RBRahul Bhattacharyya

Rahul Bhattacharyya

*This is an algorithmically generated author record based on publicly available information.

Rahul Bhattacharyya has a total of 49 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    The incidence of arthrogenic muscle inhibition in acute knee injuries: a prospective cohort study in a tertiary acute knee unit

    by M.J. Kennedy, C.S. Leung, T.C.F. Soh, H. Sitton-Kent, H.J. Thomson, O. Hill, T. Nunn, O. Bailey, G.P. Hopper, R. Bhattacharyya


  • Bone bridge technique for lateral meniscal allograft transplantation: no difference in clinical outcome compared to the soft tissue technique

    by Rahul Bhattacharyya, Harry Krishnan, Nicole Bausch, Adam Pilarski, Niall McGoldrick, Peter Thompson, Andrew Metcalfe, Tim Spalding

    Purpose: There is considerable debate regarding the optimal method of fixation for lateral meniscus allograft transplantation (MAT), with bone bridge techniques technically harder but allowing maintenance of root attachments, while soft tissue techniques are potentially more challenging for healing. The aim of this study was to compare the clinical results of the bone bridge and soft tissue techniques for lateral MAT in terms of failure, re‐operation rate, complications and patient reported outcomes.Methods: Retrospective analysis of prospectively collected data for patients undergoing primary lateral MAT with a minimum of 12‐month follow‐up. Patients following surgery utilising the bone bridge technique (BB) were compared with historical control patients who underwent MAT with the soft tissue technique (ST). Outcome was assessed by failure rate, defined as removal or revision of the meniscus transplant, survivorship by Kaplan–Meir analysis, re‐operation rates, and other adverse event. Patient‐reported outcome measures (PROMs) were compared using data at the 2‐year point or 1 year if not reached 2 years.Results: One‐hundred and twelve patients following lateral meniscal transplants were included, 31 in the BB group and 81 in the ST historical control group, with no differences in demographics between both groups. Median follow‐up for the BB group was 18 (12–43) months compared to 46 (15–62) months for the ST group. There were 3 failures (9.6%) in the BB group v 2 (2.4%) in the ST group (n.s.) with a mean time to failure of 9 months in both groups. 9 patients (29%) required a re‐operation (all cause) in the BB group v 24 patients (29.6%) in the ST group (n.s). There was no difference in complications between both groups. There was significant improvement (p < 0.0001) in all PROMs (Tegner, IKDC, KOOS and Lysholm) between baseline and 2‐year follow‐up for both groups but no between‐group differences.Conclusion: Lateral MAT has a high success rate for symptomatic meniscal deficiency with significant benefits irrespective of the fixation technique. There is no advantage in performing the more technically demanding BB technique over ST fixation.Level of evidence: Level 2.


  • Open Access

    Impact of complete lock-down on total infection and death rates: A hierarchical cluster analysis

    by Samit Ghosal, Rahul Bhattacharyya, Milan Majumder

    Introduction and Aims: Retarding the spread of SARS-CoV-2 infection by preventive strategies is the first line of management. Several countries have declared a stringent lock-down in order to enforce social distancing and prevent the spread of infection. This analysis was conducted in an attempt to understand the impact of lock-down on infection and death rates over a period of time. Material and Methods: A validated database was used to generate data related to countries with declared lock-down. Simple regression analysis was conducted to assess the rate of change in infection and death rates. Subsequently, a k-means and hierarchical cluster analysis was done to identify the countries that performed similarly. Sweden and South Korea were included as counties without lock-down in a second-phase cluster analysis. Results: There was a significant 61% and 43% reduction in infection rates 1-week post lock-down in the overall and India cohorts, respectively, supporting its effectiveness. Countries with higher baseline infections and deaths fared poorly compared to those who declared lock-down early on. Sweden and South Korea fared equally well, as most lock-down countries stemmed the growth of infection and death. Conclusion: Lock-down has proven to be an effective strategy is slowing down the SARS-CoV-2 disease progression exponentially. However, lessons need to be learned from Sweden and South Korea on arresting the disease progression without imposing such stringent measures.

  • Knee Arthroscopy

    by Rahul Bhattacharyya, Donald J. Davidson, Kapil Sugand, Pouya Akhbari, Matthew J. Bartlett, Rajarshi Bhattacharya, Chinmay M. Gupte

    Background: Virtual reality and cadaveric simulations are expensive and not readily accessible 1 . Innovative and accessible training adjuncts are required to help meet training needs. Cognitive task analysis (CTA) has been used extensively to train pilots and surgeons in other surgical specialties 2–6 . However, the use of CTA tools within orthopaedics is in its infancy. Arthroscopic procedures are minimally invasive and require a different skill set compared with open surgery. Residents often feel poorly prepared to perform this in the operating room because of the steep learning curve associated with acquiring basic arthroscopic skills. We designed the Imperial Knee Arthroscopy Cognitive Task Analysis (IKACTA) tool, which is, to our knowledge, the first CTA tool described in the orthopaedic literature, demonstrating significant objective benefits in training novices to perform diagnostic knee arthroscopy. Description: The IKACTA tool, which is the combination of the written description of the phases below and the videos (with superimposed audio recordings) of each phase, utilizes simultaneous written and audiovisual modalities to teach diagnostic knee arthroscopy. The procedure was divided into 7 phases: (1) operating room and patient setup, (2) preparation and draping, (3) anterolateral portal placement, (4) examination of the patellofemoral joint and the lateral gutter, (5) examination of the medial compartment and anteromedial portal placement, (6) examination of the intercondylar notch and the lateral compartment, and (7) postoperative care and rehabilitation. For each phase, there are sections on the technical steps, cognitive decision-making behind each technical step, and potential errors and solutions. Video clips recorded by an expert surgeon in the operating room specific to each phase and audio voice recordings explaining each phase superimposed on the video clips were combined with the written information to design the IKACTA tool. Alternatives: Not applicable. Rationale: This learning tool allows a trainee to learn each technical step, the cognitive decision-making underpinning each step, and potential errors and solutions relevant to each phase of the procedure. Furthermore, the learner can use written and audiovisual modalities simultaneously to learn this technique by reading the written component of the tool first and then watching the relevant video clips with the audio recordings for each phase of the procedure. Alternative training techniques currently include the traditional apprenticeship model, which is becoming increasingly insufficient in the current environment of reduced training hours 7,8 . Adjuncts to this model are essential to help meet training needs. The IKACTA tool has demonstrated significant objective benefits for novice trainees to learn diagnostic knee arthroscopy 9 . The idea behind this learning tool is for the trainee surgeon to use this tool independent of the trainer, prior to attending the operating room. The tool provides trainees with knowledge and cognitive understanding of the procedural steps before they perform this procedure on patients. They are aware of potential errors and methods to avoid or overcome these errors. We believe that this tool will reduce the initial difficult phase of the learning curve for junior residents and, therefore, will improve training efficiency in the operating room.


  • Open Access

    Trauma simulation training: a randomized controlled trial ­evaluating the effectiveness of the Imperial Femoral Intramedullary Nailing Cognitive Task Analysis (IFINCTA) tool

    by Rahul Bhattacharyya, Kapil Sugand, Bilal Al-Obaidi, Ian Sinha, Rajarshi Bhattacharya, Chinmay M Gupte

    Background and purpose - Cognitive task analysis (CTA) has been used extensively to train pilots and in other surgical specialties. However, the use of CTA within orthopedics is in its infancy. We evaluated the effectiveness of a novel CTA tool to improve understanding of the procedural steps in antegrade femoral intramedullary nailing. Material and methods - Design: A modified Delphi technique was used to generate a CTA from 3 expert orthopedic trauma surgeons for antegrade femoral intramedullary nailing. The written and audiovisual information was combined to describe the technical steps, decision points, and errors for each phase of this procedure Validation: A randomized double-blind controlled trial was undertaken with 22 medical students (novices) randomized into 2 equal groups. The intervention group were given the CTA tool and the control group were given a standard operative technique manual. They were assessed using the validated "Touch Surgery™" application assessment tool on femoral intramedullary nailing. Results - The pre-test scores between the two groups were similar. However, the post-test scores were statistically significantly better in the intervention group compared with the control group. The improvement (post-test median scores) in the intervention group compared with the control group was 20% for patient positioning and preparation, 21% for femoral preparation, 10% for proximal locking, and 19% for distal locking respectively (p < 0.001 for all comparisons). Interpretation - This is the first multimedia CTA tool in femoral intramedullary nailing that is easily accessible, user-friendly, and has demonstrated significant benefits in training novices over the traditional use of operative technique manuals.


  • Lateral Intercondylar Ridge: Is it a reliable landmark for femoral ACL insertion?: An anatomical study

    by Rahul Bhattacharyya, Andrew Ker, Quentin Fogg, Simon J. Spencer, Jibu Joseph

    Background: Incorrect femoral tunnel placement is the most common cause of graft failure during Anterior Cruciate Ligament (ACL) Reconstruction. A reliable landmark can minimize errors. Aim: To identify whether the Lateral Intercondylar Ridge (LIR) is a consistent anatomical structure and define its relationship with the femoral ACL insertion. Materials and methods: Phase 1: we studied 23 femoral dry bone specimens macroscopically. Using a digital microscribe, the medial surface of the lateral femoral condyle was reconstructed (3D) to evaluate whether there was an identifiable bony ridge. Phase 2:7 cadaveric specimens with intact soft tissues were dissected to identify the femoral ACL insertion. A 3D reconstruction of the femoral ACL insertion and the surface allowed us to define the relationship between the LIR and the ACL insertion. Results: All specimens had a defined LIR on the medial surface of the lateral femoral condyle. The ridge was consistently located just anterior to the femoral ACL insertion. The ACL footprint was present in the depression between the ridge and the Inferior Articular Cartilage Margin (IACM). The mean distance from the midpoint of the IACM to the LIR was 10.1 mm. Conclusions: This is the first study to use the microscribe to digitally reconstruct the medial surface of the lateral femoral condyle. It shows that the LIR is a consistent anatomical structure that defines the anterior margin of the femoral ACL insertion, which guides femoral tunnel placement. Our findings support the ruler technique, which is a commonly used method for anatomic single bundle ACL reconstruction.


  • Knee Arthroscopy Simulation

    by Rahul Bhattacharyya, Donald J. Davidson, Kapil Sugand, Matthew J. Bartlett, Rajarshi Bhattacharya, Chinmay M. Gupte

    Background: Virtual-reality and cadaveric simulations are expensive and not readily accessible. Innovative and accessible training adjuncts are required to help to meet training needs. Cognitive task analysis has been used extensively to train pilots and in other surgical specialties. However, the use of cognitive task analyses within orthopaedics is in its infancy. The purpose of this study was to evaluate the effectiveness of a novel cognitive task analysis tool to train novice surgeons in diagnostic knee arthroscopy in high-fidelity, phantom-limb simulation. Methods: Three expert knee surgeons were interviewed independently to generate a list of technical steps, decision points, and errors for diagnostic knee arthroscopy. A modified Delphi technique was used to generate the final cognitive task analysis. A video and a voiceover were recorded for each phase of this procedure. These were combined to produce the Imperial Knee Arthroscopy Cognitive Task Analysis (IKACTA) tool that utilizes written and audiovisual stimuli to describe each phase of a diagnostic knee arthroscopy. In this double-blinded, randomized controlled trial, a power calculation was performed prior to recruitment. Sixteen novice orthopaedic trainees who performed ≤10 diagnostic knee arthroscopies were randomized into 2 equal groups. The intervention group (IKACTA group) was given the IKACTA tool and the control group had no additional learning material. They were assessed objectively (validated Arthroscopic Surgical Skill Evaluation Tool [ASSET] global rating scale) on a high-fidelity, phantom-knee simulator. All participants, using the Likert rating scale, subjectively rated the tool. Results: The mean ASSET score (and standard deviation) was 19.5 ± 3.7 points in the IKACTA group and 10.6 ± 2.3 points in the control group, resulting in an improvement of 8.9 points (95% confidence interval, 7.6 to 10.1 points; p = 0.002); the score was determined as 51.3% (19.5 of 38) for the IKACTA group, 27.9% (10.6 of 38) for the control group, and 23.4% (8.9 of 38) for the improvement. All participants agreed that the cognitive task analysis learning tool was a useful training adjunct to learning in the operating room. Conclusions: To our knowledge, this is the first cognitive task analysis in diagnostic knee arthroscopy that is user-friendly and inexpensive and has demonstrated significant benefits in training. Clinical Relevance: The IKACTA will provide trainees with a demonstrably strong foundation in diagnostic knee arthroscopy that will flatten learning curves in both technical skills and decision-making.


  • The virtual fracture clinic: Reducing unnecessary review of clavicle fractures

    by Rahul Bhattacharyya, Prem Ruben Jayaram, Robin Holliday, Paul Jenkins, Iain Anthony, Lech Rymaszewski


  • Open Access

    Bisphosphonate-Induced Periprosthetic Fracture: A Cause of Painful Total Hip Arthroplasty

    by Rahul Bhattacharyya, Stephanie Spence, Gavin O’nEill, Kumar Periasamy

    Background. Cases have been reported in the literature of periprosthetic fractures associated with the use of bisphosphonates occurring in the long term following a Total Hip Replacement (THR). We report an interesting case of periprosthetic fracture secondary to bisphosphonate use only a few months after a THR.Case Report. A 72-year-old lady (on bisphosphonates for 10 years) underwent a THR for osteoarthritis. She was pain-free in the first four months postoperatively. Thereafter, she developed spontaneous onset of pain in the lateral aspect of her thigh and groin and found it difficult to weight-bear. X-rays and blood tests were unremarkable. An ultrasound and MRI scan showed no evidence of effusion/collection or periprosthetic fracture. A radionuclide bone scan showed an abnormal appearance of the right femoral shaft. A subsequent CT scan showed an oblique vertical split on the anterior surface of the upper right femoral shaft. This stress fracture was managed nonoperatively with protected weight bearing. She has progressed well with good clinical and radiological signs of fracture healing.Conclusion. This case is an important addition to our knowledge that bisphosphonate-induced periprosthetic stress fractures can be a cause of hip pain only a few months following a THR.