NTNetsanet Tessema

Netsanet Tessema

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Netsanet Tessema has a total of 60 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Assessment of Low Polarization Dependent Multicast and Select Switch Based on Bulk SOA for Data Center Application

    by Aref Rasoulzadeh Zali, Netsanet M. Tessema, Steven Kleijn, Luc Augustin, Ripalta Stabile, Nicola Calabretta

    We have designed, fabricated, and characterized a low polarization dependent multicast and select (MCS) switch based on a newly developed novel bulk SOA co-integrated with passive waveguides. The proposed new bulk SOA-based MCS switch requires the co-integration of active SOAs (gate and booster) with several passive InP elements. First, we have presented a theoretical analysis and the design and properties of the proposed bulk SOA and demonstrated its low polarization-dependent properties. Then, we evaluated and characterized the switch's performance, including gain, optical signal-to-noise ratio (OSNR), and data transmission features. The experimental results verify that the MCS switch exhibits polarization-dependent gain in the range of 0.1 to 2.2 dB for all ports and a broadband gain of approximately 70 nm across all ports. The measured OSNR, for all channels, is > 42 dB at 1580 nm. Moreover, experimental data transmission assessments show operation at high bitrates of 30 Gb/s with a low power penalty of less than 1 dB at 10 −9 . The dynamic power penalty range of the switch is also investigated. The MCS switch exhibits a wide range of > 20 dB input power dynamic range for a power penalty of less than 3 dB for a 10 Gb/s NRZ signal.


  • Ultrawide-band Low Polarization Sensitivity 3-µm SOI Arrayed Waveguide Gratings

    by Yu Wang, Srivathsa Bhat, Netsanet Tessema, Rafael Kraemer, Antonio Napoli, Giovanni Delrosso, Nicola Calabretta

    An ultrawide-band (UWB), O- to L- band, polarization insensitive (PI) 1 × 12 100 GHz channel spacing arrayed waveguide grating (AWG) is designed and realized in 3-μm Silicon-on-Insulator (SOI) platform. PI and UWB operations are achieved by directly exploiting the UWB 3-μm PI silicon waveguide as the arrayed waveguide. The PI AWG can be employed as demultiplexer and multiplexer in photonic integrated circuits (PIC)s, such as UWB wavelength selective switches (WSS)s. Experimental results demonstrate UWB (O- to L- band) and PI 1 × 12 AWG operation with −0.82 dB to −1.52 dB insertion losses, <−35 dB average cross-talk, 0.18 dB to 1.27 dB polarization dependent loss (PDL), and 0.006 nm to 0.041 nm polarization dependent wavelength shift (PDWS). Error-free operation at 10 −9 BER were measured with power penalties 31 -1 multi-band data, respectively.


  • Impact of SOA-Based Add-Drop Switch Nodes on High-Capacity Multicarrier Transmission for Metro-Access Networks

    by Mariangela Rapisarda, Alberto Gatto, Paola Parolari, Netsanet Tessema, Kristif Prifti, Nicola Calabretta, Christian Neumeyr, Pierpaolo Boffi

    Internet-generated traffic growth is forcing the development of new low-cost solutions in metropolitan area networks (MANs), in particular in the transceiver and network node architectures. Semiconductor optical amplifier (SOA)-based wavelength blockers can be used as fundamental building blocks to add and drop optical channels in the node architecture of several network hierarchical levels. Even if its employment is advantageous in terms of costs and amplification bandwidth, the SOA can operate in a nonlinear regime. This work analyzes the impact of SOA-based node crossing on high-capacity discrete multitone (DMT) signals. In order to properly evaluate the interplay between optical channels and SOA self-gain modulation, both external and direct modulations are considered. Dual-sideband (DSB) and single-sideband (SSB) DMT variants are taken into account, showing no significant difference in the impact of SOA crossing for external modulation of a DFB laser. On the other hand, an important effect of subcarrier suppression arises on DSB DMT direct modulation of a vertical cavity surface emitting laser (VCSEL), less consistent for SSB DMT direct modulation. The analysis allowed to properly choose the bias current for the SOA employed in an experimental setup used to evaluate the transmission performance in a MAN scenario including add-drop lossless switch nodes. The experimental results demonstrate that a target capacity of more than 50 Gb/s per channel can be achieved in a 116-km MAN network composed of an SOA-based metro-access node and two metro-core aggregators, considering the transmission of three 25-GHzspaced DMT channels.


  • Design and Fabrication of Low Polarization Dependent Bulk SOA Co-Integrated With Passive Waveguides for Optical Network Systems

    by Aref Rasoulzadeh Zali, Steven Kleijn, Luc Augustin, Netsanet M. Tessema, Kristif Prifti, Ripalta Stabile, Nicola Calabretta

    Low polarization-dependent semiconductor optical amplifiers (SOA) co-integrated with passive circuits via an easy fabrication process are highly demanded in optical communication systems. However, despite several SOAs have been reported, co-integration of polarization-independent bulk SOA with passive waveguides in the InP platform to generate complex systems remains an issue. In this work, we design, simulate, fabricate and characterize a low polarization-dependent SOA based on a bulk active layer that is co-integrated with passive waveguides and exhibits its potential application to realize photonic integrated circuits. Simulation results are in good agreement with the experimental results. Based on the simulation results, the designed SOAs with the length of 300 μm, 750 μm, and 1500 μm cover broadband with 3-dB bandwidth of around 65 nm, 40 nm, and 37 nm, respectively. Characterization of SOAs with different lengths between 300 μm and 1500 μm co-integrated with passive waveguide has been performed. Broadband gain and polarization-dependent gain (PDG) less than 2 dB is measured for 300 μm SOA. Also, at 1550 nm, output saturation power of 12.8 dBm is achieved at the current density of 11.6 kA/cm2. For the longest SOA with 1500 μm length, the higher gain of 16 dB with PDG lower than 2.5 dB and saturation power of 7.4 dBm at the wavelength of 1588 nm and current density of 4.1 kA/cm2 are achievable. Thus, one could design SOA based photonic circuits with higher gain and saturation power and low PDG by exploiting different SOA lengths and design at the wavelength of interest, opening to potential application in photonic integrated circuits like low-loss and polarization-insensitive switches.


  • Experimental assessment of an ultra-wide band (O to L) polymer thermo-optic switch matrix

    by Yu Wang, Netsanet Tessema, Hyun-Do Jung, Jang-Uk Shin, Nicola Calabretta

    An ultra-wide band (O to L) 4×4 polymer switch matrix is experimentally demonstrated. Results show 36dB switching ratio, <6.5dB fiber-to-fiber loss, and error-free operation with <0.15dB power penalty at 10Gb/s and 50Gb/s.


  • Photonically Integrated Multicast Switch on InP as a Transponder Aggregator for ROADM Nodes

    by N. Tessema, M. van Den Hout, U. Sadiq, S. van der Heide, A. Albores-Mejia, E. Kleijn, G. Mariani, Y.W Ang, K. Prifti, A. Rasoulzadehzali, et al.

    We report a multicast switch PIC serving as a transponder aggregator. Successful data transmission through InP multicast switch and reception in a fully packaged coherent receiver demonstrates the drop traffic flow of a ROADM node.


  • Lossless Photonic Integrated Add-Drop Switch Node for Metro-Access Networks

    by Kristif Prifti, Xuwei Xue, Netsanet Tessema, Ripalta Stabile, Nicola Calabretta

    We assess the performance of a modular photonic integrated circuit (PIC) for space and time optical switching as an optical add-drop node for metro-access network applications. The PIC based on semiconductor optical amplifier (SOA) technology enables the implementation of compact, low cost and lossless add-dropping through fast optical switching. Data integrity measurements demonstrate error-free switching operation with less than 1 dB and 2.5 dB power penalty for 10 Gb/s and 40 Gb/s NRZ OOK optical signal, respectively. The dynamic control of the SOA based optical gates by the switch controller permits the power equalization of the switched channels. The experimental results also demonstrate dynamic forwarding, dropping and multicasting operation for a packetized 10 Gb/s NRZ OOK optical signal. The transparency of the SOA technology towards the optical signal’s data rate allows to avoid costly and power consuming dedicated interfaces at the add-drop node and open a path towards efficient statistical multiplexing.


  • Building 5G Millimeter-Wave Wireless Infrastructure: Wide-Scan Focal-Plane Arrays With Broadband Optical Beamforming

    by A Bart Smolders, Aleksei Dubok, Netsanet M Tessema, Zhe Chen, Ali Al Rawi, Ulf Johannsen, Thomas Bressner, Dusan Milosevic, Hao Gao, Eduward Tangdiongga, et al.

    A wide-scan and broadband focal-plane array (FPA) concept is introduced in this article, which provides high antenna gain and effective isotropic radiated power (EIRP) with electronic beamsteering within a relatively large field of view (FoV), up to +/-20°. The antenna uses a bifocal double-reflector concept that optimizes the illumination of the focal-plane region. In this way, we have reduced the required size of the feed array and have maximized the number of simultaneously active array elements. By using a photonics beamformer, a broadband system for the 20-40-GHz band can be created with a fiber-based interface to a central processing unit. This hybrid antenna system is a very interesting concept for future 5G and beyond [5G millimeter-wave (mm-wave) base stations, two-way satellite communication systems, and point-to-point wireless backhaul systems]. A silicon BiCMOS low-noise amplifier (LNA) and a photonic integrated circuit (PIC) for the optical beamformer have been developed and integrated into the overall system. A system-level demonstrator was developed and experimentally validated in receive mode. Our concept provides an antenna gain of more than 40 dBi over an FoV of +/-15° at 28.5 GHz.


  • High-Capacity Dynamic Indoor Network Employing Optical-Wireless and 60-GHz Radio Techniques

    by Ketemaw Addis Mekonnen, Johan H.C. van Zantvoort, Nicola Calabretta, Netsanet Tessema, Eduward Tangdiongga, Ton Koonen

    We demonstrate a hybrid radio-optical wireless communication system using a photonic integrated all-optical-cross-connect (OXC) chip to realize a highly reconfigurable and reliable bidirectional indoor wireless network that provides the ultimate capacity per user. By remote wavelength-tuning, narrow optical beams are directed to the users employing a passive two-dimensional beam steering module fixed at the ceiling in each room. Robustness regarding line-of-sight issues is achieved by implementing 60-GHz radio protection channels generated optically using a shared amplitude modulator via the OXC chip. The use of a 35-GHz reflective electroabsorption modulator (REAM) monolithically integrated with a semiconductor optical amplifier (SOA) chip is proposed for upstream wideband analog applications. The REAM-SOA provides similar performances as an REAM, but over a wide range of input optical powers and wavelengths. This mitigates the need for accurate control of the input signal, especially at remote sites where simplicity is strictly required. System experiments showed downstream optical-wireless transmission capacities of up to 35 Gb/s per user and 60-GHz protection channels with a capacity of 20 Gb/s. Upstream radio-over-fiber transmission rates of more than 35 Gb/s have also been achieved.


  • A Tunable Si3N4 Integrated True Time Delay Circuit for Optically-Controlled K-Band Radio Beamformer in Satellite Communication

    by N. M. Tessema, Z. Cao, J. H. C. Van Zantvoort, K. A. Mekonnen, A. Dubok, E. Tangdiongga, A. B. Smolders, A. M. J. Koonen

    In this paper we present the design, realization, and experimental characterization of a photonic integrated true time delay circuit on a CMOS-compatible Si 3 N 4 platform. The true time delay circuit consists of an optical side band filter for single side band modulation and an optical ring resonator for broadband time delay. Two methods of optical delay tuning are investigated: 1) optical wavelength and 2) thermo-optic delay tuning. The wavelength controlled tuning enables a large delay tuning range and can be done remotely from a distant location. The close to a linear phase measurements can be used for full beam-scanning of radio signals with frequencies in the 20 GHz band. The thermal control results in a 5 GHz RF delay bandwidth. A proof-of-concept 2 × 1 beamforming is demonstrated in the 20 GHz band. The design presented here can be employed to realize multi-beams for multi-users serviced by multiple satellites.