Khalid A. Juhany
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Khalid A. Juhany has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Amjad Ali Pasha
Aerospace Engineering Department, King Abdulaziz University, Jeddah, Saudi Arabia
3 shared publications - Mahmood Khalid
Department of Aeronautical Engineering, King Abdulaziz University, Jeddah 21589, Saudi Arabia
3 shared publications - Abdul Gani Abdul Jameel
Department of Chemical Engineering, King Fahd University of Petroleum & Minerals, Dhahran 31261, Saudi Arabia
2 shared publications V. Mahendra Reddy
Department of Mechanical Engineering, Indian Institute of Technology Kharagpur, Kharagpur, India
2 shared publicationsAakhash Sundaresan
Turbulence and Flow Control Laboratory, School of Mechanical Engineering, SASTRA Deemed University, Thanjavur, Tamil Nadu, India
1 shared publicationAbdul Zubar Hameed
Department of Industrial Engineering, Faculty of Engineering, King Abdulaziz University, Jeddah, Saudi Arabia
1 shared publication
Latest Publications
- 22 August 2023
- Published by Cambridge University Press (CUP) in The Aeronautical Journal
- Vol. 128 (1321) , 547-558
Effects of blowing upon dynamic stability of blunt nosed re entry vehicles pitching in hypersonic flow
Blowing is often used to alleviate the intense heating rates on blunt noses of hypersonic vehicles. This flow efflux at the leading edge transforms the flow field in the blunt-nose regions with implications on the dynamic stability of the vehicles. As a demonstrative exercise, the flow fields past blunt-nosed and truncated-nosed conical bodies under blowing and no-blowing conditions were perturbed to obtain the unsteady effects using the shock expansion method to recover the unsteady pressure coefficient. Static and pitching moment derivatives were then duly obtained by integrating the differential of the unsteady pressure coefficient with respect to the pitch angle (α) or the pitch rate ( $\dot \theta $ ) together with the moment arm with reference to the centre of gravity. The results obtained for blunt-nose and truncated conical bodies show a noticeable drop in dynamic stability. Even when the flow is transformed from a tangential blowing at the shoulder of the blunt-nosed vehicle shows some degradation in dynamic stability.- 22 August 2023
- Published by Cambridge University Press (CUP) in The Aeronautical Journal
- Vol. 128 (1321) , 547-558
Effects of blowing upon dynamic stability of blunt nosed re entry vehicles pitching in hypersonic flow
Blowing is often used to alleviate the intense heating rates on blunt noses of hypersonic vehicles. This flow efflux at the leading edge transforms the flow field in the blunt-nose regions with implications on the dynamic stability of the vehicles. As a demonstrative exercise, the flow fields past blunt-nosed and truncated-nosed conical bodies under blowing and no-blowing conditions were perturbed to obtain the unsteady effects using the shock expansion method to recover the unsteady pressure coefficient. Static and pitching moment derivatives were then duly obtained by integrating the differential of the unsteady pressure coefficient with respect to the pitch angle (α) or the pitch rate ( $\dot \theta $ ) together with the moment arm with reference to the centre of gravity. The results obtained for blunt-nose and truncated conical bodies show a noticeable drop in dynamic stability. Even when the flow is transformed from a tangential blowing at the shoulder of the blunt-nosed vehicle shows some degradation in dynamic stability.- 2 October 2021
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 47 (7) , 8243-8256
Numerical Analysis to Evaluate the Effect of Wall Temperature on Skin Friction and Stanton Number for Turbulent Flows over a Flat Plate from Mach 2–8
- 2 October 2021
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 47 (7) , 8243-8256
Numerical Analysis to Evaluate the Effect of Wall Temperature on Skin Friction and Stanton Number for Turbulent Flows over a Flat Plate from Mach 2–8
- Open Access
- 9 August 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 114441-114456
Estimation of Chaotic Surface Pressure Characteristics of Ice Accreted Airfoils–A 0–1 Test Approach
Airfoils have their respective applications in almost every engineering field ranging from wind turbine blades, aircraft, and cooling fans to sophisticated electronic components. Thus, the flow over the airfoils is of primary focus to engineers in developing appropriate applications to meet the current standards in technology as well as demands. However, the underlying surface pressure characteristics need significant attention to understand the flow over airfoils completely. Generally, the flow over an airfoil and the time series pressure on the surface is linear and hence the aerodynamic forces are considered to be linear. But as the flow is perturbed due to external disturbances, nonlinearities creep in, and the surface pressure characteristics exhibit nonlinear behaviour. The ice accretion on the leading edge of the airfoil was witnessed to be an opportunity to investigate the nonlinear surface pressure characteristics. The current experimental study aims to investigate the dynamics of the surface pressure characteristics of four distinct ice geometries on the NACA0012 airfoil at a Reynolds number of 2×10 5 . The angle of attack of the airfoil was varied from 0° to 24° with an increment of 3°. The 0-1 test for chaos was applied to the ice accreted airfoils at all the pressure ports on the suction surface of the airfoil. The test gives a single value for K, known as the asymptotic growth rate of the mean squared displacement. The value of K = 0 implies that the underlying dynamics could be periodic and when the value of K = 1, the underlying dynamics show aperiodicity and hence chaos. The horn iced airfoil performed significantly weaker compared to other ice accretion geometries because a significantly higher amount of chaos was produced in the flow field due to the presence of a geometry resembling a separation bubble. This aided in the substantial increment in drag and loss of lift for the horn ice accreted airfoil.
- 9 August 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 114441-114456
Open AccessEstimation of Chaotic Surface Pressure Characteristics of Ice Accreted Airfoils–A 0–1 Test Approach
Airfoils have their respective applications in almost every engineering field ranging from wind turbine blades, aircraft, and cooling fans to sophisticated electronic components. Thus, the flow over the airfoils is of primary focus to engineers in developing appropriate applications to meet the current standards in technology as well as demands. However, the underlying surface pressure characteristics need significant attention to understand the flow over airfoils completely. Generally, the flow over an airfoil and the time series pressure on the surface is linear and hence the aerodynamic forces are considered to be linear. But as the flow is perturbed due to external disturbances, nonlinearities creep in, and the surface pressure characteristics exhibit nonlinear behaviour. The ice accretion on the leading edge of the airfoil was witnessed to be an opportunity to investigate the nonlinear surface pressure characteristics. The current experimental study aims to investigate the dynamics of the surface pressure characteristics of four distinct ice geometries on the NACA0012 airfoil at a Reynolds number of 2×10 5 . The angle of attack of the airfoil was varied from 0° to 24° with an increment of 3°. The 0-1 test for chaos was applied to the ice accreted airfoils at all the pressure ports on the suction surface of the airfoil. The test gives a single value for K, known as the asymptotic growth rate of the mean squared displacement. The value of K = 0 implies that the underlying dynamics could be periodic and when the value of K = 1, the underlying dynamics show aperiodicity and hence chaos. The horn iced airfoil performed significantly weaker compared to other ice accretion geometries because a significantly higher amount of chaos was produced in the flow field due to the presence of a geometry resembling a separation bubble. This aided in the substantial increment in drag and loss of lift for the horn ice accreted airfoil.
- 20 May 2020
- Published by Taylor & Francis in International Journal of Systems Science
- Vol. 51 (9) , 1528-1541
Distributed cooperative control for nonholonomic wheeled mobile robot systems
The purpose of this paper is two-fold. First, the smoothness of the distributed consensus control (DCC) protocols of multi-agent systems (MAS) with inherent nonlinear dynamics is investigated. Different from the traditional consensus protocols where variable structure control is considered for robust control, a continuous DCC is presented to achieve consensus tracking without control chattering. Using certain types of exponential functions, it is shown that different smooth DCC schemes can be constructed to achieve asymptotic consensus tracking with smooth control input for MAS with connected directed/undirected and fixed/switched communication topologies. Second, the formation control problem of nonholonomic wheeled mobile robots (WMR) is solved via the continuous DCC. By converting the formation problem into consensus problem using the agents’ kinematics, the formation speed-control problem in planar motion is formulated and solved. The translational and rotational speeds inputs to the WMR are computed using continuous distributed consensus protocols to reduce chattering in the control inputs of mobile robots. The distinctive feature of the proposed consensus and formation algorithms is the high tracking precision with smooth control input to agents’ dynamics. In simulation studies, different numerical examples are illustrated to demonstrate the performance and effectiveness of the proposed DCC.
- 20 May 2020
- Published by Taylor & Francis in International Journal of Systems Science
- Vol. 51 (9) , 1528-1541
Distributed cooperative control for nonholonomic wheeled mobile robot systems
The purpose of this paper is two-fold. First, the smoothness of the distributed consensus control (DCC) protocols of multi-agent systems (MAS) with inherent nonlinear dynamics is investigated. Different from the traditional consensus protocols where variable structure control is considered for robust control, a continuous DCC is presented to achieve consensus tracking without control chattering. Using certain types of exponential functions, it is shown that different smooth DCC schemes can be constructed to achieve asymptotic consensus tracking with smooth control input for MAS with connected directed/undirected and fixed/switched communication topologies. Second, the formation control problem of nonholonomic wheeled mobile robots (WMR) is solved via the continuous DCC. By converting the formation problem into consensus problem using the agents’ kinematics, the formation speed-control problem in planar motion is formulated and solved. The translational and rotational speeds inputs to the WMR are computed using continuous distributed consensus protocols to reduce chattering in the control inputs of mobile robots. The distinctive feature of the proposed consensus and formation algorithms is the high tracking precision with smooth control input to agents’ dynamics. In simulation studies, different numerical examples are illustrated to demonstrate the performance and effectiveness of the proposed DCC.
- 15 November 2018
- Published by Cambridge University Press (CUP) in The Aeronautical Journal
- Vol. 122 (1257) , 1673-1696
Heat alleviation studies on hypersonic re-entry vehicles
A numerical simulation has been carried out to investigate the effects of leading edge blowing upon heat alleviation on the surface of hypersonic vehicles. The initial phase of this work deals with the ability of the present CFD-based techniques to solve hypersonic flow field past blunt-nosed vehicles at hypersonic speeds. Towards this end, the authors selected three re-entry vehicles with published flow field data against which the present computed results could be measured. With increasing confidence on the numerical simulation techniques to accurately resolve the hypersonic flow, the boundary condition at the solid blunt surface was then equipped with the ability to blow the flow out of the solid boundary at a rate of at least 0.01–0.1 times the free stream (ρ∞u∞) mass flow rate. The numerical iterative procedure was then progressed until the flow at the surface matched this new ‘inviscid like’ boundary condition. The actual matching of the flow field at the ejection control surface was achieved by iterating the flow on the adjacent cells until the flow conformed to the conditions prescribed at the control surface. The conditions at the surface could be submitted as a ρ∞u∞at the surface or could be equipped as a simple static pressure condition providing the desired flow rate. The comparison between the present engineering approach and the experimental data presented in this study demonstrate its ability to solve complex problems in hypersonic.
- 15 November 2018
- Published by Cambridge University Press (CUP) in The Aeronautical Journal
- Vol. 122 (1257) , 1673-1696
Heat alleviation studies on hypersonic re-entry vehicles
A numerical simulation has been carried out to investigate the effects of leading edge blowing upon heat alleviation on the surface of hypersonic vehicles. The initial phase of this work deals with the ability of the present CFD-based techniques to solve hypersonic flow field past blunt-nosed vehicles at hypersonic speeds. Towards this end, the authors selected three re-entry vehicles with published flow field data against which the present computed results could be measured. With increasing confidence on the numerical simulation techniques to accurately resolve the hypersonic flow, the boundary condition at the solid blunt surface was then equipped with the ability to blow the flow out of the solid boundary at a rate of at least 0.01–0.1 times the free stream (ρ∞u∞) mass flow rate. The numerical iterative procedure was then progressed until the flow at the surface matched this new ‘inviscid like’ boundary condition. The actual matching of the flow field at the ejection control surface was achieved by iterating the flow on the adjacent cells until the flow conformed to the conditions prescribed at the control surface. The conditions at the surface could be submitted as a ρ∞u∞at the surface or could be equipped as a simple static pressure condition providing the desired flow rate. The comparison between the present engineering approach and the experimental data presented in this study demonstrate its ability to solve complex problems in hypersonic.
- Open Access
- 1 January 2018
- Published by Taylor & Francis in Engineering Applications of Computational Fluid Mechanics
- Vol. 12 (1) , 459-472
Numerical prediction of shock/boundary-layer interactions at high Mach numbers using a modified Spalart–Allmaras model
The Reynolds-averaged Navier–Stokes equations with one-equation turbulence models are used to simulate the flow field past a cone–flare geometry in the Mach number range from 5 to 8 with emphasis on the interaction region of the flare shock with the upstream boundary layer. A model based on the physics of shock unsteadiness is used to correct the standard Spalart–Allmaras turbulence model to improve the prediction of the extent of the separation bubble arising from the shock/turbulent boundary-layer interaction and its accompanying peak pressure and aerothermal loads on the surface. The computed results are validated against the experimental data. The limitations of the shock-unsteadiness model and the extent of the improvement in predicting the heat flux are discussed.
- 1 January 2018
- Published by Taylor & Francis in Engineering Applications of Computational Fluid Mechanics
- Vol. 12 (1) , 459-472
Open AccessNumerical prediction of shock/boundary-layer interactions at high Mach numbers using a modified Spalart–Allmaras model
The Reynolds-averaged Navier–Stokes equations with one-equation turbulence models are used to simulate the flow field past a cone–flare geometry in the Mach number range from 5 to 8 with emphasis on the interaction region of the flare shock with the upstream boundary layer. A model based on the physics of shock unsteadiness is used to correct the standard Spalart–Allmaras turbulence model to improve the prediction of the extent of the separation bubble arising from the shock/turbulent boundary-layer interaction and its accompanying peak pressure and aerothermal loads on the surface. The computed results are validated against the experimental data. The limitations of the shock-unsteadiness model and the extent of the improvement in predicting the heat flux are discussed.