Srinivasan Ramakrishnan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Srinivasan Ramakrishnan has a total of 54 co-authors. Here are the top co-authors by number of shared publications:
- Bryan D. McCloskey
University of California, Berkeley
4 shared publications - Christopher E. D. Chidsey
Department of Chemistry, Stanford University , Stanford, California 94305, United States
4 shared publications - Prateek Saini
Department of Chemistry Indian Institute of Technology Bombay, Powai Mumbai India
4 shared publications Byungchun Park
Department of Chemical and Biomolecular Engineering, University of California Berkeley, Berkeley, California 94720, United States
3 shared publications- Maravanji Shivaramaiah Balakrishna
Phosphorus Laboratory, Department of Chemistry, Indian Institute of Technology Bombay, Powai, Mumbai 400076, India
3 shared publications - Robert M. Waymouth
Department of Chemistry Stanford University California USA
3 shared publications
Latest Publications
- 6 October 2026
- Published by American Chemical Society (ACS) in ACS Electrochemistry
- Vol. 2 (11) , 2686-2695
Mechanistic Divergence in TEMPO-Mediated Electrocatalytic Formate Oxidation
TEMPO (2,2,6,6-tetramethylpiperidin-1-oxyl) has been widely used as a mediator for electrocatalytic oxidation of alcohols and amines at inert electrode surfaces, operating through an established mechanism in which an exogenous base facilitates the final proton-coupled electron transfer step that regenerates TEMPO from its N–OH intermediate. Here, we report a detailed mechanistic study of TEMPO-mediated electrocatalytic formate oxidation in aprotic, nonaqueous environments, which proceeds with ∼87% Faradaic efficiency toward CO2 in acetonitrile. Cyclic voltammetry further reveals catalytic turnover at formate concentrations as low as 1 mM, with a 14-fold current enhancement at 100 mM formate, indicative of exceptionally fast catalytic rates. Unlike the established alcohol oxidation pathway, formate oxidation proceeds through a mechanistically distinct, base-independent route: formate itself serves as the terminal base, and the reaction is sensitive to the H-bond donating character of the medium. DFT calculations reveal that a key structural signature of this divergence is the close N–Oformate contact in the TEMPO+-formate adduct intermediate, which is disrupted in polar protic solvents that compete for H-bonding. Finite-element simulations of the CV data corroborate the proposed mechanisms and quantify the rate constants for the elementary steps.
- 6 October 2026
- Published by American Chemical Society (ACS) in ACS Electrochemistry
- Vol. 2 (11) , 2686-2695
Mechanistic Divergence in TEMPO-Mediated Electrocatalytic Formate Oxidation
TEMPO (2,2,6,6-tetramethylpiperidin-1-oxyl) has been widely used as a mediator for electrocatalytic oxidation of alcohols and amines at inert electrode surfaces, operating through an established mechanism in which an exogenous base facilitates the final proton-coupled electron transfer step that regenerates TEMPO from its N–OH intermediate. Here, we report a detailed mechanistic study of TEMPO-mediated electrocatalytic formate oxidation in aprotic, nonaqueous environments, which proceeds with ∼87% Faradaic efficiency toward CO2 in acetonitrile. Cyclic voltammetry further reveals catalytic turnover at formate concentrations as low as 1 mM, with a 14-fold current enhancement at 100 mM formate, indicative of exceptionally fast catalytic rates. Unlike the established alcohol oxidation pathway, formate oxidation proceeds through a mechanistically distinct, base-independent route: formate itself serves as the terminal base, and the reaction is sensitive to the H-bond donating character of the medium. DFT calculations reveal that a key structural signature of this divergence is the close N–Oformate contact in the TEMPO+-formate adduct intermediate, which is disrupted in polar protic solvents that compete for H-bonding. Finite-element simulations of the CV data corroborate the proposed mechanisms and quantify the rate constants for the elementary steps.
- Open Access
- 17 August 2026
- Published by Wiley in Advanced Science
Electrochemically Driven Regioselective Radical Functionalization of Allenes: Scope and Mechanistic Insights
Despite their rich reactivity and unique cumulated π ‐system, allenes remain largely untapped platforms in electrochemical radical functionalizations. Herein, we report a regioselective electrochemical protocol that merges radical addition with anodic oxidative cyclization, enabling the construction of oxazoline and oxazolidine‐2‐imine frameworks under mild and sustainable conditions. Detailed mechanistic investigations along with DFT computational studies were carried out to probe the reaction pathway. These studies suggested selective radical addition at the central allenic carbon, forming an allyl radical intermediate that undergoes anodic oxidation and intramolecular nucleophilic cyclization, enabling efficient access to functionalized heterocyclic derivatives without external oxidants. This work unveils a new paradigm for electrochemically driven allene functionalization, expanding the scope of radical‐mediated electroorganic synthesis toward biologically relevant moieties.
- 17 August 2026
- Published by Wiley in Advanced Science
Open AccessElectrochemically Driven Regioselective Radical Functionalization of Allenes: Scope and Mechanistic Insights
Despite their rich reactivity and unique cumulated π ‐system, allenes remain largely untapped platforms in electrochemical radical functionalizations. Herein, we report a regioselective electrochemical protocol that merges radical addition with anodic oxidative cyclization, enabling the construction of oxazoline and oxazolidine‐2‐imine frameworks under mild and sustainable conditions. Detailed mechanistic investigations along with DFT computational studies were carried out to probe the reaction pathway. These studies suggested selective radical addition at the central allenic carbon, forming an allyl radical intermediate that undergoes anodic oxidation and intramolecular nucleophilic cyclization, enabling efficient access to functionalized heterocyclic derivatives without external oxidants. This work unveils a new paradigm for electrochemically driven allene functionalization, expanding the scope of radical‐mediated electroorganic synthesis toward biologically relevant moieties.
- 29 March 2026
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 38 (7) , 3774-3785
Influence of Metastable Disorder in Titanium Oxyhydroxides on High-Rate Sodium Ion Storage
- 29 March 2026
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 38 (7) , 3774-3785
Influence of Metastable Disorder in Titanium Oxyhydroxides on High-Rate Sodium Ion Storage
- 27 February 2026
- Published by American Chemical Society (ACS)
- Vol. 11 (3) , 2359-2364
Battery Research at IIT Bombay: From Fundamental Electrochemistry to Scalable Energy Storage
- 27 February 2026
- Published by American Chemical Society (ACS)
- Vol. 11 (3) , 2359-2364
Battery Research at IIT Bombay: From Fundamental Electrochemistry to Scalable Energy Storage
- Open Access
- 9 December 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Ligand Fluxionality in a Coordinatively Saturated Iron Complex Enables Selective Electrocatalytic Reduction of CO2 to Formate
Transition metal complexes for small molecule activation are typically designed with an open coordination site at the metal center for substrate binding and activation. Herein we show that a coordinatively saturated Fe(II) tris(bipyridine) complex, [L3Fe]2+ (L=2,2’-bipyridine, abbr. bpy), catalyzes the selective and facile electroreduction of CO2 to formate via electron transfer-induced ligand fluxionality of the bpy scaffold. In a coordinating solvent, electrochemical reduction induces partial dissociation of a bipyridine ligand, creating transient binding sites that enable CO2-to-formate conversion with <1% H2 at low overpotentials. Cyclic voltammetry, finite-element simulations and DFT calculations reveal that the timescale of ligand dissociation and coordinating properties of the dielectric medium are critical for the observed activity. We further show that the extent of bpy dissociation triggered by electron transfer can be controlled by switching the supporting electrolyte cation from TBA+ to Li+, which we find, leads to the complete suppression of formate production and results in H2 evolution instead. This ligand “dissociation-rebound” mechanism, coupled to environmental control, offers an alternate blueprint for designing earth-abundant, first-row transition metal based molecular electrocatalysts.
- 9 December 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessLigand Fluxionality in a Coordinatively Saturated Iron Complex Enables Selective Electrocatalytic Reduction of CO2 to Formate
Transition metal complexes for small molecule activation are typically designed with an open coordination site at the metal center for substrate binding and activation. Herein we show that a coordinatively saturated Fe(II) tris(bipyridine) complex, [L3Fe]2+ (L=2,2’-bipyridine, abbr. bpy), catalyzes the selective and facile electroreduction of CO2 to formate via electron transfer-induced ligand fluxionality of the bpy scaffold. In a coordinating solvent, electrochemical reduction induces partial dissociation of a bipyridine ligand, creating transient binding sites that enable CO2-to-formate conversion with <1% H2 at low overpotentials. Cyclic voltammetry, finite-element simulations and DFT calculations reveal that the timescale of ligand dissociation and coordinating properties of the dielectric medium are critical for the observed activity. We further show that the extent of bpy dissociation triggered by electron transfer can be controlled by switching the supporting electrolyte cation from TBA+ to Li+, which we find, leads to the complete suppression of formate production and results in H2 evolution instead. This ligand “dissociation-rebound” mechanism, coupled to environmental control, offers an alternate blueprint for designing earth-abundant, first-row transition metal based molecular electrocatalysts.
- 29 September 2025
- Published by American Chemical Society (ACS) in ACS Electrochemistry
- Vol. 1 (11) , 2364-2375
Interfacial Passivation in Anodeless Solid-State Batteries Enabled by a Porous, Li 2 O-Rich Interphase Generated from a Corrosion-Conversion Reaction
- 29 September 2025
- Published by American Chemical Society (ACS) in ACS Electrochemistry
- Vol. 1 (11) , 2364-2375
Interfacial Passivation in Anodeless Solid-State Batteries Enabled by a Porous, Li 2 O-Rich Interphase Generated from a Corrosion-Conversion Reaction
- Open Access
- 24 February 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Extended Cycling Stability in an Anodeless Solid-State Battery at Ambient Pressure and Temperature Enabled by a Corroded, Reactive Interphase
Solid-state Li-ion batteries in the ‘anodeless’ configuration can lead to a significant increase in volumetric energy density compared to their liquid-electrolyte based counterparts. However, challenges related to the electrochemical stability of highly Li+ -conductive solid-state electrolytes need to be resolved to improve cyclability. Herein, we present a scalable, solution-phase interfacial engineering approach to generate a porous surface layer on the Cu current collector via a corrosion reaction involving the controlled hydrolysis of LiPF6 salt in EC-DEC at elevated temperatures. The optimal corrosion protocol results in a uniform reaction depth on the Cu foil with a reaction layer comprising of fluorides and oxides of Cu and Li. Subsequently, through a series of conversion reactions in a Li metal half-cell with Li1.3Al0.3Ti1.7(PO4)3 (LATP) as the solid-electrolyte, these F- and O-species on the porous interphase layer generated from Cu corrosion converted to lithium fluoride and lithium oxide, respectively, with the concomitant reduction of Cu(II) to its metallic form throughout the thickness of the interface layer. The reactive interphases are characterized with SEM, EDX, XPS and atom probe tomography along with electrochemical measure- ments to understand the composition, distribution, evolution and charge transfer properties during cycling. The unique interfacial microstructure consisting of a dense, well-adhered passivation layer resulted in a significantly improved coulombic efficiency of Li plating/stripping beyond 90% in an anodeless solid- state cell at ambient pressure and temperature.
- 24 February 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessExtended Cycling Stability in an Anodeless Solid-State Battery at Ambient Pressure and Temperature Enabled by a Corroded, Reactive Interphase
Solid-state Li-ion batteries in the ‘anodeless’ configuration can lead to a significant increase in volumetric energy density compared to their liquid-electrolyte based counterparts. However, challenges related to the electrochemical stability of highly Li+ -conductive solid-state electrolytes need to be resolved to improve cyclability. Herein, we present a scalable, solution-phase interfacial engineering approach to generate a porous surface layer on the Cu current collector via a corrosion reaction involving the controlled hydrolysis of LiPF6 salt in EC-DEC at elevated temperatures. The optimal corrosion protocol results in a uniform reaction depth on the Cu foil with a reaction layer comprising of fluorides and oxides of Cu and Li. Subsequently, through a series of conversion reactions in a Li metal half-cell with Li1.3Al0.3Ti1.7(PO4)3 (LATP) as the solid-electrolyte, these F- and O-species on the porous interphase layer generated from Cu corrosion converted to lithium fluoride and lithium oxide, respectively, with the concomitant reduction of Cu(II) to its metallic form throughout the thickness of the interface layer. The reactive interphases are characterized with SEM, EDX, XPS and atom probe tomography along with electrochemical measure- ments to understand the composition, distribution, evolution and charge transfer properties during cycling. The unique interfacial microstructure consisting of a dense, well-adhered passivation layer resulted in a significantly improved coulombic efficiency of Li plating/stripping beyond 90% in an anodeless solid- state cell at ambient pressure and temperature.
- 29 January 2025
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 27 (8) , 4398-4406
Influence of internal electrostatics on reduction potentials in amine-ligated bimetallic copper complexes
In a series of bis-Cu(ii) complexes, we quantify the distance dependent electrostatic contributions to the reduction potential, which vary linearly as the reciprocal of the Cu–Cu distance (rCu–Cu), and span more than 0.5 V depending on rCu–Cu.
- 29 January 2025
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 27 (8) , 4398-4406
Influence of internal electrostatics on reduction potentials in amine-ligated bimetallic copper complexes
In a series of bis-Cu(ii) complexes, we quantify the distance dependent electrostatic contributions to the reduction potential, which vary linearly as the reciprocal of the Cu–Cu distance (rCu–Cu), and span more than 0.5 V depending on rCu–Cu.
- 1 January 2025
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 172 (1) , 010503
A High Energy Density, Non-Flow Zinc Bromine Battery Enabled by a Solubility Product Optimization Strategy
The non-flow zinc-bromine battery (ZBB) is a promising, energy-dense alternative to lead-acid batteries for stationary storage applications. Yet it is plagued by instabilities related to self-discharge and corrosion caused by Br2, which is the product of charging. We report an energy-dense, non-flow ZBB achieved through a systematic screening of tetraalkylammonium halide (QX, where Q = tetraalkylammonium, X=Br–, Cl–) based Br2 trapping agents via solubility product measurements of the respective charged products, i.e. QBr3, simultaneously optimizing for the highest achievable ZnBr2 + QX concentration to maximize cell capacity. Through this strategy, we found that tetraethylammonium chloride (TEACl) provided an optimal bromine trapping ability while enabling high ZnBr2 solubility via the suppression of (TEA)2[ZnX4] formation. These attributes led to enhanced coulombic efficiency, lower charge/discharge hysteresis, and improved capacity retention at high states of charge as compared to other quaternary ammonium salts. Using porous carbon electrodes in a low-cost, stackable cell design that enables refurbishment of all the cell components, we were able to achieve extended cycling stability and a cell level energy density of 154 Wh kg−1.
- 1 January 2025
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 172 (1) , 010503
A High Energy Density, Non-Flow Zinc Bromine Battery Enabled by a Solubility Product Optimization Strategy
The non-flow zinc-bromine battery (ZBB) is a promising, energy-dense alternative to lead-acid batteries for stationary storage applications. Yet it is plagued by instabilities related to self-discharge and corrosion caused by Br2, which is the product of charging. We report an energy-dense, non-flow ZBB achieved through a systematic screening of tetraalkylammonium halide (QX, where Q = tetraalkylammonium, X=Br–, Cl–) based Br2 trapping agents via solubility product measurements of the respective charged products, i.e. QBr3, simultaneously optimizing for the highest achievable ZnBr2 + QX concentration to maximize cell capacity. Through this strategy, we found that tetraethylammonium chloride (TEACl) provided an optimal bromine trapping ability while enabling high ZnBr2 solubility via the suppression of (TEA)2[ZnX4] formation. These attributes led to enhanced coulombic efficiency, lower charge/discharge hysteresis, and improved capacity retention at high states of charge as compared to other quaternary ammonium salts. Using porous carbon electrodes in a low-cost, stackable cell design that enables refurbishment of all the cell components, we were able to achieve extended cycling stability and a cell level energy density of 154 Wh kg−1.
- 15 November 2024
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 7 (23) , 27336-27343
Nanocarbon Florets with Synthetically Tunable Porosity as High-Rate Anodes for Li-ion Batteries
- 15 November 2024
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 7 (23) , 27336-27343
Nanocarbon Florets with Synthetically Tunable Porosity as High-Rate Anodes for Li-ion Batteries