DWDwiprayogo Wibowo

Dwiprayogo Wibowo

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Dwiprayogo Wibowo has a total of 119 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Comprehensive Slope Stability Analysis: Floods and Rapid Drawdown Triggered Road Slope Instability (A Case Study)

    by Edward Ngii, Anafi Minmahddun, Suyuti Suyuti, Uniadi Mangidi, Fathur Rahman Rustan, Dwiprayogo Wibowo, Muhammad Nurdin

    The risks of erosion to road embankments due to increased river water volume, particularly during flood events, often disrupt economic activities such as food and clothing distribution between locations. Therefore, this research investigated the critical impact of rapid drawdown on slope stability for road infrastructure adjacent to the Laeya River in Southeast Sulawesi, Indonesia. To achieve this aim, a comprehensive two-stage method was adopted, and the first included hydrological analysis to simulate flood water levels and predict rapid drawdown scenarios. In the second stage, a detailed geotechnical analysis through finite element method (FEM) was used to assess the stability of the slopes. Consequently, the research findings showed essential safety factor (SF) values under various conditions. The initial SF for the existing condition was 1.20, but after implementing treatment measures, such as slope geometry modification and soil compaction, the value improved to 1.54. However, during flood water level conditions, SF decreased to 1.50 due to the submergence of the slope base. Observation showed that rapid drawdown conditions led to a critical reduction in SF to 1.22, signifying the need for further research on the implications of drawdown. This research provided valuable perceptions and engineering solutions for improving slope stability in river-adjacent road infrastructure.


  • Open Access

    Model of Dynamics System-based Waste Generation, Planning, and Community Social Acceptance of the Reuse, Reduce, and Recycle Waste Management Site (3R WPS)

    by Dwiprayogo Wibowo, Hendrik Ermawan, Wa Ndibale, Ilham Ilham

    An increase in population leads to an increase in waste generation, which has the potential to cause negative impacts on health and the environment. Waste management in rural areas is important to reduce air pollution due to waste burning and soil pollution, while providing economic value through the development of Reduce, Reuse, Recycle Waste Processing Site (3R WPS). This study aims to estimate waste generation using a dynamic system approach, design an environmentally based 3R WPS design, and evaluate the perception of social acceptance of the community in Pesue Village, Konawe Islands Regency, Southeast Sulawesi. The dynamic system approach was used to project the amount of waste, while the design of 3R WPS was designed using AutoCAD. The community's perception of the acceptability of 3R WPS was evaluated through a questionnaire survey. The simulation results show that the population growth of Pesue Village follows a sigmoid graph pattern in the 2021-2050 projection, and a linear pattern in the 2021-2030 period. The increase in population is in line with the increase in waste generation, which is depicted in a linear graph pattern. Simulation of waste management with 3R WPS shows that this facility can significantly reduce waste generation. The survey results show that the community supports the development of 3R WPS with the hope that waste management is carried out properly and sustainably. Implementation of the 3R principles (Reduce, Reuse, Recycle) is recommended to ensure environmentally friendly waste management, thus supporting the creation of a clean and healthy environment. Keywords: Waste, 3R WPS, Dynamical System, Population, Acceptability


  • Open Access

    Influence of Sorbitol and Glycerol on Physical and Tensile Properties of Biodegradable–Edible Film From Snakehead Gelatin and κ ‐Carrageenan

    by Rosmawati Rosmawati, Sri Fatmah Sari, Asnani Asnani, Wa Embe, Asjun Asjun, Dwiprayogo Wibowo, Irwan Irwan, Nurul Huda, Muhammad Nurdin, Akrajas Ali Umar

    Two plasticizers with distinct properties are carefully studied in this research for their suitability in creating biocomposite edible film products. The study uncovers films’ physical, tensile, and biodegradability attributes, using snakehead gelatin and ĸ‐carrageenan in different concentrations, with sorbitol or glycerol as plasticizers. The biomaterials of the edible film consist of snakehead gelatin ( Channa striata ) 2% ( w / v ); ĸ‐carrageenan at concentrations of 1%, 1.5%, and 2% ( w / v ); and sorbitol/glycerol 15% ( v / v ). The addition of ĸ‐carrageenan up to 2% in the formulation increased the film thickness to 0.046 ± 0.005 mm, tensile strength to 2.05 ± 0.56 MPa, and elongation at break to 35.00 % ± 2.92% while decreasing the water vapor transmission rate (WVTR) to 0.17 ± 0.00 g/mm 2 /h ( p < 0.05). The effect of glycerol in the composite did not affect thickness and luminosity ( L ∗ ) ( p > 0.05), but the tensile strength increased from 0.18 ± 0.17 to 1.03 ± 0.40 MPa ( p > 0.05). Sorbitol increased the value of color difference, elongation at break, and WVTR, namely, 19.77 ± 1.02, 25.20 % ± 1.79%, and 0.28 ± 0.02 g/mm 2 /h, respectively ( p < 0.05). The swelling index of the films increased with ĸ‐carrageenan concentration, whereas the water content decreased ( p < 0.05). The addition of sorbitol reduced the solubility of the film from 71.43 % ± 12.39% to 42.67 % ± 15.44% ( p < 0.05), while glycerol did not affect changes in film solubility ( p > 0.05). The presence of sorbitol had no significant effect on the contact angle ( p > 0.05) and was more affected by the addition of glycerol at higher ĸ‐carrageenan concentrations ( p < 0.05). The ability to decompose after 28 days was more remarkable for films containing glycerol than sorbitol. Fourier transform infrared analysis revealed the functional group structures of all samples, indicating that no new compounds were formed in them. The surface structure of the sorbitol‐plasticized film was predicted to be rougher and easily cracked, but more compact and dense, while the glycerol‐plasticized film tended to be smoother with fainter cracks due to its hygroscopic properties.


  • Analisis dan Pemetaan Pengaruh Kecepatan Kendaraan terhadap Tingkat Kebisingan di Kawasan Sekolah Dasar Kota Kendari, Sulawesi Tenggara

    by Herdin Herdin, Sumarlin Sumarlin, Ilham Ilham, Dwiprayogo Wibowo

    Kebisingan merupakan gelombang suara yang ditimbulkan dari sumber suara bergetar sehingga menimbulkan ketidaknyamanan bagi pendengarnya dan memiliki efek terhadap kesehatan. Aktivitas lalu lintas merupakan salah satu sumber kebisingan dan mengganggu kenyamanan anak-anak sekolah. Oleh sebab itu, penelitian ini bertujuan untuk menganalisis potensi kebisingan di sekolah dasar (SD) pada tepi jalan primer Kota Kendari secara matematis, kemudian memetakan hasil perhitungan kebisingan. Berdasarkan hasil penelitian menunjukkan bahwa hasil perhitungan Predicted Noise Level (PNL), potensi tingkat kebisingan tertinggi berada di SDN 7 Kendari sebesar 67,09 dB(A), SDN 37 Kendari sebesar 66,53 dB(A), SDN 6 Kendari sebesar 65,05 dB(A), SDN 2 Kendari sebesar 64,84 dB(A), SDN 30 Kendari sebesar 64,53 dB(A), dan SDN 28 Kendari sebesar 62,48 dB(A). Penyajian data dalam bentuk data spasial/peta sangat penting dilakukan ini karena lokasi penelitian yang banyak, dengan penyajian data dalam bentuk peta lebih memudahkan peneliti untuk menganalisis besar potensi kebisingan dengan membuat titik-titik, agar menjadi bahan acuan terhadap potensi besar PNL di Kota Kendari.

  • Open Access

    Dual-functional graphite/TiO2 nanocomposites for high-efficiently adsorption-photoelectrocatalytic degradation

    by Dwiprayogo Wibowo, Faizal Mustapa, Jamal Mukaddas, Toshiyuki Nakai, Resa Alfandi, Moch. Assidieq, Rosdiana Rosdiana, Nur Fitriana Muh. Ali, Andi Nafisah Tendri Adjeng, Muhammad Nurdin

    Dual-functional graphite/TiO2 (G/ TiO2) nanocomposites were successfully prepared by physical pressure to form tablet construction and adding the voltage d Dual-functional graphite/TiO2 (G/ TiO2) nanocomposites were successfully prepared by physical pressure to form tablet construction and adding the voltage d


  • Synergies and potential of hybrid solar photovoltaic for enhanced desalination: A review of selected countries

    by Dwiprayogo Wıbowo, Raldi Hendrotoro Seputro Koestoer

    In an effort to construct a desalination pilot plant, a study of several kinds of literature is needed to ensure Indonesia develops advanced and environmentally friendly desalination technology. This research aims to explore several research papers referenced in developing the desalination pilot plant to gain information on environmentally friendly and sustainable desalination technologies in selected countries such as Spain (Burriana), Mexico, Chile, the Philippines, and Iran (Kish Island), including in the Middle East and North Africa (MENA) region on the development of desalination technology for environmentally friendly and sustainable-based communities. This research used a systematic literature review (SLR) approach emphasizing secondary information from several studies based on selected countries to develop desalination technology. Each technology developed is examined for suitability with environmental conditions and desalination technology to be further applied in Indonesia. The main reason for building desalination plants in selected countries is to support sustainable development based on green energy and technology. They are combining desalination technology with photovoltaic (PV) electrical energy, which is a critical factor in promoting green technology through electrodialysis (ED) or reverse osmosis (RO) techniques. The developed desalination pilot plant can achieve 7-14 L/(m2.h) productivity at approximately 0.36-0.78 USD/m3. If implemented in Indonesia, it is necessary to prepare financial support to construct, operate, and maintain. Desalination technology in Indonesia should prioritize environmentally friendly technology. Indonesia's topographic region is a golden advantage to supporting sustainable green energy by utilizing PV-RO or PV-ED-RO to create fresh water from seawater.


  • Graphite Coupled with TiO2 Paste Photoelectrodes Well Oriented over COD Photoelectrocatalysis for Rapid Detection of Methylene Blue Organic Dye

    by Dwiprayogo Wibowo, La Pande Jurumai, Sintha Liawaty, Muhammad Ardi, Novita Rizki Rahmawati Saida, Rosdiana Rosdiana, Ilham Ilham, Faizal Mustapa, Muhammad Nurdin, Muhammad Kunta Biddinika


  • Open Access

    Beban Emisi Kendaraan Bermotor di Pelabuhan Ferry Amolengo Konawe Selatan, Sulawesi Tenggara

    by Dwiprayogo Wibowo, Muh. Risal B., Sumarlin Sumarlin, Ilham Ilham, Tia Dwi Irawandani

    The high number of vehicles crossing between islands through the ferry port has an impact on vehicle exhaust emissions during the queuing process for entering ships. This study aims to observe and analyze the prediction of motor vehicle emission loads at the Amolengo ferry port, South Konawe Regency, Southeast Sulawesi with analytical prediction studies and simple statistical data on possible vehicle emission estimates resulting from loading and unloading activities. Collecting research data by calculating the volume of vehicles and calculating the emission load with a percentage in terms of the density of the number of vehicles at the Amolengo Ferry Port. Statistical approach by calculating the arithmetic mean and standard deviation over day variables to obtain cumulative vehicle passing data. Based on these results, we calculated the volume of vehicle traffic passing through the Amolengo Ferry Port, South Konawe, as many as 147 vehicles/hour, 1411 vehicles/day, 515088 vehicles/year. Types of motorized vehicles carry out more activities and bus vehicles carry out fewer activities. The estimated annual emission load which is calculated based on the emission factor is known that the largest CO emission load is generated by gasoline-fueled cars of 5.05 tons/year and motorcycles of 4.37 tons/year. Meanwhile, the largest N2O emission load is generated by trucks, which is 0.0013 tons/year. This research provides that the statistical approach to determining the emission load certainly needs to be reviewed from the density of the number of vehicles to obtain an estimate of CO gas emissions.