ACAlexandre Courac

Alexandre Courac

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Alexandre Courac has a total of 28 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Silicon allotropes by large-volume high-pressure techniques: crystal growth mechanisms, phase diagrams and hexagonal nanostructured Si-6H by in situ X-ray diffraction and computational methods

    by Alexandre Courac, Yann Le Godec

    Metastable allotropes of silicon recovered from high-pressure conditions exhibit a wide range of crystal structures, physical properties and transformation pathways that remain only partially understood despite decades of study. This article combines original crystallographic observations with a critical review of phase transformations, nucleation mechanisms and crystal growth processes in elemental Si and Na–Si systems synthesized under high-pressure, high-temperature conditions. Using in situ diffraction data, structural characterization and computational approaches, we analyze how symmetry breaking, lattice instabilities and kinetic constraints govern the formation of dense polymorphs (Si-II, Si-III, Si-XI) and open-framework structures, including clathrate and channel phases. Particular attention is given to the role of large-volume synthesis and chemically assisted growth routes in controlling phase selection, defect formation and recoverability. The evolution of hexagonal polytypes, including nanostructured 6H silicon, is discussed in terms of stacking modifications driven by stress release and thermal treatment. By integrating crystallographic relations, thermodynamic considerations and growth kinetics, this work identifies phase-transformation mechanisms as the key factor linking structure, synthesis conditions and functional properties of silicon allotropes. The results provide a unified framework for understanding crystal growth at high pressure and offer guidance for the controlled synthesis of advanced silicon materials.

  • Open Access

    Anomalous heat capacity and phonon density of states of superhard nanostructured cubic boron nitride

    by Alexandre Courac, Samir F. Matar, Vladimir L. Solozhenko

    Nanostructured polycrystalline cubic boron nitride, an advanced superhard and refractory covalent solid with hardness approaching that of diamond, exhibits extreme mechanical properties due to high chemical and phase purity, ideal crystallinity and high intergranular adhesion. It has been produced by direct phase transformation of pyrolytic turbostratic BN at high pressure – high temperature conditions (20 GPa, 2500 K) using a multianvil apparatus. The non-trivial Raman fingerprint of nano-cBN shows both bulk and surface/grain boundary modes in the phonon density of states. The anomalous heat capacity of nano-cBN is comparable to that of nanostructured metal bulks and shows universal behavior with a maximum at 20-25 percent of the Debye temperature. The intergrain boundaries and their intrinsic stacking faults structure is the only plausible cause of excessive heat capacity. We show that nanostructured cubic boron nitride hosts grain-boundary phonon modes that give rise to an anomalous excess heat capacity, a universal effect previously known only in metals. These findings establish grain boundaries as active thermodynamic degrees of freedom in covalent nanoceramics, opening perspectives for tuning vibrational and thermal properties of ultrahard materials.

  • High-Pressure, High-Temperature Phase Equilibria with Superhard Boron-Rich Compounds of B–C–N–O and B–C–Si Systems by In Situ X-ray Diffraction and CALPHAD Methodology

    by Alexandre Courac, Yann Le Godec, Jelena Sjakste, Nathalie Vast, Olivier Rapaud, Vladimir Turkevich

    Boron-rich compounds within the B–C–N–O and B–C–Si systems exhibit exceptional functional properties, making them highly attractive for industrial applications such as those requiring superhardness, nuclear technologies, or thermoelectricity. High-pressure, high-temperature (HPHT) conditions allow obtaining the ingots of ceramics with best physical properties, as well as to explore advanced materials by means of in situ crystallography, high-pressure chemistry, and nanoscience. This review summarizes recent experimental and theoretical advances on high-pressure, high-temperature (HPHT) phase equilibria up to 20 GPa and 3000 K, focusing on boron carbide (B4C), boron suboxide (B6O), boron subnitride (B13N2), boron silicides, and some of their solid solutions. Emphasis is placed on in situ X-ray diffraction (XRD), density functional theory (DFT) calculations, and CALPHAD thermodynamic modeling. Despite recent progress, significant methodological challenges remain, requiring enhanced experimental accuracy and refined theoretical approaches. Future work should address these gaps to fully leverage the potential of these superhard materials.


  • Open Access

    Nanostructuring and stabilization of metastable rock-salt ZnO: Impact of high-pressure media and compression geometry

    by Petr S. Sokolov, Alexandre Courac, Vladimir L. Solozhenko

    For complete and reproducible recovery of a high-pressure polymorph of zinc oxide, rock-salt ZnO (rs-ZnO), nanostructured wurtzite ZnO (w-ZnO) is typically used as a precursor for high-pressure synthesis. In the case of polycrystalline w-ZnO, only small amounts (less than 30 vol.%) of disordered/nanosized rs ZnO were occasionally observed in the recovered products. Here we report the conditions for the synthesis of single-phase rs ZnO from microcrystalline (40-50 µm) w ZnO powder at 7.7 GPa and 2000 K. The complete recovery of metastable rs-ZnO is possible only by using a multianvil apparatus for quasi-hydrostatic (triaxial) compression/decompression and pyrolytic boron nitride as a pressure medium. Single-phase rs ZnO was produced as colorless nanocrystalline well-sintered bulks with Vickers hardness up to 7 GPa - the record value for ZnO due to a fortunate combination of Hall-Petch nanostructuring effect and high intergranular purity. This unexpected phenomenon can be related to the mechanism of the direct and reverse phase transitions in ZnO, which requires "uniaxial" tensile deformation. Texture analysis of the recovered samples, as well as previous kinetic studies and ab initio simulation of strain-structure relationships, strongly support this model. Thus, 3-axial decompression is a more efficient tool – neglected until now – for reproducible recovery of high-pressure ZnO-based materials than the nature of the w-ZnO precursor and the presence of isostructural rock-salt phases.

  • Mg–C System up to 20 GPa: Its Phase Diagram and Stable Magnesium Carbides

    by Vladimir Z. Turkevich, Carlos Renero-Lecuna, Yixuan Zhao, Yann Le Godec, Timothy A. Strobel, Wilson A. Crichton, Nicolas Guignot, Hicham Moutaabbid, Ioannis Touloupas, Alexandre Courac


  • Open Access

    In Situ High-Pressure Synthesis of New Outstanding Light-Element Materials under Industrial P-T Range

    by Yann Le Godec, Alexandre Courac

    High-pressure synthesis (which refers to pressure synthesis in the range of 1 to several GPa) adds a promising additional dimension for exploration of compounds that are inaccessible to traditional chemical methods and can lead to new industrially outstanding materials. It is nowadays a vast exciting field of industrial and academic research opening up new frontiers. In this context, an emerging and important methodology for the rapid exploration of composition-pressure-temperature-time space is the in situ method by synchrotron X-ray diffraction. This review introduces the latest advances of high-pressure devices that are adapted to X-ray diffraction in synchrotrons. It focuses particularly on the “large volume” presses (able to compress the volume above several mm3 to pressure higher than several GPa) designed for in situ exploration and that are suitable for discovering and scaling the stable or metastable compounds under “traditional” industrial pressure range (3–8 GPa). We illustrated the power of such methodology by (i) two classical examples of “reference” superhard high-pressure materials, diamond and cubic boron nitride c-BN; and (ii) recent successful in situ high-pressure syntheses of light-element compounds that allowed expanding the domain of possible application high-pressure materials toward solar optoelectronic and infra-red photonics. Finally, in the last section, we summarize some perspectives regarding the current challenges and future directions in which the field of in situ high-pressure synthesis in industrial pressure scale may have great breakthroughs in the next years.


  • Open Access

    Heat Capacities of Nanostructured Wurtzite and Rock Salt ZnO: Challenges of ZnO Nano-Phase Diagram

    by Konstantin V. Kamenev, Alexandre Courac, Petr S. Sokolov, Andrei N. Baranov, Felix Yu. Sharikov, Vladimir L. Solozhenko

    Low-temperature heat capacities (Cp) of nanostructured rock salt (rs-ZnO) and wurtzite (w-ZnO) polymorphs of zinc oxide were measured in the 2–315 K temperature range. No significant influence of nanostructuring on Cp of w-ZnO has been observed. The measured Cp of rock salt ZnO is lower than that of wurtzite ZnO below 100 K and is higher above this temperature. Using available thermodynamic data, we established that the equilibrium pressure between nanocrystalline w-ZnO and rs-ZnO is close to 4.6 GPa at 300 K (half as much as the onset pressure of direct phase transformation) and slightly changes with temperature up to 1000 K.


  • Thermoelastic equation of state and melting of Mg metal at high pressure and high temperature

    by Alexandre Courac, Yann Le Godec, Vladimir L. Solozhenko, Nicolas Guignot, Wilson A. Crichton

    The p-V-T equation of state of magnesium metal has been measured up to 20 GPa and 1500 K using both multianvil and opposite anvil techniques combined with synchrotron x-ray diffraction. To fit the experimental data, the model of Anderson–Grüneisen has been used with fixed parameter δT. The 300-K bulk modulus of B0 = 32.5(1) GPa and its first pressure derivative, B0′ = 3.73(2), have been obtained by fitting available data up to 20 GPa to the Murnaghan equation of state. Thermal expansion at ambient pressure has been described using second order polynomial with coefficients a = 25(2) × 10−6 K−1 and b = 9.4(4) × 10−9 K−2. The parameter describing simultaneous pressure and temperature impact on the thermal expansion coefficient (and, therefore, volume) is δT = 1.5(5). The good agreement between fitted and experimental isobars has been achieved to relative volumes of 0.75. The Mg melting observed by x-ray diffraction and in situ electrical resistivity measurements confirms previous results and additionally confirms the p-T estimations in the vicinity of melting.


  • Open Access

    High-pressure synthesis of superhard and ultrahard materials

    by Yann Le Godec, Alexandre Courac, Vladimir L. Solozhenko

    A brief overview of the high-pressure synthesis of superhard and ultrahard materials is presented in this tutorial paper. Modern high-pressure chemistry represents a vast exciting area of research which can lead to new industrially important materials with exceptional mechanical properties. This field is only just beginning to realize its huge potential, and the image of “terra incognita” is not misused. We focus on three facets of this expanding research field by detailing the following: (i) the most promising chemical systems to explore (i.e., “where to search”); (ii) the various methodological strategies for exploring these systems (i.e., “how to explore”); and (iii) the technological and conceptual tools to study the latter (i.e., “the research tools”). These three aspects that are crucial in this research are illustrated by examples of the recent results on high-pressure–high-temperature synthesis of novel super- and ultrahard phases (orthorhombic γ-B28, diamondlike BC5, rhombohedral B13N2, and cubic ternary B–C–N phases). Finally, some perspectives of this research area are briefly reviewed.