Tao Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Tao Liu has a total of 100 co-authors. Here are the top co-authors by number of shared publications:
- Luke A. McGuire
Department of Geosciences University of Arizona Tucson AZ USA
6 shared publications Lin Ji
Department of Hydrology and Atmospheric Sciences University of Arizona Tucson Arizona USA
5 shared publications- Ann M. Youberg
The University of Arizona Arizona Geological Survey Tucson AZ USA
4 shared publications - Alexander N. Gorr
U.S. Geological Survey, Geologic Hazards Science Center, Golden, CO, USA
3 shared publications Jiangli Pang
School of Geography and Tourism, Shaanxi Normal University, Xi'an, Shaanxi 710119, PR China
3 shared publicationsXiaochun Zha
School of Geography and Tourism, Shaanxi Normal University, Xi'an, Shaanxi 710119, PR China
3 shared publications
Latest Publications
- Open Access
- 29 May 2026
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Earth Surface
- Vol. 131 (6)
Predictive Models for Postfire Debris Flow Initiation in the Southwest USA
Postfire debris flows pose a threat to life and infrastructure and significantly contribute to sediment supply in upland channels, thereby impacting water quality, stream habitats, and landscape evolution. Models designed to assess postfire debris‐flow likelihood at the watershed scale in response to design or forecast rainstorms are beneficial for identifying and mitigating postfire debris‐flow hazards, and for modeling the long‐term evolution of steep, fire‐prone landscapes. This study used four machine learning (ML) algorithms, logistic regression, linear discriminant analysis, random forest, and XGBoost, to develop classification models for postfire debris‐flow likelihood at the watershed scale. We compile a new data set of postfire debris‐flow observations from the Southwest USA, specifically from Arizona and New Mexico. The data set includes information related to hydrogeomorphic response (i.e., debris flow or no debris flow) for 3,107 rainfall events that occurred within the first year following fire across 200 watersheds. We use these data to develop two logistic regression models, based on rainfall, terrain, and fire severity metrics, that can provide spatially explicit predictions of debris‐flow likelihood across burned landscapes. Both models use two features that combine peak 15‐min rainfall accumulation with mean watershed slope and a fire severity metric. All four ML algorithms produced models with threat scores ranging from 0.37 to 0.41 when trained using these features, with logistic regression achieving the highest threat score. Results improve our ability to assess postfire debris‐flow hazards in the Southwest USA and provide insight into how rainfall, terrain, and fire severity influence postfire debris‐flow initiation.
- 29 May 2026
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Earth Surface
- Vol. 131 (6)
Open AccessPredictive Models for Postfire Debris Flow Initiation in the Southwest USA
Postfire debris flows pose a threat to life and infrastructure and significantly contribute to sediment supply in upland channels, thereby impacting water quality, stream habitats, and landscape evolution. Models designed to assess postfire debris‐flow likelihood at the watershed scale in response to design or forecast rainstorms are beneficial for identifying and mitigating postfire debris‐flow hazards, and for modeling the long‐term evolution of steep, fire‐prone landscapes. This study used four machine learning (ML) algorithms, logistic regression, linear discriminant analysis, random forest, and XGBoost, to develop classification models for postfire debris‐flow likelihood at the watershed scale. We compile a new data set of postfire debris‐flow observations from the Southwest USA, specifically from Arizona and New Mexico. The data set includes information related to hydrogeomorphic response (i.e., debris flow or no debris flow) for 3,107 rainfall events that occurred within the first year following fire across 200 watersheds. We use these data to develop two logistic regression models, based on rainfall, terrain, and fire severity metrics, that can provide spatially explicit predictions of debris‐flow likelihood across burned landscapes. Both models use two features that combine peak 15‐min rainfall accumulation with mean watershed slope and a fire severity metric. All four ML algorithms produced models with threat scores ranging from 0.37 to 0.41 when trained using these features, with logistic regression achieving the highest threat score. Results improve our ability to assess postfire debris‐flow hazards in the Southwest USA and provide insight into how rainfall, terrain, and fire severity influence postfire debris‐flow initiation.
- Open Access
- 12 June 2024
- Published by American Geophysical Union (AGU) in Earth's Future
- Vol. 12 (6)
A Prefire Approach for Probabilistic Assessments of Postfire Debris‐Flow Inundation
Increases in wildfire activity and rainfall intensification are driving more postfire debris flows (PFDF) in many regions around the world. PFDFs are most common in the first postfire year and may even occur before a fire is fully controlled. This underscores the importance of assessing postfire hazards before a fire starts. Evaluation of PFDF hazards prior to fire can help strategize interventions lessening the negative effects of future fires. However, debris‐flow runout and inundation analyses are not routine in PFDF hazard assessments, partially due to time constraints and substantial uncertainties in boundary conditions. Here, we propose a prefire PFDF inundation assessment framework using a debris‐flow runout model based on the Herschel‐Bulkley (HB) rheology (HEC‐RAS v6.1). We constrain model inputs and parameters using Bayesian posterior analysis, rainfall‐runoff simulations, and a debris‐flow volume model. We use observations from recent PFDF incidents in northern Arizona, USA, to calibrate model components and then apply our prefire inundation assessment framework in a nearby unburned area. Specifically, we (a) identify yield stress as the most influential factor on inundation extent and arrival time in a HB model, (b) establish posterior distributions for model parameters suitable for forward modeling by leveraging uncertainties in field observations, and (c) implement a predictive forward analysis in an area that has not burned recently to evaluate PFDF inundation under several future fire scenarios. This study improves our ability to assess postfire debris‐flow hazards before a fire begins and provides guidance for future applications of single‐phase rheological models when assessing PFDF hazards.
- 12 June 2024
- Published by American Geophysical Union (AGU) in Earth's Future
- Vol. 12 (6)
Open AccessA Prefire Approach for Probabilistic Assessments of Postfire Debris‐Flow Inundation
Increases in wildfire activity and rainfall intensification are driving more postfire debris flows (PFDF) in many regions around the world. PFDFs are most common in the first postfire year and may even occur before a fire is fully controlled. This underscores the importance of assessing postfire hazards before a fire starts. Evaluation of PFDF hazards prior to fire can help strategize interventions lessening the negative effects of future fires. However, debris‐flow runout and inundation analyses are not routine in PFDF hazard assessments, partially due to time constraints and substantial uncertainties in boundary conditions. Here, we propose a prefire PFDF inundation assessment framework using a debris‐flow runout model based on the Herschel‐Bulkley (HB) rheology (HEC‐RAS v6.1). We constrain model inputs and parameters using Bayesian posterior analysis, rainfall‐runoff simulations, and a debris‐flow volume model. We use observations from recent PFDF incidents in northern Arizona, USA, to calibrate model components and then apply our prefire inundation assessment framework in a nearby unburned area. Specifically, we (a) identify yield stress as the most influential factor on inundation extent and arrival time in a HB model, (b) establish posterior distributions for model parameters suitable for forward modeling by leveraging uncertainties in field observations, and (c) implement a predictive forward analysis in an area that has not burned recently to evaluate PFDF inundation under several future fire scenarios. This study improves our ability to assess postfire debris‐flow hazards before a fire begins and provides guidance for future applications of single‐phase rheological models when assessing PFDF hazards.
- Open Access
- 13 May 2024
- Published by Office of Scientific and Technical Information (OSTI)
A Prefire Approach for Probabilistic Assessments of Postfire Debris-Flow Inundation
The U.S. Department of Energy's Office of Scientific and Technical Information
- 13 May 2024
- Published by Office of Scientific and Technical Information (OSTI)
Open AccessA Prefire Approach for Probabilistic Assessments of Postfire Debris-Flow Inundation
The U.S. Department of Energy's Office of Scientific and Technical Information
- Open Access
- 21 December 2023
- Published by American Geophysical Union (AGU) in Water Resources Research
- Vol. 59 (12)
Process‐Based Quantification of the Role of Wildfire in Shaping Flood Frequency
Moderate to high severity wildfire can abruptly alter watershed properties and enhance extreme hydrologic responses such as debris flows and floods. The compounding effects of wildfire on flood hazard, represented here via flood frequency analysis (FFA; e.g., 100‐year flood) are of growing importance. Standard statistical FFA approaches are ill‐suited to examining this issue because wildfire‐affected flood peak observations are limited in number and violate the assumption of independent and identically distributed events. Here, we developed a process‐based FFA framework that integrates a stochastic rainfall generator, wildfire simulation, inverse modeling, and a physics‐based hydrological model to directly simulate the impacts of wildfire on FFA. We applied this framework in the upper Arroyo Seco watershed in Southern California, which experienced Moderate to high burn during the 2009 Station Fire. An FFA analysis, performed with simulated peak flows from the first year since fire demonstrates the 100‐year flood can be three times larger than simulations that only consider peak flows in non‐fire‐affected years. On the other hand, coupling process‐based FFA with stochastically simulated wildfire events and watershed's time‐varying hydrologic recovery yields “fire continuum FFA”, a concept introduced here for the first time. Fire continuum FFA accounts for multiple wildfires within very long synthetic time series. Variability in upper tail flood peaks is substantially higher in fire continuum results as compared with pre‐wildfire FFA. This result highlights the importance of wildfire inter‐arrival time and post‐wildfire recovery processes, both of which are expected to change as a result of climatic change and evolving fire management strategies.
- 21 December 2023
- Published by American Geophysical Union (AGU) in Water Resources Research
- Vol. 59 (12)
Open AccessProcess‐Based Quantification of the Role of Wildfire in Shaping Flood Frequency
Moderate to high severity wildfire can abruptly alter watershed properties and enhance extreme hydrologic responses such as debris flows and floods. The compounding effects of wildfire on flood hazard, represented here via flood frequency analysis (FFA; e.g., 100‐year flood) are of growing importance. Standard statistical FFA approaches are ill‐suited to examining this issue because wildfire‐affected flood peak observations are limited in number and violate the assumption of independent and identically distributed events. Here, we developed a process‐based FFA framework that integrates a stochastic rainfall generator, wildfire simulation, inverse modeling, and a physics‐based hydrological model to directly simulate the impacts of wildfire on FFA. We applied this framework in the upper Arroyo Seco watershed in Southern California, which experienced Moderate to high burn during the 2009 Station Fire. An FFA analysis, performed with simulated peak flows from the first year since fire demonstrates the 100‐year flood can be three times larger than simulations that only consider peak flows in non‐fire‐affected years. On the other hand, coupling process‐based FFA with stochastically simulated wildfire events and watershed's time‐varying hydrologic recovery yields “fire continuum FFA”, a concept introduced here for the first time. Fire continuum FFA accounts for multiple wildfires within very long synthetic time series. Variability in upper tail flood peaks is substantially higher in fire continuum results as compared with pre‐wildfire FFA. This result highlights the importance of wildfire inter‐arrival time and post‐wildfire recovery processes, both of which are expected to change as a result of climatic change and evolving fire management strategies.
- 5 December 2023
- Published by Elsevier in Quaternary Science Reviews
- Vol. 324
Sedimentary records of megafloods in the Yarlung Tsangpo Gorge in the eastern Himalaya since the Last Glacial Period
- 5 December 2023
- Published by Elsevier in Quaternary Science Reviews
- Vol. 324
Sedimentary records of megafloods in the Yarlung Tsangpo Gorge in the eastern Himalaya since the Last Glacial Period
- 16 October 2023
- Published by Wiley in Earth Surface Processes and Landforms
- Vol. 49 (2) , 622-641
Inundation and flow properties of a runoff‐generated debris flow following successive high‐severity wildfires in northern Arizona, USA
Burned slopes are susceptible to runoff‐generated debris flows in the years following wildfire due to reductions in vegetation cover and soil infiltration capacity. Debris flows can pose serious threats to downstream communities, so quantifying variations in flow properties along debris‐flow runout paths is needed to improve both conceptual and quantitative models of debris‐flow behaviour to help anticipate and mitigate the risk associated with these events. Changes in flow properties along the runout paths of the runoff‐generated debris flows that follow fire may be particularly dramatic, since they initiate when a water‐dominated flow rapidly entrains sediment and later transition back to a water‐dominated flow once they reach greater drainage areas and lower slopes. Here, we study the properties of a debris flow that initiated 1 month following the 2022 Pipeline Fire in northern Arizona, USA. We categorized flow type into two classes, granular debris flow and muddy debris flow, along the 7‐km runout path and examined how flow properties varied between the phases. Changes in channel gradient and confinement likely facilitated the transition between the flow phases, which were characterized by significant differences in maximum clast size, but similar clay content and fine fractions. We also found that the volume and runout distance of the debris flow were 28 and six times greater, respectively, than that of a debris flow that initiated in the same watershed following a fire 12 years earlier. We attribute these differences to the combined effects of two high‐severity fires, suggesting that consideration of recent fire history could improve post‐fire debris‐flow hazard assessments. Results of this study provide quantitative constraints on changes in post‐fire debris‐flow properties along a runout path. Data collected in this study add to a small number of debris‐flow inundation datasets that can be used to test runout models in post‐fire settings.
- 16 October 2023
- Published by Wiley in Earth Surface Processes and Landforms
- Vol. 49 (2) , 622-641
Inundation and flow properties of a runoff‐generated debris flow following successive high‐severity wildfires in northern Arizona, USA
Burned slopes are susceptible to runoff‐generated debris flows in the years following wildfire due to reductions in vegetation cover and soil infiltration capacity. Debris flows can pose serious threats to downstream communities, so quantifying variations in flow properties along debris‐flow runout paths is needed to improve both conceptual and quantitative models of debris‐flow behaviour to help anticipate and mitigate the risk associated with these events. Changes in flow properties along the runout paths of the runoff‐generated debris flows that follow fire may be particularly dramatic, since they initiate when a water‐dominated flow rapidly entrains sediment and later transition back to a water‐dominated flow once they reach greater drainage areas and lower slopes. Here, we study the properties of a debris flow that initiated 1 month following the 2022 Pipeline Fire in northern Arizona, USA. We categorized flow type into two classes, granular debris flow and muddy debris flow, along the 7‐km runout path and examined how flow properties varied between the phases. Changes in channel gradient and confinement likely facilitated the transition between the flow phases, which were characterized by significant differences in maximum clast size, but similar clay content and fine fractions. We also found that the volume and runout distance of the debris flow were 28 and six times greater, respectively, than that of a debris flow that initiated in the same watershed following a fire 12 years earlier. We attribute these differences to the combined effects of two high‐severity fires, suggesting that consideration of recent fire history could improve post‐fire debris‐flow hazard assessments. Results of this study provide quantitative constraints on changes in post‐fire debris‐flow properties along a runout path. Data collected in this study add to a small number of debris‐flow inundation datasets that can be used to test runout models in post‐fire settings.
- 25 May 2023
- Published by Wiley in Earth Surface Processes and Landforms
- Vol. 48 (12) , 2368-2386
Guidance for parameterizing post‐fire hydrologic models with in situ infiltration measurements
Wildfire can alter soil‐hydraulic properties, often resulting in an increased prevalence of infiltration‐excess overland flow and greater potential for debris‐flow hazards. Mini disk tension infiltrometers (MDIs) can be used to estimate soil hydraulic properties, such as field‐saturated hydraulic conductivity (Kfs) and wetting front potential (Hf), and their spatial variability following wildfire. However, the small (point‐scale) footprint of MDI measurements makes it challenging to use these data to parameterize hydrologic models at the hillslope and watershed scales where hydrologic hazards, such as debris flows, initiate. Here, we designed numerical experiments to estimate spatially constant or watershed‐scale effective hydrologic parameters (EHPs) that approximate the response of spatially variable hydrologic parameters with distributions derived from MDI measurements at five sites in the southwestern United States. We found that it is possible to define EHPs for both Kfs and Hf based on the MDI measurements that lead to reasonable approximations of run‐off hydrographs at the outlets of small watersheds (2). We found that watershed EHPs are functions of rainfall characteristics, although they are most sensitive to rainfall intensity and relatively less sensitive to the temporal distribution of rainfall. EHPs are lower than the arithmetic mean of the MDI measurements and are better approximated by the median or geometric mean of the MDI measurements, particularly for storms with recurrence intervals of approximately 1 year or less that commonly initiate post‐fire debris flows. This work demonstrated that using the proposed upscaling method to estimate watershed‐scale EHPs, as opposed to approximating EHPs based on the arithmetic mean of the MDI measurements, improved the ability of a hydrologic model to identify storms that are likely to produce debris flows. Results improved our ability to link point‐scale MDI measurements and watershed‐scale EHPs in post‐fire settings and helped guide our ability to use MDI data to parameterize post‐fire hydrologic models.
- 25 May 2023
- Published by Wiley in Earth Surface Processes and Landforms
- Vol. 48 (12) , 2368-2386
Guidance for parameterizing post‐fire hydrologic models with in situ infiltration measurements
Wildfire can alter soil‐hydraulic properties, often resulting in an increased prevalence of infiltration‐excess overland flow and greater potential for debris‐flow hazards. Mini disk tension infiltrometers (MDIs) can be used to estimate soil hydraulic properties, such as field‐saturated hydraulic conductivity (Kfs) and wetting front potential (Hf), and their spatial variability following wildfire. However, the small (point‐scale) footprint of MDI measurements makes it challenging to use these data to parameterize hydrologic models at the hillslope and watershed scales where hydrologic hazards, such as debris flows, initiate. Here, we designed numerical experiments to estimate spatially constant or watershed‐scale effective hydrologic parameters (EHPs) that approximate the response of spatially variable hydrologic parameters with distributions derived from MDI measurements at five sites in the southwestern United States. We found that it is possible to define EHPs for both Kfs and Hf based on the MDI measurements that lead to reasonable approximations of run‐off hydrographs at the outlets of small watersheds (2). We found that watershed EHPs are functions of rainfall characteristics, although they are most sensitive to rainfall intensity and relatively less sensitive to the temporal distribution of rainfall. EHPs are lower than the arithmetic mean of the MDI measurements and are better approximated by the median or geometric mean of the MDI measurements, particularly for storms with recurrence intervals of approximately 1 year or less that commonly initiate post‐fire debris flows. This work demonstrated that using the proposed upscaling method to estimate watershed‐scale EHPs, as opposed to approximating EHPs based on the arithmetic mean of the MDI measurements, improved the ability of a hydrologic model to identify storms that are likely to produce debris flows. Results improved our ability to link point‐scale MDI measurements and watershed‐scale EHPs in post‐fire settings and helped guide our ability to use MDI data to parameterize post‐fire hydrologic models.
- Open Access
- 10 February 2022
- Published by Copernicus GmbH in Natural Hazards and Earth System Sciences
- Vol. 22 (2) , 361-376
Temporal changes in rainfall intensity–duration thresholds for post-wildfire flash floods in southern California
Rainfall intensity–duration (ID) thresholds are commonly used to assess flash flood potential downstream of burned watersheds. High-intensity and/or long-duration rainfall is required to generate flash floods as landscapes recover from fire, but there is little guidance on how thresholds change as a function of time since fire. Here, we force a hydrological model with radar-derived precipitation to estimate ID thresholds for post-fire flash floods in a 41.5 km2 watershed in southern California, USA. Prior work in this study area constrains temporal changes in hydrological model parameters, allowing us to estimate temporal changes in ID thresholds. The results indicate that ID thresholds increase by more than a factor of 2 from post-fire year 1 to post-fire year 5. Thresholds based on averaging rainfall intensity over durations of 15–60 min perform better than those that average rainfall intensity over shorter time intervals. Moreover, thresholds based on the 75th percentile of radar-derived rainfall intensity over the watershed perform better than thresholds based on the 25th or 50th percentile of rainfall intensity. Results demonstrate how hydrological models can be used to estimate changes in ID thresholds following disturbance and provide guidance on the rainfall metrics that are best suited for predicting post-fire flash floods.
- 10 February 2022
- Published by Copernicus GmbH in Natural Hazards and Earth System Sciences
- Vol. 22 (2) , 361-376
Open AccessTemporal changes in rainfall intensity–duration thresholds for post-wildfire flash floods in southern California
Rainfall intensity–duration (ID) thresholds are commonly used to assess flash flood potential downstream of burned watersheds. High-intensity and/or long-duration rainfall is required to generate flash floods as landscapes recover from fire, but there is little guidance on how thresholds change as a function of time since fire. Here, we force a hydrological model with radar-derived precipitation to estimate ID thresholds for post-fire flash floods in a 41.5 km2 watershed in southern California, USA. Prior work in this study area constrains temporal changes in hydrological model parameters, allowing us to estimate temporal changes in ID thresholds. The results indicate that ID thresholds increase by more than a factor of 2 from post-fire year 1 to post-fire year 5. Thresholds based on averaging rainfall intensity over durations of 15–60 min perform better than those that average rainfall intensity over shorter time intervals. Moreover, thresholds based on the 75th percentile of radar-derived rainfall intensity over the watershed perform better than thresholds based on the 25th or 50th percentile of rainfall intensity. Results demonstrate how hydrological models can be used to estimate changes in ID thresholds following disturbance and provide guidance on the rainfall metrics that are best suited for predicting post-fire flash floods.
- Open Access
- 4 June 2021
- Published by Copernicus GmbH in EGUsphere
- Vol. 2021, 1-27
Temporal changes in rainfall intensity-duration thresholds for post-wildfire flash floods and sensitivity to spatiotemporal distributions of rainfall
Rainfall intensity-duration (ID) thresholds are commonly used to assess flash flood potential downstream of burned watersheds. High-intensity and/or long-duration rainfall is required to generate flash floods as landscapes recover from fire, but there is little guidance on how thresholds change as a function of time since burning. Here, we force a hydrologic model with radar-derived precipitation to estimate ID thresholds for post-fire flash floods in a 41.5 km2 watershed in southern California, USA. Prior work in this study area constrains temporal changes in hydrologic model parameters, allowing us to estimate temporal changes in ID thresholds. Results indicate that ID thresholds increase by more than a factor of 2 from post-fire year 1 to post-fire year 5. Thresholds based on averaging rainfall intensity over durations of 30–60 minutes perform better than those that average rainfall intensity over shorter time intervals. Moreover, thresholds based on the 75th percentile of radar-derived rainfall intensity over the watershed perform better than thresholds based on the 25th or 50th percentile of rainfall intensity. Results demonstrate how hydrologic models can be used to estimate changes in ID thresholds following disturbance and provide guidance on the rainfall metrics that are best suited for predicting post-fire flash floods.
- 4 June 2021
- Published by Copernicus GmbH in EGUsphere
- Vol. 2021, 1-27
Open AccessTemporal changes in rainfall intensity-duration thresholds for post-wildfire flash floods and sensitivity to spatiotemporal distributions of rainfall
Rainfall intensity-duration (ID) thresholds are commonly used to assess flash flood potential downstream of burned watersheds. High-intensity and/or long-duration rainfall is required to generate flash floods as landscapes recover from fire, but there is little guidance on how thresholds change as a function of time since burning. Here, we force a hydrologic model with radar-derived precipitation to estimate ID thresholds for post-fire flash floods in a 41.5 km2 watershed in southern California, USA. Prior work in this study area constrains temporal changes in hydrologic model parameters, allowing us to estimate temporal changes in ID thresholds. Results indicate that ID thresholds increase by more than a factor of 2 from post-fire year 1 to post-fire year 5. Thresholds based on averaging rainfall intensity over durations of 30–60 minutes perform better than those that average rainfall intensity over shorter time intervals. Moreover, thresholds based on the 75th percentile of radar-derived rainfall intensity over the watershed perform better than thresholds based on the 25th or 50th percentile of rainfall intensity. Results demonstrate how hydrologic models can be used to estimate changes in ID thresholds following disturbance and provide guidance on the rainfall metrics that are best suited for predicting post-fire flash floods.
- 8 May 2021
- Published by Wiley in Hydrological Processes
- Vol. 35 (5) , e14208
The timing and magnitude of changes to Hortonian overland flow at the watershed scale during the post‐fire recovery process
Extreme hydrologic responses following wildfires can lead to floods and debris flows with costly economic and societal impacts. Process‐based hydrologic and geomorphic models used to predict the downstream impacts of wildfire must account for temporal changes in hydrologic parameters related to the generation and subsequent routing of infiltration‐excess overland flow across the landscape. However, we lack quantitative relationships showing how parameters change with time‐since‐burning, particularly at the watershed scale. To assess variations in best‐fit hydrologic parameters with time, we used the KINEROS2 hydrological model to explore temporal changes in hillslope saturated hydraulic conductivity (Ksh) and channel hydraulic roughness (nc) following a wildfire in the upper Arroyo Seco watershed (41.5 km2), which burned during the 2009 Station fire in the San Gabriel Mountains, California, USA. This study explored runoff‐producing storms between 2008 and 2014 to infer watershed hydraulic properties by calibrating the model to observations at the watershed outlet. Modelling indicates Ksh is lowest in the first year following the fire and then increases at an average rate of approximately 4.2 mm/h/year during the first 5 years of recovery. The estimated values for Ksh in the first year following the fire are similar to those obtained in previous studies on smaller watersheds (2) following the Station fire, suggesting hydrologic changes detected here can be applied to lower‐order watersheds. Hydraulic roughness, nc, was lowest in the first year following the fire, but increased by a factor of 2 after 1 year of recovery. Post‐fire observations suggest changes in nc are due to changes in grain roughness and vegetation in channels. These results provide quantitative constraints on the magnitude of fire‐induced hydrologic changes following severe wildfires in chaparral‐dominated ecosystems as well as the timing of hydrologic recovery.
- 8 May 2021
- Published by Wiley in Hydrological Processes
- Vol. 35 (5) , e14208
The timing and magnitude of changes to Hortonian overland flow at the watershed scale during the post‐fire recovery process
Extreme hydrologic responses following wildfires can lead to floods and debris flows with costly economic and societal impacts. Process‐based hydrologic and geomorphic models used to predict the downstream impacts of wildfire must account for temporal changes in hydrologic parameters related to the generation and subsequent routing of infiltration‐excess overland flow across the landscape. However, we lack quantitative relationships showing how parameters change with time‐since‐burning, particularly at the watershed scale. To assess variations in best‐fit hydrologic parameters with time, we used the KINEROS2 hydrological model to explore temporal changes in hillslope saturated hydraulic conductivity (Ksh) and channel hydraulic roughness (nc) following a wildfire in the upper Arroyo Seco watershed (41.5 km2), which burned during the 2009 Station fire in the San Gabriel Mountains, California, USA. This study explored runoff‐producing storms between 2008 and 2014 to infer watershed hydraulic properties by calibrating the model to observations at the watershed outlet. Modelling indicates Ksh is lowest in the first year following the fire and then increases at an average rate of approximately 4.2 mm/h/year during the first 5 years of recovery. The estimated values for Ksh in the first year following the fire are similar to those obtained in previous studies on smaller watersheds (2) following the Station fire, suggesting hydrologic changes detected here can be applied to lower‐order watersheds. Hydraulic roughness, nc, was lowest in the first year following the fire, but increased by a factor of 2 after 1 year of recovery. Post‐fire observations suggest changes in nc are due to changes in grain roughness and vegetation in channels. These results provide quantitative constraints on the magnitude of fire‐induced hydrologic changes following severe wildfires in chaparral‐dominated ecosystems as well as the timing of hydrologic recovery.