AQAniu Qian

Aniu Qian

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Aniu Qian has a total of 57 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Regulated Ionic Channels and Coordinate-Bonded Effect on Enhanced Trivalent-Ion Transport during Electrosorption

    by Aniu Qian, Hao Wu, Yue Sun, Anning Song, Pengju Yang, Jianming Gao, Hu Shi, Li Cui, Fangqin Cheng

    The difficulty in clarifying the overlapping ionic transport pathways of the layered Ti3C2Tx electrode has led to a lack of clear structural criteria to enhance electrosorption (e.g., ion-selective separation, water treatment, and resource recovery). In particular, a highly charged, large trivalent ion brings harsh pursuits on the electrode transport structure. Interlayer spacing is considered the dominant factor to improve trivalent-ion electrosorption capacity. However, our results reveal a weak correlation between the interlayer spacing and ion electrosorption capacity. Instead, capacitive deionization (CDI) experiments and molecular dynamics simulations demonstrate a strong correlation between coordinate-bonded effects, regulated ionic channels within the electrode, and ion adsorption capacity. Through a protonated pg-C3N4/Ti3C2Tx//activated carbon asymmetric CDI device, strong C3N4-Al3+ coordination and induced regulated 3D-structured ion channels achieve an exceptional Al3+ adsorption capacity (55.22 mg g-1) owing to the N-Al bond in electrode-ion interaction, outperforming Mg2+ and Na+ cases (31.26 and 24.36 mg g-1, respectively) caused by parallel layer-stacked C3N4-Mg2+ and C3N4-Na+. Moreover, in the AlCl3-adsorbed NaCl solution, the regulated ionic transport channels markedly enhance Na+ intercalation, yielding a 2.7-fold increase compared to that of the identical device in fresh NaCl solution after 100 cycles. Practical tests verify the enhanced Al3+ enrichment and preferential Al3+/Na+ separation via the ion-capturing CDI electrode. These findings suggest ways to understand and utilize electrode-ion interactions to achieve the reinforced Na+ adsorption performance and overcome challenges associated with large multivalent ion adsorption, with implications for ion-selective removal, resource recovery, and multivalent metal-ion energy storage.


  • Synergistic Co/Fe/Zn–N x Active Sites on Microporous Carbon Nanotubes for High Power-Density Flexible Aqueous Magnesium–Air Batteries

    by Zihan Gao, Miaomiao Cui, Anning Song, Huirong Zhang, Liang Wei, Yanqiang Lei, Aniu Qian, Hu Shi, Qijun Sun

    Flexible magnesium-air batteries employing neutral electrolytes offer attractive energy-storage solutions for wearable electronics due to their favorable biocompatibility and competitive energy density. However, challenges (inadequate cyclic stability, sluggish oxygen reduction, and limited choice in compatible electrolytes and efficient cathode electrocatalysts) hinder their development. Herein, we demonstrate an advanced aqueous Mg-air battery featuring a novel cathode architecture: zinc-pored cobalt-iron (CoFe) alloy confined within nitrogen-doped carbon nanotubes, where Zn-induced micropores and Nx-coordinated Co/Fe/Zn enhance reversible oxygen reaction and accelerate discharge-product decomposition. With a poly(vinyl alcohol) (PVA)-NaCl hydrogel electrolyte, the resulting flexible Mg-air batteries achieved robust flexibility, stable open-circuit potential (1.68 V), high power density (21 mW cm-2), and excellent durability (9 h). Practical application was verified through powering a rollable display wristband. This work establishes a viable pathway with interfacial engineering to realize high power-density aqueous Mg-air batteries in flexible electronics and deformable energy devices.

  • New Hypothesis on Enhancing β-Sheet Formation during the Tau Fragment Dimer Transition from a Flexible Monomer: Insights into Primary Nucleation Processes by Histidine Behaviors

    by Yue Sun, Yaru Shi, Jing Li, Aniu Qian, Hu Shi

    Slight perturbations in pH can have significant effects on the primary nucleation processes of the tau protein. The behaviors of histidine due to its pivotal role in modulating H-bonding network interactions and electrostatic interactions have garnered considerable attention, as it can influence the structural characteristics and aggregation properties. However, the nucleation mechanisms and related intermediates are still unclear. In the current study, we performed nine independent replica exchange molecular dynamics simulations to investigate dimer formation involving R3(εδ) in conjunction with the R1, R2, and R4 monomers. Our findings substantiate that, in comparison to R1-R3(εδ) and R4-R3(εδ) systems, the R2-R3(εδ) systems consistently manifest the highest averaged β-sheet content, with the fundamental feature of R3(εδ) promoting R2 rearrangement. Our comprehensive analysis reveals that high-β-sheet-rich systems exhibit a conserved three/five β-strand structure. In these β-strand-rich systems, one chain [R1/R2/R4 or R3(εδ)] with robust intrachain H-bonding interactions coordinates with another chain through interchain H-bonding interactions, contributing to the overall stability. Furthermore, we discuss distinct histidine behaviors, including backbone/side chain interactions and donor/acceptor roles. This study provides a comprehensive understanding of the aggregation propensities of soluble tau oligomers and sheds light on the primary nucleation mechanism. It contributes to a new perspective for understanding protein folding and misfolding.


  • Surface ‒OH Termination‐Reduced Ti3C2Tx Pseudo‐capacitors with Reinforced Ionic Liquid Accessibility to Achieve High Energy Density

    by Hu Shi, Mengyao Ma, Yue Sun, Miaomiao Cui, Aniu Qian

    Highly conductive Ti3C2Tx pseudo‐capacitors hold promise to expand energy density by utilizing ionic liquid (IL) electrolytes (e.g., 1‐ethyl‐3‐methylimidazolium bis trifluoromethane sulfonyl imide, EMITFSI) that possesses broaden voltage window, resulting in various applications involving hybrid vehicle, rail transportation, and power system. However, abundantly random surface ‒OH terminations cannot maintain an extremely stabilized Ti3C2Tx layer spacing framework for efficient ion arrangements, increase ionic diffusion barriers, and decline in energy density. Herein, intensely chemical covalent bonding interactions of ‒SH, ‒COOH, and ‒NH2 terminated L‐cysteine molecules with ‒OH terminations are proposed to stabilize Ti3C2Tx and expand interlayer structure, allowing sufficient ionic transport and realizing high energy‐density Ti3C2Tx pseudo‐capacitors. It is found that, with cysteine molecules stayed flat to Ti3C2Tx layer, superior hydrophilic surface, and increased interlayer spacing to 1.51 nm, 2.16‐folds higher than Ti3C2Tx electrode, the Ti3C2Tx‒cysteine electrode delivered high capacitance of 279 F g−1 in EMITFSI/acetonitrile electrolyte. Assembled asymmetric Ti3C2Tx‒cysteine//activated carbon flexible device exhibited a high voltage of 2.9 V and a high energy density of 72.1 Wh kg−1 at a power density of 874 W kg−1, which could power various colored smart rollable flexible electronics at bent angle of 90°. Additionally, identical mechanisms are found in Ti3C2Tx‐amino acid systems, wherein amino acid stayed flat between Ti3C2Tx layers with optimized content, interlayer spacing, and capacitance, no matter amino acid in different charged feature and different sidechain lengths (e.g., glutamine, cysteine, and lysine). The present study provides systematically experimental evidence for improving ion accessibility in IL electrolytes based on an organic‐modified Ti3C2Tx electrode structure.


  • Open Access

    Catalytic effects of graphene structures on Pt/graphene catalysts

    by Zhenzhen Du, Fan Yu, Jun Wang, Jiongli Li, Xudong Wang, Aniu Qian

    Pt/C catalysts have been considered the ideal cathodic catalyst for proton exchange membrane fuel cells (PEMFCs) due to their superior oxygen reduction reaction (ORR) catalytic activity at low temperatures. However, oxidation and corrosion of the carbon black support at the cathode result in the agglomeration of Pt particles, which reduces the active sites in the Pt/C catalyst. Graphene supports have shown great promise to address this issue, and therefore, finding out the main structural features of the graphene support is of great significance for guiding the rational construction of graphene-based Pt (Pt/graphene) catalysts for optimized ORR catalysts. In order to systematically study the influence of the structural features of the graphene support on the electro-catalytic properties of Pt/graphene catalysts, we prepared porous nitrogen-doped reduced graphene oxide (P-NRGO), nitrogen-doped reduced graphene oxide (NRGO), treated P-NRGO (TP-NRGO) and reduced graphene oxide (RGO) with different nitrogen species contents (7.76, 7.54, 3.24, and 0.14 at%), oxygen species contents (18.68, 18.12, 6.34 and 21.12 at%), specific surface areas (370.4, 70.6, 347.7 and 276.2 m2 g−1) and pore volumes (1.366, 0.1424, 1.3299 and 1.0414 cm3 g−1). The ORR activity of the four Pt/graphene catalysts when listed in the order of their half-wave potentials (E1/2) and peak power densities was found to be as Pt/P-NRGO > Pt/NRGO > Pt/TP-NRGO > Pt/RGO. The long-term durability of Pt/P-NRGO for the operation of H2–air PEMFCs is better than that of commercial Pt/C catalysts. The excellent ORR catalytic performance of Pt/P-NRGO compared to that of the other three Pt/graphene catalysts is ascribed to the high nitrogen species content of P-NRGO that can facilitate the uniform dispersion of Pt particles and provide accessible active sites for ORR. The results indicate that the specific surface area (SSA) and heteroatom dopants have strong influence on the Pt particle size, and that the nitrogen species of graphene supports play a more important role than the oxygen species, specific surface area and pore volume for the Pt/graphene catalysts in providing accessible active sites.


  • NiCo2O4 Nanowires Immobilized on Nitrogen‐Doped Ti3C2Tx for High‐Performance Wearable Magnesium–Air Batteries

    by Aniu Qian, Miaomiao Cui, Yue Sun, Guangyu Wang, Yuehui Hao, Chengli Yang, Hu Shi

    Flexible magnesium (Mg)–air batteries provide an ideal platform for developing efficient energy‐storage devices toward wearable electronics and bio‐integrated power sources. However, high‐capacity bio‐adaptable Mg–air batteries still face the challenges in low discharge potential and inefficient oxygen electrodes, with poor kinetics property toward oxygen reduction reaction (ORR). Herein, spinel nickel cobalt oxides (NiCo2O4) nanowires immobilized on nitrogen‐doped Ti3C2Tx (NiCo2O4/N‐Ti3C2Tx) are reported via surface chemical‐bonded effect as oxygen electrodes, wherein surface‐doped pyridinic–N–C and Co–pyridinic–N moieties accounted for efficient ORR owing to increased interlayer spacing and changed surrounding environment around Co metals in NiCo2O4. Importantly, in polyethylene glycol (PVA)‐NaCl neutral gel electrolytes, the NiCo2O4/N‐Ti3C2Tx‐assembled quasi‐solid wearable Mg–air batteries delivered high open‐circuit potential of 1.5 V, good flexibility under various bent angles, high power density of 9.8 mW cm–2, and stable discharge duration to 12 h without obvious voltage drop at 5 mA cm−2, which can power a blue flexible light‐emitting diode (LED) array and red smart rollable wearable device. The present study stimulates studies to investigate Mg–air batteries involving human‐body adaptable neutral electrolytes, which will facilitate the application of Mg–air batteries in portable, flexible, and wearable power sources for electronic devices.


  • Freeing Fluoride Termination of Ti3C2Tx via Electrochemical Etching for High-Performance Capacitive Deionization

    by Aniu Qian, Hao Wu, Guangyu Wang, Nan Sun, Huaigang Cheng, Kan Zhang, Fangqin Cheng

    Ti3C2Tx MXene is a promising Faradic capacitive deionization (CDI) electrode for high salt removal in future desalination, whereas the surface termination group of fluoride (-F) significantly impedes ion access to Ti3C2 and charge-transfer efficiency. Herein, we propose an electrochemically etched strategy to synthesize -F-free Ti3C2Tx through three-electrode cyclic voltammetry scanning within a narrowed potential window in an alkaline electrolyte. The resulting assembly of an asymmetric electrochemical-etched Ti3C2Tx//activated carbon CDI device can deliver an excellent salt removal capacity of 20.27 mg·g-1 with an adsorption rate of 1.01 mg g-1 min-1 owing to the enhanced hydrophilicity and ion transport. The tiny CDI device is demonstrated, which can generate an electric current during the electrosorption of salt ions, thus facilitating the powering of a red light-emitting diode. This study opens a new avenue for the surface chemistry of Ti3C2Tx and is expected to achieve future applications in desalination and renewable energy.


  • Surface fluorine preservation dependence of Ti3C2TxMXene for high electrochemical properties in ionic liquid electrolytes

    by Guangyu Wang, Hao Wu, Yiming Liu, Yiwei Pang, Junsheng Hao, Fangqin Cheng, Aniu Qian, Hu Shi

    We demonstrated a replacement mechanism of surface-terminated –CF3in the Ti3C2Txsurface structure with good hydrophobicity and small flake size, which contributed to enhancing the capacitive properties of the material in ionic liquid electrolyte.


  • Pseudocapacitive Charge Storage in MXene–V2O5 for Asymmetric Flexible Energy Storage Devices

    by Aniu Qian, Yiwei Pang, Guangyu Wang, Yuehui Hao, Yiming Liu, Hu Shi, Chan-Hwa Chung, Zhiping Du, Fangqin Cheng

    Pseudocapacitive asymmetric supercapacitors are promising candidates for achieving high energy density in flexible energy storage devices. However, seeking suitable positive electrode materials that are compatible with negative electrode materials remains a considerable challenge. In the current study, a pseudocapacitive Ti3C2Tx MXene used as negative electrodes is rationally compatible with redox-type V2O5 as positive electrodes, resulting in the assembly of an all-pseudocapacitive Ti3C2Tx MXene//V2O5 asymmetric flexible energy storage device. The solid-state asymmetric device can deliver an energy density of 8.33 mW h cm–3 at a current density of 0.5 A g–1. Moreover, it can operate in an expanded voltage window of 1.5 V, with dominant surface-capacitive charge-storage mechanisms. Additionally, the device can power a yellow light-emitting diode for up to 7 s, indicating the potential of the device for use in practical applications. This study demonstrates the possibility of using other two-dimensional transition-metal carbide nanosheets for high-energy density flexible energy storage devices.