Corrado Possieri
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Corrado Possieri has a total of 49 co-authors. Here are the top co-authors by number of shared publications:
- Antonio Tornambè
Dipartimento di Ingegneria Civile e Ingegneria Informatica, Universit degli Studi di Roma Tor Vergata, Rome, Italy
31 shared publications - Laura Menini
Dipartimento di Ingegneria Civile e Ingegneria Informatica, Universit degli Studi di Roma Tor Vergata, Rome, Italy
26 shared publications - Mario Sassano
University of Rome Tor Vergata
13 shared publications Laura Menini
Dipartimento di Ingegneria Civile e Ingegneria Informatica, Università di Roma “Tor Vergata”, 00133, Roma, Italy
9 shared publications- Giuseppe Carlo Calafiore
Department of Electronics and Telecommunications, Politecnico di Torino, Torino, Italy
7 shared publications - Sergio Galeani
University of Rome Tor Vergata
6 shared publications
Latest Publications
- Open Access
- 15 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Control Systems Letters
- Vol. 10, 901-906
Data-Driven Identification of Switched Discrete-Time Linear Systems
This letter addresses the identification of discrete-time switched linear input–output systems from measured input–output data when the switching signal is unknown. The key idea is to eliminate the unmeasured switching sequence by constructing a single data–driven polynomial constraint that vanishes on the union of the mode–dependent regression hyperplanes; the local dynamics are then retrieved from the linear factors of such a polynomial. For the ideal case, i.e., in the absence of noise and assuming exact computations, two complementary identification routes are developed: an algebraic geometry approach based on ideals and Gröbner bases, which provides insights on the structure of the problem, and a linear algebra approach that builds the data-driven polynomial constraint via determinants of suitably constructed data matrices. An iterative approach is proposed to efficiently implement the latter method and to improve its robustness to the presence of measurement noise or rounding error.
- 15 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Control Systems Letters
- Vol. 10, 901-906
Open AccessData-Driven Identification of Switched Discrete-Time Linear Systems
This letter addresses the identification of discrete-time switched linear input–output systems from measured input–output data when the switching signal is unknown. The key idea is to eliminate the unmeasured switching sequence by constructing a single data–driven polynomial constraint that vanishes on the union of the mode–dependent regression hyperplanes; the local dynamics are then retrieved from the linear factors of such a polynomial. For the ideal case, i.e., in the absence of noise and assuming exact computations, two complementary identification routes are developed: an algebraic geometry approach based on ideals and Gröbner bases, which provides insights on the structure of the problem, and a linear algebra approach that builds the data-driven polynomial constraint via determinants of suitably constructed data matrices. An iterative approach is proposed to efficiently implement the latter method and to improve its robustness to the presence of measurement noise or rounding error.
- Open Access
- 8 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Control Systems Letters
- Vol. 10, 343-348
Extrapolation-Based Practical Observers
A novel practical observer that mitigates the classical trade-off between transient peaking and steady-state estimation error is presented. The proposed extrapolation-based observer consists of multiple practical observers, whose gains are suitably chosen, and fuses their outputs using the Richardson extrapolation formula. The effectiveness of this observer is analytically studied and is validated using a chaotic system from the literature.
- 8 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Control Systems Letters
- Vol. 10, 343-348
Open AccessExtrapolation-Based Practical Observers
A novel practical observer that mitigates the classical trade-off between transient peaking and steady-state estimation error is presented. The proposed extrapolation-based observer consists of multiple practical observers, whose gains are suitably chosen, and fuses their outputs using the Richardson extrapolation formula. The effectiveness of this observer is analytically studied and is validated using a chaotic system from the literature.
- 30 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/CAA Journal of Automatica Sinica
- Vol. 13 (1) , 186-204
On the Use of the Nelder-Mead Simplex Method in Control Design and Systems Theory
The Nelder-Mead simplex method is a well-known algorithm enabling the minimization of functions that are not available in closed-form and that need not be differentiable or convex. Furthermore, it is particularly parsimonious on the number of function evaluations, thus making it preferable to convex optimization paradigms in the case, common when dealing with control design problems, that the objective function of the optimization problem is non-differentiable, non-convex, and its closed-form is not available or difficult to be computed analytically. The main goal of this paper is to show how the joint use of the Nelder-Mead simplex method and the Morrison algorithm can be successfully used to solve relevant and challenging control problems that cannot be easily solved using analytic methods. In particular, it is shown how the problems of strong stabilization, static output feedback stabilization, and design of robust controllers having fixed structure can be framed as optimization problems, which, in turn, can be efficiently solved by coupling the two above mentioned algorithms. The performance of this procedure is compared with state-of-the-art techniques on dozens of static output feedback benchmark case studies, and its effectiveness is demonstrated by several examples.
- 30 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/CAA Journal of Automatica Sinica
- Vol. 13 (1) , 186-204
On the Use of the Nelder-Mead Simplex Method in Control Design and Systems Theory
The Nelder-Mead simplex method is a well-known algorithm enabling the minimization of functions that are not available in closed-form and that need not be differentiable or convex. Furthermore, it is particularly parsimonious on the number of function evaluations, thus making it preferable to convex optimization paradigms in the case, common when dealing with control design problems, that the objective function of the optimization problem is non-differentiable, non-convex, and its closed-form is not available or difficult to be computed analytically. The main goal of this paper is to show how the joint use of the Nelder-Mead simplex method and the Morrison algorithm can be successfully used to solve relevant and challenging control problems that cannot be easily solved using analytic methods. In particular, it is shown how the problems of strong stabilization, static output feedback stabilization, and design of robust controllers having fixed structure can be framed as optimization problems, which, in turn, can be efficiently solved by coupling the two above mentioned algorithms. The performance of this procedure is compared with state-of-the-art techniques on dozens of static output feedback benchmark case studies, and its effectiveness is demonstrated by several examples.
- Open Access
- 26 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Control Systems Letters
- Vol. 10, 67-72
Derivative Free Data-Driven Stabilization of Continuous-Time Linear Systems From Input-Output Data
This letter presents a data-driven framework for the design of stabilizing controllers from input-output data in the continuous-time, linear, and time-invariant domain. Rather than relying on measurements or reliable estimates of input and output time derivatives, the proposed approach uses filters to derive a parameterization of the system dynamics. This parameterization is amenable to the application of linear matrix inequalities enabling the design of stabilizing output feedback controllers from input-output data and the knowledge of the order of the system.
- 26 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Control Systems Letters
- Vol. 10, 67-72
Open AccessDerivative Free Data-Driven Stabilization of Continuous-Time Linear Systems From Input-Output Data
This letter presents a data-driven framework for the design of stabilizing controllers from input-output data in the continuous-time, linear, and time-invariant domain. Rather than relying on measurements or reliable estimates of input and output time derivatives, the proposed approach uses filters to derive a parameterization of the system dynamics. This parameterization is amenable to the application of linear matrix inequalities enabling the design of stabilizing output feedback controllers from input-output data and the knowledge of the order of the system.
- 24 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Control Systems Technology
- Vol. 34 (1) , 474-484
Hybrid Controller for Enhanced Plasma Stabilization in Tokamaks
Maintaining plasma stability in tokamaks presents a key challenge for achieving sustainable nuclear fusion, mainly due to the occurrence of vertical displacement events (VDEs) in elongated plasma configurations. This article proposes a hybrid control framework that dynamically adapts to varying operational conditions through a state-dependent switching policy. The controller combines a nominal control law that ensures high performance under normal conditions with a more aggressive control strategy activated during significant plasma displacements to stabilize the system and mitigate VDEs. The hybrid scheme guarantees local boundedness of the closed-loop system trajectories under significant disturbances while preserving the nominal asymptotic properties of the plant in the presence of small disturbances. An implementation of this framework is applied to a simplified model of plasma vertical position in tokamak devices. Experimental validation on the Frascati Tokamak Upgrade (FTU) device demonstrates the effectiveness of the hybrid controller in extending operational stability limits, outperforming conventional control approaches in high-elongation scenarios.
- 24 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Control Systems Technology
- Vol. 34 (1) , 474-484
Hybrid Controller for Enhanced Plasma Stabilization in Tokamaks
Maintaining plasma stability in tokamaks presents a key challenge for achieving sustainable nuclear fusion, mainly due to the occurrence of vertical displacement events (VDEs) in elongated plasma configurations. This article proposes a hybrid control framework that dynamically adapts to varying operational conditions through a state-dependent switching policy. The controller combines a nominal control law that ensures high performance under normal conditions with a more aggressive control strategy activated during significant plasma displacements to stabilize the system and mitigate VDEs. The hybrid scheme guarantees local boundedness of the closed-loop system trajectories under significant disturbances while preserving the nominal asymptotic properties of the plant in the presence of small disturbances. An implementation of this framework is applied to a simplified model of plasma vertical position in tokamak devices. Experimental validation on the Frascati Tokamak Upgrade (FTU) device demonstrates the effectiveness of the hybrid controller in extending operational stability limits, outperforming conventional control approaches in high-elongation scenarios.
- 20 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Control Systems Letters
- Vol. 9, 1219-1224
A Derivative Free Framework for Data-Driven Stabilization of Continuous-Time Linear Systems
This letter presents a novel data-driven framework for the design of control systems in the continuous-time domain. Differently from conventional methodologies that rely on measurements or estimates of the time derivatives of the plant state, the proposed approach utilizes filters of the input and the state of the plant to derive a parameterization for continuous-time linear time-invariant feedback systems. This parameterization is solely dependent on measurable quantities, enabling the direct application of linear matrix inequalities to solve stabilization problems. Furthermore, the framework explicitly addresses process and measurement noise, resulting in robust controller synthesis.
- 20 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Control Systems Letters
- Vol. 9, 1219-1224
A Derivative Free Framework for Data-Driven Stabilization of Continuous-Time Linear Systems
This letter presents a novel data-driven framework for the design of control systems in the continuous-time domain. Differently from conventional methodologies that rely on measurements or estimates of the time derivatives of the plant state, the proposed approach utilizes filters of the input and the state of the plant to derive a parameterization for continuous-time linear time-invariant feedback systems. This parameterization is solely dependent on measurable quantities, enabling the direct application of linear matrix inequalities to solve stabilization problems. Furthermore, the framework explicitly addresses process and measurement noise, resulting in robust controller synthesis.
- Open Access
- 25 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Control Systems Letters
- Vol. 8, 412-417
Value Iteration for Linear Quadratic Optimal Control of Single-Input Single-Output Systems via Output Feedback
A value iteration approach based solely on input/output measurements is proposed to solve linear quadratic (LQ) optimal control problems for single-input, single-output (SISO) continuous-time systems. Such an algorithm is designed by coupling an adaptive Luenberger observer with an indirect value iteration architecture. The continuous-time implementation of this controller requires that the gathered estimates are strongly controllable. A hybrid adaptation mechanism is envisioned to overcome such a requirement. The effectiveness of the proposed approach is validated via numerical simulations.
- 25 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Control Systems Letters
- Vol. 8, 412-417
Open AccessValue Iteration for Linear Quadratic Optimal Control of Single-Input Single-Output Systems via Output Feedback
A value iteration approach based solely on input/output measurements is proposed to solve linear quadratic (LQ) optimal control problems for single-input, single-output (SISO) continuous-time systems. Such an algorithm is designed by coupling an adaptive Luenberger observer with an indirect value iteration architecture. The continuous-time implementation of this controller requires that the gathered estimates are strongly controllable. A hybrid adaptation mechanism is envisioned to overcome such a requirement. The effectiveness of the proposed approach is validated via numerical simulations.
- Open Access
- 10 February 2024
- Published by Elsevier in Automatica
- Vol. 163
On the use of the root locus of polynomials with complex coefficients for estimating the basin of attraction for the continuous-time Newton and Householder methods
- 10 February 2024
- Published by Elsevier in Automatica
- Vol. 163
Open AccessOn the use of the root locus of polynomials with complex coefficients for estimating the basin of attraction for the continuous-time Newton and Householder methods
- Open Access
- 29 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Robotics
- Vol. 40 (15523098) , 1758-1773
Parameter Estimation of Nonsmooth Frictionless Impacts Through a Hybrid Observer
Estimating the velocity of a mass involved in nonsmooth impacts is a challenging problem because of their hybrid nature, especially when the restitution coefficient and the orientation of the tangent line at the point of impact are unknown. In this paper, various hybrid observers are proposed for some families of mechanical systems to estimate the velocities, the restitution coefficient, and the orientation of the constraint, under the assumption that only the positions are measured. The stability properties of the corresponding error dynamics are proved, showing semi-global exponential convergence to zero. First, the performance of the proposed observer is tested in some simulation runs. Secondly, the analysis is carried out in experimental tests, by measuring the position of the impacting body through slow and fast camcorders, with a post-processing of the recorded video. A final experimental evaluation is done in real-time with a hardware architecture based on a Raspberry Pi.
- 29 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Robotics
- Vol. 40 (15523098) , 1758-1773
Open AccessParameter Estimation of Nonsmooth Frictionless Impacts Through a Hybrid Observer
Estimating the velocity of a mass involved in nonsmooth impacts is a challenging problem because of their hybrid nature, especially when the restitution coefficient and the orientation of the tangent line at the point of impact are unknown. In this paper, various hybrid observers are proposed for some families of mechanical systems to estimate the velocities, the restitution coefficient, and the orientation of the constraint, under the assumption that only the positions are measured. The stability properties of the corresponding error dynamics are proved, showing semi-global exponential convergence to zero. First, the performance of the proposed observer is tested in some simulation runs. Secondly, the analysis is carried out in experimental tests, by measuring the position of the impacting body through slow and fast camcorders, with a post-processing of the recorded video. A final experimental evaluation is done in real-time with a hardware architecture based on a Raspberry Pi.
- 13 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 84, 2871-2876
A Trajectory-Based Stochastic Approach to Symbolic Control
This paper presents two innovative approaches to design symbolic controllers for dynamical systems. The first novelty involves a new trajectory-based strategy for defining the states of a symbolic model, which provides a more accurate representation of the system's dynamics than the traditional grid-based technique. The second novelty concerns using a Bounded-parameter Markov Decision Process rather than a Finite Transition System to model the behavior of a symbolic model. This procedure allows for handling the system's stochastic behavior and considers uncertainties. The effectiveness of the novel approaches presented is demonstrated through numerical results.
- 13 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 84, 2871-2876
A Trajectory-Based Stochastic Approach to Symbolic Control
This paper presents two innovative approaches to design symbolic controllers for dynamical systems. The first novelty involves a new trajectory-based strategy for defining the states of a symbolic model, which provides a more accurate representation of the system's dynamics than the traditional grid-based technique. The second novelty concerns using a Bounded-parameter Markov Decision Process rather than a Finite Transition System to model the behavior of a symbolic model. This procedure allows for handling the system's stochastic behavior and considers uncertainties. The effectiveness of the novel approaches presented is demonstrated through numerical results.