Osman Emre Özkan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Osman Emre Özkan has a total of 40 co-authors. Here are the top co-authors by number of shared publications:
- Mahmut Gür
Department of Forest Industrial Engineering, Forest Faculty, Kastamonu University, Kastamonu, Turkey
6 shared publications - Çağrı Olgun
Kastamonu Üniversitesi, Orman Fakültesi
4 shared publications Kerim Güney
3 shared publications- Alperen Kaymakci
Kastamonu Üniversitesi
2 shared publications - Hakan Aydoğan
Kastamonu Üniversitesi
2 shared publications Halit Muğlu
Department of Chemistry, Faculty of Art and Science Kastamonu University Kastamonu Turkey
2 shared publications
Latest Publications
- 23 October 2026
- Published by Springer Nature in European Journal of Wood and Wood Products
- Vol. 84 (6) , 154
Time-dependent reversal of water-absorption performance in citric acid–xylitol–modified Scots pine across processing pathways
- 23 October 2026
- Published by Springer Nature in European Journal of Wood and Wood Products
- Vol. 84 (6) , 154
Time-dependent reversal of water-absorption performance in citric acid–xylitol–modified Scots pine across processing pathways
- 21 August 2026
- Published by Springer Nature in European Journal of Wood and Wood Products
- Vol. 84 (5) , 118
Enhancement of fir and poplar wood properties with citric acid and polyols esterification
- 21 August 2026
- Published by Springer Nature in European Journal of Wood and Wood Products
- Vol. 84 (5) , 118
Enhancement of fir and poplar wood properties with citric acid and polyols esterification
- Open Access
- 28 July 2025
- Published by Instituto de Ecologia, A.C. in Madera y Bosques
- Vol. 31, e312519
Compression strength and thermal properties of Scots pine sapwood impregnated with nanoparticles of magnesium oxide and zinc oxide
This study aimed to investigate how nano-magnesium oxide (nano-MgO) and nano-zinc oxide (nano-ZnO) impregnation in Scots pine (Pinus sylvestris L.) wood with a solution of 0.1%, 0.2%, and 0.3% affects its physical, mechanical and thermal properties. The properties examined were density, retention value, compression strength, thermogravimetric analyses (TGA) and crystallinity index (CI) by using X-ray diffraction (XRD). In general, the mean compression strength parallel to the grain in the wood material increased when the quantity of nanoparticles of MgO added to impregnation solution increased from 0.1% to 0.3%, whereas it decreased in the case of nano-ZnO addition into the solution. The thermal stability of the nano-MgO and nano-ZnO treated Scots pine wood were better than untreated ones. In general, the CI of the specimens increased with increasing content of the nano-MgO and nano-ZnO. This study provides an overview of the advantages of using nano-ZnO and nano-MgO as impregnating agents to improve the properties of wood.
- 28 July 2025
- Published by Instituto de Ecologia, A.C. in Madera y Bosques
- Vol. 31, e312519
Open AccessCompression strength and thermal properties of Scots pine sapwood impregnated with nanoparticles of magnesium oxide and zinc oxide
This study aimed to investigate how nano-magnesium oxide (nano-MgO) and nano-zinc oxide (nano-ZnO) impregnation in Scots pine (Pinus sylvestris L.) wood with a solution of 0.1%, 0.2%, and 0.3% affects its physical, mechanical and thermal properties. The properties examined were density, retention value, compression strength, thermogravimetric analyses (TGA) and crystallinity index (CI) by using X-ray diffraction (XRD). In general, the mean compression strength parallel to the grain in the wood material increased when the quantity of nanoparticles of MgO added to impregnation solution increased from 0.1% to 0.3%, whereas it decreased in the case of nano-ZnO addition into the solution. The thermal stability of the nano-MgO and nano-ZnO treated Scots pine wood were better than untreated ones. In general, the CI of the specimens increased with increasing content of the nano-MgO and nano-ZnO. This study provides an overview of the advantages of using nano-ZnO and nano-MgO as impregnating agents to improve the properties of wood.
- Open Access
- 1 April 2023
- Published by Universidad del Bio Bio in Maderas. Ciencia y Tecnología
- Vol. 25
Effect of ultra-low temperature on some mechanical properties of painted and film-coated plywood
Plywood is used for insulation systems in liquid natural gas cargo ships because of its good thermal properties. However, there are only a few research investigating the mechanical properties of plywood exposed to ultra-low temperatures. This study aims to determine how plywood reacts when exposed to ultra-low temperatures, such as - 196 °C. To achieve this purpose, the present study investigated the bending strength, modulus of elasticity, and tensile-shear strength of painted and film-coated plywood under ultra-low temperatures. The mechanical properties of plywood were discovered to be significantly impacted by the ultra-low temperature as a result of this research. Moreover, not only the bending strength of the painted and film-coated plywood increased with decreasing temperature, but also the modules of elasticity of the painted and film-coated plywood increased. At decreasing temperature, the tensile shear strength of the painted and film-coated oven-dried plywood increased, but the ensile-shear strength of painted and film-coated air-dried plywood decreased. The tensile shear strength of air-dried plywood was determined to be more sensitive to the temperature change. Therefore, attention should be paid to plywood used in liquefied natural gas cargo ships with high humidity.
- 1 April 2023
- Published by Universidad del Bio Bio in Maderas. Ciencia y Tecnología
- Vol. 25
Open AccessEffect of ultra-low temperature on some mechanical properties of painted and film-coated plywood
Plywood is used for insulation systems in liquid natural gas cargo ships because of its good thermal properties. However, there are only a few research investigating the mechanical properties of plywood exposed to ultra-low temperatures. This study aims to determine how plywood reacts when exposed to ultra-low temperatures, such as - 196 °C. To achieve this purpose, the present study investigated the bending strength, modulus of elasticity, and tensile-shear strength of painted and film-coated plywood under ultra-low temperatures. The mechanical properties of plywood were discovered to be significantly impacted by the ultra-low temperature as a result of this research. Moreover, not only the bending strength of the painted and film-coated plywood increased with decreasing temperature, but also the modules of elasticity of the painted and film-coated plywood increased. At decreasing temperature, the tensile shear strength of the painted and film-coated oven-dried plywood increased, but the ensile-shear strength of painted and film-coated air-dried plywood decreased. The tensile shear strength of air-dried plywood was determined to be more sensitive to the temperature change. Therefore, attention should be paid to plywood used in liquefied natural gas cargo ships with high humidity.
- Open Access
- 17 September 2022
- Published by Ormancilik Arastirma Dergisi in Ormancılık Araştırma Dergisi
- Vol. 9 (Özel Sayı) , 207-211
Ahşap malzemede aktif anti-bakteriyel özelliklerin defne ve kekik ekstraktları ile artırılması
Ahşap ürünler gün geçtikçe hayatımıza daha çok girmekle birlikte temas edilen ahşap yüzeylerin hijyenik olarak güvenli olup olmadığı ile ilgili bazı soru işaretlerini de beraberinde getirmektedir. Ahşap malzemenin pasif ve aktif olmak üzere iki farklı anti-bakteriyel özelliğinden bahsedilebilir. Burada, pasif anti-bakteriyel özellik ahşabın doğası gereği olan porozif yapısı ve higroskopisiteden kaynaklanmaktadır. Ancak, ahşabın aktif anti-bakteriyel özelliği ise odun içeriğinde bulunan ekstraktif maddeler ile ilişkilidir. Bu çalışmanın amacı, hijyenik açıdan hassas alanlarda kullanılmak üzere defne (Laurus nobilis) ve kekik (Origanum onites) ekstraktları ile muamele edilmiş odunların anti-bakteriyel özelliklerinin direk difüzyon yöntemi ile incelenmesidir. Deneyleri gerçekleştirmek için 10 farklı bakteri suşu kullanılmıştır. Deneylerde kullanılan ahşap diskler aktif anti-bakteriyel özellikleri düşük kavak (Populus tremula) ağacından hazırlandıktan sonra otoklav ile sterilize edilmiştir. Bakteri suşları 0,5 McFarland’da hazırlanarak sürüntü sürme yöntemiyle Mueller-Hinton agar petri kaplarına aşılanmıştır. Daha sonra odun diskleri doğrudan aşılanmış agar üzerine yerleştirilmiştir. 37 °C’de 24 saat inkübasyondan sonra, disklerin etrafındaki agar üzerindeki inhibisyon bölgesi mm olarak not edilmiştir. Elde edilen sonuçlara göre, kavak odununa uygulanan kekik ekstraktlarının bakteriyel büyümeyi azalttığı tespit edilmiştir. Böylece, anti-bakteriyel özelliği düşük olan ağaç türlerinin kekik ekstraktları ile muamele edilerek hijyenik açıdan hassas alanlarda kullanımının olumlu sonuçlar vereceği tespit edilmiştir.
- 17 September 2022
- Published by Ormancilik Arastirma Dergisi in Ormancılık Araştırma Dergisi
- Vol. 9 (Özel Sayı) , 207-211
Open AccessAhşap malzemede aktif anti-bakteriyel özelliklerin defne ve kekik ekstraktları ile artırılması
Ahşap ürünler gün geçtikçe hayatımıza daha çok girmekle birlikte temas edilen ahşap yüzeylerin hijyenik olarak güvenli olup olmadığı ile ilgili bazı soru işaretlerini de beraberinde getirmektedir. Ahşap malzemenin pasif ve aktif olmak üzere iki farklı anti-bakteriyel özelliğinden bahsedilebilir. Burada, pasif anti-bakteriyel özellik ahşabın doğası gereği olan porozif yapısı ve higroskopisiteden kaynaklanmaktadır. Ancak, ahşabın aktif anti-bakteriyel özelliği ise odun içeriğinde bulunan ekstraktif maddeler ile ilişkilidir. Bu çalışmanın amacı, hijyenik açıdan hassas alanlarda kullanılmak üzere defne (Laurus nobilis) ve kekik (Origanum onites) ekstraktları ile muamele edilmiş odunların anti-bakteriyel özelliklerinin direk difüzyon yöntemi ile incelenmesidir. Deneyleri gerçekleştirmek için 10 farklı bakteri suşu kullanılmıştır. Deneylerde kullanılan ahşap diskler aktif anti-bakteriyel özellikleri düşük kavak (Populus tremula) ağacından hazırlandıktan sonra otoklav ile sterilize edilmiştir. Bakteri suşları 0,5 McFarland’da hazırlanarak sürüntü sürme yöntemiyle Mueller-Hinton agar petri kaplarına aşılanmıştır. Daha sonra odun diskleri doğrudan aşılanmış agar üzerine yerleştirilmiştir. 37 °C’de 24 saat inkübasyondan sonra, disklerin etrafındaki agar üzerindeki inhibisyon bölgesi mm olarak not edilmiştir. Elde edilen sonuçlara göre, kavak odununa uygulanan kekik ekstraktlarının bakteriyel büyümeyi azalttığı tespit edilmiştir. Böylece, anti-bakteriyel özelliği düşük olan ağaç türlerinin kekik ekstraktları ile muamele edilerek hijyenik açıdan hassas alanlarda kullanımının olumlu sonuçlar vereceği tespit edilmiştir.
- 14 September 2022
- Published by BioResources in BioResources
- Vol. 17 (4) , 6123-6130
Effect of freezing temperature on impact bending strength and shore-D hardness of some wood species
Wood is exposed to variable environmental conditions during its use. Low temperature is one of the most important environmental factors affecting the behavior of wood in use. Contrary to other mechanical properties, there are not enough studies on how the impact bending strength is affected during freezing of wood. This study evaluated the effect of various freezing temperatures (-20, -40, -78.5, and -196 °C) on the impact bending strengths of beech (Fagus orientalis Lipsky), Scotch pine (Pinus sylvestris L.), fir (Abies nordmanniana subsp. bornmulleriana), and spruce (Picea orientalis L.) wood in comparison with non-frozen wood (+20 °C). During the freezing, the impact bending strength generally increased in softwood species but decreased in hardwood. The highest drop in impact bending strength value of -30.6% was found at -196 °C for beech wood. For this reason, precautions should be taken when using beech wood at ultra-low temperatures, due to substantial decreases in impact bending strength values. The good impact bending strength properties of the softwood while frozen allows application in low temperature environments.
- 14 September 2022
- Published by BioResources in BioResources
- Vol. 17 (4) , 6123-6130
Effect of freezing temperature on impact bending strength and shore-D hardness of some wood species
Wood is exposed to variable environmental conditions during its use. Low temperature is one of the most important environmental factors affecting the behavior of wood in use. Contrary to other mechanical properties, there are not enough studies on how the impact bending strength is affected during freezing of wood. This study evaluated the effect of various freezing temperatures (-20, -40, -78.5, and -196 °C) on the impact bending strengths of beech (Fagus orientalis Lipsky), Scotch pine (Pinus sylvestris L.), fir (Abies nordmanniana subsp. bornmulleriana), and spruce (Picea orientalis L.) wood in comparison with non-frozen wood (+20 °C). During the freezing, the impact bending strength generally increased in softwood species but decreased in hardwood. The highest drop in impact bending strength value of -30.6% was found at -196 °C for beech wood. For this reason, precautions should be taken when using beech wood at ultra-low temperatures, due to substantial decreases in impact bending strength values. The good impact bending strength properties of the softwood while frozen allows application in low temperature environments.
- 28 March 2022
- Published by Walter de Gruyter GmbH in Holzforschung
- Vol. 76 (7) , 645-657
Effect of post-heat treatment on fire retardant treated wood properties
In this study, Anatolian black pine (Pinus nigra subsp. pallasiana) was treated with fire retardants of 10, 20, and 30% aqueous solutions composed of di-ammonium phosphate (DAP), borax, boric acid, and glucose to determine the effectiveness of these chemicals in preventing the spread of fire. The treated wood was subjected to post-heat treatment at 120, 150, and 180 °C for 1 h to examine the effects of the post-heat treatment on pH changes, anti-swelling efficiency, water absorption, mechanical strength, accelerated weathering, leaching resistance, thermogravimetric analysis (TGA), UL-94 vertical burning test and crystallinity index. The post-heat treatment of fire-retardant treated wood reduced water intake and increased dimensional stability, while also improving mechanical and thermal properties in general. DAP/glucose complexes promote phosphorus fixation in wood and reduce leaching, resulting in long-term fire protection of wood in service. Because of these improvements in the post-heat treated wood by impregnated fire retardant, it can potentially be used as a reliable engineering material in a wide range of structural applications.
- 28 March 2022
- Published by Walter de Gruyter GmbH in Holzforschung
- Vol. 76 (7) , 645-657
Effect of post-heat treatment on fire retardant treated wood properties
In this study, Anatolian black pine (Pinus nigra subsp. pallasiana) was treated with fire retardants of 10, 20, and 30% aqueous solutions composed of di-ammonium phosphate (DAP), borax, boric acid, and glucose to determine the effectiveness of these chemicals in preventing the spread of fire. The treated wood was subjected to post-heat treatment at 120, 150, and 180 °C for 1 h to examine the effects of the post-heat treatment on pH changes, anti-swelling efficiency, water absorption, mechanical strength, accelerated weathering, leaching resistance, thermogravimetric analysis (TGA), UL-94 vertical burning test and crystallinity index. The post-heat treatment of fire-retardant treated wood reduced water intake and increased dimensional stability, while also improving mechanical and thermal properties in general. DAP/glucose complexes promote phosphorus fixation in wood and reduce leaching, resulting in long-term fire protection of wood in service. Because of these improvements in the post-heat treated wood by impregnated fire retardant, it can potentially be used as a reliable engineering material in a wide range of structural applications.
- 3 January 2021
- Published by Springer Nature in European Journal of Wood and Wood Products
- Vol. 79 (2) , 417-421
Effects of cryogenic temperature on some mechanical properties of beech (Fagus orientalis Lipsky) wood
- 3 January 2021
- Published by Springer Nature in European Journal of Wood and Wood Products
- Vol. 79 (2) , 417-421
Effects of cryogenic temperature on some mechanical properties of beech (Fagus orientalis Lipsky) wood
- 29 September 2020
- Published by Kastamonu University in Kastamonu University Journal of Forestry Faculty
- Vol. 20 (2) , 200-207
Investigation of the Radiation Shielding Properties of Black Pine Wood Impregnated with Boric Acid
Aim of study: The present work is to investigate the radiation shielding properties of impregnated black pine (Pinus nigra Arnold subsp. pallasiana) wood material by measuring linear attenuations coefficient, mass attenuations coefficient, half value and tenth value layer thickness for different gamma energies from 5 keV to 1000 keV. Material and methods: The values of linear attenuation coefficient (1/cm), mass attenuation coefficient (cm2/g), half value and tenth value layer thickness of impregnated wood material were calculated in energy range between 5 to 1000 keV using the WinXCOM based Phy-X/PSD software and compared with concrete. Main results: It has been found that the linear attenuation coefficient and the mass attenuation coefficient of impregnated wood decrease as photon energy increases. But, half value layer and tenth value layer of impregnated wood increased as photon energy increased. As a result, it was found that the radiation shielding properties of wood increasing with boric acid impregnation. Highlights: The radiation shielding properties of impregnated wood are higher than pine wood because of its high density and chemical composition, which contains boron elements.
- 29 September 2020
- Published by Kastamonu University in Kastamonu University Journal of Forestry Faculty
- Vol. 20 (2) , 200-207
Investigation of the Radiation Shielding Properties of Black Pine Wood Impregnated with Boric Acid
Aim of study: The present work is to investigate the radiation shielding properties of impregnated black pine (Pinus nigra Arnold subsp. pallasiana) wood material by measuring linear attenuations coefficient, mass attenuations coefficient, half value and tenth value layer thickness for different gamma energies from 5 keV to 1000 keV. Material and methods: The values of linear attenuation coefficient (1/cm), mass attenuation coefficient (cm2/g), half value and tenth value layer thickness of impregnated wood material were calculated in energy range between 5 to 1000 keV using the WinXCOM based Phy-X/PSD software and compared with concrete. Main results: It has been found that the linear attenuation coefficient and the mass attenuation coefficient of impregnated wood decrease as photon energy increases. But, half value layer and tenth value layer of impregnated wood increased as photon energy increased. As a result, it was found that the radiation shielding properties of wood increasing with boric acid impregnation. Highlights: The radiation shielding properties of impregnated wood are higher than pine wood because of its high density and chemical composition, which contains boron elements.
- Open Access
- 1 March 2019
- Published by FapUNIFESP (SciELO) in CERNE
- Vol. 25 (1) , 36-43
COATING PERFORMANCES OF CRIMEAN JUNIPER (Juniperus excelsa M. BIEB.) WOOD
The purpose of this study is to determine the varnish layer hardness and varnish adhesion strength of the varnished Crimean juniper (Juniperus excelsa M. Bieb.) wood growing naturally in the Kastamonu region of Turkey. Test samples were varnished with UV-resistant polyurethane alkyd resin high gloss varnish (PAV) and water-based acrylic resin gloss varnish (WBAV). The varnish adhesion strength test was carried out by using universal testing machine. The varnish layer hardness was measured by using König pendulum hardness tester. Additionally, the colour properties were measured by spectrophotometer equipment that used the L*a*b* colour space. The adhesion strength of the polyurethane varnish and the water-based varnish were determined 2.81 MPa and 2.25 MPa respectively. Surface hardness value for water-based varnish and polyurethane varnish were determined 71 and 25 oscillation respectively. Detecting the performance of polyurethane and water-based varnish applications for the Crimean juniper wood will provide guidance in which type of varnish will be better for finishing. As a result, in varnish applications of the wood, it is recommended that water-based acrylic varnish should be applied when surface hardness is required. In addition, polyurethane alkyd varnish should be applied when better surface adhesion strength is desired.
- 1 March 2019
- Published by FapUNIFESP (SciELO) in CERNE
- Vol. 25 (1) , 36-43
Open AccessCOATING PERFORMANCES OF CRIMEAN JUNIPER (Juniperus excelsa M. BIEB.) WOOD
The purpose of this study is to determine the varnish layer hardness and varnish adhesion strength of the varnished Crimean juniper (Juniperus excelsa M. Bieb.) wood growing naturally in the Kastamonu region of Turkey. Test samples were varnished with UV-resistant polyurethane alkyd resin high gloss varnish (PAV) and water-based acrylic resin gloss varnish (WBAV). The varnish adhesion strength test was carried out by using universal testing machine. The varnish layer hardness was measured by using König pendulum hardness tester. Additionally, the colour properties were measured by spectrophotometer equipment that used the L*a*b* colour space. The adhesion strength of the polyurethane varnish and the water-based varnish were determined 2.81 MPa and 2.25 MPa respectively. Surface hardness value for water-based varnish and polyurethane varnish were determined 71 and 25 oscillation respectively. Detecting the performance of polyurethane and water-based varnish applications for the Crimean juniper wood will provide guidance in which type of varnish will be better for finishing. As a result, in varnish applications of the wood, it is recommended that water-based acrylic varnish should be applied when surface hardness is required. In addition, polyurethane alkyd varnish should be applied when better surface adhesion strength is desired.