Ahmed Ayadi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ahmed Ayadi has a total of 45 co-authors. Here are the top co-authors by number of shared publications:
- Zied Driss
University of Sfax
15 shared publications Mohamed Salah Abid
Laboratory of Electro-Mechanic Systems, National Engineering School of Sfax (ENIS), University of Sfax (US), Sfax, Tunisia
14 shared publicationsZied Driss
Laboratory of Electro‐Mechanic Systems (LASEM) National School of Engineers of Sfax, University of Sfax Sfax Tunisia
13 shared publicationsAbdallah Bouabidi
Laboratory of Electro-Mechanic Systems (LASEM),National Engineering School of Sfax (ENIS), University of Sfax (US), Sfax, Tunisia
10 shared publications- Abdallah Bouabidi
Laboratory of Mechanical Modeling, Energy and Materials (LM2EM), LR24ES23, National School of Engineers of Gabes (ENIG), University of Gabes, Gabes, Tunisia
5 shared publications - Haythem Nasraoui
National School of Engineers of Sfax (ENIS)
5 shared publications
Latest Publications
- 6 October 2026
- Published by Springer Nature
- p. 549-556
Enhancing Darrieus Rotor Performance with Improved Deflector Design
- 6 October 2026
- Published by Springer Nature
- p. 549-556
Enhancing Darrieus Rotor Performance with Improved Deflector Design
- 10 August 2026
- Published by Taylor & Francis in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
- Vol. 48 (1)
Optimization of geometrical parameters for performance improvement of a hybrid Savonius-Darrieus wind rotor
1. The urgent global transition toward low-carbon energy has renewed interest in compact and reliable wind energy converters suitable for urban and low-wind environments (Aravindan and Praveen Kuma...
- 10 August 2026
- Published by Taylor & Francis in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
- Vol. 48 (1)
Optimization of geometrical parameters for performance improvement of a hybrid Savonius-Darrieus wind rotor
1. The urgent global transition toward low-carbon energy has renewed interest in compact and reliable wind energy converters suitable for urban and low-wind environments (Aravindan and Praveen Kuma...
- 27 April 2026
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
Flow control optimization for helical Savonius hydrokinetic turbines using a progressive diverter
The rising demand for environmentally friendly energy has led to a surge in interest in hydrokinetic turbine technology, particularly for applications in low-flow water environments such as rivers and tidal streams. Among various turbine designs, the Savonius turbine stands out for its simplicity, durability, and ability to self-start under low-speed conditions. This study presents an investigation of a helical Savonius hydrokinetic turbine equipped with a novel design of orientable diverter systems aimed at improving flow behavior and turbine performance. The proposed design consists of three guiding walls that are symmetrically orientable with respect to the rotor. The optimal orientation of these walls was examined to assess their impact on the flow field and torque coefficient. To perform the Computational Fluid Dynamics simulations, Ansys Fluent was used to analyze the velocity, pressure, and turbulent kinetic energy distribution around the rotor, as well as the resulting torque output. The results demonstrate that diverters significantly influence the incoming flow structure, which in turn affects the turbine's performance. All proposed diverter configurations produced higher power coefficient ( C p ) values compared to case 0 (without diverter). At tip-speed ratio 0.7, the relative increases in C p compared to case 0 are 18.5%, 31.9%, and 35% for cases 1, 2, and 3, respectively, with case 3 achieving the highest improvement. These findings highlight the importance of optimizing the diverter angle to maximize the effectiveness of Savonius-based hydrokinetic systems.
- 27 April 2026
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
Flow control optimization for helical Savonius hydrokinetic turbines using a progressive diverter
The rising demand for environmentally friendly energy has led to a surge in interest in hydrokinetic turbine technology, particularly for applications in low-flow water environments such as rivers and tidal streams. Among various turbine designs, the Savonius turbine stands out for its simplicity, durability, and ability to self-start under low-speed conditions. This study presents an investigation of a helical Savonius hydrokinetic turbine equipped with a novel design of orientable diverter systems aimed at improving flow behavior and turbine performance. The proposed design consists of three guiding walls that are symmetrically orientable with respect to the rotor. The optimal orientation of these walls was examined to assess their impact on the flow field and torque coefficient. To perform the Computational Fluid Dynamics simulations, Ansys Fluent was used to analyze the velocity, pressure, and turbulent kinetic energy distribution around the rotor, as well as the resulting torque output. The results demonstrate that diverters significantly influence the incoming flow structure, which in turn affects the turbine's performance. All proposed diverter configurations produced higher power coefficient ( C p ) values compared to case 0 (without diverter). At tip-speed ratio 0.7, the relative increases in C p compared to case 0 are 18.5%, 31.9%, and 35% for cases 1, 2, and 3, respectively, with case 3 achieving the highest improvement. These findings highlight the importance of optimizing the diverter angle to maximize the effectiveness of Savonius-based hydrokinetic systems.
- 1 December 2025
- Published by Wiley in Environmental Progress & Sustainable Energy
- Vol. 45 (4)
Enhancing S avonius turbine performance via novel concave‐side blade designs
Wind energy is crucial in the worldwide shift to renewable power and cutting greenhouse gas outputs. This study investigates the aerodynamic performance of a Savonius‐type vertical‐axis wind turbine (VAWT) by introducing novel blade geometries parameterized by three control variables that modify the concave surface of the rotor. Each configuration was evaluated through steady‐state numerical simulations in ANSYS Fluent under identical operating conditions. The results demonstrate that variations in blade shape markedly affect airflow patterns and enhance the turbine's power output efficiency, particularly under high tip‐speed ratios. All proposed designs outperform the conventional blade, and case 4 delivers the highest gain with a 17.93% increase in power coefficient at a tip speed ratio of 1.1. These findings underline the essential importance of accurate blade refinement in maximizing efficiency and offer valuable guidance for the development of high‐performance, small‐scale wind energy systems.
- 1 December 2025
- Published by Wiley in Environmental Progress & Sustainable Energy
- Vol. 45 (4)
Enhancing S avonius turbine performance via novel concave‐side blade designs
Wind energy is crucial in the worldwide shift to renewable power and cutting greenhouse gas outputs. This study investigates the aerodynamic performance of a Savonius‐type vertical‐axis wind turbine (VAWT) by introducing novel blade geometries parameterized by three control variables that modify the concave surface of the rotor. Each configuration was evaluated through steady‐state numerical simulations in ANSYS Fluent under identical operating conditions. The results demonstrate that variations in blade shape markedly affect airflow patterns and enhance the turbine's power output efficiency, particularly under high tip‐speed ratios. All proposed designs outperform the conventional blade, and case 4 delivers the highest gain with a 17.93% increase in power coefficient at a tip speed ratio of 1.1. These findings underline the essential importance of accurate blade refinement in maximizing efficiency and offer valuable guidance for the development of high‐performance, small‐scale wind energy systems.
- 15 September 2025
- Published by SAGE Publications in Wind Engineering
- Vol. 50 (3) , 602-617
Performance improvement of Darrieus rotor through innovative deflector integration
The Darrieus turbine, a vertical axis wind turbine, is used for electricity generation. However, its practical deployment is often limited by performance challenges. This study addresses these limitations by introducing a novel upstream deflector designed to enhance rotor efficiency. A two-dimensional computational fluid dynamics (CFD) approach is employed to simulate the flow field around seven different deflector configurations. The results demonstrate that all configurations significantly improve performance. Specifically, reducing the radial distance (d1) of the deflector enhances both the power coefficient (Cp). A maximum Cp of 0.656 was achieved, representing a twofold increase at a tip speed ratio (TSR) of 3. Likewise, reducing the deflector length (l) led to a 90.6% improvement. Finally, optimizing the deflector’s axial distance (d2) resulted in a peak Cp at TSR = 3.3, reflecting an 87.77% increase. These insights contribute to the advancement of sustainable power generation by guiding the development of more efficient Darrieus turbines.
- 15 September 2025
- Published by SAGE Publications in Wind Engineering
- Vol. 50 (3) , 602-617
Performance improvement of Darrieus rotor through innovative deflector integration
The Darrieus turbine, a vertical axis wind turbine, is used for electricity generation. However, its practical deployment is often limited by performance challenges. This study addresses these limitations by introducing a novel upstream deflector designed to enhance rotor efficiency. A two-dimensional computational fluid dynamics (CFD) approach is employed to simulate the flow field around seven different deflector configurations. The results demonstrate that all configurations significantly improve performance. Specifically, reducing the radial distance (d1) of the deflector enhances both the power coefficient (Cp). A maximum Cp of 0.656 was achieved, representing a twofold increase at a tip speed ratio (TSR) of 3. Likewise, reducing the deflector length (l) led to a 90.6% improvement. Finally, optimizing the deflector’s axial distance (d2) resulted in a peak Cp at TSR = 3.3, reflecting an 87.77% increase. These insights contribute to the advancement of sustainable power generation by guiding the development of more efficient Darrieus turbines.
- Open Access
- 13 August 2025
- Published by Elsevier in Results in Engineering
- Vol. 27
Investigation of the blade tip geometry for improved performance of a Savonius rotor
- 13 August 2025
- Published by Elsevier in Results in Engineering
- Vol. 27
Open AccessInvestigation of the blade tip geometry for improved performance of a Savonius rotor
- 1 August 2025
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
Enhancing the performance of a modified Savonius rotor design
The Savonius rotor represents a category of vertical-axis wind turbines designed to transform wind energy into mechanical power. This study introduces a new blade configuration for the Savonius rotor to improve its aerodynamic efficiency. The redesigned rotor was assessed using two-dimensional computational fluid dynamics simulations performed in ANSYS Fluent. Turbulence was modeled using the shear stress transport k–ω model, and unsteady simulations included a sliding mesh technique to accurately replicate the rotor's rotational behavior. To ensure model accuracy, simulation outcomes were benchmarked against experimental findings from existing literature. A parametric investigation was conducted by altering critical geometric features, such as the blade's curvature and geometry modification angle, to pinpoint the most effective design. Findings revealed that all proposed configurations showed improved power coefficients over the standard design. The results showed that minimizing the geometry modification angle enhances the power coefficient. Additionally, reducing the blade's curvature was found to increase the power coefficient. Notably, configuration 7 achieved a 14.9% increase in power coefficient at a tip-speed ratio of 1.1. These findings highlight the promise of geometric refinement as a method to enhance the efficiency of Savonius rotors.
- 1 August 2025
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
Enhancing the performance of a modified Savonius rotor design
The Savonius rotor represents a category of vertical-axis wind turbines designed to transform wind energy into mechanical power. This study introduces a new blade configuration for the Savonius rotor to improve its aerodynamic efficiency. The redesigned rotor was assessed using two-dimensional computational fluid dynamics simulations performed in ANSYS Fluent. Turbulence was modeled using the shear stress transport k–ω model, and unsteady simulations included a sliding mesh technique to accurately replicate the rotor's rotational behavior. To ensure model accuracy, simulation outcomes were benchmarked against experimental findings from existing literature. A parametric investigation was conducted by altering critical geometric features, such as the blade's curvature and geometry modification angle, to pinpoint the most effective design. Findings revealed that all proposed configurations showed improved power coefficients over the standard design. The results showed that minimizing the geometry modification angle enhances the power coefficient. Additionally, reducing the blade's curvature was found to increase the power coefficient. Notably, configuration 7 achieved a 14.9% increase in power coefficient at a tip-speed ratio of 1.1. These findings highlight the promise of geometric refinement as a method to enhance the efficiency of Savonius rotors.
- 13 May 2025
- Published by Springer Nature
- p. 262-269
Analyzing the Unsteady Behavior of a 2D Savonius Rotor
- 13 May 2025
- Published by Springer Nature
- p. 262-269
Analyzing the Unsteady Behavior of a 2D Savonius Rotor
- Open Access
- 3 April 2025
- Published by Engineering, Technology & Applied Science Research in Engineering, Technology & Applied Science Research
- Vol. 15 (2) , 21313-21318
Comparison between No-Tillaga and Conventional Farming Systems and their Impact on Some Performance Indicators and Wheat Yield
A field study was conducted in loamy agricultural soil of Baghdad Governorate, Tarmiyah District, during the 2021-2022 growing season. The research aimed to evaluate the feasibility and impacts of no-tillage wheat planting systems on plant growth and yield. The experiment examined three factors: tractor operational speed, seed rate, and seeder configurations. Three speed levels 4.23, 6.54, and 8.37 km/h, two seed rates 100 and 140 kg/ha, and three seeder setups were tested. The indicators evaluated included operational productivity, draft force, soil bulk density, and 1000 grain weight. The Randomized Complete Block Design (RCBD), with a nested arrangement and three replicates, was employed. The mean comparisons carried out used the Least Significant Difference (LSD) at the 0.05 significance level. The highest operational productivity of 1.87 ha/h and 1000-grain weight of 48.7 g were achieved with the 8.37 km/h speed, 140 kg/ha rate, and the Z seeder. Conversely, the 4.23 km/h speed, 100 kg/ha rate, and Z seeder resulted in the lowest draft force of 125.76 kgf and soil bulk density of 1.030 mg/m³.
- 3 April 2025
- Published by Engineering, Technology & Applied Science Research in Engineering, Technology & Applied Science Research
- Vol. 15 (2) , 21313-21318
Open AccessComparison between No-Tillaga and Conventional Farming Systems and their Impact on Some Performance Indicators and Wheat Yield
A field study was conducted in loamy agricultural soil of Baghdad Governorate, Tarmiyah District, during the 2021-2022 growing season. The research aimed to evaluate the feasibility and impacts of no-tillage wheat planting systems on plant growth and yield. The experiment examined three factors: tractor operational speed, seed rate, and seeder configurations. Three speed levels 4.23, 6.54, and 8.37 km/h, two seed rates 100 and 140 kg/ha, and three seeder setups were tested. The indicators evaluated included operational productivity, draft force, soil bulk density, and 1000 grain weight. The Randomized Complete Block Design (RCBD), with a nested arrangement and three replicates, was employed. The mean comparisons carried out used the Least Significant Difference (LSD) at the 0.05 significance level. The highest operational productivity of 1.87 ha/h and 1000-grain weight of 48.7 g were achieved with the 8.37 km/h speed, 140 kg/ha rate, and the Z seeder. Conversely, the 4.23 km/h speed, 100 kg/ha rate, and Z seeder resulted in the lowest draft force of 125.76 kgf and soil bulk density of 1.030 mg/m³.
- 17 December 2024
- Published by Taylor & Francis in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
- Vol. 47 (1) , 181-193
Enhancing the efficiency of a Darrieus wind rotor through the addition of deflectors
- 17 December 2024
- Published by Taylor & Francis in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
- Vol. 47 (1) , 181-193
Enhancing the efficiency of a Darrieus wind rotor through the addition of deflectors