Shaoqu Xie
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Shaoqu Xie has a total of 111 co-authors. Here are the top co-authors by number of shared publications:
- Xueqing Qiu
Guangdong University of Technology
13 shared publications Zhuoxi Li
12 shared publicationsConghua Yi
11 shared publications- Conghua Yi
School of Chemistry and Chemical Engineering South China University of Technology No. 381 Wushan Road Guangzhou 510640 P. R. China
9 shared publications Chuhan Fu
The Gene and Linda Voiland School of Chemical Engineering and Bioengineering Washington State University Pullman WA USA
7 shared publicationsHao Huang
7 shared publications
Latest Publications
- 11 September 2026
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 65 (37) , 19979-19994
Cooperative Hydration and Hydrogen-Bond Regulation in Salt–Sugar Hybrid Media Enables Exceptional Alcohol–Water Demixing
Efficient recovery of biobutanol from concentrated fermentation broths is hindered by strong alcohol–water interactions and azeotrope formation. Herein, salt–sugar hybrid systems composed of glucose and potassium salts were developed to investigate the synergistic effects of salting-out and sugaring-out in butanol–water mixtures. Different from single salting-out or sugaring-out systems that suffer from saturation limitation at low total solute concentration, this work reveals a cooperative solvation regulation mechanism combining ionic hydration and hydrogen-bond network reconstruction, and realizes an expanded effective phase-separation operating window up to 700 g·kg–1. The hybrid systems significantly enhanced phase separation, achieving butanol recoveries above 99.5%, dehydration efficiencies up to 96%, and water contents as low as 2.28 wt % in the butanol-rich phase. Mechanistic studies revealed that highly hydrated salt ions strongly compete for water molecules, while glucose regulates the hydrogen-bond network and stabilizes phase interfaces. Such salt–sugar complementarity alleviates high-salt-induced viscosity rise and phase-interface deterioration, avoiding premature separation saturation of single-agent systems. This cooperative solvation regulation weakens alcohol–water association, promotes liquid–liquid demixing, and expands the effective phase-separation region. The findings not only provide fundamental insights into coupled salting-out and sugaring-out phenomena, but also offer a green, energy-efficient strategy with great application potential for biofuel purification and alcohol dehydration in practical fermentation–separation coupling processes.
- 11 September 2026
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 65 (37) , 19979-19994
Cooperative Hydration and Hydrogen-Bond Regulation in Salt–Sugar Hybrid Media Enables Exceptional Alcohol–Water Demixing
Efficient recovery of biobutanol from concentrated fermentation broths is hindered by strong alcohol–water interactions and azeotrope formation. Herein, salt–sugar hybrid systems composed of glucose and potassium salts were developed to investigate the synergistic effects of salting-out and sugaring-out in butanol–water mixtures. Different from single salting-out or sugaring-out systems that suffer from saturation limitation at low total solute concentration, this work reveals a cooperative solvation regulation mechanism combining ionic hydration and hydrogen-bond network reconstruction, and realizes an expanded effective phase-separation operating window up to 700 g·kg–1. The hybrid systems significantly enhanced phase separation, achieving butanol recoveries above 99.5%, dehydration efficiencies up to 96%, and water contents as low as 2.28 wt % in the butanol-rich phase. Mechanistic studies revealed that highly hydrated salt ions strongly compete for water molecules, while glucose regulates the hydrogen-bond network and stabilizes phase interfaces. Such salt–sugar complementarity alleviates high-salt-induced viscosity rise and phase-interface deterioration, avoiding premature separation saturation of single-agent systems. This cooperative solvation regulation weakens alcohol–water association, promotes liquid–liquid demixing, and expands the effective phase-separation region. The findings not only provide fundamental insights into coupled salting-out and sugaring-out phenomena, but also offer a green, energy-efficient strategy with great application potential for biofuel purification and alcohol dehydration in practical fermentation–separation coupling processes.
- 21 July 2026
- Published by Elsevier in Polymer Degradation and Stability
- Vol. 252
Depolymerization of polylactic acid through salt-engineered carbon catalysis
- 21 July 2026
- Published by Elsevier in Polymer Degradation and Stability
- Vol. 252
Depolymerization of polylactic acid through salt-engineered carbon catalysis
- 1 May 2026
- Published by Elsevier in Food Chemistry
- Vol. 517, 149479
Transforming seafood processing residues into a circular blue bioeconomy: modern advances, integrated pathways and industrial translation
- 1 May 2026
- Published by Elsevier in Food Chemistry
- Vol. 517, 149479
Transforming seafood processing residues into a circular blue bioeconomy: modern advances, integrated pathways and industrial translation
- 30 March 2026
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 65 (13) , 7141-7155
Simulation-Enabled Process Integration for Simultaneous Solvent Recovery and Plastic Valorization via Salting-Out and Catalytic Conversion
- 30 March 2026
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 65 (13) , 7141-7155
Simulation-Enabled Process Integration for Simultaneous Solvent Recovery and Plastic Valorization via Salting-Out and Catalytic Conversion
- 15 January 2026
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 28 (6) , 2878-2893
Renewable lignosulfonate salts drive green and efficient acetone, n -butanol, and ethanol (ABE) separation
Here, we propose lignosulfonate-based salts (NaLS and CaLS) as renewable, eco-friendly salting-out agents to achieve energy-efficient ABE purification.
- 15 January 2026
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 28 (6) , 2878-2893
Renewable lignosulfonate salts drive green and efficient acetone, n -butanol, and ethanol (ABE) separation
Here, we propose lignosulfonate-based salts (NaLS and CaLS) as renewable, eco-friendly salting-out agents to achieve energy-efficient ABE purification.
- 9 December 2025
- Published by Wiley in AIChE Journal
- Vol. 72 (3)
Integration of biofuel extraction and biorefinery carbon dioxide capture for closed‐loop salt recycling to reduce carbon emission
Combining CO 2 capture with sustainable salt recovery in biofuel production is a promising strategy to address environmental and economic challenges in biorefinery. This study demonstrates a closed‐loop system that utilizes K 2 CO 3 as a bifunctional agent for both separation and purification of acetone–1‐butanol–ethanol (ABE) solution and CO 2 capture from biofuel fermentation. Salt reuse and CO 2 sequestration were achieved by reacting CO 2 with salted K 2 CO 3 ‐rich aqueous phase to form KHCO 3 . The experimental results showed that K 2 CO 3 could achieve efficient ABE separation (>99% recovery of 1‐butanol at 500 g/kg) and CO 2 utilization reached 88% under optimal conditions (stirring rate of 1100 r/min, gas flow rate of 40 mL/min). Salt recovery stabilized at 84%, which was limited by KHCO 3 solubility and ionic strength. This research provides a scalable blueprint for sustainable biofuel production by addressing the twin challenges of resource waste and carbon emissions.
- 9 December 2025
- Published by Wiley in AIChE Journal
- Vol. 72 (3)
Integration of biofuel extraction and biorefinery carbon dioxide capture for closed‐loop salt recycling to reduce carbon emission
Combining CO 2 capture with sustainable salt recovery in biofuel production is a promising strategy to address environmental and economic challenges in biorefinery. This study demonstrates a closed‐loop system that utilizes K 2 CO 3 as a bifunctional agent for both separation and purification of acetone–1‐butanol–ethanol (ABE) solution and CO 2 capture from biofuel fermentation. Salt reuse and CO 2 sequestration were achieved by reacting CO 2 with salted K 2 CO 3 ‐rich aqueous phase to form KHCO 3 . The experimental results showed that K 2 CO 3 could achieve efficient ABE separation (>99% recovery of 1‐butanol at 500 g/kg) and CO 2 utilization reached 88% under optimal conditions (stirring rate of 1100 r/min, gas flow rate of 40 mL/min). Salt recovery stabilized at 84%, which was limited by KHCO 3 solubility and ionic strength. This research provides a scalable blueprint for sustainable biofuel production by addressing the twin challenges of resource waste and carbon emissions.
- 9 November 2025
- Published by Wiley in Journal of Chemical Technology & Biotechnology
From azeotropes to dehydrated alcohols: dual‐stage salt separation of isobutanol and ethanol for green biorefining
BACKGROUND: The efficient separation of isobutanol–ethanol–water azeotropes remains a critical bottleneck in the advancement of sustainable isobutanol production, where conventional distillation is both energy‐intensive and inefficient. Here, we report a low‐energy, salt‐assisted separation strategy employing alkaline potassium salts, with K 2 CO 3 demonstrating exceptional dewatering capability. RESULTS: Under near‐saturation conditions, a single‐step salting‐out process enables the recovery of over 99.8 wt% of isobutanol and ethanol from aqueous mixtures. However, due to the inherent limitations of the salting‐out equilibrium, a one‐step process cannot fully eliminate residual water. To address this, we introduce a sequential two‐step salting‐out strategy, which reduces the water content in the organic‐rich phase to 3.44 wt%, effectively surpassing the dehydration performance of conventional methods. CONCLUSION: Through this method, a traditional distillation can be replaced by a scalable, energy‐efficient, and industrially feasible purification method, which can lead to a paradigm change in the recovery of alcohols from azeotropic mixtures. © 2025 Society of Chemical Industry (SCI).
- 9 November 2025
- Published by Wiley in Journal of Chemical Technology & Biotechnology
From azeotropes to dehydrated alcohols: dual‐stage salt separation of isobutanol and ethanol for green biorefining
BACKGROUND: The efficient separation of isobutanol–ethanol–water azeotropes remains a critical bottleneck in the advancement of sustainable isobutanol production, where conventional distillation is both energy‐intensive and inefficient. Here, we report a low‐energy, salt‐assisted separation strategy employing alkaline potassium salts, with K 2 CO 3 demonstrating exceptional dewatering capability. RESULTS: Under near‐saturation conditions, a single‐step salting‐out process enables the recovery of over 99.8 wt% of isobutanol and ethanol from aqueous mixtures. However, due to the inherent limitations of the salting‐out equilibrium, a one‐step process cannot fully eliminate residual water. To address this, we introduce a sequential two‐step salting‐out strategy, which reduces the water content in the organic‐rich phase to 3.44 wt%, effectively surpassing the dehydration performance of conventional methods. CONCLUSION: Through this method, a traditional distillation can be replaced by a scalable, energy‐efficient, and industrially feasible purification method, which can lead to a paradigm change in the recovery of alcohols from azeotropic mixtures. © 2025 Society of Chemical Industry (SCI).
- Open Access
- 21 October 2025
- Published by Innovation Forever Publishing Group Limited in Innovation Discovery
- Vol. 2 (4)
Techno-economic Analysis of Jet Fuel Production from Vegetable Oil Using Self-produced Solvent and Non-noble Metallic Catalyst
Biojet fuel has been successfully utilized in commercial flights. However, the widespread adoption of biojet fuel still presents certain challenges, one of the most significant of which is the high cost of the production process. This is primarily reflected in the fact that the production of commercial biojet fuel necessitates the operation of a high-temperature environment and multiple reaction units, which increases operational costs. Consequently, the development of an efficient and cost-effective process paves the way for the industrialization of biofuels. A novel biphasic catalytic process has been developed that can scale down the multiple unit operations of the process line and perform process simulation in Aspen Plus. In addition, inexpensive nickel-based catalyst is proposed as the catalyst instead of precious metal catalysts. The process utilizes the intermediate product, n-heptadecane, and water as a novel mixed solvent to achieve a new biphasic catalytic process for the one-pot production of biojet fuels under mild conditions. A comparison of two similar innovative options was carried out through a series of analyses of raw material costs, capital costs, operating costs, product selling prices, and net present value. These analyses demonstrated that Scenario 2 with a nickel-based catalyst and self-produced solvent was more economical. The selling price of jet paraffin was calculated to be lower than 2300 $/tonne based on market data, with a payback period of 1~2 years. Reducing feedstock costs represents a viable strategy for improving the economics of biojet fuels.
- 21 October 2025
- Published by Innovation Forever Publishing Group Limited in Innovation Discovery
- Vol. 2 (4)
Open AccessTechno-economic Analysis of Jet Fuel Production from Vegetable Oil Using Self-produced Solvent and Non-noble Metallic Catalyst
Biojet fuel has been successfully utilized in commercial flights. However, the widespread adoption of biojet fuel still presents certain challenges, one of the most significant of which is the high cost of the production process. This is primarily reflected in the fact that the production of commercial biojet fuel necessitates the operation of a high-temperature environment and multiple reaction units, which increases operational costs. Consequently, the development of an efficient and cost-effective process paves the way for the industrialization of biofuels. A novel biphasic catalytic process has been developed that can scale down the multiple unit operations of the process line and perform process simulation in Aspen Plus. In addition, inexpensive nickel-based catalyst is proposed as the catalyst instead of precious metal catalysts. The process utilizes the intermediate product, n-heptadecane, and water as a novel mixed solvent to achieve a new biphasic catalytic process for the one-pot production of biojet fuels under mild conditions. A comparison of two similar innovative options was carried out through a series of analyses of raw material costs, capital costs, operating costs, product selling prices, and net present value. These analyses demonstrated that Scenario 2 with a nickel-based catalyst and self-produced solvent was more economical. The selling price of jet paraffin was calculated to be lower than 2300 $/tonne based on market data, with a payback period of 1~2 years. Reducing feedstock costs represents a viable strategy for improving the economics of biojet fuels.
- 13 August 2025
- Published by Wiley in AIChE Journal
- Vol. 71 (11)
Low‐temperature hydrodeoxygenation of fatty acids to biodiesel via Ru–Mo strong metal‐support interaction
Strong metal‐support interaction (SMSI) significantly influences the catalytic activity, selectivity, and stability through the geometric and electronic effects of a catalyst. We herein develop a stable Ru0−Moδ+ catalyst for the hydrodeoxygenation (HDO) of fatty acids to alkanes (2.5 μmol g−1cat h−1) at low to room temperatures, meanwhile demonstrating its general applicability to various complex fatty acids. Kinetic studies and reaction pathway analysis revealed that the Ru–Mo SMSI significantly reduced the reaction activation energy by altering the HDO pathways. Mechanistic studies indicate that electron transfer occurs between the active Ru nanoclusters and the Moδ+ support, which enhances catalytic activity by promoting the adsorption of RCOO* at the Ru0−Moδ+ interface. Our research establishes an efficient Ru–Mo catalyst for biomass upgrading at low temperatures and calls for reassessing the electronic effects in the M0‐Mδ+ interfacial catalysis model.
- 13 August 2025
- Published by Wiley in AIChE Journal
- Vol. 71 (11)
Low‐temperature hydrodeoxygenation of fatty acids to biodiesel via Ru–Mo strong metal‐support interaction
Strong metal‐support interaction (SMSI) significantly influences the catalytic activity, selectivity, and stability through the geometric and electronic effects of a catalyst. We herein develop a stable Ru0−Moδ+ catalyst for the hydrodeoxygenation (HDO) of fatty acids to alkanes (2.5 μmol g−1cat h−1) at low to room temperatures, meanwhile demonstrating its general applicability to various complex fatty acids. Kinetic studies and reaction pathway analysis revealed that the Ru–Mo SMSI significantly reduced the reaction activation energy by altering the HDO pathways. Mechanistic studies indicate that electron transfer occurs between the active Ru nanoclusters and the Moδ+ support, which enhances catalytic activity by promoting the adsorption of RCOO* at the Ru0−Moδ+ interface. Our research establishes an efficient Ru–Mo catalyst for biomass upgrading at low temperatures and calls for reassessing the electronic effects in the M0‐Mδ+ interfacial catalysis model.
- 31 July 2025
- Published by Wiley in ChemSusChem
- Vol. 18 (18) , e202500851
Controlling Reaction Paths with Ru–Ni Alloys: C–O Retention for Alcohol Synthesis
Ru‐based catalysts are widely used in catalytic reactions, but the electron‐deficient nature promotes strong decarbonylation, leading to complete deoxygenation during the conversion of polyhydroxy biomass. Despite extensive research, effectively suppressing this decarbonylation activity remains challenging. Herein, electron‐rich Ru and electron‐deficient Ni formed due to the electron migration of Ni → Ru have a synergistic catalytic effect, controlling the precise cleavage of CN bonds by Ru 0 and retaining most of the CO bonds. The amorphous Al 2 O 3 is sufficiently bound to the substrate to promote rapid hydrogenation. This modification effectively suppresses the intrinsic decarbonylation activity of Ru and improves selectivity for hydrodeoxygenation. Using carbohydrates as substrates, the Ru–Ni bimetallic catalysts preferentially promote the hydrodeoxygenation pathway, resulting in a significant increase in C3+ monohydric alcohol yields. This work presents a new strategy for modulating reaction pathways via electronic structure engineering, offering valuable insights into the potential of Ru–Ni systems for biomass conversion and sustainable alcohol synthesis.
- 31 July 2025
- Published by Wiley in ChemSusChem
- Vol. 18 (18) , e202500851
Controlling Reaction Paths with Ru–Ni Alloys: C–O Retention for Alcohol Synthesis
Ru‐based catalysts are widely used in catalytic reactions, but the electron‐deficient nature promotes strong decarbonylation, leading to complete deoxygenation during the conversion of polyhydroxy biomass. Despite extensive research, effectively suppressing this decarbonylation activity remains challenging. Herein, electron‐rich Ru and electron‐deficient Ni formed due to the electron migration of Ni → Ru have a synergistic catalytic effect, controlling the precise cleavage of CN bonds by Ru 0 and retaining most of the CO bonds. The amorphous Al 2 O 3 is sufficiently bound to the substrate to promote rapid hydrogenation. This modification effectively suppresses the intrinsic decarbonylation activity of Ru and improves selectivity for hydrodeoxygenation. Using carbohydrates as substrates, the Ru–Ni bimetallic catalysts preferentially promote the hydrodeoxygenation pathway, resulting in a significant increase in C3+ monohydric alcohol yields. This work presents a new strategy for modulating reaction pathways via electronic structure engineering, offering valuable insights into the potential of Ru–Ni systems for biomass conversion and sustainable alcohol synthesis.