BTBobo Tian

Bobo Tian

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Bobo Tian has a total of 387 co-authors. Here are the top co-authors by number of shared publications:

  • Junhao Chu

    Key Laboratory of Polar Materials and Devices, Ministry of Education, Shanghai Center of Brain-inspired Intelligent Materials and Devices, Department of Electronics, East China Normal University , Shanghai 200241

    30 shared publications
  • Guangdi Feng

    Key Laboratory of Polar Materials and Devices, Ministry of Education, Shanghai Center of Brain-inspired Intelligent Materials and Devices, Department of Electronics, East China Normal University , Shanghai 200241

    26 shared publications
  • Chungang Duan

    Key Laboratory of Polar Materials and Devices, Ministry of Education, Shanghai Center of Brain-inspired Intelligent Materials and Devices, Department of Electronics, East China Normal University , Shanghai 200241

    24 shared publications
  • Chun-Gang Duan

    East China Normal University

    23 shared publications
  • Qiuxiang Zhu

    Key Laboratory of Polar Materials and Devices (MOE) Department of Electronics School of Information and Electronic Engineering East China Normal University Shanghai China

    15 shared publications
  • Hui Peng

    East China Normal University

    13 shared publications

Latest Publications

  • Open Access

    Low-power Charge-domain In-FeRAM Computing

    by Yalong Zhang, Gaoyuan Guo, Zhenyu Jiang, Xiaoming Zhao, Kexin Hao, Mengcan Tian, Xiaoyue Huang, Xu Zhang, Guangdi Feng, Chungang Duan, et al.

    The growing energy demands of large-scale model training and scientific computing have inspired interest in low-power computing paradigms. In-memory computing (IMC) reduces data movement overheads, but resistive devices suffer from high static power and Joule-heating. Here, we introduce a charge-domain computing paradigm based on Hf0.5Zr0.5O2 ferroelectric random-access memory (HZO FeRAM), in which computation is enabled by linear accumulation of charge associated with the anti-orientated ferroelectric polarization. We experimentally demonstrate this concept using a 16-kbit HZO FeRAM array, where key computational characteristics execute directly within this array, gradient calculations are performed with errors below 6×10 − 3, and in-memory difference operations solve partial differential equations with 98% accuracy after only 21 iterations. Hybrid FeRAM-digital training of a single-layer neural network for letter recognition is also shown. Furthermore, a 1 μm2 HZO ferroelectric capacitor exhibits a measured switching energy of only 1.66×10 − 12 J, implying the potential of HZO FeRAM for energy-efficient charge-domain computing.

  • III-nitride-based in-sensor computing enabled by interfacial polarization effects

    by Ke Jiang, Bingxiang Wang, Xiaojuan Sun, Jiaxin Liu, Guangdi Feng, Shikun Duan, Peiran Tong, Tong Fang, Shanli Zhang, Jianquan Liu, et al.

    In-sensor computing enables real-time and intelligent analysis with superior energy efficiency. However, existing oxide-based or 2D-ferroelectric-based in-sensor computing devices suffer from severe response loss and challenges in large-scale fabrication. Here a III-nitride-based in-sensing computing device is proposed by exploiting its intrinsic polarization effects in their heterostructures. The polarization-induced spatial separation of photogenerated carriers and the defect-free nature of bipolar polarization interfaces effectively avoid carrier recombination losses, enabling high light sensitivity level of nanowatt per square centimetre, responsivity level of 106 A W−1 and on/off ratio level of 105 in the sensor-memristor mode. Additionally, controlled applied bias allows the sensor-memristor to transform into a high-speed detector. These results establish a viable design principle that utilizes interfacial-electrostatics-induced photocarrier spatial separation and asymmetric-barriers-modulated carrier transport to realize in-sensor computing. Moreover, the high-temperature resistance of III-nitrides allows the device to maintain high performance at temperatures up to 300 °C. This approach aligns with industrial-scale III-nitride manufacturing and complementary metal–oxide–semiconductor integration, probably advancing the feasibility of in-sensor computing architectures.

  • Open Access

    Lattice Disorder in CuI Enables Filament‐Free Transparent Memristors

    by Yuzhao Ouyang, Ke Qu, Haonan Wang, Jianquan Liu, Wei Li, Zhuoran Ji, Jialin Yang, Qiuxiang Zhu, Zhenzhong Yang, Xiaodong Tang, et al.

    The realization of invisible neuromorphic electronics hinges on transparent memories that reconcile high optical transparency with stable analog tunability, which is a challenge unmet by conventional filamentary devices. Here, we introduce an alloyed Cu 1‐ x Ag x I halide transparent semiconductor with dual ionic‐electronic character, which enables a filament‐free switching platform. Ag + incorporation induces lattice distortions within the γ‐phase CuI matrix, expanding interstitial channels and lowering the migration barrier without phase transition. This activates room‐temperature ion migration to dynamically modulate the p‐type hole conductance. Asymmetric electrodes induce spatially distributed ion migration and interfacial modulation, avoiding localized metallic percolation. In situ TEM and EDS mapping confirm reversible Cu + /Ag + redistribution without continuous conductive pathways. Pt/Cu 1‐ x Ag x I/Ag devices exhibit > 80% transparency, low‐voltage readout, and > 2‐year retention. They emulate synaptic plasticity and achieve high‐accuracy handwritten digit recognition. Our findings establish a design strategy for transparent memristors, enabling reliable neuromorphic hardware via ionically mediated electronic transport.

  • Open Access

    Overcoming polarization-breakdown trade-off via hydrogen bonding-modulated molecular stacking in high-temperature high-energy-density flexible dielectric

    by Minhao Yang, Haoran Sun, Junjie Wang, Shufan Yu, Zhongjun Zhou, Shiang Zhao, Huarui Yan, Jiajun Qu, Jun Liu, Bobo Tian, et al.

    Flexible dielectrics suffer from an inherent polarization-breakdown trade-off. Herein, we propose a hydrogen bonding-modulated molecular stacking strategy to improve high-temperature capacitive energy storage performance. A series of polyetherimide copolymers with tunable hydrogen bond donors and acceptors was synthesized. Highly polarizable hydroxyl groups boost dielectric constant and increase hydrogen bond donor density. The constructed hydrogen bonding network strengthens intermolecular interactions, thermal stability, and breakdown strength. Bulky trifluoromethyl substituents enlarge interchain spacing and suppress interchain charge transport. Ultimately, the copolymer with optimal molecular stacking delivers a maximum discharged energy density of 7.34 J/cm3 with efficiency exceeding 90% at 680 MV/m and 200 °C, representing a 395.95% improvement over the pristine film and outperforming most reported flexible dielectrics. This intrinsic molecular modulation route offers a facile design strategy for designing high-temperature high-energy-density flexible dielectrics.

  • Open Access

    Dual-function floating-gate memory driver for energy-efficient integrated display–illumination system

    by Haifeng Wu, Yizhe Wang, Qijun Zong, Jiali Yi, Huawei Liu, Xingxia Sun, Qin Shuai, Jian Hu, Xiao Lin, Yazhou Wang, et al.

    The increasing demand for multifunctional micro-displays capable of both high-brightness illumination and low-power image display highlights a critical bottleneck in existing display technologies, which struggle to efficiently switching between large-area uniform light output and fine-grained pixel-level control. Here, we introduce the Integrated Nonvolatile Display–Illumination System (INDIS)—a monolithically integrated Micro-LED architecture based on transparent indium tin oxide (ITO) floating-gate memory (FGM) devices, achieving dual-mode operation. Pixel-level addressing is realized with only a single FGM per pixel and an independent gate controller, enabling the programmed image pattern to be retained without continuous refresh. To support lighting functionality, INDIS adopts a matrix circuit with shared drain electrodes acting as a common anode port, allowing the entire Micro-LED array to be simultaneously activated for large-area illumination. By unifying memory and emission functions within a compact architecture, INDIS achieves display–illumination fusion, offering a scalable and energy-efficient solution for next-generation multifunctional micro-display applications.

  • (Anti)ferroelectricity Induced Dual-Breathing Mode in Bulk Kagome Semiconductor Nb3I8

    by Jin Hong, Haonan Wang, Fengrui Sui, Kai-Qi Wang, Xin Han, Yufan Zheng, Wen-Yi Tong, Xing Deng, Zhao Guan, Bobo Tian, et al.

    The kagome lattice has long been a subject of fascination for physicists due to its rich physics, encompassing phenomena such as superconductivity, charge density waves, and flat bands. In this work, we report the discovery of a novel ferroelectricity-induced dual-breathing mode in the kagome semiconductor Nb3I8. This dual-breathing mode involves both intralayer and interlayer breathing motions that are driven by the polarization within the layers. We demonstrate that, both theoretically and experimentally, such a breathing pattern will disappear in the absence of ferroelectric polarization in each layer. This discovery not only broadens our understanding of complex interactions within kagome lattices but also paves the way for the development of new types of electronic devices based on ferroelectricity.

  • Open Access

    Ferroelectric‐Enabled Dual‐Gate WSe 2 Transistors for Non‐volatile and Reconfigurable Circuits

    by Zhenyu Feng, Wei Li, Yu Xu, Cuijie Qin, Xiaoyue Huang, Shenglan Hao, Jing Yang, Guangdi Feng, Chungang Duan, Junhao Chu, et al.

    Reconfigurable transistors integrating memory and logic functions are promising for beyond‐von‐Neumann computing, yet existing architectures often suffer from limited operational flexibility and coupled programming/readout mechanisms. Here, a ferroelectric‐enabled dual‐gate WSe 2 ambipolar transistor is demonstrated using a ferroelectric P(VDF‐TrFE) top gate and a conventional back gate to achieve decoupled non‐volatile polarity programming and volatile logic operation. The ambipolar WSe 2 channel can be reversibly configured into stable n‐type or p‐type states, enabling symmetric dual‐mode multi‐state memory with an ON/OFF ratio up to 10 7 , switching speed down to 500 ns, energy consumption of 0.2 fJ, and endurance exceeding 10 7 cycles. Leveraging the intrinsic polarity reconfigurability, multiple Boolean logic gates and a compact 1‐bit content‐addressable memory (CAM) cell are implemented within a single transistor. In addition, a programmable complementary inverter with tunable switching thresholds enables multi‐state voltage encoding for enhanced neuromorphic vision processing. This work provides a versatile platform for multifunctional, energy‐efficient, and adaptive in‐memory computing systems.

  • Open Access

    Gate‐Reconfigurable Multifunctional Photodetection Through Realigning Energy Band

    by Dongyu Chen, Muhammad Zubair, Wei Li, Junding Zheng, Yu Xu, Yangyang Wang, Yannan Dai, Tangxin Li, Shengwen Luo, Guangdi Feng, et al.

    Integrating multiple optoelectronic functions into a single photodetector is highly desirable for next‐generation intelligent optoelectronics, yet remains challenging due to the reliance on complex device architectures and elaborate material engineering. Here, we demonstrate that realignment of the energy band‐induced electric field enables a simple type‑II van der Waals heterojunction composed of indium selenide and black phosphorus (InSe/BP) to realize gate‐reconfigurable bipolar photovoltaic and adaptive photoconductive operation. Under negative gate bias, electrostatic band reshaping drives a transition from type‑II to type‐I alignment while significantly enhancing the built‐in electric field at the InSe/BP interface, leading to a strong positive photovoltaic performance and effective suppression of dark current, with a photocurrent on/off ratio exceeding 10 5 . Conversely, a positive gate voltage restores the type‑II band alignment, yielding a negative photovoltaic response while simultaneously activating a high‐gain photoconductive regime. Beyond bipolar photovoltaic operation, an essential functionality for in‐sensor computing, the gate tunable‐adaptive photoconductive mode enables high‐contrast imaging across both bright and dim illumination conditions. This work establishes energy‐band realignment as a powerful and scalable strategy for multifunctional, gate‐reconfigurable photodetection, offering a promising platform for intelligent imaging and adaptive vision systems.

  • Open Access

    Surface energy-driven perpendicular gradient structure in flexible composite dielectrics for high-temperature capacitive energy storage

    by Minhao Yang, Huarui Yan, Shiang Zhao, Yanlong Zhao, Haoran Sun, Zhongjun Zhou, Jiajun Qu, Zhenyu Jia, Zhenzhong Yang, Jun Liu, et al.

    Flexible dielectrics are urgently needed in advanced electrical systems and modern power electronics. Nevertheless, conventional polymer dielectrics suffer from low discharged energy density and charge-discharge efficiency at elevated temperatures due to severe conduction loss. Here, we report a perpendicular gradient structured polymer composite dielectric with an inorganic hybrid crosslinking network of Si-O-Ti. Driven by surface energy difference, SiO2 accumulates on the film surface to block the charge injection, while bulk TiO2 boosts the dielectric constant. The hybrid crosslinking network of Si-O-Ti also enhances the thermal stability, mechanical modulus and insulation strength by reducing free volume. Ultimately, the obtained composite delivers a discharged energy density of 6.04 J/cm3 above 90% efficiency at 200 °C, exhibiting a 364.62% enhancement over the pristine polymer. This strategy effectively modulates surface and bulk properties, accordingly contributing to improving high-temperature capacitive energy storage performance.