Jianhua Zhou
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jianhua Zhou has a total of 67 co-authors. Here are the top co-authors by number of shared publications:
Hong Li
College of Bioresources Chemical and Materials Engineering, Shaanxi University of Science and Technology, Xi’an 710021, China
11 shared publicationsJiaojiao Zhao
College of Bioresources Chemical and Materials Engineering, Shaanxi University of Science and Technology, Xi’an 710021, China
10 shared publicationsXiang Li
College of Chemistry and Chemical Engineering, Shaanxi University of Science and Technology, Xi’an 710021, China
8 shared publicationsHongtao Yao
College of Bioresources Chemical and Materials Engineering, Shaanxi University of Science and Technology, Xi’an, China
7 shared publicationsJianzhong Ma
College of Bioresources Chemical and Materials EngineeringShaanxi University of Science and Technology Xi'an 710021 China
6 shared publications- Jianzhong Ma
College of Bioresources Chemical and Materials Engineering (College of Flexible Electronics), Shaanxi University of Science and Technology, Xi’an, China
6 shared publications
Latest Publications
- Open Access
- 29 September 2026
- Published by Elsevier in SSRN Electronic Journal
Flexible polyurethane solid–solid phase change material for effective solar-thermal energy storage, solar-thermal-electric conversion and selfhealing
Phase change materials (PCMs) hold considerable promise for thermal energy storage, yet issues such as leakage, inherent fragility, and low photothermal conversion efficiency have impeded their practical use. To overcome these challenges, researchers developed a straightforward yet effective approach for preparing a flexible polyurethane-derived solid-solid phase-change composite (CPUPCM). The resulting material enables efficient solar-to-thermal energy storage, solar-to-thermal-to-electricity conversion, and self-healing. CPUPCM was obtained by incorporating carbon nanotubes and 1,4benzoquinone dioxime as photothermal conversion materials into polyurethane synthesized from hexamethylene diisocyanate and polyethylene glycol. Experimental results revealed a phase change latent heat of 147.49 J/g, confirming the material’s superior thermal energy storage performance. CPUPCM exhibits outstanding photothermal conversion capability. Upon xenon lamp irradiation with an intensity of 150 mW·cm⁻², the surface temperature of the CPUPCM film reaches 167.4 ℃. The CPUPCM also exhibited favorable shape stability, cycling stability, and selfhealing capability. Furthermore, the solarthermalelectric conversion system assembled with CPUPCM achieves an efficient current output of 83.3 mA under irradiation by a xenon lamp at an intensity of 150 mW·cm⁻². Even after illumination was terminated, the phase change composite released its stored thermal energy to sustain output current output for a certain duration. Therefore, the asprepared composite PCMs feature high enthalpy, favorable leakage resistance, and efficient photothermal and solarthermalelectric conversion capabilities, showing promising prospects for practical solar energy collection, conversion, and storage.
- 29 September 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessFlexible polyurethane solid–solid phase change material for effective solar-thermal energy storage, solar-thermal-electric conversion and selfhealing
Phase change materials (PCMs) hold considerable promise for thermal energy storage, yet issues such as leakage, inherent fragility, and low photothermal conversion efficiency have impeded their practical use. To overcome these challenges, researchers developed a straightforward yet effective approach for preparing a flexible polyurethane-derived solid-solid phase-change composite (CPUPCM). The resulting material enables efficient solar-to-thermal energy storage, solar-to-thermal-to-electricity conversion, and self-healing. CPUPCM was obtained by incorporating carbon nanotubes and 1,4benzoquinone dioxime as photothermal conversion materials into polyurethane synthesized from hexamethylene diisocyanate and polyethylene glycol. Experimental results revealed a phase change latent heat of 147.49 J/g, confirming the material’s superior thermal energy storage performance. CPUPCM exhibits outstanding photothermal conversion capability. Upon xenon lamp irradiation with an intensity of 150 mW·cm⁻², the surface temperature of the CPUPCM film reaches 167.4 ℃. The CPUPCM also exhibited favorable shape stability, cycling stability, and selfhealing capability. Furthermore, the solarthermalelectric conversion system assembled with CPUPCM achieves an efficient current output of 83.3 mA under irradiation by a xenon lamp at an intensity of 150 mW·cm⁻². Even after illumination was terminated, the phase change composite released its stored thermal energy to sustain output current output for a certain duration. Therefore, the asprepared composite PCMs feature high enthalpy, favorable leakage resistance, and efficient photothermal and solarthermalelectric conversion capabilities, showing promising prospects for practical solar energy collection, conversion, and storage.
- Top Cited PapersOpen Access
- 10 March 2026
- Published by Springer Nature in Nano-Micro Letters
- Vol. 18 (1) , 278
Self-Sensing NiFe@N-doped Carbon Aerogel: Integrating Excellent Radar Stealth, Inherent Structural Health Monitoring, Thermal Management, and Flame Retardancy
Biomass carbon-based aerogels derived from collagen protofibrils are gaining considerable attention in electromagnetic protection. However, achieving a well-designed microstructure, optimized magnetic and dielectric loss components, and integrated multifunctionality within a single material system remains a significant challenge. Herein, a three-dimensional (3D) hierarchically biomimetic honeycomb-like porous magnetic NiFe@N-doped carbon aerogel (NFNCA) is obtained via a simple strategy involving in situ growth, freeze-drying, and pyrolysis carbonization. Driven by the synergy of a 3D conductive networking structure, magnetic and dielectric multi-components, numerous heterogeneous interfaces, and diverse loss pathways, the optimized NFNCA exhibits exceptional electromagnetic wave attenuation capability, evidenced by a minimum reflection loss ( R L ) of −53.49 dB at 1.93 mm and an effective absorption bandwidth of 6.24 GHz (11.76–18.00 GHz). Furthermore, the exceptional radar stealth, infrared thermal stealth, thermal management, and flame retardancy characteristics of NFNCA render it a promising candidate for multiple applications in demanding environments. Interestingly, the 3D cross-linked conductive network of NFNCA can serve as strain sensors to detect changes in the internal structure of carbon aerogels. Hence, this work provides a feasible design strategy for developing lightweight, high-efficiency, and multifunctional biomass-based carbon aerogel electromagnetic wave absorbing materials for various application scenarios.
- 10 March 2026
- Published by Springer Nature in Nano-Micro Letters
- Vol. 18 (1) , 278
Top Cited PapersOpen AccessSelf-Sensing NiFe@N-doped Carbon Aerogel: Integrating Excellent Radar Stealth, Inherent Structural Health Monitoring, Thermal Management, and Flame Retardancy
Biomass carbon-based aerogels derived from collagen protofibrils are gaining considerable attention in electromagnetic protection. However, achieving a well-designed microstructure, optimized magnetic and dielectric loss components, and integrated multifunctionality within a single material system remains a significant challenge. Herein, a three-dimensional (3D) hierarchically biomimetic honeycomb-like porous magnetic NiFe@N-doped carbon aerogel (NFNCA) is obtained via a simple strategy involving in situ growth, freeze-drying, and pyrolysis carbonization. Driven by the synergy of a 3D conductive networking structure, magnetic and dielectric multi-components, numerous heterogeneous interfaces, and diverse loss pathways, the optimized NFNCA exhibits exceptional electromagnetic wave attenuation capability, evidenced by a minimum reflection loss ( R L ) of −53.49 dB at 1.93 mm and an effective absorption bandwidth of 6.24 GHz (11.76–18.00 GHz). Furthermore, the exceptional radar stealth, infrared thermal stealth, thermal management, and flame retardancy characteristics of NFNCA render it a promising candidate for multiple applications in demanding environments. Interestingly, the 3D cross-linked conductive network of NFNCA can serve as strain sensors to detect changes in the internal structure of carbon aerogels. Hence, this work provides a feasible design strategy for developing lightweight, high-efficiency, and multifunctional biomass-based carbon aerogel electromagnetic wave absorbing materials for various application scenarios.
- 20 January 2026
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 342 (Pt 2) , 150381
Zein/chitosan complex particle-stabilized polyacrylate latex with high waterproof performance: A bio-based solution for paper food packaging
- 20 January 2026
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 342 (Pt 2) , 150381
Zein/chitosan complex particle-stabilized polyacrylate latex with high waterproof performance: A bio-based solution for paper food packaging
- 10 January 2026
- Published by Elsevier in Journal of Power Sources
- Vol. 667
Novel-designed octopus-like star-shaped binder for superior performance SiOx/C anodes in lithium-ion batteries
- 10 January 2026
- Published by Elsevier in Journal of Power Sources
- Vol. 667
Novel-designed octopus-like star-shaped binder for superior performance SiOx/C anodes in lithium-ion batteries
- 9 January 2026
- Published by Wiley in Macromolecular Rapid Communications
- Vol. 47 (4) , e00734
Photothermal Self‐Healing Waterborne Polyurethane with Antibacterial, Hydrophobic, and Oleophobic Properties Based on Dynamic Hindered Urea Bonds
To endow polyurethane coating with photothermal self‐healing, antibacterial, hydrophobic, and oleophobic properties, in this study, cellulose nanofiber coated with polydopamine and silver nanoparticles (CNF@PDA@AgNPs) and hindered urea bonds were introduced into fluorinated waterborne polyurethane as functional nanofillers and dynamic motifs, respectively. Owing to the remarkable photothermal property of CNF@PDA@AgNPs and the presence of dynamic hindered urea bonds, the photothermal self‐healing fluorinated waterborne polyurethane urea (PSF‐WPU) film exhibited excellent self‐healing capability. Under a xenon lamp irradiation with an intensity of 100 mW/cm 2 for 4 h, the self‐healing efficiency of its tensile strength and elongation at break reached 95.20% and 95.19% of its original properties, respectively. With the increase of CNF@PDA@AgNPs dosage, the water‐oil contact angles of the PSF‐WPU film increased. Furthermore, silver nanoparticles (AgNPs) as antibacterial agents endowed PSF‐WPU finished fabrics with excellent antibacterial properties, with 99.37% and 90.29% against E. coli and S. aureus , respectively. This work offers a feasible approach for fabricating self‐healing waterborne polyurethanes with outstanding photothermal antibacterial, mechanical, hydrophobic, and oleophobic performances that have great potential in the areas of coatings, textiles, leather, and biomedicine.
- 9 January 2026
- Published by Wiley in Macromolecular Rapid Communications
- Vol. 47 (4) , e00734
Photothermal Self‐Healing Waterborne Polyurethane with Antibacterial, Hydrophobic, and Oleophobic Properties Based on Dynamic Hindered Urea Bonds
To endow polyurethane coating with photothermal self‐healing, antibacterial, hydrophobic, and oleophobic properties, in this study, cellulose nanofiber coated with polydopamine and silver nanoparticles (CNF@PDA@AgNPs) and hindered urea bonds were introduced into fluorinated waterborne polyurethane as functional nanofillers and dynamic motifs, respectively. Owing to the remarkable photothermal property of CNF@PDA@AgNPs and the presence of dynamic hindered urea bonds, the photothermal self‐healing fluorinated waterborne polyurethane urea (PSF‐WPU) film exhibited excellent self‐healing capability. Under a xenon lamp irradiation with an intensity of 100 mW/cm 2 for 4 h, the self‐healing efficiency of its tensile strength and elongation at break reached 95.20% and 95.19% of its original properties, respectively. With the increase of CNF@PDA@AgNPs dosage, the water‐oil contact angles of the PSF‐WPU film increased. Furthermore, silver nanoparticles (AgNPs) as antibacterial agents endowed PSF‐WPU finished fabrics with excellent antibacterial properties, with 99.37% and 90.29% against E. coli and S. aureus , respectively. This work offers a feasible approach for fabricating self‐healing waterborne polyurethanes with outstanding photothermal antibacterial, mechanical, hydrophobic, and oleophobic performances that have great potential in the areas of coatings, textiles, leather, and biomedicine.
- 30 October 2025
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 7 (21) , 14303-14312
Water-Based Block Copolymer Binders for Stable and High-Performance Silicon-Based Lithium-Ion Battery Anodes
- 30 October 2025
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 7 (21) , 14303-14312
Water-Based Block Copolymer Binders for Stable and High-Performance Silicon-Based Lithium-Ion Battery Anodes
- 19 September 2024
- Published by Elsevier in Colloids and Surfaces A: Physicochemical and Engineering Aspects
- Vol. 703
Visible light-induced self-healing fluorinated polyurethane-acrylate containing aromatic Schiff base
- 19 September 2024
- Published by Elsevier in Colloids and Surfaces A: Physicochemical and Engineering Aspects
- Vol. 703
Visible light-induced self-healing fluorinated polyurethane-acrylate containing aromatic Schiff base