 2026
- Published by Institute of Thermoelectricity in Journal of Thermoelectricity
- No. 2,p. 47-57
Open AccessResearch on a New Semiconductor Thermoelectric Material n-Zr1-xNbxNiSn. II. Property Modeling
The electronic structure, thermodynamic, structural, energy, and electrokinetic properties of the semiconductor thermoelectric material Zr1-xNbxNiSn were modeled using density functional theory. The nature of the generated energy states and mechanisms of electrical conductivity were analyzed. It is shown that when Nb atoms are introduced into the structure of the ZrNiSn compound in varying ratios, two processes occur simultaneously: Zr atoms are substituted by Nb atoms, resulting in a substitutional solid solution, and Nb atoms also occupy the tetrahedral voids within the structure, leading to the formation of an inclusion solid solution. Structural changes create two types of donor defects in Zr1-xNbxNiSn, along with their corresponding energy states, which are essential for achieving maximum efficiency in converting thermal energy to electrical energy. Modeling of thermoelectric properties showed that the semiconductor solid solution of Zr1-xNbxNiSn is a promising thermoelectric material.
- Open Access
- 14 June 2026
- Published by Wiley in Zeitschrift für anorganische und allgemeine Chemie
- Vol. 652 (12)
Ionothermal Synthesis of Cu(Sb 2 Se 3 )[AlCl 4 ] and Cu 5 (Bi 2 Se 3 ) 6 [AlCl 4 ] 5 : Monolayers of Sb 2 Se 3 and Bi 2 Se 3 Stabilized by Cu[AlCl 4 ]
Two new layered chalcogenide–chloridoaluminate compounds, Cu(Sb 2 Se 3 )[AlCl 4 ] and Cu 5 (Bi 2 Se 3 ) 6 [AlCl 4 ] 5 , were obtained by ionothermal synthesis from Lewis‐acidic [BMIm]Cl/AlCl 3 melts at 200°C. Single‐crystal X‐ray diffraction shows that Cu(Sb 2 Se 3 )[AlCl 4 ] contains corrugated Cu(Sb 2 Se 3 )] + layers in which an intrinsically two‐dimensional Sb 2 Se 3 net built from 12‐membered rings is cross‐linked by copper(I) atoms; [AlCl 4 ] − anions separate the cationic sheets and provide a weak CuCl coordination. Cu 5 (Bi 2 Se 3 ) 6 [AlCl 4 ] 5 features terraced Cu 3 (Bi 2 Se 3 ) 6 ] 3+ layers composed of Bi 2 Se 3 ] ribbons that are connected by copper(I) atoms. The interlayer region comprises [AlCl 4 ] − anions and [CuSeCl 3 ] tetrahedra. Density functional theory‐based bonding analyses indicate highly polar AlCl and CuCl interactions, more covalent CuSe bonding, and predominantly covalent SbSe and BiSe bonds. Electronic‐structure calculations yield indirect band gaps of about 1.35 eV for Cu(Sb 2 Se 3 )[AlCl 4 ] and 0.40 eV for Cu 5 (Bi 2 Se 3 ) 6 [AlCl 4 ] 5 . Optically allowed direct transitions at slightly higher energies account for the broad absorption observed in the UV/Vis spectra. Treatment with dilute HCl partially extracts the chloridoaluminate components and promotes splitting along the layers, producing flake‐like products, albeit with substantial loss of long‐range order.
- 14 June 2026
- Published by Wiley in Zeitschrift für anorganische und allgemeine Chemie
- Vol. 652 (12)
Open AccessIonothermal Synthesis of Cu(Sb 2 Se 3 )[AlCl 4 ] and Cu 5 (Bi 2 Se 3 ) 6 [AlCl 4 ] 5 : Monolayers of Sb 2 Se 3 and Bi 2 Se 3 Stabilized by Cu[AlCl 4 ]
Two new layered chalcogenide–chloridoaluminate compounds, Cu(Sb 2 Se 3 )[AlCl 4 ] and Cu 5 (Bi 2 Se 3 ) 6 [AlCl 4 ] 5 , were obtained by ionothermal synthesis from Lewis‐acidic [BMIm]Cl/AlCl 3 melts at 200°C. Single‐crystal X‐ray diffraction shows that Cu(Sb 2 Se 3 )[AlCl 4 ] contains corrugated Cu(Sb 2 Se 3 )] + layers in which an intrinsically two‐dimensional Sb 2 Se 3 net built from 12‐membered rings is cross‐linked by copper(I) atoms; [AlCl 4 ] − anions separate the cationic sheets and provide a weak CuCl coordination. Cu 5 (Bi 2 Se 3 ) 6 [AlCl 4 ] 5 features terraced Cu 3 (Bi 2 Se 3 ) 6 ] 3+ layers composed of Bi 2 Se 3 ] ribbons that are connected by copper(I) atoms. The interlayer region comprises [AlCl 4 ] − anions and [CuSeCl 3 ] tetrahedra. Density functional theory‐based bonding analyses indicate highly polar AlCl and CuCl interactions, more covalent CuSe bonding, and predominantly covalent SbSe and BiSe bonds. Electronic‐structure calculations yield indirect band gaps of about 1.35 eV for Cu(Sb 2 Se 3 )[AlCl 4 ] and 0.40 eV for Cu 5 (Bi 2 Se 3 ) 6 [AlCl 4 ] 5 . Optically allowed direct transitions at slightly higher energies account for the broad absorption observed in the UV/Vis spectra. Treatment with dilute HCl partially extracts the chloridoaluminate components and promotes splitting along the layers, producing flake‐like products, albeit with substantial loss of long‐range order.
- Open Access
- 11 May 2026
- Published by Wiley in Chemistry – A European Journal
- Vol. 32 (31) , e71106
Semiconducting Single‐Wall Antimony Oxide Nanotubes and Oxidotritelluridoantimonate(V) Anions
Black, needle‐shaped crystals of K 6 [Sb 12 O 18 ](SbOTe 3 ) 2 · n H 2 O ( n ≈ 5) were grown in high yield from an alkaline medium under hydrothermal conditions. Microporous, single‐walled [Sb 12 O 18 ] nanotubes dominate the hexagonal crystal structure of the cetineite‐type. Antimony(III) atoms form the outer and oxygen atoms the inner wall of the nanotube, making it radially dipolar, similar to a cylindrical capacitor. The inner wall is decorated with potassium cations, and water molecules fill the remaining internal volume of the nanotube. Stacks of the hitherto unknown oxidotritelluridoantimonate(V) anion, (SbOTe 3 ) 3− , fill the trigonal channels in the packing of the nanotubes. As with other modifications of Sb 2 O 3 , the filled bonding and empty antibonding states of the nanotubes are separated by a wide band gap of about 3.6 eV. In this energy gap, the molecular orbitals of the (SbOTe 3 ) 3− anions are located. Electronic excitation involves a charge transfer from the anions to the nanotubes, which are thereby heavily n‐doped and exhibit semiconducting behavior. Modification of the reaction conditions results in the crystallization of the tellurium‐rich cetineite K 6 [Sb 12 O 18 ](Te 3 ) 2 (Te 2 ) 3 ·5H 2 O or the cetineite K 18 [Sb 36 O 54 ](SbOTe 3 ) 2 (Te 2 ) 6 ·22H 2 O, which contains [Sb 36 O 54 ] nanotubes with an even wider diameter.
- 11 May 2026
- Published by Wiley in Chemistry – A European Journal
- Vol. 32 (31) , e71106
Open AccessSemiconducting Single‐Wall Antimony Oxide Nanotubes and Oxidotritelluridoantimonate(V) Anions
Black, needle‐shaped crystals of K 6 [Sb 12 O 18 ](SbOTe 3 ) 2 · n H 2 O ( n ≈ 5) were grown in high yield from an alkaline medium under hydrothermal conditions. Microporous, single‐walled [Sb 12 O 18 ] nanotubes dominate the hexagonal crystal structure of the cetineite‐type. Antimony(III) atoms form the outer and oxygen atoms the inner wall of the nanotube, making it radially dipolar, similar to a cylindrical capacitor. The inner wall is decorated with potassium cations, and water molecules fill the remaining internal volume of the nanotube. Stacks of the hitherto unknown oxidotritelluridoantimonate(V) anion, (SbOTe 3 ) 3− , fill the trigonal channels in the packing of the nanotubes. As with other modifications of Sb 2 O 3 , the filled bonding and empty antibonding states of the nanotubes are separated by a wide band gap of about 3.6 eV. In this energy gap, the molecular orbitals of the (SbOTe 3 ) 3− anions are located. Electronic excitation involves a charge transfer from the anions to the nanotubes, which are thereby heavily n‐doped and exhibit semiconducting behavior. Modification of the reaction conditions results in the crystallization of the tellurium‐rich cetineite K 6 [Sb 12 O 18 ](Te 3 ) 2 (Te 2 ) 3 ·5H 2 O or the cetineite K 18 [Sb 36 O 54 ](SbOTe 3 ) 2 (Te 2 ) 6 ·22H 2 O, which contains [Sb 36 O 54 ] nanotubes with an even wider diameter.
- Open Access
- 31 March 2025
- Published by Institute of Thermoelectricity in Journal of Thermoelectricity
- No. 1,p. 5-15
Research of Thermoelectric Material Ti1-xNbxNiSn
The structural, kinetic, energetic, and magnetic properties of the semiconductor thermoelectric material Ti1-xNbxNiSn, obtained by doping n-TiNiSn with Nb atoms, have been studied. It has been shown that Nb atoms (4d45s1) simultaneously occupy different crystallographic positions, generating structural defects of donor and acceptor nature. At Ti1-xNbxNiSn concentrations, х=0–0.04, Nb atoms predominantly replace Ti (3d24s2) and Ni (3d84s2) atoms present there in position 4a, generating donor and acceptor states in the band gap εg, respectively. At higher concentrations, х˃0.04, Nb atoms replace only Ti atoms, generating structural defects and energetic states of donor nature. It is shown that the semiconducting solid solution Ti1-xNbxNiSn is a promising thermoelectric material, and at T≈650 K and Ti0.99Nb0.01NiSn concentration ZT is equal to 0.76. The studies allowed us to identify the mechanisms of electrical conductivity to determine the conditions for the synthesis of thermoelectric materials Ti1-xNbxNiSn with maximum efficiency of converting thermal energy into electrical energy.
- 31 March 2025
- Published by Institute of Thermoelectricity in Journal of Thermoelectricity
- No. 1,p. 5-15
Open AccessResearch of Thermoelectric Material Ti1-xNbxNiSn
The structural, kinetic, energetic, and magnetic properties of the semiconductor thermoelectric material Ti1-xNbxNiSn, obtained by doping n-TiNiSn with Nb atoms, have been studied. It has been shown that Nb atoms (4d45s1) simultaneously occupy different crystallographic positions, generating structural defects of donor and acceptor nature. At Ti1-xNbxNiSn concentrations, х=0–0.04, Nb atoms predominantly replace Ti (3d24s2) and Ni (3d84s2) atoms present there in position 4a, generating donor and acceptor states in the band gap εg, respectively. At higher concentrations, х˃0.04, Nb atoms replace only Ti atoms, generating structural defects and energetic states of donor nature. It is shown that the semiconducting solid solution Ti1-xNbxNiSn is a promising thermoelectric material, and at T≈650 K and Ti0.99Nb0.01NiSn concentration ZT is equal to 0.76. The studies allowed us to identify the mechanisms of electrical conductivity to determine the conditions for the synthesis of thermoelectric materials Ti1-xNbxNiSn with maximum efficiency of converting thermal energy into electrical energy.
- Open Access
- 21 March 2025
- Published by Wiley in Zeitschrift für anorganische und allgemeine Chemie
- Vol. 651 (8)
Dynamic Bismuth Clusters in an Ionic Conducting Copper Iodide Matrix
Black, apparently air‐stable crystals of (Bi9)[Cu8I13], is grown by reacting Bi, Cu, and BiI3 in an evacuated, sealed silica ampoule. At room temperature, the structure exhibits eight formula units of largely disordered (Bi9)5+ polycations, which appear as hollow spheres of inhomogeneously distributed electron density on a temporal and spatial average. The clusters are embedded in a disordered 3D framework of iodidocuprate(I) tetrahedra. The structure adopts the centrosymmetric space group Fmc and can be described as a filling variant of the NaZn13 structure type with Cu+ cations distributed across the numerous tetrahedral voids. At 100 K, the crystal structure is fully ordered and adopts the noncentrosymmetric, monoclinic space group Cc with pseudocubic metrics. The (Bi9)5+ cluster has the rarely observed shape of a capped square antiprism. The disorder in the [Cu8I13]5− part indicates mobility of the copper(I) cations. Impedance measurements reveal poor electronic conductivity and a weak ionic conductivity of 5 × 10−5 S cm−1 at room temperature. The electronic band structure shows a wide gap between the bonding and antibonding states of the [Cu8I13]5− framework, in which molecular states of the bismuth polycations are located, reducing the bandgap to about 0.80 eV.
- 21 March 2025
- Published by Wiley in Zeitschrift für anorganische und allgemeine Chemie
- Vol. 651 (8)
Open AccessDynamic Bismuth Clusters in an Ionic Conducting Copper Iodide Matrix
Black, apparently air‐stable crystals of (Bi9)[Cu8I13], is grown by reacting Bi, Cu, and BiI3 in an evacuated, sealed silica ampoule. At room temperature, the structure exhibits eight formula units of largely disordered (Bi9)5+ polycations, which appear as hollow spheres of inhomogeneously distributed electron density on a temporal and spatial average. The clusters are embedded in a disordered 3D framework of iodidocuprate(I) tetrahedra. The structure adopts the centrosymmetric space group Fmc and can be described as a filling variant of the NaZn13 structure type with Cu+ cations distributed across the numerous tetrahedral voids. At 100 K, the crystal structure is fully ordered and adopts the noncentrosymmetric, monoclinic space group Cc with pseudocubic metrics. The (Bi9)5+ cluster has the rarely observed shape of a capped square antiprism. The disorder in the [Cu8I13]5− part indicates mobility of the copper(I) cations. Impedance measurements reveal poor electronic conductivity and a weak ionic conductivity of 5 × 10−5 S cm−1 at room temperature. The electronic band structure shows a wide gap between the bonding and antibonding states of the [Cu8I13]5− framework, in which molecular states of the bismuth polycations are located, reducing the bandgap to about 0.80 eV.
- 1 January 2025
- Published by Lviv Polytechnic National University
New thermoelectric materials based on half-Husler phases
The results of research on a new class of thermoelectric materials with high efficiency of converting thermal energy into electrical energy, obtained by doping semi-Heusler semiconductor phases TiNiSn, ZrNiSn, HfNiSn, TiCoSb, VFeSb, ZrCoSb and RNiSb (R is a rare earth metal) with acceptor and/or donor impurities are presented, which allows controlling the position of the Fermi level, changing the values of electrical resistance, thermopower coefficients and thermal conductivity. The study of structural, thermodynamic, electrokinetic, energy and magnetic properties of thermoelectric materials made it possible to establish the features of transformations of their crystal and electronic structures, mechanisms of electrical conductivity. Physical principles for optimizing the properties of semi-Heusler phases to obtain maximum values of thermoelectric figure of merit are formulated and implemented. In particular, an algorithm for controlling the properties of thermoelectric materials has been developed by modeling them using the KKR methods (AkaiKKR package for the MJW potential) and FLAPW within the framework of the density functional theory DFT (Vienna Ab initio Simulation Package VASP v. 5.4.4) and cyclic correction of the initial conditions of calculations with the parameters of experimental measurements. For researchers, postgraduates and students of the specialties of metrology and information and measurement technology, materials science, micro- and nanosystem technology, applied physics and nanomaterials.
- 1 January 2025
- Published by Lviv Polytechnic National University
New thermoelectric materials based on half-Husler phases
The results of research on a new class of thermoelectric materials with high efficiency of converting thermal energy into electrical energy, obtained by doping semi-Heusler semiconductor phases TiNiSn, ZrNiSn, HfNiSn, TiCoSb, VFeSb, ZrCoSb and RNiSb (R is a rare earth metal) with acceptor and/or donor impurities are presented, which allows controlling the position of the Fermi level, changing the values of electrical resistance, thermopower coefficients and thermal conductivity. The study of structural, thermodynamic, electrokinetic, energy and magnetic properties of thermoelectric materials made it possible to establish the features of transformations of their crystal and electronic structures, mechanisms of electrical conductivity. Physical principles for optimizing the properties of semi-Heusler phases to obtain maximum values of thermoelectric figure of merit are formulated and implemented. In particular, an algorithm for controlling the properties of thermoelectric materials has been developed by modeling them using the KKR methods (AkaiKKR package for the MJW potential) and FLAPW within the framework of the density functional theory DFT (Vienna Ab initio Simulation Package VASP v. 5.4.4) and cyclic correction of the initial conditions of calculations with the parameters of experimental measurements. For researchers, postgraduates and students of the specialties of metrology and information and measurement technology, materials science, micro- and nanosystem technology, applied physics and nanomaterials.