Meenakshi Halada Nandakrishnan
Research Subjects
Meenakshi Halada Nandakrishnan has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
Preeti Nair
Centre for Incubation, Innovation, Research and Consultancy, Jyothy Institute of Technology, Tataguni, Bangalore, India
4 shared publicationsNandhini Dhanavel
Centre for Incubation, Innovation, Research and Consultancy, Jyothy Institute of Technology, Tataguni, Bangalore, India
2 shared publications- Narendra Reddy
Center for Incubation Innovation Research and Consultancy Jyothy Institute of Technology Bengaluru India
2 shared publications Anisha Anand
Department of Chemistry, Avinashilingam Institute for Home Science and Higher Education for Women University, Coimbatore, Tamilnadu 641043, India
1 shared publicationDhanavel Nandhini
Center for Incubation, Innovation, Research and Consultancy Jyothy Institute of Technology Bengaluru India
1 shared publication- Divya Nataraj1 shared publication
Latest Publications
- 1 June 2025
- Published by Wiley in Materialwissenschaft und Werkstofftechnik
- Vol. 56 (6) , 860-868
Automotive fluoroelastomers and butanol‐gasoline blends ‐ a material compatibility study
Automotive Fluoroelastomers are usually made up of copolymers of hexafluoropropylene (HFP) and vinylidene fluoride (VDF); terpolymers of hexafluoropropylene, vinylidene fluoride and tetrafluoroethylene (TFE) as well as perfluoro(methyl vinyl ether) (PMVE) and certain additives. The fluorine content in them varies from 66 % to 70 %. Because of their remarkable resistance to both heat and chemicals, they are suggested for many applications where these qualities are required. These are some of the most suited materials to be used as gaskets, gasoline hoses, O‐rings and seals in automotive (both air and land) and oil sectors. Since the main purpose of these materials is to serve as barriers, understanding how they behave in the presence of alcoholic fuel mixes is crucial since the physicochemical degradation of the fluoroelastomer affects their mechanical qualities. The goal of this work is do an in‐depth analysis of behavior of polymer when exposed to ethanol‐butanol‐gasoline (EB), methanol‐butanol‐gasoline (MB) and acetone‐butanol‐gasoline (ABE) blends. The coupons were immersed in these fuel blends for 4 days, 30 days and 90 days. The coupons were analyzed for mass changes and change in mechanical quality The variation in the properties of polymer were analyzed using Fourier transform infrared spectroscopy (FTIR), x‐ray diffraction (XRD), thermogravimetric analysis (TGA) and scanning electron microscope (SEM) analysis.
- 1 June 2025
- Published by Wiley in Materialwissenschaft und Werkstofftechnik
- Vol. 56 (6) , 860-868
Automotive fluoroelastomers and butanol‐gasoline blends ‐ a material compatibility study
Automotive Fluoroelastomers are usually made up of copolymers of hexafluoropropylene (HFP) and vinylidene fluoride (VDF); terpolymers of hexafluoropropylene, vinylidene fluoride and tetrafluoroethylene (TFE) as well as perfluoro(methyl vinyl ether) (PMVE) and certain additives. The fluorine content in them varies from 66 % to 70 %. Because of their remarkable resistance to both heat and chemicals, they are suggested for many applications where these qualities are required. These are some of the most suited materials to be used as gaskets, gasoline hoses, O‐rings and seals in automotive (both air and land) and oil sectors. Since the main purpose of these materials is to serve as barriers, understanding how they behave in the presence of alcoholic fuel mixes is crucial since the physicochemical degradation of the fluoroelastomer affects their mechanical qualities. The goal of this work is do an in‐depth analysis of behavior of polymer when exposed to ethanol‐butanol‐gasoline (EB), methanol‐butanol‐gasoline (MB) and acetone‐butanol‐gasoline (ABE) blends. The coupons were immersed in these fuel blends for 4 days, 30 days and 90 days. The coupons were analyzed for mass changes and change in mechanical quality The variation in the properties of polymer were analyzed using Fourier transform infrared spectroscopy (FTIR), x‐ray diffraction (XRD), thermogravimetric analysis (TGA) and scanning electron microscope (SEM) analysis.
- 3 February 2025
- Published by Wiley in Journal of the American Oil Chemists' Society
- Vol. 102 (5) , 941-956
Optimization analysis of epoxidation of silkworm pupae oil with citric acid and eco‐friendly oil coating on mild steel for corrosion protection
Silkworm pupae oil (SPO) with high amount of unsaturation due to rich in oleic acid and α‐linolenic acids has been chosen for this investigation. Epoxidized silkworm pupae oil (ESPO) was produced by in situ generated peroxycitric with citric acid (CA) and hydrogen peroxide (H2O2). Literature covering the topic of epoxidation, including the catalytic aspect, is vast. No review articles have been written on the synthesis of epoxides from SPO without the catalyst to the best of our knowledge. Here, CA itself behaves as an oxygen carrier without any catalyst and H2O2 as an oxygen donor, which favors the epoxidation reaction. The epoxidation process was optimized by factors like temperature, time, and CA ratio. Fourier transform infrared (FTIR) analysis confirmed the presence of epoxy groups and the absence of (CC) bonds in ESPO. Optimal conditions for epoxidation were 70 °C, 0.75 mol/L CA, and 7 h, resulting in 92.1% double bond conversion (DBC) and 84.7% relative oxirane conversion (RC). The polymerized ESPO coated on mild steel (MS) exhibited enhanced corrosion resistance, with inhibition efficiency rising from 83.86% to 99.42% due to effective pore prevention and ion modification during curing.
- 3 February 2025
- Published by Wiley in Journal of the American Oil Chemists' Society
- Vol. 102 (5) , 941-956
Optimization analysis of epoxidation of silkworm pupae oil with citric acid and eco‐friendly oil coating on mild steel for corrosion protection
Silkworm pupae oil (SPO) with high amount of unsaturation due to rich in oleic acid and α‐linolenic acids has been chosen for this investigation. Epoxidized silkworm pupae oil (ESPO) was produced by in situ generated peroxycitric with citric acid (CA) and hydrogen peroxide (H2O2). Literature covering the topic of epoxidation, including the catalytic aspect, is vast. No review articles have been written on the synthesis of epoxides from SPO without the catalyst to the best of our knowledge. Here, CA itself behaves as an oxygen carrier without any catalyst and H2O2 as an oxygen donor, which favors the epoxidation reaction. The epoxidation process was optimized by factors like temperature, time, and CA ratio. Fourier transform infrared (FTIR) analysis confirmed the presence of epoxy groups and the absence of (CC) bonds in ESPO. Optimal conditions for epoxidation were 70 °C, 0.75 mol/L CA, and 7 h, resulting in 92.1% double bond conversion (DBC) and 84.7% relative oxirane conversion (RC). The polymerized ESPO coated on mild steel (MS) exhibited enhanced corrosion resistance, with inhibition efficiency rising from 83.86% to 99.42% due to effective pore prevention and ion modification during curing.
- 12 December 2024
- Published by Brazilian Journal of Analytical Chemistry in Brazilian Journal of Analytical Chemistry
- Vol. 12 (46) , 50-74
An Ecofriendly Potentiometric Technique to Measure the Iodine Values of Animal Fats
The development of green analytical methods is becoming increasingly important in today’s world as we strive to reduce our environmental impact. Wijs’s method is one of the analytical experiments used to determine the iodine value in fat/oil contribute to the environmental impact and are not aligned with the growing demand for eco-friendly practices. The problem that is being addressed is the environmental damage caused by the use of toxic chemicals from traditional chemical methods in analytical experiments. The developed green potentiometric method for determining the iodine value in animal fats yielded notable results. Comparative analysis of the iodine values (g I2/100 g of oil) of Silkworm pupae oil (SPO), Black soldier larvae oil (BSLO), Milk scum oil (MSO) and Chicken fat oil (CFO) obtained from the traditional Wijs method (Wijs manual WM and Wijs auto WA) and the green method (Green manual GM and Green auto GA) showed close agreement. Students’t-test and Snedecor F test were performed and confirmed the accuracy of the four methods at a confidence level of 95% and 99%. The comparable results obtained from the green method validate its accuracy and reliability. Additionally, Fourier-transform infrared spectroscopy (FTIR) and gas chromatography-mass spectrometry (GC-MS) analysis enhanced the understanding of unsaturation levels in animal fats and contributing to a comprehensive assessment of their composition and properties. Moreover, the greenness of analytical procedures was evaluated by Green Analytical Procedure Index (GAPI) and Analytical GREEnness calculator (AGREE). This study advances greener analytical methods and facilitates the analysis of animal fats in various research and industrial applications.
- 12 December 2024
- Published by Brazilian Journal of Analytical Chemistry in Brazilian Journal of Analytical Chemistry
- Vol. 12 (46) , 50-74
An Ecofriendly Potentiometric Technique to Measure the Iodine Values of Animal Fats
The development of green analytical methods is becoming increasingly important in today’s world as we strive to reduce our environmental impact. Wijs’s method is one of the analytical experiments used to determine the iodine value in fat/oil contribute to the environmental impact and are not aligned with the growing demand for eco-friendly practices. The problem that is being addressed is the environmental damage caused by the use of toxic chemicals from traditional chemical methods in analytical experiments. The developed green potentiometric method for determining the iodine value in animal fats yielded notable results. Comparative analysis of the iodine values (g I2/100 g of oil) of Silkworm pupae oil (SPO), Black soldier larvae oil (BSLO), Milk scum oil (MSO) and Chicken fat oil (CFO) obtained from the traditional Wijs method (Wijs manual WM and Wijs auto WA) and the green method (Green manual GM and Green auto GA) showed close agreement. Students’t-test and Snedecor F test were performed and confirmed the accuracy of the four methods at a confidence level of 95% and 99%. The comparable results obtained from the green method validate its accuracy and reliability. Additionally, Fourier-transform infrared spectroscopy (FTIR) and gas chromatography-mass spectrometry (GC-MS) analysis enhanced the understanding of unsaturation levels in animal fats and contributing to a comprehensive assessment of their composition and properties. Moreover, the greenness of analytical procedures was evaluated by Green Analytical Procedure Index (GAPI) and Analytical GREEnness calculator (AGREE). This study advances greener analytical methods and facilitates the analysis of animal fats in various research and industrial applications.
- 17 November 2023
- Published by Springer Nature in Chemical Papers
- Vol. 78 (3) , 1517-1527
Electrochemical studies on the corrosion performance of ternary ethanol–butanol–gasoline and methanol–butanol–gasoline blends
- 17 November 2023
- Published by Springer Nature in Chemical Papers
- Vol. 78 (3) , 1517-1527
Electrochemical studies on the corrosion performance of ternary ethanol–butanol–gasoline and methanol–butanol–gasoline blends
- 25 July 2023
- Published by SAGE Publications in Journal of Elastomers & Plastics
- Vol. 55 (7) , 1077-1095
High density polyethylene and butanol-gasoline blends: A material compatibility study
We are now well on the path of transitioning away from the fossil fuel resources on cutting down their consumption as much as possible. The fuels chosen for this study include ethanol-butanol (EB) -gasoline, acetone-butanol-ethanol (ABE) -gasoline and methanol-butanol (MB) -gasoline blends. High density polyethylene (HDPE) is a polymer that is extensively used in several auto parts and fuelling infrastructure materials. Incompatibility between these blends and fueling infrastructure system should be studied comprehensively for the adoption of these alternative fuels to be faster and hassle free. This study intends to gauge the changes in HDPE because of its immersion in the gasoline-alcohol blends mentioned for a period of 4, 30 & 90 days. The changes were ascertained by studying the mass, tensile strength, elongation, and hardness of the samples before and after immersion into blends. Sophisticated techniques were used to characterize the morphological and chemical changes of the polymer. The results showed that there was an increase in the mass of the HDPE samples as a result of the absorption of the blends by the polymeric samples. A decrease in tensile strength and hardness values were recorded for the samples whereas the elongation values were found to increase. Studies revealed that there was neither fuel degradation nor any oxidative degradation of the polymeric sample. The results indicated an increase in the mass and elongation of the HDPE as a result of the absorption of the fuel leads to lesser stable polymeric matrix and decrease in the percentage crystallinity. Hence this investigation led us to the conclusion that all the fuels blends studied are highly compatible with HDPE, even in instances where a change in the mechanical properties is seen, it is similar to that seen in gasoline.
- 25 July 2023
- Published by SAGE Publications in Journal of Elastomers & Plastics
- Vol. 55 (7) , 1077-1095
High density polyethylene and butanol-gasoline blends: A material compatibility study
We are now well on the path of transitioning away from the fossil fuel resources on cutting down their consumption as much as possible. The fuels chosen for this study include ethanol-butanol (EB) -gasoline, acetone-butanol-ethanol (ABE) -gasoline and methanol-butanol (MB) -gasoline blends. High density polyethylene (HDPE) is a polymer that is extensively used in several auto parts and fuelling infrastructure materials. Incompatibility between these blends and fueling infrastructure system should be studied comprehensively for the adoption of these alternative fuels to be faster and hassle free. This study intends to gauge the changes in HDPE because of its immersion in the gasoline-alcohol blends mentioned for a period of 4, 30 & 90 days. The changes were ascertained by studying the mass, tensile strength, elongation, and hardness of the samples before and after immersion into blends. Sophisticated techniques were used to characterize the morphological and chemical changes of the polymer. The results showed that there was an increase in the mass of the HDPE samples as a result of the absorption of the blends by the polymeric samples. A decrease in tensile strength and hardness values were recorded for the samples whereas the elongation values were found to increase. Studies revealed that there was neither fuel degradation nor any oxidative degradation of the polymeric sample. The results indicated an increase in the mass and elongation of the HDPE as a result of the absorption of the fuel leads to lesser stable polymeric matrix and decrease in the percentage crystallinity. Hence this investigation led us to the conclusion that all the fuels blends studied are highly compatible with HDPE, even in instances where a change in the mechanical properties is seen, it is similar to that seen in gasoline.
- 14 October 2022
- Published by Wiley in Biofuels, Bioproducts and Biorefining
- Vol. 17 (1) , 167-177
Spent silkworm pupae as a renewable and sustainable source for biodiesel
Global silk production generates about 1 million tons of spent pupae annually that are generally discarded as waste but could be used to generate about 240 million liters of biodiesel every year. Spent pupae contain about 30–40% oil, 30–40% proteins and about 20–30% carbohydrates which comprise a low‐cost, renewable and sustainable source for production of biofuels, particularly biodiesel. Some studies indicate the potential of converting the pupa oil into biodiesel but there are no reports on the detailed characteristics and the properties and performance of the pupa biodiesel. In this study, oil was obtained from the pupae using mechanical and Soxhlet extraction with yield of up to 95%. The oil was transesterified using acid and alkaline catalysts under different processing conditions. A conversion ratio of more than 90% from oil to biodiesel was possible. Pupae diesel had characteristics similar to regular synthetic‐based diesel with calorific value of between 44 41 MJ kg−1. Pupae diesel was blended up to 50% with regular diesel and performance of the pure and blended fuel was tested on an engine test rig. Engine performance tests showed that the pupa diesel did not compromise the efficiency and produced emissions within the stipulated standards. © 2022 Society of Chemical Industry and John Wiley & Sons, Ltd.
- 14 October 2022
- Published by Wiley in Biofuels, Bioproducts and Biorefining
- Vol. 17 (1) , 167-177
Spent silkworm pupae as a renewable and sustainable source for biodiesel
Global silk production generates about 1 million tons of spent pupae annually that are generally discarded as waste but could be used to generate about 240 million liters of biodiesel every year. Spent pupae contain about 30–40% oil, 30–40% proteins and about 20–30% carbohydrates which comprise a low‐cost, renewable and sustainable source for production of biofuels, particularly biodiesel. Some studies indicate the potential of converting the pupa oil into biodiesel but there are no reports on the detailed characteristics and the properties and performance of the pupa biodiesel. In this study, oil was obtained from the pupae using mechanical and Soxhlet extraction with yield of up to 95%. The oil was transesterified using acid and alkaline catalysts under different processing conditions. A conversion ratio of more than 90% from oil to biodiesel was possible. Pupae diesel had characteristics similar to regular synthetic‐based diesel with calorific value of between 44 41 MJ kg−1. Pupae diesel was blended up to 50% with regular diesel and performance of the pure and blended fuel was tested on an engine test rig. Engine performance tests showed that the pupa diesel did not compromise the efficiency and produced emissions within the stipulated standards. © 2022 Society of Chemical Industry and John Wiley & Sons, Ltd.
- 12 January 2022
- Published by SAGE Publications in Journal of Elastomers & Plastics
- Vol. 54 (4) , 605-619
Exposure of thermoplastics to methanol–gasoline blends: A material compatibility study
Alcohols are increasingly being looked upon as the most viable alternative to the conventional sources of energy. Methanol is the first member of the alcohol family and can be easily synthesized from syngas. It is an attractive blend to gasoline due to its advantageous properties. There is a necessity to make sure that the infrastructure is ready to adapt these alternative fuels. Hence, the aim of this study is to assess the degradation of widely used thermoplastics in fuel tanks, pipes, and the fuel injection system, namely, polytetrafluoroethylene (PTFE), polyethyleneterephthalate (PET), and high density polyethylene (HDPE) post exposure to methanol–gasoline blends (P100, M15, and M30) for a period of 4, 10, and 30 days. The effects of the exposure were examined by comparing changes in gain/loss of mass, hardness, elongation, and tensile strength. The surface morphology changes of the polymeric coupons were characterized by scanning electron microscopy and their elemental analysis was done by energy dispersive X-ray spectroscopy. The studied materials were found to gain mass in the order HDPE > PTFE >PET. The decrease in hardness was found to be more in HDPE followed by PTFE and PET. PTFE and PET showed reduction in strength but an increase in tensile strength was observed for HDPE post exposure to fuel blend. Highest change in elongation was found in HDPE followed by PTFE and PET. The changes were found to be the least in P100 followed by M15 and maximum in M30 blends for all immersion periods.
- 12 January 2022
- Published by SAGE Publications in Journal of Elastomers & Plastics
- Vol. 54 (4) , 605-619
Exposure of thermoplastics to methanol–gasoline blends: A material compatibility study
Alcohols are increasingly being looked upon as the most viable alternative to the conventional sources of energy. Methanol is the first member of the alcohol family and can be easily synthesized from syngas. It is an attractive blend to gasoline due to its advantageous properties. There is a necessity to make sure that the infrastructure is ready to adapt these alternative fuels. Hence, the aim of this study is to assess the degradation of widely used thermoplastics in fuel tanks, pipes, and the fuel injection system, namely, polytetrafluoroethylene (PTFE), polyethyleneterephthalate (PET), and high density polyethylene (HDPE) post exposure to methanol–gasoline blends (P100, M15, and M30) for a period of 4, 10, and 30 days. The effects of the exposure were examined by comparing changes in gain/loss of mass, hardness, elongation, and tensile strength. The surface morphology changes of the polymeric coupons were characterized by scanning electron microscopy and their elemental analysis was done by energy dispersive X-ray spectroscopy. The studied materials were found to gain mass in the order HDPE > PTFE >PET. The decrease in hardness was found to be more in HDPE followed by PTFE and PET. PTFE and PET showed reduction in strength but an increase in tensile strength was observed for HDPE post exposure to fuel blend. Highest change in elongation was found in HDPE followed by PTFE and PET. The changes were found to be the least in P100 followed by M15 and maximum in M30 blends for all immersion periods.
- 5 February 2021
- Published by Springer Nature
- p. 393-401
Corrosion Behavior of Brass in Methanol-Gasoline Fuel Blends
- 5 February 2021
- Published by Springer Nature
- p. 393-401
Corrosion Behavior of Brass in Methanol-Gasoline Fuel Blends
- 26 January 2021
- Published by Taylor & Francis in International Journal of Ambient Energy
- Vol. 43 (1) , 4207-4223
Review on the synthesis, performance and trends of butanol: a cleaner fuel additive for gasoline
Alcohols as fuels have generated a lot of interest and considerable amount of research has been done in the past few years on various alcohols being used as blends with gasoline and diesel in spark ignition (SI) and compression ignition (CI) engine respectively. This paper reviews all the aspects pertaining to using butanol right from its synthesis and comparison between the properties of first five members of the alcohol family. The findings of some of the experiments with butanol blended gasoline fuel (SI engine) are summarized. The paper also discusses the various compatibility issues that might crop up due to the interaction of the fuel with the existing engines and fueling infrastructure. It has been concluded that the butanol can indeed serve as a practical alternative to gasoline and it would be beneficial in cutting down the toxic emissions from the vehicles.
- 26 January 2021
- Published by Taylor & Francis in International Journal of Ambient Energy
- Vol. 43 (1) , 4207-4223
Review on the synthesis, performance and trends of butanol: a cleaner fuel additive for gasoline
Alcohols as fuels have generated a lot of interest and considerable amount of research has been done in the past few years on various alcohols being used as blends with gasoline and diesel in spark ignition (SI) and compression ignition (CI) engine respectively. This paper reviews all the aspects pertaining to using butanol right from its synthesis and comparison between the properties of first five members of the alcohol family. The findings of some of the experiments with butanol blended gasoline fuel (SI engine) are summarized. The paper also discusses the various compatibility issues that might crop up due to the interaction of the fuel with the existing engines and fueling infrastructure. It has been concluded that the butanol can indeed serve as a practical alternative to gasoline and it would be beneficial in cutting down the toxic emissions from the vehicles.
- 1 November 2018
- Published by Elsevier in Industrial Crops and Products
- Vol. 124, 265-272
Properties and applications of citric acid crosslinked banana fibre-wheat gluten films
- 1 November 2018
- Published by Elsevier in Industrial Crops and Products
- Vol. 124, 265-272
Properties and applications of citric acid crosslinked banana fibre-wheat gluten films