BBBruna Michele Arruda de Brito Buriti

Bruna Michele Arruda de Brito Buriti

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Bruna Michele Arruda de Brito Buriti has a total of 31 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    In vitro and in vivo evaluation of innovative chitosan-based dressings incorporated with Hyptis crenata essential oil with anti-inflammatory and healing properties

    by Bruna Michele A. B. de Buriti, Caio Augusto de A. Canelas, Venâncio A. Amaral, Laís Sousa Almeida, Laine Celestino Pinto, Renata C. Silva, Tais Gratieri, Pablo Luis B. Figueiredo, Marcele F. Passos, Joyce Kelly R. da Silva

    Wound healing remains a clinical challenge, and bioactives from Amazonian biodiversity require suitable delivery systems to be effective. Hyptis crenata essential oil is a promising bioactive, exhibiting low acute toxicity and significant anti-inflammatory properties. Chitosan is a versatile biopolymer widely explored for wound dressings because of its biocompatibility, biodegradability, and antimicrobial properties. Hence, chitosan membranes containing 0.5, 2.5, and 5.0% (w/w) of Hyptis crenata essential oil (rich in 1,8-cineole (35.9%), α-pinene (20.8%), camphor (10.0%), and β-pinene (7.3%)) were produced and evaluated in vitro and in vivo. Mucoadhesion strength (0.145–0.161 N) remained consistent with essential oil addition. Essential oil did not alter membrane morphology or significantly affect mechanical properties, with Young’s modulus values (4.19–4.80 MPa) remaining within the reported range for human skin (0.02–57 MPa). Fourier Transform Infrared Spectroscopy suggested interactions between the chitosan chains and essential oil and showed thermal stability, preventing oil decomposition. In vitro, Hyptis crenata essential oil–incorporated chitosan membranes significantly reduced nitrite levels and decreased tumor necrosis factor-α in Lipopolysaccharide-stimulated macrophages, especially at lower essential oil concentrations. In vivo, CH/HcEO membranes significantly increased wound closure compared with the untreated control on day 7, reaching 73.8% and 95.4% closure on days 7 and 14, respectively. Overall, Hyptis crenata essential oil–incorporated chitosan represent a promising wound dressing strategy, combining cytocompatibility, anti-inflammatory effects, and enhanced healing.

  • Open Access

    Synthesis and characterization of biopolymer incorporated with 45S5 bioglass doped with lithium and magnesium through sol–gel method for biomedical applications

    by Josué da Silva Buriti, Kleilton Oliveira Santos, Raíssa Teixeira de Macêdo, Henrique Nunes da Silva, Maria Eduarda Vasconcelos Barreto, Bruna Michele Arruda de Brito Buriti, Rossemberg Cardoso Barbosa, Albaniza Alves Tavares, Marcele Fonseca Passos, Marcus Vinícius Lia Fook

    The development of biocompatible and bioactive materials is essential for the advancement of regenerative medicine. Biocomposites of chitosan incorporated with pure and lithium- and magnesium-doped 45S5 bioglasses were developed by the sol–gel process for biomedical applications. The bioglass was synthesized from tetraethyl orthosilicate (TEOS), triethyl phosphate (TEP), calcium nitrate tetrahydrate, and sodium carbonate, with the addition of lithium and magnesium nitrates at concentrations of 1, 2, 5, and 10% by mass. After gel formation, the samples were dried at 60 °C and heat treated at 700 °C, dispersed in a 1% chitosan solution, freeze-dried, and neutralized. The samples were characterized using thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), biodegradation studies, and cytotoxicity tests. The results indicated that higher concentrations of dopants increased mass loss and crystallinity. FTIR analyses revealed that metal ions served as network modifiers, with magnesium also acting as an intermediary, promoting more significant structural reorganizations. Thermal analyses indicated multistage decomposition and greater stability of the polymeric phase in the undoped samples. Lithium doping enhanced hydration and structural stability, while magnesium introduced greater disorder in the glass network, potentially increasing bioactivity. Swelling tests showed greater water absorption in the doped samples, the 10% formulations achieving the highest values, up to 260%. All samples exhibited nearly complete degradation in phosphate buffer solution after 28 days. Cytotoxicity assays demonstrated high cell viability (> 95%) for all compositions, with Li-doped samples showing values up to 101± 5%. The developed biocomposites may represent a promising alternative for tissue engineering applications.

  • Synthesis and characterization of Ag-doped 45S5 bioglass and chitosan/45S5-Ag biocomposites for biomedical applications

    by Josué da Silva Buriti, Maria Eduarda Vasconcelos Barreto, Francivandi Coelho Barbosa, Bruna Michele Arruda de Brito Buriti, José William de Lima Souza, Hermano de Vasconcelos Pina, Patrícia de Luna Rodrigues, Marcus Vinicius Lia Fook


  • Open Access

    Influence of MgO and CaCl2 on the rheological properties of bentonitic clays from the new Paraíba-Brazil deposits using experimental planning and statistical analysis

    by B. M. A. B. Buriti, M. E. B. Araújo, P. M. Bastos, J. M. Cartaxo, G. A. Neves, H. S. Ferreira

    New deposits of bentonite clays have been discovered in the Brazilian State of Paraíba; the most recent was at the municipality of Olivedos. Recent studies have discovered the presence of high levels of non-clay minerals that can produce unsatisfactory results when attempting to use these clays in drilling fluids. In order to make them suitable for this purpose, the MgO and CaCl2 as chemical additives were used and their influences on the rheological properties of these clays were analyzed, using an experimental planning technique and statistical analysis. The samples were obtained using experimental modeling by the delineation of mixtures technique; first, the clays were transformed with sodium carbonate and then dosed with MgO and CaCl2. The rheological properties, apparent viscosity (AV) and plastic viscosity (PV) were determined according to the Petrobras standard (AV≥15 cP; PV≥4 cP). The results showed that the values of AV and PV increased considerably and that MgO was the additive that contributed most to the improvement of these properties, making these additives suitable for use in water-based drilling fluids.

  • Open Access

    Influence of the additivation process on cation exchange capacity and viscosity of bentonitic clay dispersions

    by I. C. G. Morais, I. A. Silva, B. M. A. B. Buriti, J. V. Fernandes, D. S. Silva, G. A. Neves, H. S. Ferreira

    In Brazil, bentonite clays are not naturally sodic and it is an industrial practice the sodium additivation, since sodium ion expands their lamellae allowing a larger amount of water to penetrate. The objective was to analyze the influences of the use of sodium carbonate on the clay during the additivation process, the moisture content and the cure time on cation exchange and viscosity of bentonite clay dispersions for water-based drilling fluids, since there is a shortage of studies on this subject. Newly discovered bentonite clays in Paraíba State, Brazil, were chemically, physically and mineralogically characterized and were additivated with sodium carbonate in aqueous solution (process 1) or in powder form (process 2). Samples with 25% to 60% of moisture (dry basis) were prepared and submitted to cure times of 7 to 45 days. Process 1, as expected, showed better results of cation exchange capacity, viscosity and filtrate volume. The ideal cure time was 15 days. After this period there was a reversal of the cation exchange reactions.


  • Open Access

    Characterization of clays from the State of Paraíba, Brazil for aesthetic and medicinal use

    by B. M. A. B. Buriti, J. S. Buriti, I. A. Silva, J. M. Cartaxo, G. A. Neves, H. C. Ferreira

    This study aimed to evaluate the potential of clays from the State of Paraíba to be used for medicinal, therapeutic and aesthetic treatments. The samples were characterized by X-ray diffraction, X-ray fluorescence chemical composition, thermogravimetry, differential thermal analysis, laser diffraction granulometric analysis, cation exchange capacity, and antimicrobial activity. Based on the study, it was concluded that the clays from the State of Paraíba had properties similar to those of commercial clay. The antimicrobial evaluation revealed that the samples showed no activity against the three bacterial strains of clinical interest: Staphylococcus epidermidis ATCC 12 228, Staphylococcus aureus ATCC 25 923, and Escherichia coli ATCC 25 922. Finally, it was concluded that the clays studied have the potential for technological applications in medicinal, therapeutic, and aesthetic treatments, and as raw material for obtaining biomaterials, due to their stability and biological safety.