Jose M. Villalvilla
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Jose M. Villalvilla has a total of 158 co-authors. Here are the top co-authors by number of shared publications:
- Maria Angeles Diaz-Garcia
Dpto. Física and Instituto Universitario De Materiales de Alicante (IUMA) Universidad De Alicante Alicante Spain
51 shared publications José A. Quintana
Dpto. Óptica Farmacología y Anatomía and IUMA, Universidad de Alicante Alicante 03080 Spain
41 shared publicationsPedro G. Boj
Dpto. Óptica, Farmacología y Anatomía and IUMA Universidad de Alicante Alicante 03080 Spain
33 shared publications- Santos Merino
TEKNIKER, Basque Research and Technology Alliance (BRTA), C/ Iñaki Goenaga 5, 20600 Eibar, Spain
14 shared publications Eva M. Calzado
Dpto. Física, Ingeniería de Sistemas y Teoría de la Señal and Instituto Universitario de Materiales de Alicante (IUMA), Universidad de Alicante, Alicante-03080, Spain
13 shared publications- Marta Morales-Vidal
Instituto Universitario de Física Aplicada a las Ciencias y las Tecnologías, Universidad de Alicante, Carretera San Vicente del Raspeig s/n, 03690 San Vicente del Raspeig, Spain
12 shared publications
Latest Publications
- Open Access
- 13 February 2025
- Published by Wiley in Advanced Optical Materials
- Vol. 13 (11)
Improved Laser Performance of Carbon‐Bridged Oligo(p‐phenylenevinylene)s Through σ‐π Conjugation with Silyl Groups
All‐solution processed organic distributed feedback (DFB) lasers are attractive devices for a variety of applications. Among many classes of active laser materials, carbon‐bridged oligo(p‐phenylenevinylene)s (COPVm), particularly those with repeating unit of m ≥ 3, have demonstrated well‐balanced and excellent performance for that purpose. However, the blue‐emitting shorter COPVm (with m = 1,2) face significant challenges in terms of photostability and excitation energy for lasing (threshold). Here, the effectiveness of σ‐π conjugation to improve these properties of COPV2 is demonstrated by functionalizing its terminal positions with silyl groups. This study includes the synthesis and optical characterization of two COPV2 derivates, COPV2–Sin (n = 1 and 2) dispersed in polystyrene films. Both compounds show amplified spontaneous emission (ASE) at ≈480 nm over a wide range of concentrations (1–30 wt.%), with COPV2–Si2 exhibiting a lower ASE threshold and longer operational durability than parent COPV2. The potential of these materials has been further demonstrated through the construction of DFB lasers with top‐layer polymeric resonators.
- 13 February 2025
- Published by Wiley in Advanced Optical Materials
- Vol. 13 (11)
Open AccessImproved Laser Performance of Carbon‐Bridged Oligo(p‐phenylenevinylene)s Through σ‐π Conjugation with Silyl Groups
All‐solution processed organic distributed feedback (DFB) lasers are attractive devices for a variety of applications. Among many classes of active laser materials, carbon‐bridged oligo(p‐phenylenevinylene)s (COPVm), particularly those with repeating unit of m ≥ 3, have demonstrated well‐balanced and excellent performance for that purpose. However, the blue‐emitting shorter COPVm (with m = 1,2) face significant challenges in terms of photostability and excitation energy for lasing (threshold). Here, the effectiveness of σ‐π conjugation to improve these properties of COPV2 is demonstrated by functionalizing its terminal positions with silyl groups. This study includes the synthesis and optical characterization of two COPV2 derivates, COPV2–Sin (n = 1 and 2) dispersed in polystyrene films. Both compounds show amplified spontaneous emission (ASE) at ≈480 nm over a wide range of concentrations (1–30 wt.%), with COPV2–Si2 exhibiting a lower ASE threshold and longer operational durability than parent COPV2. The potential of these materials has been further demonstrated through the construction of DFB lasers with top‐layer polymeric resonators.
- Open Access
- 8 August 2024
- Published by Wiley in Advanced Optical Materials
- Vol. 12 (28)
Top‐Layer Resonator Organic Distributed Feedback Laser for Label‐Free Refractive Index Sensing
Surface‐emitting organic distributed feedback (DFB) lasers are attractive devices for label‐free sensing applications. Of particular interest for cost‐reduction purposes are devices in which both active material and resonator are based on solution‐processable polymeric materials. Here, the capability for label‐free refractive index sensing of DFB devices consisting of top‐layer resonators (1D relief gratings) of dichromated gelatin layers is reported, deposited on top of active films of polystyrene doped with perylene orange. The devices show successful operation for both transversal electric and transversal magnetic modes, with a larger sensor sensibility for the latter (Sb = 38 nm RIU−1). The overall device operation (emission laser wavelength, laser threshold in addition to the sensitivity) has been optimized through the adjustment of the active film thickness and the grating period. This is possible thanks to the versatility offered by the holographic procedure used to fabricate the resonator, and to the top‐layer resonator geometry. Remarkably, the fact that the resonator is based on gelatin (a food‐grade biopolymer), offers great potential for the development of wearable and bio‐compatible sensing applications.
- 8 August 2024
- Published by Wiley in Advanced Optical Materials
- Vol. 12 (28)
Open AccessTop‐Layer Resonator Organic Distributed Feedback Laser for Label‐Free Refractive Index Sensing
Surface‐emitting organic distributed feedback (DFB) lasers are attractive devices for label‐free sensing applications. Of particular interest for cost‐reduction purposes are devices in which both active material and resonator are based on solution‐processable polymeric materials. Here, the capability for label‐free refractive index sensing of DFB devices consisting of top‐layer resonators (1D relief gratings) of dichromated gelatin layers is reported, deposited on top of active films of polystyrene doped with perylene orange. The devices show successful operation for both transversal electric and transversal magnetic modes, with a larger sensor sensibility for the latter (Sb = 38 nm RIU−1). The overall device operation (emission laser wavelength, laser threshold in addition to the sensitivity) has been optimized through the adjustment of the active film thickness and the grating period. This is possible thanks to the versatility offered by the holographic procedure used to fabricate the resonator, and to the top‐layer resonator geometry. Remarkably, the fact that the resonator is based on gelatin (a food‐grade biopolymer), offers great potential for the development of wearable and bio‐compatible sensing applications.
- Open Access
- 15 July 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 12 (30) , 11335-11339
Precise patterning of gold nanoparticle gratings on gelatin films
A method (based on holographic lithography, dry etching and temperature annealing) to fabricate gold nanoparticles in gelatin films and pattern them into gratings with periods down to 200 nm, controlling the size and particle distribution.
- 15 July 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 12 (30) , 11335-11339
Open AccessPrecise patterning of gold nanoparticle gratings on gelatin films
A method (based on holographic lithography, dry etching and temperature annealing) to fabricate gold nanoparticles in gelatin films and pattern them into gratings with periods down to 200 nm, controlling the size and particle distribution.
- Open Access
- 16 July 2021
- Published by Wiley in Advanced Functional Materials
- Vol. 31 (41) , 2105073
Near‐Infrared Lasing in Four‐Zigzag Edged Nanographenes by 1D versus 2D Electronic π‐Conjugation
The search of compounds emitting in the near‐infrared (NIR) has been accelerated owing to their use in biomedical and telecommunications applications. In this regard, nanographenes (NGs) are attractive materials adequate for integration with other technologies, which have recently demonstrated amplified spontaneous emission (ASE) and lasing across the visible spectrum. Here, the optical and ASE properties of four‐zigzag edged NGs of the [m,n]peri‐acenoacene family are reported, whose size is increased through conjugation extension by varying n (from 3 to 5) while keeping m = 2. Results show that such 1D conjugation extension method is more efficient in terms of shifting the photoluminescence (PL) to the infrared (PL at 710 nm in the larger compound, PP‐Ar) than through 2D conjugation extension as in previously reported NGs (PL at 676 nm with the largest compound FZ3, with n = 3 and m = 4). Additionally, PP‐Ar shows dual‐ASE (at 726 and 787 nm), whose origin is elucidated through Raman and transient absorption spectroscopies. These compounds’ potential for red and NIR lasing is demonstrated through the fabrication of distributed feedback lasers with top‐layer resonators. This study paves the way towards the development of stable low‐cost all‐plastic NIR lasers.
- 16 July 2021
- Published by Wiley in Advanced Functional Materials
- Vol. 31 (41) , 2105073
Open AccessNear‐Infrared Lasing in Four‐Zigzag Edged Nanographenes by 1D versus 2D Electronic π‐Conjugation
The search of compounds emitting in the near‐infrared (NIR) has been accelerated owing to their use in biomedical and telecommunications applications. In this regard, nanographenes (NGs) are attractive materials adequate for integration with other technologies, which have recently demonstrated amplified spontaneous emission (ASE) and lasing across the visible spectrum. Here, the optical and ASE properties of four‐zigzag edged NGs of the [m,n]peri‐acenoacene family are reported, whose size is increased through conjugation extension by varying n (from 3 to 5) while keeping m = 2. Results show that such 1D conjugation extension method is more efficient in terms of shifting the photoluminescence (PL) to the infrared (PL at 710 nm in the larger compound, PP‐Ar) than through 2D conjugation extension as in previously reported NGs (PL at 676 nm with the largest compound FZ3, with n = 3 and m = 4). Additionally, PP‐Ar shows dual‐ASE (at 726 and 787 nm), whose origin is elucidated through Raman and transient absorption spectroscopies. These compounds’ potential for red and NIR lasing is demonstrated through the fabrication of distributed feedback lasers with top‐layer resonators. This study paves the way towards the development of stable low‐cost all‐plastic NIR lasers.
- Open Access
- 1 August 2019
- Published by Springer Nature in Scientific Reports
- Vol. 9 (1) , 1-10
Controlling the emission properties of solution-processed organic distributed feedback lasers through resonator design
Surface-emitting distributed feedback (DFB) lasers with both, resonator and active material based on solution-processable polymers, are attractive light sources for a variety of low-cost applications. Besides, the lasers should have competitive characteristics compared to devices based on high-quality inorganic resonators. Here, we report high performing all-solution-processed organic DFB lasers, consisting of water-processed photoresist layers with surface relief gratings located over the active films, whose emission properties can be finely tuned through resonator design. Their laser threshold and efficiency are simultaneously optimized by proper selection of residual resist thickness and grating depth, d. Lowest thresholds and largest efficiencies are obtained when there is no residual layer, while a trade-off between threshold and efficiency is found in relation to d, because both parameters decrease with decreasing d. This behaviour is successfully explained in terms of an overlap factor r, defined to quantify the interaction strength between the grating and the light emitted by the active film and traveling along it, via the evanescent field. It is found that optimal grating depths are in the range 100–130 nm (r ~ 0.5−0.4). Overall, this study provides comprehensive design rules towards an accurate control of the emission properties of the reported lasers.
- 1 August 2019
- Published by Springer Nature in Scientific Reports
- Vol. 9 (1) , 1-10
Open AccessControlling the emission properties of solution-processed organic distributed feedback lasers through resonator design
Surface-emitting distributed feedback (DFB) lasers with both, resonator and active material based on solution-processable polymers, are attractive light sources for a variety of low-cost applications. Besides, the lasers should have competitive characteristics compared to devices based on high-quality inorganic resonators. Here, we report high performing all-solution-processed organic DFB lasers, consisting of water-processed photoresist layers with surface relief gratings located over the active films, whose emission properties can be finely tuned through resonator design. Their laser threshold and efficiency are simultaneously optimized by proper selection of residual resist thickness and grating depth, d. Lowest thresholds and largest efficiencies are obtained when there is no residual layer, while a trade-off between threshold and efficiency is found in relation to d, because both parameters decrease with decreasing d. This behaviour is successfully explained in terms of an overlap factor r, defined to quantify the interaction strength between the grating and the light emitted by the active film and traveling along it, via the evanescent field. It is found that optimal grating depths are in the range 100–130 nm (r ~ 0.5−0.4). Overall, this study provides comprehensive design rules towards an accurate control of the emission properties of the reported lasers.
- Open Access
- 25 July 2019
- Published by Springer Nature in Nature Communications
- Vol. 10 (1) , 1-10
Solution-processed nanographene distributed feedback lasers
The chemical synthesis of nanographene molecules constitutes the bottom-up approach toward graphene, simultaneously providing rational chemical design, structure-property control and exploitation of their semiconducting and luminescence properties. Here, we report nanographene-based lasers from three zigzag-edged polycyclic aromatics. The devices consist of a passive polymer film hosting the nanographenes and a top-layer polymeric distributed feedback resonator. Both the active material and the laser resonator are processed from solution, key for the purpose of obtaining low-cost devices with mechanical flexibility. The prepared lasers show narrow linewidth ( < 0.13 nm) emission at different spectral regions covering a large segment of the visible spectrum, and up to the vicinity of the near-infrared. They show outstandingly long operational lifetimes (above 105 pump pulses) and very low thresholds. These results represent a significant step forward in the field of graphene and broaden its versatility in low-cost devices implying light emission, such as lasers.
- 25 July 2019
- Published by Springer Nature in Nature Communications
- Vol. 10 (1) , 1-10
Open AccessSolution-processed nanographene distributed feedback lasers
The chemical synthesis of nanographene molecules constitutes the bottom-up approach toward graphene, simultaneously providing rational chemical design, structure-property control and exploitation of their semiconducting and luminescence properties. Here, we report nanographene-based lasers from three zigzag-edged polycyclic aromatics. The devices consist of a passive polymer film hosting the nanographenes and a top-layer polymeric distributed feedback resonator. Both the active material and the laser resonator are processed from solution, key for the purpose of obtaining low-cost devices with mechanical flexibility. The prepared lasers show narrow linewidth ( < 0.13 nm) emission at different spectral regions covering a large segment of the visible spectrum, and up to the vicinity of the near-infrared. They show outstandingly long operational lifetimes (above 105 pump pulses) and very low thresholds. These results represent a significant step forward in the field of graphene and broaden its versatility in low-cost devices implying light emission, such as lasers.
- 11 October 2018
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 122 (43) , 24896-24906
Influence of Blending Ratio and Polymer Matrix on the Lasing Properties of Perylenediimide Dyes
- 11 October 2018
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 122 (43) , 24896-24906
Influence of Blending Ratio and Polymer Matrix on the Lasing Properties of Perylenediimide Dyes
- 10 April 2018
- Published by Wiley in Advanced Optical Materials
- Vol. 6 (13)
Carbon‐Bridged p‐Phenylenevinylene Polymer for High‐Performance Solution‐Processed Distributed Feedback Lasers
Thin‐film organic lasers are attractive light sources for a variety of applications. Recently, it is reported that carbon‐bridged oligo(p‐phenylenevinylene)s (COPVn with repeating unit n = 1–6) function as unique laser dyes which combine high fluorescence efficiency, wavelength tunability, and both thermal and photostability, making them ideal for use in organic semiconductor lasers. However, in order to obtain such excellent properties, COPVn require blending in a matrix, such as a thermoplastic polymer, thus leading to miscibility issues, limited absorption, and charge transporting properties. Here, high‐performance lasers with a novel active polymer poly‐COPV1, based on the basic unit of COPV1 and prepared as a high‐quality neat film, are reported which overcome the trade‐off between the device performance and durability. The prepared lasers show thresholds 30 times lower and operational lifetimes 300 times longer than devices based on COPV1 dispersed in polystyrene. The low threshold operation allows the poly‐COPV1 lasers to be pumped by a nitride diode laser.
- 10 April 2018
- Published by Wiley in Advanced Optical Materials
- Vol. 6 (13)
Carbon‐Bridged p‐Phenylenevinylene Polymer for High‐Performance Solution‐Processed Distributed Feedback Lasers
Thin‐film organic lasers are attractive light sources for a variety of applications. Recently, it is reported that carbon‐bridged oligo(p‐phenylenevinylene)s (COPVn with repeating unit n = 1–6) function as unique laser dyes which combine high fluorescence efficiency, wavelength tunability, and both thermal and photostability, making them ideal for use in organic semiconductor lasers. However, in order to obtain such excellent properties, COPVn require blending in a matrix, such as a thermoplastic polymer, thus leading to miscibility issues, limited absorption, and charge transporting properties. Here, high‐performance lasers with a novel active polymer poly‐COPV1, based on the basic unit of COPV1 and prepared as a high‐quality neat film, are reported which overcome the trade‐off between the device performance and durability. The prepared lasers show thresholds 30 times lower and operational lifetimes 300 times longer than devices based on COPV1 dispersed in polystyrene. The low threshold operation allows the poly‐COPV1 lasers to be pumped by a nitride diode laser.
- 1 January 2018
- Published by Optica Publishing Group
- p. NoW2J.2
Latest Advances on Solution-processed Thin Film Organic Lasers
Latest advances from our research group towards improving the performance of solution-processed distributed feedback lasers will be discussed. They include advances on the laser material and the resonator and their application as optical sensors.
- 1 January 2018
- Published by Optica Publishing Group
- p. NoW2J.2
Latest Advances on Solution-processed Thin Film Organic Lasers
Latest advances from our research group towards improving the performance of solution-processed distributed feedback lasers will be discussed. They include advances on the laser material and the resonator and their application as optical sensors.
- 1 August 2017
- Published by Wiley in Advanced Optical Materials
- Vol. 5 (19)
An Efficient and Color‐Tunable Solution‐Processed Organic Thin‐Film Laser with a Polymeric Top‐Layer Resonator
Thin film organic lasers represent attractive light sources for numerous applications. Currently, efforts are devoted to the development of low‐cost high‐performance and color‐tunable devices, whereby both the resonator and the active layer should consist of solution‐processable organic materials. Herein, solution‐processed distributed‐feedback lasers are reported with polymeric resonators on top of active films of perylene orange or carbon‐bridged oligo(p‐phenylenevinylene) dispersed in polystyrene, which combine these properties. These lasers emit in the 520–595 nm range and show low thresholds (≈1 kW cm−2) and long operational lifetimes (7 × 105 pump pulses), which are comparable to other state‐of‐the‐art lasers that contain the same active materials but resonators made on inorganic substrates. Due to this top‐layer resonator configuration, the laser slope efficiencies of the present devices are remarkably superior. A centimeter‐size device emitting at different wavelengths within a broad spectral range, based on a perylene‐based film of uniform thickness that contributes to preserve a low threshold, is demonstrated.
- 1 August 2017
- Published by Wiley in Advanced Optical Materials
- Vol. 5 (19)
An Efficient and Color‐Tunable Solution‐Processed Organic Thin‐Film Laser with a Polymeric Top‐Layer Resonator
Thin film organic lasers represent attractive light sources for numerous applications. Currently, efforts are devoted to the development of low‐cost high‐performance and color‐tunable devices, whereby both the resonator and the active layer should consist of solution‐processable organic materials. Herein, solution‐processed distributed‐feedback lasers are reported with polymeric resonators on top of active films of perylene orange or carbon‐bridged oligo(p‐phenylenevinylene) dispersed in polystyrene, which combine these properties. These lasers emit in the 520–595 nm range and show low thresholds (≈1 kW cm−2) and long operational lifetimes (7 × 105 pump pulses), which are comparable to other state‐of‐the‐art lasers that contain the same active materials but resonators made on inorganic substrates. Due to this top‐layer resonator configuration, the laser slope efficiencies of the present devices are remarkably superior. A centimeter‐size device emitting at different wavelengths within a broad spectral range, based on a perylene‐based film of uniform thickness that contributes to preserve a low threshold, is demonstrated.