DKDong Min Kim

Dong Min Kim

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Dong Min Kim has a total of 32 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Revisiting the Shockley–Queisser Limit: Understanding Solar Cell Efficiency in One Sun and Indoor Environments

    by Hyun Woo Seo, Subarna Rudra, Solima Khanam, Subrata Sarker, Dong Min Kim

    We revisit the Shockley-Queisser limit (SQL) to adapt it for modern photovoltaic technologies and indoor illumination conditions. The original SQL, which models an ideal p-n junction as a blackbody (BB) illuminated by the sun as a BB, remains a theoretical benchmark but overlooks key loss mechanisms like nonradiative recombination. By reproducing the SQL and incorporating the external radiative efficiency (ERE), we quantify real-world efficiency losses. Our findings show that GaAs and perovskite solar cells, with minimal nonradiative losses, approach theoretical limits under both AM1.5G and indoor lighting. We also demonstrate that BB intensity─modulated by temperature or geometric factors─shifts optimal efficiency: lower BB temperatures cause a red shift, while reduced geometric factors induce a blue shift. Among artificial sources, LEDs and fluorescents offer the best performance at higher energies, whereas incandescent light favors lower energies. These results highlight the need to minimize nonradiative losses and tailor device design to specific spectral irradiance.


  • Open Access

    Innovative Hybrid Nanocomposites in 3D Printing for Functional Applications: A Review

    by Nguyen Thi Kim Tuyen, Dong Min Kim, Jung-Woo Lee, Jaehan Jung

    3D printing has garnered significant attention across academia and industry due to its capability to design and fabricate complex architectures. Applications such as those requiring intricate geometries or custom designs, including footwear, healthcare, energy storage, and electronics applications, greatly benefit from exploiting 3D printing processes. Despite the recent advancement of structural 3D printing, its use in functional devices remains limited, requiring the need for the development of functional materials suitable for 3D printing in device fabrication. In this review, we briefly introduce various 3D printing techniques, including material extrusion and vat polymerization, and highlight the recent advances in 3D printing for energy and biomedical devices. A summary of future perspectives in this area is also presented. By highlighting recent developments and addressing key challenges, this review aims to inspire future directions in the development of functional devices.


  • Open Access

    Low-Temperature Manufacture of Cubic-Phase Li7La3Zr2O12 Electrolyte for All-Solid-State Batteries by Bed Powder

    by Taehong Park, Sunho Lee, Dong-Min Kim

    As the demand for battery technology with enhanced safety and high energy density increases, solid-state batteries are currently attracting attention as a solution to problems such as fire and explosion risks associated with lithium-ion batteries. In this study, experiments were conducted to synthesize and optimize Li7La3Zr2O12 (LLZO), a solid electrolyte that is a key component of lithium-ion batteries with stability and high energy density. Experimental results showed that sintering at a low temperature of 800 °C for 8 h was the optimal synthesis and sintering time. Additionally, the excess lithium-containing bed powder enabled the production of pure cubic-phase LLZO. Through a sintering process that creates a lithium atmosphere on the bottom surface and facilitates lithium replenishment, an additional tunnel was introduced between the specimen and the alumina powder, allowing the bottom surface of the specimen to be exposed to the lithium atmosphere. By manufacturing a uniform cubic electrolyte, the path to manufacturing all-solid-state batteries was opened. These findings provide a new approach to forming cubic-phase LLZO with much higher ionic conductivity than the tetragonal phase at low sintering temperatures.


  • Open Access

    Supercapatteries as Hybrid Electrochemical Energy Storage Devices: Current Status and Future Prospects

    by Subarna Rudra, Hyun Woo Seo, Subrata Sarker, Dong Min Kim

    Among electrochemical energy storage (EES) technologies, rechargeable batteries (RBs) and supercapacitors (SCs) are the two most desired candidates for powering a range of electrical and electronic devices. The RB operates on Faradaic processes, whereas the underlying mechanisms of SCs vary, as non-Faradaic in electrical double-layer capacitors (EDLCs), Faradaic at the surface of the electrodes in pseudo-capacitors (PCs), and a combination of both non-Faradaic and Faradaic in hybrid supercapacitors (HSCs). EDLCs offer high power density but low energy density. HSCs take advantage of the Faradaic process without compromising their capacitive nature. Unlike batteries, supercapacitors provide high power density and numerous charge–discharge cycles; however, their energy density lags that of batteries. Supercapatteries, a generic term that refers to hybrid EES devices that combine the merits of EDLCs and RBs, have emerged, bridging the gap between SCs and RBs. There are numerous articles and reviews on EES, and many of those articles have emphasized various aspects of HSCs and supercapatteries. However, there are no recent reviews that dealt with supercapatteries in general. Here, we review recently published critically selected articles on supercapatteries. The review discusses different EES devices and how supercapatteries are different from others. Also discussed are properties, design strategies, and future perspectives on supercapatteries.


  • Open Access

    Supercapatteries as Hybrid Electrochemical Energy Storage Devices: Current Status and Future Prospects

    by Subarna Rudra, Hyun Woo Seo, Subrata Sarker, Dong Min Kim

    Among the electrochemical energy storage (EES) technologies, rechargeable batteries (RBs) and supercapacitors (SCs) are the two most desired candidates for powering a range of electrical and electronic devices. The RB operates on Faradaic processes, whereas the underlying mechanisms of the SC vary as non-Faradaic in the electrical double layer capacitors (EDLCs), Faradaic at the surface of the electrodes in the pseudo capacitors (PCs), and a combination of both non-Faradaic and Faradaic in the hybrid capacitors. The EDLCs offer high power density but low energy density. The hybrid capacitors take advantage of the Faradaic process without compromising their capacitive nature. Unlike batteries, supercapacitors provide high power density and numerous charge-discharge cycles; however, their energy density lags that of batteries. Here, we review recently published critically selected articles on supercapatteries, a generic term that refers to EES devices that can combine the merits of EDLCs and RBs. Also discussed are the properties, design strategies, and future perspectives of supercapatteries.


  • Reduced Graphene Oxide Screen-Printed FTO as Highly Sensitive Electrodes for Simultaneous Determination of Dopamine and Uric Acid

    by A. J. Saleh Ahammad, Tamanna Islam, Mahedi Hasan, M. N. Islam Mozumder, Rejwana Karim, Noyon Odhikari, Poly Rani Pal, Subrata Sarker, Dong Min Kim

    A novel electrochemical sensor was fabricated by simply screen printing reduced graphene oxide (rGO) paste on F-doped tin oxide (FTO) (rGO-SP-FTO) followed by sintering at 450°C in Argon and employed for detecting dopamine (DA) and uric acid (UA) simultaneously. The rGO film was characterized by using Raman spectroscopy, field emission scanning electron microscope (FE-SEM), and Fourier transform infrared spectroscopy (FTIR). The surface sensing features of rGO-SP-FTO were studied with electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The rGO-SP-FTO electrode exhibited foremost sensitivity in simultaneous detection of DA and UA without any interference from ascorbic acid (AA). The rGO-SP-FTO electrode showed a good linear response in the range of 0.5–50.0 μM and 5.0–300 μM with detection limits (S/N = 3) of 0.07 μM and 0.39 μM for DA and UA, respectively. The interactions between screen printed rGO with FTO electrode and their influence on how rGO-SP-FTO electrode interacted with UA, DA, and AA were analyzed from experimental observations. The rGO-SP-FTO electrode was able to detect DA in dopamine hydrochloride injection (DAI) and UA in urine sample effectively. Moreover, the designed electrochemical sensor exhibited excellent stability and reproducibility.


  • Step Flow Growth of SrRuO3 Thin Films on Vicinal (001) SrTiO3 Substrates by using RF-Magnetron Sputtering

    by Ki-Seong Lee, Young-Ku Jin, Dong Min Kim

    Epitaxial SrRuO3 thin films were fabricated on (001) SrTiO3 substrates by using radio-frequency (RF) magnetron sputtering. The films were deposited on (001) SrTiO3 substrates with a 0.1°, 0.2°, 0.5° or 1.0° miscut angle. The fabrication temperatures of the SrRuO3 thin films were changed in the range of 500-650 °C for the miscut 0.1° (001) SrTiO3 substrates. X-ray diffraction confirmed cube-on-cube epitaxial structures of the SrRuO3 thin films on (001) SrTiO3. According to the atomic force microscopy (AFM) images, the SrRuO3 thin films, which had been deposited on miscut 0.1° (001) SrTiO3, grew by step flow along the miscut direction of the substrate. In case of higher miscut angle, the step height was higher than that of a single unit cell of SrRuO3 due to the step bunching process. The SrRuO3 thin films grown at 500 °C showed an island growth mode and those grown at temperatures higher than 550 °C showed a step flow growth mode.