Subrat Mishra
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Subrat Mishra has a total of 36 co-authors. Here are the top co-authors by number of shared publications:
Souvik Mahapatra
Department of Electrical Engineering, IIT Bombay, Mumbai, India
4 shared publicationsChetan K. Dabhi
Department of Electrical Engineering, IIT Kanpur, Kanpur 208016, India
3 shared publications- Francky Catthoor
National Technical University of Athens
3 shared publications - Herman Oprins
IMEC, Leuven, Belgium
3 shared publications - Narendra Parihar
Department of Electrical Engineering, IIT Bombay, Mumbai 400076, India
3 shared publications - Yogesh Singh Chauhan
Indian Institute of Technology (IIT) Kanpur
3 shared publications
Latest Publications
- 30 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 34 (6) , 2005-2009
Thermal Insights of 3-D BS-PDN in Cloud Server SoC Using TCAD Modeling
In this brief, the thermal performance of a large-scale cloud server system-on-chip (SoC) with the backside power delivery network (BS-PDN) and 3-D integration in memory-on-logic (MoL)/logic-on-memory (LoM) configuration with 2.5-D packaging is analyzed in advanced A10 nanosheet technology node using Sentaurus TCAD platform. The results show a 45.6% (~20.3 K) thermal penalty for the 80-core SoC in MoL with BS-PDN compared with the 2-D-baseline frontside PDN (FS-PDN), using a heatsink with forced cooling. A nonuniform power map further aggravates thermal concerns, which can be mitigated using an LoM configuration with BS-PDN, reducing the penalty to 22% (~15 K). Extending the study to a 320-core SoC, in conjunction with an advanced cooling system, LoM with BS-PDN shows 45.3% (~29 K) lower temperature than conventional MoL BS-PDN. The modeling results provide valuable insights and motivate future research into packaging and cooling techniques for BS-PDN integration.
- 30 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 34 (6) , 2005-2009
Thermal Insights of 3-D BS-PDN in Cloud Server SoC Using TCAD Modeling
In this brief, the thermal performance of a large-scale cloud server system-on-chip (SoC) with the backside power delivery network (BS-PDN) and 3-D integration in memory-on-logic (MoL)/logic-on-memory (LoM) configuration with 2.5-D packaging is analyzed in advanced A10 nanosheet technology node using Sentaurus TCAD platform. The results show a 45.6% (~20.3 K) thermal penalty for the 80-core SoC in MoL with BS-PDN compared with the 2-D-baseline frontside PDN (FS-PDN), using a heatsink with forced cooling. A nonuniform power map further aggravates thermal concerns, which can be mitigated using an LoM configuration with BS-PDN, reducing the penalty to 22% (~15 K). Extending the study to a 320-core SoC, in conjunction with an advanced cooling system, LoM with BS-PDN shows 45.3% (~29 K) lower temperature than conventional MoL BS-PDN. The modeling results provide valuable insights and motivate future research into packaging and cooling techniques for BS-PDN integration.
- 25 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 31 (12) , 1896-1904
Impact of 3-D Integration on Thermal Performance of RISC-V MemPool Multicore SOC
Due to the rise in the number of cores in modern multicore architectures, 3-D integration (i.e., vertical stacking of chips) of system-on-a-chip (SOC) promises better performance due to a drastic reduction in global interconnect lengths and die footprint compared with 2-D counterparts. However, thermal issues are predominant in 3-D-SOCs due to the vertical stacking nature of chips which multiplies the transistor power density by the number of dies within the stack. Also, the reduced lateral heat spreading with aggressive die thinning degrades the on-chip thermal performances. In this article, we investigate the thermal performance analysis of 3-D-SOC and compare the results with the 2-D-SOC designs for a MemPool multicore SOC with shared L1 scratchpad memory (SPM). Simulation results reveal that the 3-D-SOC using memory-on-logic (MOL) configuration increases the on-chip maximum temperature by more than 20% compared with the baseline 2-D-SOC and the logic die temperature is relatively higher (3.6%) than the memory die. We also explore the impact of architectural floor-planning effects and 3-D functional partitioning on thermal performance of the MemPool instances in the 3-D-SOC with memory capacity ranging from 1 to 8 MiB and benchmarked the thermal performance with the 2-D-SOC designs. We observe that the junction-to-ambient temperature ( $T_{\max}$ ) increases by 44% and is predominant for the SPM capacity of 8 MiB. Further investigations on various 3-D stacking configurations reveal there is an improvement in thermal performance for MOL over logic-on-memory (LOM) for L1 SPM capacity of 1, 2, and 4 MiB, and LOM over the MOL configuration for L1 SPM capacity of 8 MiB.
- 25 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 31 (12) , 1896-1904
Impact of 3-D Integration on Thermal Performance of RISC-V MemPool Multicore SOC
Due to the rise in the number of cores in modern multicore architectures, 3-D integration (i.e., vertical stacking of chips) of system-on-a-chip (SOC) promises better performance due to a drastic reduction in global interconnect lengths and die footprint compared with 2-D counterparts. However, thermal issues are predominant in 3-D-SOCs due to the vertical stacking nature of chips which multiplies the transistor power density by the number of dies within the stack. Also, the reduced lateral heat spreading with aggressive die thinning degrades the on-chip thermal performances. In this article, we investigate the thermal performance analysis of 3-D-SOC and compare the results with the 2-D-SOC designs for a MemPool multicore SOC with shared L1 scratchpad memory (SPM). Simulation results reveal that the 3-D-SOC using memory-on-logic (MOL) configuration increases the on-chip maximum temperature by more than 20% compared with the baseline 2-D-SOC and the logic die temperature is relatively higher (3.6%) than the memory die. We also explore the impact of architectural floor-planning effects and 3-D functional partitioning on thermal performance of the MemPool instances in the 3-D-SOC with memory capacity ranging from 1 to 8 MiB and benchmarked the thermal performance with the 2-D-SOC designs. We observe that the junction-to-ambient temperature ( $T_{\max}$ ) increases by 44% and is predominant for the SPM capacity of 8 MiB. Further investigations on various 3-D stacking configurations reveal there is an improvement in thermal performance for MOL over logic-on-memory (LOM) for L1 SPM capacity of 1, 2, and 4 MiB, and LOM over the MOL configuration for L1 SPM capacity of 8 MiB.
- 29 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 30 (11) , 1668-1676
Thermal Performance Analysis of Mempool RISC-V Multicore SoC
The presence of multiple cores in modern multicore architectures makes thermal management and temperature estimation a really challenging task for enhancing reliability and lifespan. Due to the presence of many cores, the core/tile spacing needs to be optimized in order to enhance the thermal coupling between interconnect routing blocks and active tiles. In addition, the tiles activity patterns under partial workload conditions significantly affect the maximum on-chip temperature which results in nonuniform temperature distribution. This is due to poor thermal coupling between neighboring tiles owing to the decrease in spacing between cores. In this article, we investigate the thermal performance analysis of a 256-core (i.e., 64 tiles) Mempool reduced instruction set computer (RISC) V-based architecture considering the impact of inter tiles spacing. Simulation results reveal that lateral heat spreading predominantly affects the thermal performance in multicore architectures under partial workload conditions. We also optimize the thermal performance with different tiles activity pattern. Simulation results reveal that both the maximum on-chip temperature and lateral heat spreading are improved for specific tiles activity patterns. Also the thermal performance analysis considering the “tile-insite effect” reveals that there is little impact on on-chip maximum temperature ( $T_{\text{max}}$ ), but the on-chip thermal gradient ( $\Delta T$ ) and the thermal profile pattern are predominantly affected. Finally, the effect of the secondary heat path toward printed circuit board (PCB) is studied in this work.
- 29 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 30 (11) , 1668-1676
Thermal Performance Analysis of Mempool RISC-V Multicore SoC
The presence of multiple cores in modern multicore architectures makes thermal management and temperature estimation a really challenging task for enhancing reliability and lifespan. Due to the presence of many cores, the core/tile spacing needs to be optimized in order to enhance the thermal coupling between interconnect routing blocks and active tiles. In addition, the tiles activity patterns under partial workload conditions significantly affect the maximum on-chip temperature which results in nonuniform temperature distribution. This is due to poor thermal coupling between neighboring tiles owing to the decrease in spacing between cores. In this article, we investigate the thermal performance analysis of a 256-core (i.e., 64 tiles) Mempool reduced instruction set computer (RISC) V-based architecture considering the impact of inter tiles spacing. Simulation results reveal that lateral heat spreading predominantly affects the thermal performance in multicore architectures under partial workload conditions. We also optimize the thermal performance with different tiles activity pattern. Simulation results reveal that both the maximum on-chip temperature and lateral heat spreading are improved for specific tiles activity patterns. Also the thermal performance analysis considering the “tile-insite effect” reveals that there is little impact on on-chip maximum temperature ( $T_{\text{max}}$ ), but the on-chip thermal gradient ( $\Delta T$ ) and the thermal profile pattern are predominantly affected. Finally, the effect of the secondary heat path toward printed circuit board (PCB) is studied in this work.
- 6 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 30 (11) , 1757-1769
Multitimescale Mitigation for Performance Variability Improvement in Time-Critical Systems
Ensuring a timing guarantee is crucial for time-critical applications. However, this task becomes more challenging with the increasing performance variability generated by complicated modern hardware and software. A widespread solution to the problem is real-time scheduling, which depends on worst-case execution time (WCET) and dynamic voltage frequency scaling (DVFS). Although these techniques provide the necessary guarantees, they also exhibit important limitations from the long switching time of DVFS and the overly pessimistic execution time model of WCET. In this work, a multitimescale mitigation methodology is proposed to improve the way of tackling performance variability in both timing guarantee and energy saving. By using both the DVFS and heterogeneous datapath (HDP) knobs, this methodology can push the timescale of mitigation down to the submillisecond level. Moreover, this methodology can calculate a tight upper bound of execution time at run-time using dynamic scenarios (DSs). Simulation shows that the proposed methodology can ensure zero deadline misses with a smaller safety time margin than the method using only DVFS and WCET. This advantage can translate into an energy reduction by half compared to the conventional WCET-based method with a single DVFS knob.
- 6 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 30 (11) , 1757-1769
Multitimescale Mitigation for Performance Variability Improvement in Time-Critical Systems
Ensuring a timing guarantee is crucial for time-critical applications. However, this task becomes more challenging with the increasing performance variability generated by complicated modern hardware and software. A widespread solution to the problem is real-time scheduling, which depends on worst-case execution time (WCET) and dynamic voltage frequency scaling (DVFS). Although these techniques provide the necessary guarantees, they also exhibit important limitations from the long switching time of DVFS and the overly pessimistic execution time model of WCET. In this work, a multitimescale mitigation methodology is proposed to improve the way of tackling performance variability in both timing guarantee and energy saving. By using both the DVFS and heterogeneous datapath (HDP) knobs, this methodology can push the timescale of mitigation down to the submillisecond level. Moreover, this methodology can calculate a tight upper bound of execution time at run-time using dynamic scenarios (DSs). Simulation shows that the proposed methodology can ensure zero deadline misses with a smaller safety time margin than the method using only DVFS and WCET. This advantage can translate into an energy reduction by half compared to the conventional WCET-based method with a single DVFS knob.
- 5 December 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 66 (1) , 316-323
Device to Circuit Framework for Activity-Dependent NBTI Aging in Digital Circuits
A framework is proposed for activity-dependent timing degradation due to p-FET negative bias temperature instability (NBTI) in digital circuits. A fixed-time compact model is proposed for NBTI and validated with physical model predictions for various digital circuits under different input signal slew and fan-out load conditions. The model is used to predict the timing degradation in digital circuits under arbitrary input activities. An equivalent degradation level is found that can be applied to all p-FETs in the circuit and can serve as an upper bound of degradation due to arbitrary input activity and avoid the conservative worst case dc analysis. The activity dependence is studied in microprocessors as well as arithmetic circuits under different actual workloads.
- 5 December 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 66 (1) , 316-323
Device to Circuit Framework for Activity-Dependent NBTI Aging in Digital Circuits
A framework is proposed for activity-dependent timing degradation due to p-FET negative bias temperature instability (NBTI) in digital circuits. A fixed-time compact model is proposed for NBTI and validated with physical model predictions for various digital circuits under different input signal slew and fan-out load conditions. The model is used to predict the timing degradation in digital circuits under arbitrary input activities. An equivalent degradation level is found that can be applied to all p-FETs in the circuit and can serve as an upper bound of degradation due to arbitrary input activity and avoid the conservative worst case dc analysis. The activity dependence is studied in microprocessors as well as arithmetic circuits under different actual workloads.
- 26 October 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 66 (1) , 271-278
A Simulation Study of NBTI Impact on 14-nm Node FinFET Technology for Logic Applications: Device Degradation to Circuit-Level Interaction
A comprehensive simulation flow is demonstrated to assess the negative-bias temperature instability (NBTI) impact on the performance and power of digital logic circuits based on the 14-nm node FinFET technology. Fully calibrated technology computer-aided design simulations are used to determine the preaged and postaged device characteristics; the results are used for calibrating the BSIM-CMG compact model. Standard cell libraries are characterized next, by only threshold voltage shift (ΔV T ) and by both ΔV T and subthreshold slope shift (ASS). Various benchmark circuits are synthesized and analyzed, and their timing degradation is compared to ring oscillator results. The consequence of ignoring ASS on off current and static power (P static ) is estimated.
- 26 October 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 66 (1) , 271-278
A Simulation Study of NBTI Impact on 14-nm Node FinFET Technology for Logic Applications: Device Degradation to Circuit-Level Interaction
A comprehensive simulation flow is demonstrated to assess the negative-bias temperature instability (NBTI) impact on the performance and power of digital logic circuits based on the 14-nm node FinFET technology. Fully calibrated technology computer-aided design simulations are used to determine the preaged and postaged device characteristics; the results are used for calibrating the BSIM-CMG compact model. Standard cell libraries are characterized next, by only threshold voltage shift (ΔV T ) and by both ΔV T and subthreshold slope shift (ASS). Various benchmark circuits are synthesized and analyzed, and their timing degradation is compared to ring oscillator results. The consequence of ignoring ASS on off current and static power (P static ) is estimated.
- 24 September 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 65 (11) , 4846-4853
NBTI-Related Variability Impact on 14-nm Node FinFET SRAM Performance and Static Power: Correlation to Time Zero Fluctuations
A Monte Carlo SPICE framework is proposed to evaluate the impact of negative bias temperature instability (NBTI) variability on performance and static power ( ${P}_{\text {S}}$ ) of static random access memory (SRAM) array on 14-nm node FinFETs. Gamma distribution is found to be applicable for NBTI-induced threshold voltage ( $\Delta {V}_{T}$ ) and subthreshold slope ( $\Delta $ SS) shifts by using data set from different sources. A compact variability model is proposed for the time evolution of mean and variance of NBTI distribution, considering any possible correlation between time zero and NBTI variability. The relative sensitivity of device and SRAM degradation are evaluated, by correlating SRAM static noise margin degradation to transistor level ${V}_{T}$ shift. The impact of $\Delta $ SS on ${P}_{\text {S}}$ improvement due to NBTI is also evaluated.
- 24 September 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 65 (11) , 4846-4853
NBTI-Related Variability Impact on 14-nm Node FinFET SRAM Performance and Static Power: Correlation to Time Zero Fluctuations
A Monte Carlo SPICE framework is proposed to evaluate the impact of negative bias temperature instability (NBTI) variability on performance and static power ( ${P}_{\text {S}}$ ) of static random access memory (SRAM) array on 14-nm node FinFETs. Gamma distribution is found to be applicable for NBTI-induced threshold voltage ( $\Delta {V}_{T}$ ) and subthreshold slope ( $\Delta $ SS) shifts by using data set from different sources. A compact variability model is proposed for the time evolution of mean and variance of NBTI distribution, considering any possible correlation between time zero and NBTI variability. The relative sensitivity of device and SRAM degradation are evaluated, by correlating SRAM static noise margin degradation to transistor level ${V}_{T}$ shift. The impact of $\Delta $ SS on ${P}_{\text {S}}$ improvement due to NBTI is also evaluated.
- 1 February 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 111-113
A BTI analysis tool (BAT) to simulate p-MOSFET ageing under diverse experimental conditions
A physical modeling framework is demonstrated for Negative Bias Temperature Instability (NBTI). It can simulate temporal kinetics of threshold voltage shift (ΔVt) during and after DC and AC stress and mixed DC-AC stress for dynamic voltage, frequency and activity conditions. It can predict gate insulator process dependence and is consistent with large and small area devices. The framework is included in a commercial TCAD software to simulate degradation of FinFETs and GAA NWFETs.
- 1 February 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 111-113
A BTI analysis tool (BAT) to simulate p-MOSFET ageing under diverse experimental conditions
A physical modeling framework is demonstrated for Negative Bias Temperature Instability (NBTI). It can simulate temporal kinetics of threshold voltage shift (ΔVt) during and after DC and AC stress and mixed DC-AC stress for dynamic voltage, frequency and activity conditions. It can predict gate insulator process dependence and is consistent with large and small area devices. The framework is included in a commercial TCAD software to simulate degradation of FinFETs and GAA NWFETs.
- 12 October 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 63 (12) , 4624-4631
TCAD-Based Predictive NBTI Framework for Sub-20-nm Node Device Design Considerations
The kinetics of trap generation during negative-bias temperature instability (NBTI) stress in pMOSFETs, as governed by the double interface H–H2 reaction–diffusion (RD) model, is incorporated for the first time in a commercial technology computer-aided design (TCAD) software, and used for simulating degradation in various device architectures. The calibrated TCAD framework is shown to successfully explain the measured impact of interface trap generation ($ \Delta N _{\mathrm{ IT}} $ ) in bulk silicon FinFETs for wide range of stress bias and temperature. The impact of device design on NBTI degradation is explored by comparing the simulated trap generation kinetics in bulk FinFET, silicon on insulator FinFET, and gate all around nanowire FET devices having different geometries. The simulated predictions agree well with the experimental observations reported in the literature. The proposed TCAD framework would enable performance-reliability co-optimization during device design for advanced technology nodes.- 12 October 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 63 (12) , 4624-4631
TCAD-Based Predictive NBTI Framework for Sub-20-nm Node Device Design Considerations
The kinetics of trap generation during negative-bias temperature instability (NBTI) stress in pMOSFETs, as governed by the double interface H–H2 reaction–diffusion (RD) model, is incorporated for the first time in a commercial technology computer-aided design (TCAD) software, and used for simulating degradation in various device architectures. The calibrated TCAD framework is shown to successfully explain the measured impact of interface trap generation ($ \Delta N _{\mathrm{ IT}} $ ) in bulk silicon FinFETs for wide range of stress bias and temperature. The impact of device design on NBTI degradation is explored by comparing the simulated trap generation kinetics in bulk FinFET, silicon on insulator FinFET, and gate all around nanowire FET devices having different geometries. The simulated predictions agree well with the experimental observations reported in the literature. The proposed TCAD framework would enable performance-reliability co-optimization during device design for advanced technology nodes.- 10 May 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 63 (7) , 2764-2770
On the Impact of Time-Zero Variability, Variable NBTI, and Stochastic TDDB on SRAM Cells
We propose a Monte Carlo (MC) simulation framework for circuits taking into account the time-dependent dielectric breakdown (TDDB) statistics along with time-0 variability and variable negative-bias temperature instability (NBTI) under circuit operating conditions in SPICE environment. MC simulation is performed with the proposed framework for ~100k static random access memory (SRAM) cells using experimentally calibrated device-level degradation distribution. Cell performance degradation is compared for both planar and FinFET-based SRAM cells. It is shown that TDDB can significantly impact the SRAM failure probability even under usual circuit operation. It is reported that FinFET-based cells show far more robustness toward cell performance degradation than their planar counterparts.
- 10 May 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 63 (7) , 2764-2770
On the Impact of Time-Zero Variability, Variable NBTI, and Stochastic TDDB on SRAM Cells
We propose a Monte Carlo (MC) simulation framework for circuits taking into account the time-dependent dielectric breakdown (TDDB) statistics along with time-0 variability and variable negative-bias temperature instability (NBTI) under circuit operating conditions in SPICE environment. MC simulation is performed with the proposed framework for ~100k static random access memory (SRAM) cells using experimentally calibrated device-level degradation distribution. Cell performance degradation is compared for both planar and FinFET-based SRAM cells. It is shown that TDDB can significantly impact the SRAM failure probability even under usual circuit operation. It is reported that FinFET-based cells show far more robustness toward cell performance degradation than their planar counterparts.