TMTobias M. Müller

Tobias M. Müller

*This is an algorithmically generated author record based on publicly available information.

Tobias M. Müller has a total of 152 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Generalized Betti's Reciprocal Theorem for Quasistatic Linear Isotropic Poroelasticity

    by Pratap Sahay, Tobias Muller

    The Betti--Rayleigh reciprocity theorem is of fundamental importance in elastostatics, acoustics, and elastodynamics, and its extension to poroelasticity within the Biot theory has broadened its applicability. Despite its foundational status, the Biot theory has notable limitations: the strain in one phase does not induce a deformational force in the other phase, and a key kinematic variable, the porosity change, is not explicitly represented. Consequently, Biot-based reciprocity is limited to microhomogeneous porous media in which fractional changes in bulk, pore, and solid volumes are identical during an unjacketed compression test. To overcome these shortcomings, we deduce a generalized reciprocity theorem based on volume-averaged deformation and potential energy for both solid and fluid phases, explicitly incorporating porosity change as a kinematic variable. This generalized Betti reciprocity theorem applies to microinhomogeneous systems and includes the Biot theory-based reciprocity theorem as a special limiting case, providing a more rigorous framework for analyzing complex natural and engineered porous materials.

  • Open Access

    Laboratory and numerical experiments of wave propagation in media with fluid-filled fractures

    by Ana L. Ramos-Barreto, Tobias M. Müller, Rubén Rioyos-Romero, Jonas D. De Basabe


  • Open Access

    Macroscopic signatures of pore boundary motion due to intermittent fluid injection in porous medium

    by T M Müller, P N Sahay

    SUMMARY: Intermittent fluid injection aims at inferring and steering hydraulic transmissivity and has become an integral part of reservoir stimulation techniques. Modelling the poroelastic response of such pumping operations poses new challenges with respect to the hydromechanical coupling. This is because when a fluid pressure perturbation is introduced in the pore space of a deformable porous rock, it will induce a stress perturbation in the solid phase and this is accompanied by pore boundary motion. Within the limits of quasi-static linear poroelasticity, we analyse the macroscopic signatures of pore boundary motion during injection, that is, when the rock frame is mechanically loaded, and after injection stop, that is, when pore boundaries tend to relax back into equilibrium. We show that there is a pumping sequence that allows to harness the energy associated with pore boundary motion accumulated during the frame-loading cycle. Our results foster the need to distinguish how pressure diffusion in poroelastic solids proceeds: either fluid transport is of compressible or incompressible nature and the respective diffusion constant depends on undrained or drained poroelastic moduli.

  • Laboratory insights on acoustics of granular porous media with wettability changes

    by Yangpu Chen, Li-Yun Fu, Tobias M. Müller, Tongcheng Han, Jimmy Xuekai Li

    Elastic wave propagation in partially saturated porous rocks has been extensively addressed; however, the presence of fluids distributed over the pore surface at different degrees of wettability introduces additional complexities, which remain largely unexplored. We established an ultrasonic experimental basis for observing changes between hydrophilic and weakly hydrophilic conditions in partially saturated granular media. For this purpose, glass beads were silane treated to alternate the wettability condition. We validated our glass bead experimental system by measuring P-wave velocities under uniaxial pressure in dry condition and comparison with published data in almost-identical experimental conditions. For partially saturated bead packings, particular attention was paid to ensure uniform distribution of water throughout the pore space across different saturation levels. We measured the P- and S-wave velocities and attenuations with increasing saturation before and after chemical treatment, respectively. The results indicate that the silane treatment improves the water-bead coupling, leading to higher velocity and lower attenuation of coherent waves. We used a combination of the theories of Gassmann, Wood, and Walton to predict the velocity-saturation relation of coherent waves under different wettability conditions. Notably, after reaching a critical saturation, incoherent high-frequency waves were observed propagating with the speed predicted by Gassmann’s theory. The silane treatment reduced the amplitude of these incoherent waves to some degree, probably due to the improvement of water-bead coupling. We interpreted the observed coherent and incoherent waves in terms of the wettability-dependent ability for water to bridge neighboring beads. These liquid bridges create distinct force chain patterns, thereby altering wave transmissivity. Even though glass beads make up an idealized granular medium, our experimental findings lend support to a wave-based characterization of wettability changes in granular media.


  • Effect of fluid patch clustering on the P-wave velocity-saturation relation: A critical saturation model

    by Qiang Liu, Tobias M. Müller, Reza Rezaee, Yanli Liu, Danping Cao

    Quantitative analysis of the relationship between seismic wave velocities and fluid saturation in porous media is of great significance for any fluid injection and extraction operation in subsurface rock formations. However, seismic velocities are not only dependent on the amount of saturation but also on the distribution of fluid patches and their size. The patch-size variation during changes in saturation is often ignored in modeling studies even though it is natural to assume that with increasing saturation, fluid patches will form larger and, at some critical saturation, percolating clusters. To capture the evolution of patch size with saturation implied in the velocity-saturation relations (VSRs), we are inspired by percolation theory. By incorporating the connectivity of water-filled patches in a continuous random medium model, we develop a critical saturation model (CSM). We apply this CSM to examine recently reported experimental measurements, specifically analyzing the patch-size changes. For measurements of drainage or imbibition processes in four sandstone samples, we indeed find a clear indication of growing patch size with water saturation. The predictions of the CSM are in reasonable agreement with observations. Our approach improves the accuracy of the interpretation of the VSR in partially saturated rocks and forms a basis for exploring its underlying mechanisms.


  • Stress-dependent reflection and transmission of elastic waves under confining, uniaxial, and pure shear prestresses

    by Haidi Yang, Li-Yun Fu, Tobias M. Müller, Bo-Ye Fu

    Insights into the reflection and transmission (R/T) of waves at a prestressed interface are important in geophysical applications, such as evaluating the angle-dependent elastic properties for monitoring geopressure and tectonic stress using sonic logging data or seismic data. Although many studies deal with wave propagation in prestressed media, the angle-dependent R/T of waves at an interface subject to different prestress loading modes remains largely unaddressed. We address this issue by applying the theory of acoustoelasticity with third-order acoustoelastic constants to study the R/T coefficients at the interface between two prestressed media. Stress-induced elastic deformations are assumed to be locally homogeneous without boundary dislocations caused by stress concentration so that the static boundary conditions can be applied. We consider three typical prestress modes (confining, uniaxial, and pure shear), each of which takes into account the incidence of upgoing and downgoing P and S waves. The Knott equations under different types of prestresses are derived, followed by the estimation of angle-dependent R/T coefficients. The energy conservation at the interface and the acoustoelastic finite-difference simulation of predicted P and S modes verify the correctness of the angle-dependent R/T coefficients under confining prestress. Comparisons with the elastic case (prestress σ=0 MPa) indicate the important influence of prestresses on the energy distribution of reflected and transmitted waves, including stress-dependent critical angles, converted waves, and R/T energy ratios. Such acoustoelastic effects mainly occur around/after the critical angle. For small-angle incidence, prestresses mainly affect the gradient of R/T coefficients. The type and magnitude of prestress are closely related to the angle-dependent R/T coefficients and must be considered for amplitude-variation-with-offset analysis in prestressed media.


  • Open Access

    Period‐ and Pressure‐Dependent Hydraulic Properties of a Fractured Granite Inferred From Periodic Pumping Tests

    by Nicolás D. Barbosa, Victoria A. Jiménez Martínez, Nima Gholizadeh Doonechaly, Tobias M. Müller, Klaus Holliger

    Fractures can greatly impact fluid flow and pore pressure distribution in the upper crust. By conducting borehole hydraulic experiments, we can determine the ability of fractures to transport fluids and affect pressure diffusion under in situ conditions. We performed a series of periodic hydraulic tests in a borehole at the Bedretto Underground Laboratory for Geosciences and Geoenergies (Switzerland). We investigated the period‐ and pressure‐dependent response of a fractured granite by controlling the flow rate of harmonic and non‐harmonic oscillations, covering a wide range of periods as well as mean‐ and amplitude‐pressure values. By analyzing the phase and amplitude relation between the flow rate and fluid pressure in the injection interval, we found that the intersected fracture zone exhibits a period‐dependent hydraulic response close to radial flow perturbed by fracture‐related hydromechanical coupling effects. The main features of the interval's hydraulic response were reproduced by an uncoupled diffusion solution for radial flow, which was used to derive apparent hydraulic properties. The largest deviations from this model occur for the phase shifts and correlate with the pressure amplitude. This non‐linear expression of hydromechanical coupling associated with deformable fractures was interpreted in terms of a pressure‐dependent effective compliance of the fractures that affects their effective storativity. The period dependence is likely related to the spatial heterogeneity expected in fractured rocks and the varying sensitivity of the hydraulic response for different periods. Accounting for these effects is necessary for a correct hydraulic characterization in fractured environments and is valuable for inferring fracture mechanical behavior.


  • Open Access

    Editorial: Rock physics modeling and well-log practice for unconventional reservoirs

    by Qiaomu Qi, Lidong Dai, Maxim Lebedev, Tobias Müller, Junfang Zhang

    Editorial: Rock physics modeling and well-log practice for unconventional reservoirs


  • Wettability-dependent wave velocities and attenuation in granular porous media

    by Jimmy Xuekai Li, Reza Rezaee, Tobias M. Müller, Mahyar Madadi, Rupeng Ma, Mohammad Sarmadivaleh

    Understanding seismic wave propagation in granular porous media is important for subsurface characterization. The presence of fluids, their distribution, and the prevailing wettability condition result in additional complexities. Although it is known that wave propagation in dry granular porous media is dominated by the presence of force chains, their influence in (partially) saturated granular porous media with different wettability conditions remains largely unexplored. To make progress in this direction, we have designed laboratory experiments by combining core flooding and ultrasonic measurements in glass bead packings that are chemically treated to alternate the wettability. The P- and S-wave velocity-saturation relation and attenuation-saturation relation are retrieved from the waveforms for water- and gas-wetting samples. The results demonstrate that there is a transition from an attenuating but stable P-wave pulse at low and moderate saturation to a set of incoherently scattered waves at high saturation. The incoherent scattering in the gas-wetting case is negligibly small, whereas it is more pronounced in the water-wetting case. We interpret these observations in terms of the wettability-dependent ability for water to penetrate into grain contacts. In the water-wetting case, liquid bridges are thought to locally reinforce the force chains and to increase their characteristic length scale. This leads to an increase in P-wave velocity and promotes incoherent scattering because the ratio of dominant wavelength to characteristic length scale decreases. In the gas-wetting case, however, the presence of gas prevents the water from direct contact with the glass beads and therefore stops the formation and growth of the liquid bridges within the force-chain network.


  • Open Access

    Wettability-dependent Wave Velocities and Attenuation in Granular Porous Media

    by Jimmy Xuekai Li, Reza Rezaee, Tobias M. Müller, Mahyar Madadi, Rupeng Ma, Mohammad Sarmadivaleh

    Understanding wave propagation in granular sediments is important for subsurface characterization. The presence of fluid and wettability condition result in additional complexities. While it is known that wave propagation in dry granular porous media is dominated by the presence of force chains, their influence in (partially) saturated granular porous media with different wettability conditions remains largely unexplored. To make progress in this direction, we design laboratory experiments by combining core flooding and ultrasonic measurement in glassbead packings that are chemically treated to alternate the wettability. The P- and S-wave velocity-saturation relation and attenuation-saturation relation are obtained from the waveforms for both water- and gas-wetting samples. The results show that there is a transition from an attenuating but stable P-wave pulse at low and moderate saturation to a set of incoherently scattered waves at high saturation. The incoherent scattering in the gas-wetting case is negligibly small, whereas it is more pronounced in the water-wetting case. We conclude that only if water wets the grains, can the liquid enter the grain contacts. These liquid bridges are thought to locally reinforce the force chains and to increase their characteristic length scale. This leads to an increase in P-wave velocity and promotes incoherent scattering since the ratio of dominant wavelength to characteristic length scale decreases. In the gas wetting case, however, the presence of gas prevents the water from direct contact with the glass beads and therefore stops the formation and growth of the liquid bridges within the force chain network.