Dingliang Wen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Dingliang Wen has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
Hai Zhou
Huawei Technologies (UK) CO., LTD, Reading, Berkshire, U.K.
5 shared publicationsHanyang Wang
Huawei Technologies (UK) CO., LTD, Reading, Berkshire, U.K.
5 shared publications- Yang Hao
School of Electronic Engineering and Computer Science, Queen Mary University of London, London, UK
5 shared publications Dong-Ze Zheng
School of Electronic and Information Engineering, South China University of Technology, Guangzhou, China
2 shared publications- Hai Zhou
Terminal Antenna Department, Huawei Technologies (UK) Co., Ltd., Reading RG6 1PT, UK
1 shared publication - Hanyang Wang
Huawei Technologies (U.K.) Ltd., Abingdon, U.K.
1 shared publication
Latest Publications
- 6 December 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 67 (3) , 1437-1447
Design of a MIMO Antenna With High Isolation for Smartwatch Applications Using the Theory of Characteristic Modes
This paper describes the design and testing of a MIMO antenna for metal-frame smartwatch applications. The antenna operates from 2.4 to 2.49 GHz, which can cover Bluetooth/WiFi band. The design procedure is based on the theory of characteristic modes and it is discussed thoroughly. By employing a pair of degenerated modes to design the MIMO antenna, a high port-to-port isolation can be achieved over the operating frequency band. Simulated and measured results are presented to verify the antenna design. Furthermore, the antenna has a low envelope correlation coefficient and a high effective diversity gain even when it is mounted on the human phantom. Hence, the proposed antenna proves to be a good candidate for smartwatch applications.
- 6 December 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 67 (3) , 1437-1447
Design of a MIMO Antenna With High Isolation for Smartwatch Applications Using the Theory of Characteristic Modes
This paper describes the design and testing of a MIMO antenna for metal-frame smartwatch applications. The antenna operates from 2.4 to 2.49 GHz, which can cover Bluetooth/WiFi band. The design procedure is based on the theory of characteristic modes and it is discussed thoroughly. By employing a pair of degenerated modes to design the MIMO antenna, a high port-to-port isolation can be achieved over the operating frequency band. Simulated and measured results are presented to verify the antenna design. Furthermore, the antenna has a low envelope correlation coefficient and a high effective diversity gain even when it is mounted on the human phantom. Hence, the proposed antenna proves to be a good candidate for smartwatch applications.
- 6 November 2018
- Published by Wiley in Microwave and Optical Technology Letters
- Vol. 61 (2) , 513-518
Design of a wideband antenna by manipulating characteristic modes of a metallic loop
- 6 November 2018
- Published by Wiley in Microwave and Optical Technology Letters
- Vol. 61 (2) , 513-518
Design of a wideband antenna by manipulating characteristic modes of a metallic loop
- 28 May 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 66 (8) , 4387
Corrections to “Design of a Wideband Antenna With Stable Omnidirectional Radiation Pattern Using the Theory of Characteristic Modes” [May 17 2671-2676]
In [1] , there are some mistakes in the antenna dimensions in Fig. 1 on page 2672 and Fig. 11 on page 2674. These two figures should be corrected as follows:
- 28 May 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 66 (8) , 4387
Corrections to “Design of a Wideband Antenna With Stable Omnidirectional Radiation Pattern Using the Theory of Characteristic Modes” [May 17 2671-2676]
In [1] , there are some mistakes in the antenna dimensions in Fig. 1 on page 2672 and Fig. 11 on page 2674. These two figures should be corrected as follows:
- 1 January 2018
- Published by Institution of Engineering and Technology (IET)
Design of A Compact and Low-Profile Wearable MIMO Antenna for Wireless Personal Area Networks
A novel wearable multiple input multiple output (MIMO) antenna using a circular high-impedance surface (HIS) is proposed in this paper for wireless personal area networks (WPANs). The antenna can operate from 2.4 to 2.49 GHz with a good port-to-port isolation (>15 dB). A pair of degenerated characteristic modes of a circular loop antenna are utilized to design the MIMO antenna, which makes the antenna much more compact than other artificial magnetic conductor (AMC) based MIMO antennas developed by using two independent antenna elements. To validate the proposed approach, a prototype was fabricated and measured. Measurements agree well with simulations. The antenna has a robust antenna performance against the human tissue and a low peak 1-g averaged SAR (0.55 W/kg) can be also observed. Meanwhile, its low-profile and compact geometry enables it to be a good candidate for wearable applications.
- 1 January 2018
- Published by Institution of Engineering and Technology (IET)
Design of A Compact and Low-Profile Wearable MIMO Antenna for Wireless Personal Area Networks
A novel wearable multiple input multiple output (MIMO) antenna using a circular high-impedance surface (HIS) is proposed in this paper for wireless personal area networks (WPANs). The antenna can operate from 2.4 to 2.49 GHz with a good port-to-port isolation (>15 dB). A pair of degenerated characteristic modes of a circular loop antenna are utilized to design the MIMO antenna, which makes the antenna much more compact than other artificial magnetic conductor (AMC) based MIMO antennas developed by using two independent antenna elements. To validate the proposed approach, a prototype was fabricated and measured. Measurements agree well with simulations. The antenna has a robust antenna performance against the human tissue and a low peak 1-g averaged SAR (0.55 W/kg) can be also observed. Meanwhile, its low-profile and compact geometry enables it to be a good candidate for wearable applications.
- 15 November 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 66 (1) , 96-104
A Compact and Low-Profile MIMO Antenna Using a Miniature Circular High-Impedance Surface for Wearable Applications
A new miniature circular high-impedance surface (HIS) is used to design a compact and low-profile MIMO antenna for wearable applications. The antenna is designed to operate from 2.4 to 2.49 GHz for WLAN application. By employing a pair of degenerated characteristic modes of a circular loop antenna, the MIMO antenna can achieve a good port-to-port isolation (>15 dB) without increasing its geometric size. A four-element HIS is chosen to match the antenna profile and a 2-dBi antenna gain improvement is observed. The design was optimized considering the effect of packaging and then a prototype with the optimal parameters was fabricated and tested. Measurement results are in good agreement with simulations. Furthermore, the loading effect due to lossy human tissue is also considered and the results show that the antenna has a robust performance against the human phantom and a low SAR can also be obtained.
- 15 November 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 66 (1) , 96-104
A Compact and Low-Profile MIMO Antenna Using a Miniature Circular High-Impedance Surface for Wearable Applications
A new miniature circular high-impedance surface (HIS) is used to design a compact and low-profile MIMO antenna for wearable applications. The antenna is designed to operate from 2.4 to 2.49 GHz for WLAN application. By employing a pair of degenerated characteristic modes of a circular loop antenna, the MIMO antenna can achieve a good port-to-port isolation (>15 dB) without increasing its geometric size. A four-element HIS is chosen to match the antenna profile and a 2-dBi antenna gain improvement is observed. The design was optimized considering the effect of packaging and then a prototype with the optimal parameters was fabricated and tested. Measurement results are in good agreement with simulations. Furthermore, the loading effect due to lossy human tissue is also considered and the results show that the antenna has a robust performance against the human phantom and a low SAR can also be obtained.
- 8 March 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 65 (5) , 2248-2255
A Wideband Differentially Fed Dual-Polarized Antenna with Stable Radiation Pattern for Base Stations
A new wideband differentially fed dual-polarized antenna with stable radiation pattern for base stations is proposed and studied. A cross-shaped feeding structure is specially designed to fit the differentially fed scheme and four parasitic loop elements are employed to achieve a wide impedance bandwidth. A stable antenna gain and a stable radiation pattern are realized by using a rectangular cavity-shaped reflector instead of a planar one. A detailed parametric study was performed to optimize the antenna's performances. After that, a prototype was fabricated and tested. Measured results show that the antenna achieves a wide impedance bandwidth of 52% with differential standing-wave ratio <;1.5 from 1.7 to 2.9 GHz and a high differential port-to-port isolation of better than 26.3 dB within the operating frequency bandwidth. A stable antenna gain ($\approx 8$ dBi) and a stable radiation pattern with 3-dB beamwidth of 65° ±5° were also found over the operating frequencies. Moreover, the proposed antenna can be easily built by using printed circuit board fabrication technique due to its compact and planar structure.
- 8 March 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 65 (5) , 2248-2255
A Wideband Differentially Fed Dual-Polarized Antenna with Stable Radiation Pattern for Base Stations
A new wideband differentially fed dual-polarized antenna with stable radiation pattern for base stations is proposed and studied. A cross-shaped feeding structure is specially designed to fit the differentially fed scheme and four parasitic loop elements are employed to achieve a wide impedance bandwidth. A stable antenna gain and a stable radiation pattern are realized by using a rectangular cavity-shaped reflector instead of a planar one. A detailed parametric study was performed to optimize the antenna's performances. After that, a prototype was fabricated and tested. Measured results show that the antenna achieves a wide impedance bandwidth of 52% with differential standing-wave ratio <;1.5 from 1.7 to 2.9 GHz and a high differential port-to-port isolation of better than 26.3 dB within the operating frequency bandwidth. A stable antenna gain ($\approx 8$ dBi) and a stable radiation pattern with 3-dB beamwidth of 65° ±5° were also found over the operating frequencies. Moreover, the proposed antenna can be easily built by using printed circuit board fabrication technique due to its compact and planar structure.
- 8 March 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 65 (5) , 2671-2676
Design of a Wideband Antenna With Stable Omnidirectional Radiation Pattern Using the Theory of Characteristic Modes
In this communication, the design procedure of a wideband antenna with omnidirectional radiation pattern is demonstrated based on the theory of characteristic modes. Consisting of a dipole and a loop antenna, the antenna has a very simple structure. A wide impedance bandwidth is obtained because of the simultaneous excitation of the antenna's first two modes. Meanwhile, due to the fact that these two modes share a similar omnidirectional radiation pattern, a stable radiation pattern is also achieved across the operating frequency band. In order to identify the antenna's different modes, a characteristic mode analysis of the antenna is carried out first. Then, a feed configuration is specifically designed to excite the desired modes. To validate the antenna design, a prototype was fabricated and tested. Measured results agree well with the simulated ones. Measurement shows that a wide impedance bandwidth of 44.2% with |S 11 | <; -10 dB (1.85-2.9 GHz) and stable radiation patterns at both E-plane and H-plane were achieved over the operating frequency band.
- 8 March 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 65 (5) , 2671-2676
Design of a Wideband Antenna With Stable Omnidirectional Radiation Pattern Using the Theory of Characteristic Modes
In this communication, the design procedure of a wideband antenna with omnidirectional radiation pattern is demonstrated based on the theory of characteristic modes. Consisting of a dipole and a loop antenna, the antenna has a very simple structure. A wide impedance bandwidth is obtained because of the simultaneous excitation of the antenna's first two modes. Meanwhile, due to the fact that these two modes share a similar omnidirectional radiation pattern, a stable radiation pattern is also achieved across the operating frequency band. In order to identify the antenna's different modes, a characteristic mode analysis of the antenna is carried out first. Then, a feed configuration is specifically designed to excite the desired modes. To validate the antenna design, a prototype was fabricated and tested. Measured results agree well with the simulated ones. Measurement shows that a wide impedance bandwidth of 44.2% with |S 11 | <; -10 dB (1.85-2.9 GHz) and stable radiation patterns at both E-plane and H-plane were achieved over the operating frequency band.
- 2 November 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 64 (12) , 5536-5542
A Dual-polarized Planar Antenna Using Four Folded Dipoles and Its Array for Base Stations
A ±45° dual-polarized base station antenna with a planar structure is proposed for 2G/3G bands. The +45° antenna and the -45° antenna share the same radiator, which is composed of four folded dipoles and four coplanar striplines. The coplanar striplines work as λ/4 impedance transformers. Two Y-shaped feeding lines is designed to obtain a good impedance matching and a planar reflector is employed to achieve a stable radiation pattern. The antenna element has a wide impedance bandwidth of 27.8% with SWR <; 1.5 (1.7-2.25 GH), and a stable radiation pattern and a high cross polarization discrimination (XPD) are also obtained across its operating frequency band. Also, an antenna array that consists of ten elements is developed for base station applications. The array is proposed for electrical downtilt and the downtilt angle is designed from 0° to 8°. The measured results show that a wide bandwidth of 30% (1.7-2.3 GHz), a great port-toport isolation (>30 dB), a stable radiation pattern with 3-dB beamwidth 65° ± 5° in the horizontal plane, a high XPD and a high front-to-back ratio were achieved.
- 2 November 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 64 (12) , 5536-5542
A Dual-polarized Planar Antenna Using Four Folded Dipoles and Its Array for Base Stations
A ±45° dual-polarized base station antenna with a planar structure is proposed for 2G/3G bands. The +45° antenna and the -45° antenna share the same radiator, which is composed of four folded dipoles and four coplanar striplines. The coplanar striplines work as λ/4 impedance transformers. Two Y-shaped feeding lines is designed to obtain a good impedance matching and a planar reflector is employed to achieve a stable radiation pattern. The antenna element has a wide impedance bandwidth of 27.8% with SWR <; 1.5 (1.7-2.25 GH), and a stable radiation pattern and a high cross polarization discrimination (XPD) are also obtained across its operating frequency band. Also, an antenna array that consists of ten elements is developed for base station applications. The array is proposed for electrical downtilt and the downtilt angle is designed from 0° to 8°. The measured results show that a wide bandwidth of 30% (1.7-2.3 GHz), a great port-toport isolation (>30 dB), a stable radiation pattern with 3-dB beamwidth 65° ± 5° in the horizontal plane, a high XPD and a high front-to-back ratio were achieved.