Mizuki Tenjimbayashi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mizuki Tenjimbayashi has a total of 133 co-authors. Here are the top co-authors by number of shared publications:
- Seimei Shiratori
Center for Material Design Science, School of Integrated Design Engineering, Keio University, 3-14-1 Hiyoshi, Yokohama, 223-8522, Japan
29 shared publications - Kengo Manabe
National Institute of Advanced Industrial Science and Technology (AIST)
20 shared publications Takeshi Matsubayashi
Center for Material Design Science, School of Integrated Design Engineering, Graduate School of Science and Technology, Keio University, 3-14-1 Hiyoshi, Kohoku-ku, Yokohama, Kanagawa 223-8522, Japan
16 shared publicationsTakeo Moriya
Center for Material Design Science, School of Integrated Design Engineering, Graduate School of Science and Technology, Keio University, 3-14-1 Hiyoshi, Kohoku-ku, Yokohama, Kanagawa 223-8522, Japan
11 shared publications- Masanobu Naito
Graduate school of Science and Technology University of Tsukuba Tsukuba Ibaraki Japan
10 shared publications Ryohei Yoshikawa
Center for Material Design Science, School of Integrated Design Engineering, Keio University, 3-14-1 Hiyoshi, Yokohama, 223-8522, Japan
6 shared publications
Latest Publications
- 16 November 2026
- Published by Wiley in Advanced Materials
Armoring Bubbles With Wettability‐Adaptive and Self‐Fusible Particles for Efficient Gas Handling in Air
Mixing small quantities of gas and storing them in air is promising for developing a miniature gas reactor. Bubble encapsulation by liquid film has been considered; however, stabilizing the liquid layer while keeping bubble coalescence ability is challenging. Here, a time‐programmed wettability‐adaptive and self ‐ fusible particle is designed to modulate the coalescence ability and stability of gas bubbles. The adaptive particles remain initially hydrophobic and adsorb on the liquid layer surface, forming a stable gas‐barrier layer. After a modulated time of 10 to 600 s, the particles switch to hydrophilic and absorb available liquid. This adaptive wettability enables capillary‐driven automated coalescence of the contacting bubbles in air. After the preprogrammed time, the diffused particles self‐fuse and provide a continuous gel layer, allowing robust shell formation with tolerance to gas escape for at least 30 days. Proof of concept shows gas/gas and gas/liquid micro‐reactions and their long‐term storage.
- 16 November 2026
- Published by Wiley in Advanced Materials
Armoring Bubbles With Wettability‐Adaptive and Self‐Fusible Particles for Efficient Gas Handling in Air
Mixing small quantities of gas and storing them in air is promising for developing a miniature gas reactor. Bubble encapsulation by liquid film has been considered; however, stabilizing the liquid layer while keeping bubble coalescence ability is challenging. Here, a time‐programmed wettability‐adaptive and self ‐ fusible particle is designed to modulate the coalescence ability and stability of gas bubbles. The adaptive particles remain initially hydrophobic and adsorb on the liquid layer surface, forming a stable gas‐barrier layer. After a modulated time of 10 to 600 s, the particles switch to hydrophilic and absorb available liquid. This adaptive wettability enables capillary‐driven automated coalescence of the contacting bubbles in air. After the preprogrammed time, the diffused particles self‐fuse and provide a continuous gel layer, allowing robust shell formation with tolerance to gas escape for at least 30 days. Proof of concept shows gas/gas and gas/liquid micro‐reactions and their long‐term storage.
- Open Access
- 8 August 2026
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (33) , 24168-24175
Reconfigurable Slippery Gradient Structure for Programmable Droplet Self-Propulsion
Transporting millimeter-sized droplets on a surface is fundamental for droplet fluidics, which requires minimization of droplet sticking and energy input. One promising strategy is tethering the self-propelling ability to droplets on nonsticking surfaces. Self-propulsion is achieved by forming a gradient structure on the substrate. Typically, the gradient is highly directional and nonreprogrammable, making the regulation of transport challenging. Here, we report that droplets are self-propelled from the edge to the center of the substrate. The substrate surface is covered with a stabilized lubricant that exhibits droplet slipperiness. Near the substrate edge, a lubricant thickness gradient forms, which self-propels the droplet. This property enabled the regulated self-propulsion of droplets by spatiotemporal edge-shape design. The edge shape determines the direction of the droplet’s self-propulsion. Moreover, the in situ edge appearance/disappearance, achieved by separating/connecting two neighboring coated substrates, enabled the regulation of self-propelling timing because the lubricant gradient structure is reconfigurable. We demonstrate droplets’ self-climbing, upside-down self-propulsion, in situ stop-and-go motion, two-droplet attractive motion, and reconfigurable two-dimensional droplet motion. We also demonstrate that the sliding droplet on the zigzag-shaped substrate moves along with the substrate’s shape due to edge self-propulsion. These droplet manipulations require no special devices, making them increasingly accessible.
- 8 August 2026
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (33) , 24168-24175
Open AccessReconfigurable Slippery Gradient Structure for Programmable Droplet Self-Propulsion
Transporting millimeter-sized droplets on a surface is fundamental for droplet fluidics, which requires minimization of droplet sticking and energy input. One promising strategy is tethering the self-propelling ability to droplets on nonsticking surfaces. Self-propulsion is achieved by forming a gradient structure on the substrate. Typically, the gradient is highly directional and nonreprogrammable, making the regulation of transport challenging. Here, we report that droplets are self-propelled from the edge to the center of the substrate. The substrate surface is covered with a stabilized lubricant that exhibits droplet slipperiness. Near the substrate edge, a lubricant thickness gradient forms, which self-propels the droplet. This property enabled the regulated self-propulsion of droplets by spatiotemporal edge-shape design. The edge shape determines the direction of the droplet’s self-propulsion. Moreover, the in situ edge appearance/disappearance, achieved by separating/connecting two neighboring coated substrates, enabled the regulation of self-propelling timing because the lubricant gradient structure is reconfigurable. We demonstrate droplets’ self-climbing, upside-down self-propulsion, in situ stop-and-go motion, two-droplet attractive motion, and reconfigurable two-dimensional droplet motion. We also demonstrate that the sliding droplet on the zigzag-shaped substrate moves along with the substrate’s shape due to edge self-propulsion. These droplet manipulations require no special devices, making them increasingly accessible.
- Open Access
- 2 April 2026
- Published by Wiley in Advanced Materials Interfaces
- Vol. 13 (10)
Bistable Wetting States on a Smooth Surface
Droplets on a non‐textured surface typically exhibit a monostable wetting state, as represented by Young state. Here, we show that droplets can exhibit bistability without surface texture by tuning molecular interactions. We investigated the behavior of water droplets on a smooth substrate when immersed in oil. The oil contains hydrophilic interaction components, and their hydrophobic–hydrophilic balance was systematically varied. For oils with a specific hydrophobic–hydrophilic balance, droplet states bifurcate between repellent or sticky depending on the order of droplet casting and oil immersion. These states are neither transient nor one‐off, indicating molecular interactions can create an energetic barrier separating the two states rather than surface textures. Under other oil conditions, the droplet remains monostable, either repellent or sticky, regardless of the order. This work advances the fundamental understanding of molecular effects on droplet behavior and expands surface design strategies in functional materials without compromising mechanical durability.
- 2 April 2026
- Published by Wiley in Advanced Materials Interfaces
- Vol. 13 (10)
Open AccessBistable Wetting States on a Smooth Surface
Droplets on a non‐textured surface typically exhibit a monostable wetting state, as represented by Young state. Here, we show that droplets can exhibit bistability without surface texture by tuning molecular interactions. We investigated the behavior of water droplets on a smooth substrate when immersed in oil. The oil contains hydrophilic interaction components, and their hydrophobic–hydrophilic balance was systematically varied. For oils with a specific hydrophobic–hydrophilic balance, droplet states bifurcate between repellent or sticky depending on the order of droplet casting and oil immersion. These states are neither transient nor one‐off, indicating molecular interactions can create an energetic barrier separating the two states rather than surface textures. Under other oil conditions, the droplet remains monostable, either repellent or sticky, regardless of the order. This work advances the fundamental understanding of molecular effects on droplet behavior and expands surface design strategies in functional materials without compromising mechanical durability.
- Open Access
- 6 November 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (45) , 39398-39406
Manipulating Pico- to Nanoliter Droplets on Surfaces without Sticking
Droplet manipulation on surfaces is ubiquitous in many industrial fields. Liquid-repellent surfaces are required to facilitate manipulation because sticking restricts droplet motion. Various liquid-repellent surfaces have been used to manipulate microliter droplets. However, classical surfaces suffer from the repellence of pico- to nanoliter droplets. This study demonstrates the nonsticking property of pico- to nanoliter droplets on surfaces when it is coated with low-surface-energy particles with nano-micrometer hierarchy. The dynamic particle coating of ultrasonic-sprayed droplets enables the formation of highly spherical, isolated, particle-coated picoliter droplets. The particle coating changes the solid-liquid interfacial friction to solid-solid interfacial friction and reduces the force required to move the droplet to the subnanonewton range. Consequently, picoliter droplets slide off a tilted substrate without sticking. The coating does not affect the fluid shape reconfigurability of the droplets. This approach facilitates diverse and complex multiway manipulation of picoliter droplets, allowing separation, arrangement, transportation, and shape reconfiguration without sticking. This advances the understanding of droplet behavior at interfaces, and the proposed method may contribute to downsizing fluidic systems.
- 6 November 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (45) , 39398-39406
Open AccessManipulating Pico- to Nanoliter Droplets on Surfaces without Sticking
Droplet manipulation on surfaces is ubiquitous in many industrial fields. Liquid-repellent surfaces are required to facilitate manipulation because sticking restricts droplet motion. Various liquid-repellent surfaces have been used to manipulate microliter droplets. However, classical surfaces suffer from the repellence of pico- to nanoliter droplets. This study demonstrates the nonsticking property of pico- to nanoliter droplets on surfaces when it is coated with low-surface-energy particles with nano-micrometer hierarchy. The dynamic particle coating of ultrasonic-sprayed droplets enables the formation of highly spherical, isolated, particle-coated picoliter droplets. The particle coating changes the solid-liquid interfacial friction to solid-solid interfacial friction and reduces the force required to move the droplet to the subnanonewton range. Consequently, picoliter droplets slide off a tilted substrate without sticking. The coating does not affect the fluid shape reconfigurability of the droplets. This approach facilitates diverse and complex multiway manipulation of picoliter droplets, allowing separation, arrangement, transportation, and shape reconfiguration without sticking. This advances the understanding of droplet behavior at interfaces, and the proposed method may contribute to downsizing fluidic systems.
- Open Access
- 25 June 2025
- Published by Springer Nature in Research Square
Manipulating pico- to nanolitre droplets on surfaces without sticking
Many industrial fields require droplets to be manipulated on a surface.1–9 Liquid-repellent surfaces are required to facilitate manipulation because sticking restricts droplet motion. Various liquid-repellent surfaces have been used to manipulate microlitre droplets. However, they are less effective with smaller droplets, which are more sensitive to the chemotopological heterogeneity of the surface, and the reduction of solid–liquid interfacial friction is a limiting factor.10–15 Therefore, a trade-off exists between droplet sticking and droplet volume. Despite previous efforts,16–22 imperfect and non-general nanolitre droplet repellence limits the diversity and complexity of droplet manipulation. This study demonstrates the repellence of pico- to nanolitre droplets coated with low-surface-energy particles with nano–micrometre hierarchy. The coating changes the solid−liquid interfacial friction to solid–solid interfacial friction and reduces the force required to move the droplet. Consequently, picolitre droplets slide off a tilted substrate. The coating does not affect the fluid shape reconfigurability of the droplets. This method can facilitate diverse and complex multi-way manipulation of picolitre droplets, and separation, arrangement, transportation, and shape reconfiguration can be achieved without sticking. This advances the understanding of droplet behaviour at interfaces, and the proposed method may become basic technology underlying downsized fluidic systems.
- 25 June 2025
- Published by Springer Nature in Research Square
Open AccessManipulating pico- to nanolitre droplets on surfaces without sticking
Many industrial fields require droplets to be manipulated on a surface.1–9 Liquid-repellent surfaces are required to facilitate manipulation because sticking restricts droplet motion. Various liquid-repellent surfaces have been used to manipulate microlitre droplets. However, they are less effective with smaller droplets, which are more sensitive to the chemotopological heterogeneity of the surface, and the reduction of solid–liquid interfacial friction is a limiting factor.10–15 Therefore, a trade-off exists between droplet sticking and droplet volume. Despite previous efforts,16–22 imperfect and non-general nanolitre droplet repellence limits the diversity and complexity of droplet manipulation. This study demonstrates the repellence of pico- to nanolitre droplets coated with low-surface-energy particles with nano–micrometre hierarchy. The coating changes the solid−liquid interfacial friction to solid–solid interfacial friction and reduces the force required to move the droplet. Consequently, picolitre droplets slide off a tilted substrate. The coating does not affect the fluid shape reconfigurability of the droplets. This method can facilitate diverse and complex multi-way manipulation of picolitre droplets, and separation, arrangement, transportation, and shape reconfiguration can be achieved without sticking. This advances the understanding of droplet behaviour at interfaces, and the proposed method may become basic technology underlying downsized fluidic systems.
- 9 June 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 126 (23)
Thicker lubricant layer enhances the droplet mobility on lubricant-infused smooth surfaces
Droplets are highly mobile on lubricant-infused surfaces when droplet−lubricant phases are immiscible, and lubricant layer is stable. Recent studies have shown that the high droplet mobility is due to the absence of three-phase contact line friction by oleoplaning of the droplets on the lubricant layer. In this state, dynamic friction arises primarily from viscous dissipation in the lubricant around the droplet. Classical Landau–Levich–Derjaguin (LLD) law suggests that the friction force is proportional to the two-thirds power of the capillary number, and the lubricant thickness effect is not included. Here, we discovered that increased lubricant thickness enhances the droplet's mobility on lubricant-infused surfaces. This finding is unexpected, as a thicker lubricant layer would typically increase the potential volume for viscous dissipation. We formed stable lubricant layers of varying thicknesses ranging from tens to hundreds of micrometers on a “nanometrically smooth” base layer to remove the influence of surface texture. The droplet friction force on the different lubricant thickness surfaces is measured using the cantilever method. While all surfaces follow the LLD law, the friction force significantly decreases with increasing the lubricant thicknesses. The possible reason is the decrement of the energy dissipation at the lubricant ridge with the thickness. We propose a modified friction model incorporating the thickness dependence with the classical law, offering deeper insight into droplet friction dynamics on the lubricant-infused surfaces. In practical terms, reducing droplet friction enhances transport efficiency, contributing to advancements in fluidic systems and liquid-repellent applications.
- 9 June 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 126 (23)
Thicker lubricant layer enhances the droplet mobility on lubricant-infused smooth surfaces
Droplets are highly mobile on lubricant-infused surfaces when droplet−lubricant phases are immiscible, and lubricant layer is stable. Recent studies have shown that the high droplet mobility is due to the absence of three-phase contact line friction by oleoplaning of the droplets on the lubricant layer. In this state, dynamic friction arises primarily from viscous dissipation in the lubricant around the droplet. Classical Landau–Levich–Derjaguin (LLD) law suggests that the friction force is proportional to the two-thirds power of the capillary number, and the lubricant thickness effect is not included. Here, we discovered that increased lubricant thickness enhances the droplet's mobility on lubricant-infused surfaces. This finding is unexpected, as a thicker lubricant layer would typically increase the potential volume for viscous dissipation. We formed stable lubricant layers of varying thicknesses ranging from tens to hundreds of micrometers on a “nanometrically smooth” base layer to remove the influence of surface texture. The droplet friction force on the different lubricant thickness surfaces is measured using the cantilever method. While all surfaces follow the LLD law, the friction force significantly decreases with increasing the lubricant thicknesses. The possible reason is the decrement of the energy dissipation at the lubricant ridge with the thickness. We propose a modified friction model incorporating the thickness dependence with the classical law, offering deeper insight into droplet friction dynamics on the lubricant-infused surfaces. In practical terms, reducing droplet friction enhances transport efficiency, contributing to advancements in fluidic systems and liquid-repellent applications.
- Open Access
- 13 May 2025
- Published by National Academy of Sciences in Proceedings of the National Academy of Sciences
- Vol. 122 (20)
Hot liquid marbles
In the insect realm, liquids become traps due to capillary and viscous forces dominant at their scale. Yet, aphids handle the highly viscous honeydew droplets they secrete by coating them with hydrophobic wax powder which maintains an air layer between their body and the liquid. These coated droplets, known as liquid marbles, exhibit low friction and high mobility, enabling manipulation of small liquid volumes which is useful for biomedical analysis where sample volumes are limited, chemistry to reduce chemical waste, or digital microfluidics for large-scale cell culturing and drug testing. For such applications—including exothermic reactions or biological studies typically conducted above room temperature—the ability to carry hot liquid is important but remains unexplored. This article investigates the stability and static friction of hot liquid marbles placed on a substrate cooler by ∆ T . We show that for large ∆ T , the core liquid evaporates and condenses within the air layer below the marbles creating liquid bridges resulting in marble rupture on hydrophilic substrates and increased static friction on hydrophobic ones. The temperature difference modifies the nature of static friction: solid friction dominates at small ∆ T , while at larger ∆ T , it is replaced by a liquid pinning force caused by the increased liquid bridge density resulting from condensation. Finally, our study provides ways to avoid the rupture and increased static friction of hot liquid marbles due to the bridge formation by increasing the particle size, decreasing the liquid volatility, or using nanostructured superhydrophobic substrates.
- 13 May 2025
- Published by National Academy of Sciences in Proceedings of the National Academy of Sciences
- Vol. 122 (20)
Open AccessHot liquid marbles
In the insect realm, liquids become traps due to capillary and viscous forces dominant at their scale. Yet, aphids handle the highly viscous honeydew droplets they secrete by coating them with hydrophobic wax powder which maintains an air layer between their body and the liquid. These coated droplets, known as liquid marbles, exhibit low friction and high mobility, enabling manipulation of small liquid volumes which is useful for biomedical analysis where sample volumes are limited, chemistry to reduce chemical waste, or digital microfluidics for large-scale cell culturing and drug testing. For such applications—including exothermic reactions or biological studies typically conducted above room temperature—the ability to carry hot liquid is important but remains unexplored. This article investigates the stability and static friction of hot liquid marbles placed on a substrate cooler by ∆ T . We show that for large ∆ T , the core liquid evaporates and condenses within the air layer below the marbles creating liquid bridges resulting in marble rupture on hydrophilic substrates and increased static friction on hydrophobic ones. The temperature difference modifies the nature of static friction: solid friction dominates at small ∆ T , while at larger ∆ T , it is replaced by a liquid pinning force caused by the increased liquid bridge density resulting from condensation. Finally, our study provides ways to avoid the rupture and increased static friction of hot liquid marbles due to the bridge formation by increasing the particle size, decreasing the liquid volatility, or using nanostructured superhydrophobic substrates.
- 1 March 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 126 (11)
Mechanically robust wrinkled liquid marbles
Liquid marble (LM) is a droplet covered with jammed low-wettability fine particles, which exhibits non-sticking to contacting media while keeping its fluid reconfigurability. While the LM facilitated the handling of the droplet, LM breaks down upon squeezing, which limits the robust handling. Here, we show that LM exhibits high compression stability when the jammed particles distort the liquid surface to form sub- to single-micron roughness. We find that the particle layers' distortion increases with the evaporation of the inner liquid. Thus, we regulated the evaporation degree of the droplet by varying the mixing ratio of the nonvolatile and volatile liquids. First, we show the regulation of the mixing ratio and its effect on the equilibrium LM static shape and particle layer structure. Then, the effect of the LMs' surface structure on their mechanical response is explored. When 90% of the inner liquid is evaporated, the submicrometer wrinkle structure appears on the LM surface. We name the LM with the wrinkle structure “wrinkled liquid marble (WLM).” The WLM exhibited high compression stability and significantly higher resilience force than the droplet one. We believe this work helps the practical use of the LMs by improving their mechanical stability. Moreover, the fundamental understanding of the particle layer stability at the interface can be advanced.
- 1 March 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 126 (11)
Mechanically robust wrinkled liquid marbles
Liquid marble (LM) is a droplet covered with jammed low-wettability fine particles, which exhibits non-sticking to contacting media while keeping its fluid reconfigurability. While the LM facilitated the handling of the droplet, LM breaks down upon squeezing, which limits the robust handling. Here, we show that LM exhibits high compression stability when the jammed particles distort the liquid surface to form sub- to single-micron roughness. We find that the particle layers' distortion increases with the evaporation of the inner liquid. Thus, we regulated the evaporation degree of the droplet by varying the mixing ratio of the nonvolatile and volatile liquids. First, we show the regulation of the mixing ratio and its effect on the equilibrium LM static shape and particle layer structure. Then, the effect of the LMs' surface structure on their mechanical response is explored. When 90% of the inner liquid is evaporated, the submicrometer wrinkle structure appears on the LM surface. We name the LM with the wrinkle structure “wrinkled liquid marble (WLM).” The WLM exhibited high compression stability and significantly higher resilience force than the droplet one. We believe this work helps the practical use of the LMs by improving their mechanical stability. Moreover, the fundamental understanding of the particle layer stability at the interface can be advanced.
- Open Access
- 29 August 2024
- Published by Wiley in Advanced Science
- Vol. 11 (40) , e2405151
Syneresis‐Driven Self‐Refilling Printing of Geometry/Component‐Controlled Nano/Microstructures
Nano/microfabrication is of fundamental importance both in scientific and industrial situations. There are, therefore, many attempts at realizing easier, quicker, and more precise fabrication of various structures; however, achieving this aim without a bulky and costly setup is still challenging. Here, we introduce a facile and versatile means of printing an ordered structure consisting of nanoscale stripes and more complicated geometries including pillars and wavy form with a lateral resolution of single micrometers. To this end, we prepare a polydimethylsiloxane (PDMS) slab with an oxygen plasma‐induced wrinkled surface where liquid PDMS exudes by syneresis. Since this liquid PDMS is automatically loaded, the printing is repeatable without inking. A substrate moderately wettable to the liquid PDMS as well as amount/property‐controlled syneresis is primarily important for the creation of well‐defined structures. Precisely controlling these conditions will make this method universally applicable to diverse substrates and liquids including suspensions.
- 29 August 2024
- Published by Wiley in Advanced Science
- Vol. 11 (40) , e2405151
Open AccessSyneresis‐Driven Self‐Refilling Printing of Geometry/Component‐Controlled Nano/Microstructures
Nano/microfabrication is of fundamental importance both in scientific and industrial situations. There are, therefore, many attempts at realizing easier, quicker, and more precise fabrication of various structures; however, achieving this aim without a bulky and costly setup is still challenging. Here, we introduce a facile and versatile means of printing an ordered structure consisting of nanoscale stripes and more complicated geometries including pillars and wavy form with a lateral resolution of single micrometers. To this end, we prepare a polydimethylsiloxane (PDMS) slab with an oxygen plasma‐induced wrinkled surface where liquid PDMS exudes by syneresis. Since this liquid PDMS is automatically loaded, the printing is repeatable without inking. A substrate moderately wettable to the liquid PDMS as well as amount/property‐controlled syneresis is primarily important for the creation of well‐defined structures. Precisely controlling these conditions will make this method universally applicable to diverse substrates and liquids including suspensions.
- Open Access
- 19 July 2024
- Published by Springer Nature in Research Square
Emergence of branched wetting states on a smooth surface
When the droplet is cast on the solid surfaces, part of the droplet/solid surface is replaced by their interface, and a wide variety of shapes and adhesion modes, from spreading1, sticky2, to super-repellent3, appears. In principle, droplets on a smooth surface exhibit a single wetting state. According to Young's law in 1805 4, the shape of a droplet, quantified with contact angle, is determined by the balance of substance-specific interfacial energies between three phases of a droplet, contacting solid surface and surrounding media4. Contact angles fluctuate due to external disturbance and the mobility of contact line 5, but the applicable range is generally fixed, which features the adhesion mode of the droplet. Here we show the emergence of branched wetting states with different contact angle ranges using the same droplet and surrounding media on a smooth, homogeneous surface. The applicable wetting states are high-contact angle droplet sticks to the surface or repellent, akin to the Wenzel 6 or Cassie 7 states observed on a nano/micro-textured surface, respectively. The phenomenon is commonly observed when site-specific molecular interactions trap the droplet metastable —the wettability branches when the interface formation order changes. This is because the molecular interactions at interfaces cause hysteresis in phase replacement under certain wettability conditions. Our experiment varied the combination and number of interaction molecules in phases, unravelling the design principles of the branched wettability. This work suggests that the site-specific molecular interaction can bifurcate macroscopic wetting modes, which advances the fundamental understanding of the molecular effect on macro-wettability.
- 19 July 2024
- Published by Springer Nature in Research Square
Open AccessEmergence of branched wetting states on a smooth surface
When the droplet is cast on the solid surfaces, part of the droplet/solid surface is replaced by their interface, and a wide variety of shapes and adhesion modes, from spreading1, sticky2, to super-repellent3, appears. In principle, droplets on a smooth surface exhibit a single wetting state. According to Young's law in 1805 4, the shape of a droplet, quantified with contact angle, is determined by the balance of substance-specific interfacial energies between three phases of a droplet, contacting solid surface and surrounding media4. Contact angles fluctuate due to external disturbance and the mobility of contact line 5, but the applicable range is generally fixed, which features the adhesion mode of the droplet. Here we show the emergence of branched wetting states with different contact angle ranges using the same droplet and surrounding media on a smooth, homogeneous surface. The applicable wetting states are high-contact angle droplet sticks to the surface or repellent, akin to the Wenzel 6 or Cassie 7 states observed on a nano/micro-textured surface, respectively. The phenomenon is commonly observed when site-specific molecular interactions trap the droplet metastable —the wettability branches when the interface formation order changes. This is because the molecular interactions at interfaces cause hysteresis in phase replacement under certain wettability conditions. Our experiment varied the combination and number of interaction molecules in phases, unravelling the design principles of the branched wettability. This work suggests that the site-specific molecular interaction can bifurcate macroscopic wetting modes, which advances the fundamental understanding of the molecular effect on macro-wettability.